Liczymy pasujące modele…
Christmas Elf with Knitted Hat and Pom-Pom 🎄✨ Bring some Christmas magic into your home with this adorable little Christmas elf! Its cute design and textured knitted hat with a large pom-pom on top make it a charming addition to your…
This is an updated version of a previous design of mine which reflects the year change, as well as a few other minor tweaks. I have also included a set of beveled edge ornaments, to go with the original rounded edge version. You print a…
Print | Easy print. Orient both box models with the flat side down. Orient the ribbon on edge in a different color. Any material. Prints best with supports. Consider bridges oriented across the short length of the slot on the bottom of…
The model is printing in place. The Christmas tree is printed on the side as shown below. It can be printed without support.
A couple garden gnome figures. Patreon, for license: https://www.patreon.com/c/Stigern
Das Model kann ohne Stützstruktur gedruckt werden. Man benötigt nur etwas Kleber zum verbinden der Fixierungsstecker und der Ober und Unterseite so wie ein Led Teelicht. Ich habe es für dieses Teelicht Angepasst da es per USB-C nachladbar…
Something I made during 2020. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
A tree ornament I made a few years ago for a humanist organization. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. The number of perimeters is high because I found that it printed better…
A cute garden gnome, holding a bag! Patreon, for license: https://www.patreon.com/c/Stigern
Two happy christmas garden gnomes! I think they are fine decoration pieces. Use organic supports, preferably only on the build plate. Patreon, for license: https://www.patreon.com/c/Stigern
If printing the modeled support version I would suggest using finger nail cutter to remove whatever support material is left on the model. The curved cutting edge did a better job than my flush cutters.
Diameter and weight 2wall loops 15% infil- Star1 small 118mm, 11g Star1 big 153mm, 20g Star2 small118mm, 10g Star2 big 153mm, 20g HolderA 19mm, 9g HolderB 32mm, 12g HolderC 42mm, 20g
Model pověsé hvězdy na Vánoční stromek - Model of a hanging star on a Christmas tree
Set of 3 dwarfs Christmas tree decoration. Properties: 100mm x 133mm x 3mm Recommended print settings: 2-3 perimeters 100% infill 0.20mm layer height
I searched a lot for candy canes but none suited me, so I offer you my model entirely designed in NX. I could provide the source file .prt if you wish to make adjustments
Rotate it - it looks different from every angle! This ornament looks great in any color – solid, rainbow, multi-color, transparent, or glow-in-the-dark. There are 3 other ornaments in this series – a finial, a topper, and a “stretch”…
Christmas Tree Coaster Set with Truck Holder. Options for a 4 or 6-coaster set. Both AMS and non-AMS project versions are included. Print Settings Layer Height: 0.20 Walls: 2 Infill: 15% Supports: No Manual Color Swap Layers Truck 61:…
Wrapping Paper Cutter Makes cutting paper for the holidays super easy and painless. Requires (1) #11 Exacto Blade -PLA works great -20% infill -may need support for the one overhand depending on your printer Credit for the model goes to…
Bluey cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings: Line width:…
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
Cute Christmas Print for dog lovers. Single Nozzle with multiple color changes Prusa Slicer will use Logo option to separate layers which you then assign colors.
For all StarWars Fans I have designed a Decoration to put on your wall, your mantel piece and even your tree if your print the one with a hole! Enjoy and post makes for more models! Thanks!
This is a hollow D20 you can print in place and when it's done, hang up from the top (there's a 3mm hole) and fill with small things, like candy or regular sized dice. I tried to print it a few ways and ultimately rotated it so one number…
Tree for LED Tealight. Printed in Vase mode 120mm height - layer 0,16 180mm height - layer 0,2
Wall Art Christmas gift. Print: Nozzle: 0.4mm Layer height: 0.2 Infill: 15% Speed: 60mm/s Color change possible at 1.4mm! Printing slowly improves print quality! I used PLA for printing. Weihnachtsgeschenke Druck: Düse: 0,4 mm…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
Customizable LED Color Filter for Dollarama Mini Battery-Powered Lights Description: Elevate your Dollarama mini battery-powered LED lights with this easy-to-use colour filter system! Designed to be compatible with the affordable white…
3D scan V bgcode jsou stromové podpěry - In bgcode there are tree supports PLA Mistic Brown Prusament
A snowman i made in freecad. I also included the freecad files for any further editing and a 3mf already colored for a bambu a1
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
Christmas Corner Snowflakes change the layers to change the colour combo, takes ~3hrs to print. Fun piece to give instead of Christmas card.
This small stud for the large lego wreath has added small detail with a snowflake.
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Print Settings: • Recommended Material: PLA, PETG, or any sturdy Supports: Not required. Supports: Not For a beautiful finish, print with white filament or vibrant colors. • If planning to use it outdoors, PETG or a weather-resistant…
The Christmas Santa Tealight Holder is a delightful 3D printable model designed to spread festive cheer. Its intricate design captures Santa Claus on his sleigh, pulled by reindeer, with a backdrop of snow-covered trees. When lit, the…
Coffered ceiling hook I created the snap-on hook design at the request of my wife, who loves Christmas decorations and wanted to decorate the ceiling of the entrance hall. The hook can be easily snapped on and off from the strip of the…
'Tis almost the season for gift cards which means you need to find fun things to put them in! This 3D printed box might be just what you're looking for:) It comes complete with a pixel fidget tree, a spot for a gift card and a cheesy pun…
Hrdina počítačové hry jde do světa, tentokrát jako perníkové vykrajovátko. Výtisk VŽDY používejte pouze po dobu jednoho dne, poté jej vyhoďte. 3D tištěné výrobky mají miniaturní póry, které nejdou vymýt a zbytky jídla v nich zůstávají.…
UPDATE: December 17, 2024 A new model has been added for pressing inner contours (Formula1_inner_only). This allows you to first print the cookie cutter shape (outline) separately and then press the inner contours into the cut-out cookie.…
Add speed and style to your baking with our Formula 1 Logo Cookie Cutter! This cutter, in the shape of the iconic Formula 1 logo, is designed especially for motorsport enthusiasts. It’s perfect for baking Christmas cookies, but also for…
Elegant and reusable gift box. Perfect size for a gift card. Print setting: This model can be printed with 0.4mm, 0.5mm or 0.6mm nozzle size at any layer height. On the picture, the model is printed with a 0.4mm nozzle size at 0.20mm…
Layer hight for the strings work should be 0.3mm. For others, don't care. Feel free to contact me if you need support on printing this model and modify the model. I use PrusaMK4, 0.6mm nozzle. christmas tree-3-0 v0: no holes for emitting…
I created this model from a photo I found online. I imported it as a canvas into fusion and used the spline tool to trace around important lines and then extruded to my desired height. I encourage you to try it yourself. Please be aware…
Decorate your space with this Cozy Gnome Figurine —perfect for festive home decoration. This intricately detailed model captures the charm of holiday cheer, making it an ideal addition to your seasonal decor. Printing Tips: Supports…
(EN) Character from the movie Grinch. Suitable for hanging on the wall. The piece has a small hole in it. Be careful, it is fragile. (CZ) Postava z filmu Grinch. Vhodné k pověšení na zeď. Díl má v sobě malou díru. Pozor křehké.
Included in the files for this Santa Coaster are English, Czech (of course), Spanish, French, German, Italian and Swedish/Norwegian language variants. I've only printed the English versions, but the other language variants were simple…
Scale model stable suitable for a nativity scene with 1:15 scale figurines (e.g. 80-100mm in height when standing). The design includes 33 separate model files, including: Walls (textured) Wooden posts and door (complete with texture)…
4 Models to choose from! Supports come off easy! SPIRAL - SMOOTH - JAGGED - TREE WITH STAR I designed these to be a little loose so you don't hurt yourself trying to get them together. Simply print 2 of any model and screw them into each…
This is the ornament that started it all this year! The first in the Swoop series. There are 2 other ornaments in the Swoop 1 series – a finial and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me…
I recommend printing it with at least 0.2 mm layer height or higher. Happy printing :)
The complete print consumes approximately 20g of filament (in my case PLA). I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports). STAR VARIANTS…
make shadow of snowflakes and bells pattern
Big Gingerbread man with Santa hat and flexible
12/15/24 update-- uploading REV 3 models. faceplates easier to remove tighter fit stem ornament body prints easier stl files now populate in correct orientation. new faceplate designs. new R3 ornament is compatible with all original…
This advent calendar offers an original way to count down the days until Christmas with a touch of style. The model is specifically designed for Tatratea or Krugflasche 0.04 l bottles. Features: The model includes two variants: For…
A conical pass-through vortex fidget toy I printed a while ago brought a Christmas tree to mind. It just needed a topper, and some tweaks to the shape. Feeling inspired, I opened Fusion, and this thing was born. I had initially intended…
Abominable Snow Monster | Bumble | Christmas Lights | Rudolph the Red Nosed Reindeer
I needed a small decorative Christmas present and not finding a suitable one I built it from scratch. The dimensions are 16 mm but I think you can resize it as you like. It is not necessary to use glue to assemble
This is Santipaw, the trusty Christmas capybara. The capybara is a reliable and trusty friend and deliverer of Christmas cheer. Unlike gnomes or elves, he's not prone to tantrums or grumpiness; his steadfast character is ready to bring…
Better stars for less drooping first layers on the snowflakes. Box is scaled to 150%
Herrnhuter inspired Christmas star. Design include stars with a 200mm, 250mm and 300mm diameter. Two star shells is required and should be glued together after eventual adding some LED light to the star tips. The foot can be used if a…
E-Tee-Licht-Kugel 01 und UPDATE 29-12-24 Tee-Licht-Kugel V2 01 ohne Support. für alle denen noch etwas Weihnachtlicher Schmuck fehlt. Passend für E-Teelichter . BITTE NUR E-TEELICHTER VERWENDEN UM FEUER ZU VERMEIDEN! Material könnt Ihr…
Here are the files for my Christmas Tree for 2024, a fun print to add to your decorations. this model has the base model for the tree then optional Snow which can be added and combined in slicer for multi colour options. I hope you enjoy.…
A modified version of the Remix “Stringy Christmas Tree with Realistic Bark” from jawsawn . I reduced the height for a chunkier appearance and added a support ring that the branches don't sag down and you can see the trunk better. I also…
Is it an elf, or just a gremlin disguised as an elf? You decide. This gremlin will look great on your tree. I also can upload a version without the elf hat if you are looking for the less disguised version.
3D printed christmas coin This is the model for a xmas coin i made with autodesk inventor. Prints well on most printers. It's a fast print and if I have the time, i'd like to improve it in the future. If you print this object be aware…
Spread holiday joy with this adorable Santa Claus Kid Figure & Ornament ! 🎄✨ This charming design features a kid dressed as Santa Claus, now available in two versatile versions: Figure Version – Perfect for display as a festive decoration…
Here is the model for Grinch Bear. The Grinch is a reluctant acquaintance of Barry, and he seems to be willing to tolerate you too, do you have space the Grinch? just keep an eye on your Roast Beast. I hope you enjoy, and Merry Christmas…
Color change by layer at 100% scale, 0.1mm layer height: 1 - 7: any base color 8: Yellow (star) 11: Green (cactus) 14: Red/Orange (heart, presents, star, hats) 19: White (dino body, present ribbons) 25: Black (dino outline) 30: Blue/Green…
print both it has 3 coasters ams compatible may need to resize holder
The Santasaurus is inspired by the work of magician and optical illusion inventor, Jerry Andrus. many paper versions of a dragon moving it's head about are available as well. I decided to see if I could 3D print one - here is the result.…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Spread holiday cheer with this adorable 3D printed reindeer design! 🎄 Featuring a joyful reindeer peeking over a customizable nameplate, this model is perfect as a personalized Christmas ornament, gift tag, or decoration. Whether you’re…
We have had a long tradition of making Christmas hearts of glossy paper with trained fingers and a scissor. Here is a 3D printable version. Well a 3D model with only ONE layer. Instructions: There are two set of files, Red and White (you…
This 3D-printed Christmas card features two collapsible Christmas balls that are initially printed flat but can be easily transformed into 3D ornaments. One of the balls incorporates a built-in light to provide a warm, festive glow when…
Santa Hat Ornament, to do the 3 colors just stop at the right layers. Doesn 't need supports to print merry christmas
Articulated ornament with 3 rings around the outside that can spin. Multi-color print, with an Apple logo surround by a wreath. Powered by MakerWorld-Christmas Ornament Maker
Reusable gift package. Easy assembly, you just need to align the numbers on the sides.
This model is a classic Santa, highly detailed and perfect for Christmas decorations! Merry Christmas!
Star - PLA 0.2mm LH minimal support, only to support overhang and bottom points, paint on or set to support critical regions only Tree - PETG translucent green 0.2mm LH vase mode No supports, Vase mode, outer brim only Small LED tealights…
When there is not enough kendo at home, print these and make som stylish kendo bogu gingerbread cookies :D
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
I really liked the original model but I thought it would be even more awesome with a smaller ball inside it. So I made it. Here's a video showing how the inner ball can move freely inside the outer ball: Support is necessary because the…
I printed it on my AD5M in silk sliver PLA and turned out great! I was inspired to make it from the movie “The Polar Express” Sadly, there is no ball inside it, trying to find ways to do it. Printer settings: Print the bell with the hole…
I have printed a small decoration for my Santa's hat ! It's givnig it a look of Capt'ain Jack Sparrow, but i love it ! Do you ? I used the prusament Green Pistachio as the white, red and green really suits together; 2 walls, 0% infill.…
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
I designed a new bulb for the base in https://www.printables.com/model/678099-christmas-tea-light-bulb that is modeled after a C9 outdoor Christmas light. The original has a pointed tip that does not print well in vase mode. As long as…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
![Chrome Dino Festive Christmas Tree [Ornament]](https://media.printables.com/media/prints/1109124/images/8380518_72de2fb6-757f-450c-95f5-0d3052fb158b_847bb7fc-93da-4c38-993b-17c0858eb5a9/pixeltreedino.jpg){kind=tracking}
