48 modeli
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
This adapter system wraps the edges of a PROTOPASTA 203mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
I purchased a bunch of Xiaomi LYWSD03MMC temperature and humidity sensors for use around the house. They are cheap and work very well. I re-flashed mine with some open firmware and have been using them very successfully with Home…
Need 2 self-screws 2.9x13 or two hot-melt nuts M2 and two screws M2, for a better look use the handle as in the photo from here <3
se case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. Impression I recommend printing it vertically in PLA or PETG. Please…
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
I recently picked up the ESP32 based OpenTherm Smart Thermostat kit from DIYLess ( https://diyless.com/product/opentherm-thermostat ) as a cheaper alternative to a brand name smart thermostat. It came with a Xiaomi Mijia Bluetooth…
Xiaomi Mi Temperatur Sensor LYWSD03MMC-z Batterie Mod von CR2032 auf CR123A und Magnet-Halter (Optional) Ich habe den Mi-Sensor von Bluetooth auf Zigbee geflasht um das Teil problemlos in mein Smarthome zu Integrieren. Da nach dem Flashen…
Instead of using screws as a stand I designed a stylish and practical stand. If the rotor diameter is less than Ø180mm you have to shorten the hands. Also look here for a beautiful adapter for the Disc Brake Clock:…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
A small holder / rain shield for the Xiaomi family of temperature and humidity monitors. For outdoor deployments
Here's a little holder for a Xiaomi LYWSD03MMC to fit inside your Filament Dry Box. I use these sensors with ESPHome using the PVVX firmware and Home Assistant to monitor the humidity of my Dry Boxes.…
Minimum-size radiation shield for the Xiaomi LYWSD03MMC temperature and humidity sensor. Two parts snap together.
It has an extra 0.3 mm on the top of the placement to correct the heigh deviation produced by the support contact. I printed it with an 0.2 mm Z distance on the supports. I designed it with F3D and did it to add a temperature and humidity…
Use case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. I added different models in order to fix it or place it in a…
This is a simple wall mount for the Xiaomi Mijia temperature / humidity sensor (LYWSD03MMC). Designed to attach to wall using a Command Poster strip (size small). NB: This is not a remix (designed in full by myself), but more “influenced…
AAA and wall mount for the fantastic LYWSD03MMC
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
easy to print , no supports, printed in black elegoo rapid pla window is in petg clear ironing mode on for clarity.
Found this nice little holder for the nifty Xiaomi temperature sensor / display. And in an attempt to organize my always cluttered desk, I've added a hexagonal fixture to it. Print standing upright, no support needed, but might be nice…
All credit goes to CandianKorean. I just took his design an resized it down for a 230mm x 230mm box. I also added two optional risers to keep it tight height wise. Category: Games
PLA works fine
*********The one in the photo is made specifically for myself, which include some weird size bit such as 1.5 & 5.2. The stl uploaded is suitable for more common size drill bits.*********** Hardware needed: 1: M3*12 2: Nyloc Nuts or double…
Simple and easy holder to clip a Xiaomi LYWSD03MMC into the lid of an IKEA KORKEN glas. It sits in the space in the lid and can freely rotate. I tested it with a 0,5L KORKEN glas. But it should also fit the 1L, 1,8L and 2L KORKEN version.…
This is a simple holder for the LYWSD03MMC MiThermometer, which is often reffered to ATC MiThermometer due to the open source firmware, that is available for it. The greatest feature with this tiny devices is, that you can get an open…
Printing threads on a 3d printer is a sign of true expertise in modeling and tuning in your settings. This is a test model that has 0.03mm tolerances as well as having a 0.2in chamfer on the top of the hole and bottom of the bolt. The…
I printed in PETG with 5 wall loops.. to eliminate the infill on the outer wall My remix resized to 10.7mm Shaft and 103mm Outer diameter to match an existing wheel I recreated the model in Onshape with variables, if you need to redesign…
Servo Adaptor Plate to install the KingMax KM1203MD 10kg Servo's of only 20 grams per piece, to be used for the elevators, rudder and ailerons, for the flaps I chose the KST CM653 40 gram servo, saving in total 235 grams of unnecessary…
Infinitely adjustable Reversible for an even wider range of adjustments Fast print No supports needed Onshape model
Simple adapter for Xiaomi LYWSD03MMC to use with Niko coverplates. Print settings Layers and perimeters Vertical shells > Perimeters: [1] Quality > Detect thin walls [x] OR Advanced > Perimeter generator [Arachne] Infill Advanced >…
(This is my first model so feedback is very much appreciated. Thanks in advance.) Simple support for holding the Xiaomi Mijia Hygrometer on the top of the AMS Lite, very close to the filament pools. This allows us to continue monitor the…
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
This is a Shopvac Wheel Disc for Shopvac Model 5830411. 4-Gallon 5.5HP Corded Wet Dry ShopVac. The wheel discs that came with it had mangled tabs. I reached out to Shopvac support but decided it might be easier for me to just design and…
Holder mount for the XIAOMI BLE sensor display downward onto some wooden surface. It makes sense if you want to get climate-data from a surface, e.g. incase of mould-risc. The recommended mounting screw is a metric selftapping woodscrew…
A compact outdoor enclosure for the popular Xiaomi Mijia Thermometer 2 BLE temperature and humidity sensor. I designed this specifically for Home Assistant/BTHome users who want reliable outdoor readings without exposing the sensor…
I created this shell to enclose the Xiaomi Miijia LYWSD03MMC on my balcony, in a place not directly exposed to sun, rain or moisture. It is not waterproof, of course, but it does the job. The model is made of two pieces clamped together…
These files are from the same parametric source project as my 36mm × 55mm × 159mm drawers , and are meant to fit into the same kind of cabinet. I haven't printed a final version of this size yet but will add pictures here when they get…
The covers were printed without supports out of PETG but Im sure they would be fine with any other filiment. The 63 mm was made to match the spider center with a 53 mm mirror, I have a 70mm secondary mirror so I made one to 70mm The…
I was a big fan of 3D printing in general ever since I saw the first early RepRap era printer review, and last week I finally purchased one! So this is my first 3D model, in which I've put all these years of passive 3D printing…
Use this simple jig to ensure your new Lokbuild print surface is installed perfectly to your Cube3 print plate. You'll need to print 4 of these and a 203mmx203mm Lokbuild print surface. Lokbuild is a MUST have for anyone hoping to print…
Filter component step with colors for use in PCB lib RSLF07 240052B 90.05-0.03M
Use this simple jig to ensure your new Lokbuild print surface is installed perfectly to your Cube3 print plate. You'll need to print 4 of these and a 203mmx203mm Lokbuild print surface. Lokbuild is a MUST have for anyone hoping to print…
Materials https://www.printables.com/model/201564-xiaomi-lywsd03mmc-stevenson-screen Since outside, recommend printing in ASA using a light color such as gray Two medium command strips (outdoor, clear) Can purchase a refill pack that…
Thank you, PlasticPusher, for sharing the original Yard Force Classic 500 6xBlade Adapter and mounting information. Based on the 203 mm no-fins version. WHY THIS REMIX A previously printed adapter failed locally around one blade…
![Wall mount for Xiaomi Mijia temperature / humidity sensor LYWSD03MMC [Light weight]](https://media.printables.com/media/prints/10a9fbc9-8878-4b6c-babb-c2fdd1260dcb/images/9287229_0f07cc27-fc48-4375-a3ae-abfe6a1a4d7a_e87e254d-f6f3-47d4-a9b5-bc0d54600f64/img_20250322_181906.jpg)
![Yard Force Classic 500 - 203mm adapter, 3mm nut-seat floors [EXPERIMENTAL]](https://media.printables.com/media/prints/47b780e6-d2d6-44d0-a3ff-f2a0826b5840/images/14310269_b83651ef-b73b-444d-a9ee-1bf06c695ca0_b85158a2-1220-4cdc-bb99-1bca0c3491cf/yardforce_floor3mm_comparison.png)