133 modeli
OpenSCAD model to simply create a cap with a few measurements. 2025-12-24 update: I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle. Of course you can buy…
This is a 10mL remix of tacokittah's 3mL labeler. I use this to apply larger labels (50x30) to my 10mL vials with a bit more ease and less frustration. tacokittah suggested that you put double-sided tape on the botom when you're applying…
This allows for the rugged box to hold 3mL peptide vials or 10mL (22mm) vials.
Build instructions as per the original Model. 2 x M3 x 20 mm screws are required.
A paint rack for Tamiya paint pots in 36mm diameter (10ml bottles) DXF files for laser cutting. ; Assembled size (H;W;D) - 328mm; 423mm; 80mm. Print Settings Rafts: No Supports: No Category: Tool Holders & Boxes
A compact and minimalist 10ml container designed primarily for creams, balms, and other cosmetic products. The screw lid ensures secure closing, while the knurled edge makes it easy to open even with slippery hands. Perfect for travel,…
Press fit two 5mm x 5mm magnets in the hole in the center. Mind polarity. If your printer's calibration is a bit off, you can glue those in place if the hole is too big, or drill them out with a 5mm drill if the hole is too small. I do…
A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 15 10ml…
BOM: Printed with ROSA3D Starter PLA Red Whether you need to measure out coffee, protein powder, laundry detergent, or pet food, this set of measuring scoops is the perfect household utility print. The set includes three common and highly…
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
One of my first self made models. I was in need of a solid stand for my display case and this is the result of it. Print instructions: Layer height: 0.24mm-0.28mm Infill: 12-15% gyroid (rectangular/grid should work fine too)…
Stackable paint racks for Tamiya 10ml jars. The racks stack by sitting on the lids of the ones below. Solid sidewall allows labels to be affixed. Make sure to print with the rack in a vertical orientation. 23ml version available here -…
EN: The model is beautiful, but unfortunately designed in such a way that it cannot be printed properly in any position without supports. This is a disadvantage because the model itself is so tiny and breaks easily when the supports are…
Holder/Tray for Tamiya paint bottles (small). Large & small bottle on the side of the photo for reference. Category: Organization
Screw on vial storage container
3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…
I use heavily in my workshop Modular workshop system from Hobbyzone ( http://www.hobbyzone.pl/en/wsm/Hobby+Zone+modular+workshop+pt3this/ ). I love their product. Smart, practical, easy to build. Holder I am presenting here is inspired by…
10ml Bottle Dust Cap (TPU) Keep your bottle tops clean, sterile, and entirely free from dust and debris! This functional dust cap is specifically designed for most 10ml bottles , though it will likely fit most 5ml bottles as well, given…
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. There is a holder for 20 ml, 10 ml, 5 ml and 3 ml syringes.
I wanted something to transport my in use 10ml insulin vials, I use FAISP but it shoud work with most other 10ml vials dimension 52mm(H)x23mm(D). I looked at others people had designed but wanted something that could provide a little more…
The 10ml bottle holder will fit within the Gridfinity grid. One has a 3mm base that fits with some of the other things I have made. The other has a thin base to save on material when printing
Modified version of a Insulin Transport Pot by PHM88, remixed for use with common estradiol vials. It has been tested with various 10 milliliter multi-dose injectable vials. This container for your estrogen vial ensures that your vial…
Insert for my perfect peptide case. It holds 26 3ml and 5 10ml Print with 2 layer walls, 15% infill, preferably gyroid.
single paint pot holder for Tamiya 10ml paints
Parametric 10 ml vape bottle holder My 10 ml bottle are filling up my drawer (thanks EU and your “ecology”). I designed this easy parametric bottle holder in F360, should fit 21 mm bottles. Open .f3d model. Go to Modify >> Change…
Gridfinity 2x2 for 23mm Liquid Bottles e.g. Vape Liquids 10ml
After finding the Paintholder for the 23ml colors from Tamiya, I also needed one for the 10ml colors and decided to learn how to create a CAD drawing and voilà, this drawing was born. I designed this file so that it saves material and…
This remix is based on the original model of JoerT. The original design used magnets of 5x5 which I didn't have available. So I made a modified design that uses 4 magnets of 8x2mm (two in each part) I printed it for someone else (not…
BOM: Printed with ROSA3D High Speed PLA Gray This is a straightforward, functional measuring spoon designed to hold approximately 10ml of liquid or dry ingredients. It features a clean design with large, easy-to-read "10 ml" lettering…
My flux was delivered in a "normal" 10ml syringe without an additional plunger. I cut off the original piston and altered the piston of “Flux and Sloder Paste dispenser” by @Elektroarzt
Print short handle version right side up, no supports. print long handle version upside down, supports inside the cup.
Designed for my own specific need but sharing anyways. This holder holds 4 bottles of 10ml vape liquid together and is made so they fit nicely upside down aswell so you can get the last bits out of the bottle without having to balance…
Modular peptide vial storage system designed for serious users. Includes two single-row trays — "The Stack" and "The Fountain of Youth" — each holding 10mL vials securely upright. Use them independently or together as a stackable system…
Used generic PETG filament. A nice snug fit. Setting can be adjusted for a more aesthetic look.
This is a screw-top case for 10ml injection vials to protect the vials against temperature and shocks/drops, aswell as keeping them clean and safe. Recommended to print in PLA+, PETG or similiar.
Originally I just wanted to print kahnindustries' tray but there are a lot of prints out there which do not respect specifics of additional manufacturing like that one, which makes me unhappy, so I decided to design my own. That being…
All settings can be standard - except for number of perimeters, which I set to 4 to increase the strength. You do still need to refrigerate your insulin, this case is purely to reduce the chances of breaking your insulin vials when…
Holds a 410ml SuperLube Silicon Can on a HSW
simple 10ml tamiya paint jar opener because they seem to glue them selves closed, id recommend 50% infill or greater
This is a remix of curmudgeon’s Peptide vial Organizer . The original holds three vial sizes (30ml bacteriostatic water, 5ml, and 3ml). I only needed the two smaller sizes, so I rebuilt the tray as a clean two-row version with a ~40%…
10ml Pipette Tip Storage and Dispenser is designed with convenience and professionalism in mind. Featuring a rotating knob on the right side, effortlessly retrieve your pipette tips with a simple twist. No more fumbling or searching…
Changed the back to be multiboard snap
A 3x 10ml Liquid Bottle Holder 1x2x3U for Gridfinity
My first project made in Fusion 360: 10 ml 7x2 E-Liquid / Aroma Bottle Stand Print with 100% Infill to get perfect circles (0.4 nozzle), takes only about 68 minutes for 174 x 49 x 5 mm. As I am new to 3D printing and modeling - this is…
Organizér napríklad do zásuvky stola, alebo voľne stojací. Vhodný pre 10ml farby Tamiya, Gunze, washe od AoM, … Nutné vytlačiť 2x. Prikladám aj súbor f3d pre úpravu, pripadne remix.
Vertical storage for 10ml MG Chemicals flux tube, tip, and syringe (8341)
Modular Syringe Holder for 20ml, 10ml, and 5ml Syringes This modular syringe holder is designed to accommodate 20ml, 10ml, and 5ml syringes, with each module being able to connect to another, either with or without magnets. Each module…
Shelves that attach to an Ikea Skadis pegboard and can hold 3 or 5 Tamiya 10ML or similar sized paint bottles. Printed in PLA with supports enabled for the peg mount hooks.
Pick the variant of your choice, 30 or 15, then add 2 ink holder hooks which slot into the back of the model with the hook pointed down. I've also exported my fusion file as a .step which I hope is helpful.
This was a gift I designed for my Mom, Its specifically made for 10mL / .33 Fl oz Skylar Ballpoint Perfumes. Should work with others too. May add screw holes on the back later… Printed at .2mm layer height and 3 percent infill (Infill is…
I like storing stuff like my Scale Modelling related Tools and Tamiya 10ml Paints in movable Swissair Trolleys but with the number of Paints I have at my disposal I need to stack them in the Drawers which makes extracting them kinda a…
Added wings to this monoject cap so it can't roll away. For 10mL MonoJect syringes. I use these for synthetic grease and glue and this cap does well to seal off the end.
Stand for Tamiya 10ml paints. The rear shafts are deep and will allow you to store a brush. Other dimensions are maintained. Models from user Squirrelbrain just need to be reduced to 87% to fit 10ml bottles.…
An organizer for Tamiya 10ml acrylic paint jars and some other model painting tools. It's inspired by Tray For Tamiya Paints (23ml) With Brush Holders .
I have designed this stand for the 10ml Loctite (406) can´s in my fridge. The file has 4 holes for M10 nuts in it, you can add a stop code and put them in. (in the *.gcode allready included). The nut´s sholud give the stande a higher…
Please note! The original caps shared by Radar Labs are much better than this. I'm leaving this up for reference only. I really like the Loob Toob by Radar Labs as a way to carry grease in my travel toolbox, it's light and simple, made of…
This is an adapter for Tamiya 10ml paint bottles. It will allow the use of regular Vortex Mixers.
A fully parametric organizer for 10ml food flavouring bottles. Specifically designed for Flavour Art bottles (22mm d), which are slightly wider than standard 10ml bottles (20mm d). STL model is for 5x2 grid, parametric F3D file is…
This funnel let's the user easily combine the last few drips left in a 10ml Flavourtec bottle into another bottle. A few of these bottles with just a drop left can actually be quite a lot. No supports necessary The funnel in my picture…
I felt that the original Le Labo perfume travel case was a bit heavy and you couldn't see which perfume was in. So I made my own travel case that is much lighter, you can see the perfume you have and it doesn't cost 100$. The case is a…
This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.
Created simple tabletop six bottle vape juice organizer. Bottles with 22mm diameter will fit. You can change height in slicer if necessary Added vape_bottle_holder_v2.stl for 24 bottles.
This is just a simple tray that can be used to store 9 10ML bottles. Trays connect together on Left and Right Side. I have included the STEP file aswell so that you can make your own changes. Design is parametric. Bottle tolerances are…
Washing machine detergent dispenser. As a general rule, for a 4-5 kg washing machine, 55 ml of liquid detergent is fine; this rises to 85 for a 6-8 kg load; and to 110 ml for a washing machine of more than 9 kg. Full is 110 ml.
Tutorial: https://www.youtube.com/shorts/Xo5y2RM67mk Glass bottles: https://amzn.to/41P7YkG Useful storage rack for keeping your long term cultures saved.
Bierkisten-Flüssigkeitshalter für 10ml-Flaschen
Jsem modelář a dlouhou dobu jsem neměl nic na barvičky od tamiy a tak jsem si vyrobil držák a je super. Tomu kdo je také modelář se jistě může hodit... Print instructions výplň 15% material PLA
Curraprox BE YOU 10ml toothpaste refilling tool. Designed to refill with Meridol 20ml or 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm…
Just needed it to be a little wider :)
This is a custom piece, designed to meet the request of holding 2x Aspire AVP Cube and 2x Vaporesso XROS Mini's along with 4 10ml bottles. This is simply a ‘thing’ to keep these objects tidy on the users desk. I added some 3m non slip…
Suporte para 6 frascos de essências 10 ml 15% infill
UPDATE 27 Jan 2026: Added a scaled up 23ml variant. A simple 4x2 paint organiser. Use it as an insert for drawers, boxes etc or simply lay it on your workbench/table. Fits Tamiya, Mr Hobby, Mr Color paints well. Test printed in Black PLA…
This is a storage solution I made for my Tamiya paint bottles. It's based on Whitys Parametric Rugged Box. This box is for the normal typer Tamiya bottles (10ml). I made versions for other types of paint as well, see links: Rugged box for…
This is a cylinder I created to measure out 10ml and 25ml of pool water for testing various pool chemical levels. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2 Infill: any Notes: I printed this…
This holds eight 10ml sample vials. Perfect fit. I did 15% Infill.
I like 10ml sample perfume bottles, which can be bought from perfume collectors or are sometimes included in perfume gift sets. Since I wanted to carry them with me safely, I designed this protective case. These 10ml samples usually have…
Simple holder for storing a 10mL syringe on a 250mL bottle of Seachem Prime. Should work with other bottles 50mm in diameter and syringe / tool that is around 6.4mm in diameter. The part is thin, so a brim may be needed.
Bepanthen Eye 10ml container that protects the bottle from the light. Inner diameter is 22mm
Convenient holder for syringes with flux 10ml mechanic ersa and others Update add version 2 by Luer Lock flux syringes 10ml
Simple insert to keep small bottles upright in storage. Fits standard 10ml bottles such as these: https://www.amazon.co.uk/gp/product/B0B5GWQFCM Designed for use with one of these tins: https://www.amazon.co.uk/gp/product/B0BBZQCRMQ
Designed to hold these glass bottles at the perfect angle to make an agar slant. Simply fill with 5ml of agar, loosen lids, place a few inside a jar and pressure cook for 10 minutes. Once pressure cooked let cool down to 120-130f then…
After making the Liquitex 22ml holder , made one to fit the Reeves 10ml tubes. No glue needed, it fits snug inside the bin. Holds the tubes very well. I split in half with round plugs to fit on my MK4S. Organic supports for the plugs,…
Gridfinity Tamiya/Mr Hobby 10ml paint bottle holder - light version to save that 1 minute of printing
You will need a long M4 bolt and one 10 AWG (6.0 mm²) wire ferrule. For the version with a hook, you can either print it as a single piece or print the two-part version and glue the parts together afterward.
This is a simple and practical desktop holder designed to keep your 10ml e-liquid bottles neatly organized and easily accessible. Holds up to 8 bottles of standard 10ml size (commonly used for e-liquids and vape juices). Designed to sit…
Keep your favorite scents safe on the go! This compact, rugged travel case securely holds up to four standard 10ml perfume rollerballs or spray vials. Designed with a print-in-place hinge and a satisfying, secure snap-closure, it ensures…
-PETG -No supporrts -%80 infill 2022, MN
remix für 10ml Flaschen mit ~25mm Durchmesser Category: 3D Printing
Perfect for holding and storing flavorings(or any 10 ml bottle)
This is a modular storage solution to hold 10ml paint containers (ex. Tamiya and AK acrylics). The design is completely configurable to your collection. You can do just 2 layers or all the way up to 100 (though it probably isn't very…
Multibin Top for 3 pcs Loctite 242, 243. I have only chinese fake LOCTTLF versions and I hope that size fits for original too. 29 mm version is easy to remove. 28 mm is tight to bottle.
This holder is designed for the IKEA SKÅDIS pegboard system and securely holds four 10 ml squeeze needle bottles with a diameter of 21 mm . These bottles are commonly used for model glue, lubricating oil, or precision liquids , making…
Just testi if your favourite brand of vape fluid bottle fits… It's designed for a popular 10ml bottle .
gunny juice is a a product used in the knife sharpening world
If you've been told to refill your pump revivors then having somewhere to hold them in the fridge is kinda handy. I've designed this to hold a 10ml vial and a pump cartridge/revivor, it may also fit a pen cartridge but I don't have one to…
1x1 gridfinity for 10ml syringe of flux along with plunger and a small plastic nozzle
