Liczymy pasujące modele…
I had some issues with the original version's thin walls on my Ender 3 v2. That's why I reworked the grille and the bottle holder. The grid now has a border outside and inside and the grid has a larger tolerance to the base. I designed a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
Wall mount pieces for Lego set 92176 Saturn V Rocket. 2-piece set to vertically mount Lego Saturn V rocket. Print WallBase piece with the wall facing side on the bed (No supports required) Print TopClamp piece flat with long arms parallel…
This model is compatible with the lego system.
This model is compatible with the lego system.
22.03.2023 Update: Removed the burr/radius on top of the studs for more clamping force Uploaded a Solid Model Subtracted 0.2mm from the “roof” to encounter the sagging from bridging --------- Use as key chain and add your favorite 2x2…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
Penta-Pentomino Tray-packing puzzle by Stewart Coffin (STC #176-A) Fit all five pieces into the square opening. Penta-Pentomino is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't... if…
Simply mount the guide/jig on your plunge router and mark out the center on the material with a pen. Then drill a small hole in the center. Stick a pin/cylider/spike etc. in the desired diameter on the jig and place the pin in the drilled…
This model is based on another model from Thingiverse, but doesn't seem to be available anymore. This one tries to fix all issues with that other model and make it work better for FDM printing. I don't claim any rights to this model.…
19 inch rack front panel for two 176mm wide switches
This model is compatible with the lego system.
This filament dryer is designed as an efficient, reliable, easy-to-build, low-cost, and environmentally friendly solution for drying common 3D printing filaments such as TPU, PLA, PETG, ABS, Nylon ASA, PC, etc. Provides differentiated…
1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
Securely place your phone in your Mercedes A180, A200 W176 middle console. Compatible with iPhone & Android. Simple design, easy install No support needed
Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill
2U 19 inch rack front panel mount for two 176mm wide switches These panel mounts require the DAP 2U MP-1 bracket. I have tested with cheap unmanaged switches: 8x 2.5Gb ports + 1x 10Gb SFP+ 4x 2.5Gb ports + 2x 10Gb SFP+ Print the front…
I tweaked gdrag's awesome stackable trays to make slimmer versions for sorting jigsaw puzzle pieces and keep them nice and organized. Printed with a Bambu X1C using PLA Matte takes 2.5hrs using 112g.
Compatible with Lego.
Compatible with Lego
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
GX617-Style Lens Cage V2 for Infidex 176 V A protective lens cage inspired by the iconic Fujifilm GX617 Professional panoramic camera, designed for the Infidex 176 V 3D-printed panoramic 35mm camera by Denis Aminev. The problem this…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Getting ready for a trip to the beach? Pack this along…
For assembly, you can use double-sided tape or use the full oneblade pro shaver holder https://www.printables.com/model/737724-oneblade-pro-360-face-body-wall-mount
Bought an old Olympus Mju II with shredded gears for the film take up spool. Reverse engineered a new helix gear. Printed with 0.1mm layer height to get as much detail as possible. The camera now works. Maybe not perfect, but functional.…
3D printable display model inspired by the AGM-176 Griffin , optimized for reliable FDM printing. This is not a 1:1 replica . Geometry was intentionally adjusted to improve printability, strength, and ease of assembly while preserving the…
More Metroid bosses! This one is the Ferrocrusher from... uh, Im not allowed to say the name of the game. Original model downloaded from The Models Resource, the scale of this little fellow was based on the size of the pilot and optimized…
Printed on its back with no supports, product clicks in there with no glue etc. Used infill modifiers to have more infill on leg connectors.
Mower deck roller for fabricated deck Image is the roller it replaces.
I’ve created a monster… Had a Mamiya Press lens not being used and whilst building an INFIDEX 176V decided that the two should become friends. This is a challenging print if you don’t have multi-material capabilities with your printer. I…
I was missing one of the two tank cushions, printed in TPU. It is a replacement for 17611-437-000. It should fit a lot of old Honda's including: nx250 atc250 nsr50 xls125 + more.
This set of electrical outlet insets works great for Ikea Fryele flashlight type E1762 but also any other appliances with simple flat plug which carries a lot of weight. Many appliances and power supplies are produced cheap and their…
ARTE&DISIGN GT176 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is a stand with a diffusor for Neewer 176 (RGB) Lamp. It's a good and cheap light to take pictures of your 3D-printed projects. You need only 20mm bars (1.6mm thickness). Everything else is 3D-printed. This stand with diffusor can be…
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
This model is compatible with the lego system.
LMUW8 Fetthilfe Motorex 176 GP 250g Tube, erleichtert einem das fetten der Gleitlager. Kann normal auf die Tube aufgeschraubt werden. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2mm…
ORGANIZZATORE GT176 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
MUTTER TILL CALIX INTAGSKABEL / MUTTER FOR CALIX INLET CABLE MK 0.5 (0.5m), Art.nr: 1762505 MK 0.8 (0.8m), Art.nr: 1762508 MK 1.0 (1.0m), Art.nr: 1762510 MK 1.2 (1.2m), Art.nr: 1762512 MK 1.5 (1.5m), Art.nr: 1762515 MK 2.0 (2.0m), Art.nr:…
Slightly modified version, fan is noticeably quieter but slightly wobblier. But luckily it's not wobbly enough to cause the fan to make any additional noise or vibrate. My reccomended Print settings: Use a dedicated support material if…
This model is compatible with the lego system.
Heute präsentiere ich hier mein erstes Model. Es handelt sich um ein im Maß einstellbarer Adapter für die Laderaumhalterung des Opel Insignia. Gedruckt ist das Ganze aus rTitan, wobei gutes ABS / ASA dafür auch reichen sollte. Bei einer…
When reassembling my Whirlpool Atlantis dryer, I discovered that the hinge covers were cracked. I looked at buying new ones, but apparently Whirlpool is very proud of these things, and I didn't want to spend that kind of money or wait.…
BMW do not have a part number and do not seem to sell the clip without the seal. This is almost a 1:1 copy of the original clip which holds the sides of the rear roof seal to the side trims. Print on the side for layer strenght and flex.…
This is a simple drawer that keeps all your stuff organized. Always in perfect reach. It's size is 249 x 176 x 60mm 💬 If this project was helpful, leave feedback – it's free for you, but it's a huge help for me as I create and share new…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Snap on cover for the 1761 orig. 6 and 10-round magazines. Tested in PLA and PETG.
Dieser Adapter dient dazu, um die Heckleuchte der MB W176 (A-Klasse) zum Leuchtenwechsel einfacher öffnen zu können. Benötigtes Material: 3D Druckteil - Filament: PETG Einschmelzmutter M5 Innensechskantschraube M5x6mm Unterlegscheibe…
Seat bushing replacement for Honda Part # 17611-HA5-000. Save yourself $5 and print it for under 20¢ in material. Personally used on a 400EX but can work for all others with same part number (300EX, 250R, 700XX, etc). I've been replacing…
I've found this Tapo C110 Clip but it doesn't fit my pipe diameter. So i've modded it so that it fits a 25mm pipe, works like a charm! Credits goes to BlushTTV and his original design:…
IKEA Floor Lamps 70145132 60416176 Image to Lithophane http://3dp.rocks/lithophane/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Category: Other
It's just a rectangular prism with a hole chopped in it to fit a HON 176E cabinet lock, to clamp in a vise. Common wafer lock on HON file cabinets.
I made a pretty simple shell for a RusEFI 64-pin 176122 connector breakout (v0.3) . I'm using this with a Toyota Camry, but I believe this may also be compatible with the Miata and Hondas. This really is just to keep it from shorting out…
BMW r1200gs Covering Cap Left (part number 61317670033). This is the copy of the original part. The attached file is in STEP format, so you can create a new model based on this one. For example, I need to mount an extra button, so I will…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego 2x4…
Use a filament that will be safe around engine bay temps. I used CF Nylon 12. Seems to be holding up well. Use Tpu for the gasket. 100% infill for both parts.
I updated the top to better fit with other lego blocks
Spare part for Perrot sprinkler, model Triton-L 11928998 Without screw-on hook
Customized version of https://www.thingiverse.com/thing:3232719 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3232719 Instructions Using the following options: cableLength = 156 cablesPerGroup = 10…
Print this x2 with supports and add it to thing:3421762. Designed to match the curvature and angles of the nuts using fusion360. will allow supporting of larger diameter spools. I specifically printed this spool holder as it is the most…
Kemo M176 Marten Repeller Mount for Škoda Karoq (Battery Bracket Mount) A custom-designed 3D printable bracket for mounting the Kemo M176 acoustic marten repeller in the engine bay of a Škoda Karoq. It attaches directly to the factory car…
Dvířka na skříňku s pojistkami 130x176mm
Perfluorooctanesulfonic acid (C8HF17O3S, CAS 1763-23-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Instead of colour coding, every sphere carries its engraved element symbol. An acyclic molecule to…
Końcówka obcasa FLEK
3 different brackets. The FirstSecondStage bracket printed 4 times to hold the first two stages of the Saturn V. It is sufficient to print the ThirdStage bracket once to hold the third stage. The openings of these brackets are not…
⚠ Note: Work in Progress / Untested Fit I designed this adapter using digital caliper measurements for my own shop setup, as I do not own a 3D printer and am currently waiting on a neighbor to print my test piece. If you print this before…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
3D printable display model inspired by the AGM-176 Griffin , optimized for reliable FDM printing. This is not a 1:1 replica . Geometry was intentionally adjusted to improve printability, strength, and ease of assembly while preserving the…
Spare part for Perrot sprinkler, model Triton-L 11928998 Without screw-on hook
Nursery Rhyme Art - Hey Diddle Diddle - 1765 3D printable model.
![#0176 Travel Size Tic Tac Toe [Beach Edition]](https://media.printables.com/media/prints/962705/images/7358103_57097773-6e80-47fa-96f5-3facb3097d88_d663a7fe-5628-402e-897b-a15b452a82b3/20240803_154140.jpg)
