145 modeli
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
This is a mounting bracket that will attach your Gardena Rain Sensor Electronic (model 1189-20) to a fence or utility pole. I designed this to be easily printed without supports. There are some drainage features to prevent water from…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
This model is compatible with the lego system.
This model is compatible with the lego system.
18942 LEGO technic gear rack 14 x 2 with axle and pin holes
Petřín Lookout Tower, one of the most prominent landmarks of Prague, was built as part of the Jubilee Exhibition in 1891 as a loose copy inspired by the Eiffel Tower (at a ratio of 1:5). It is 63.5 metres high, and 299 steps lead to its…
This model is compatible with the lego system.
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…
This model is compatible with the lego system.
This model is compatible with the lego system.
HueForge - Emblem des Fußballclubs VfB Stuttgart 1893 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White…
This model is compatible with the lego system.
Based on this design from reddit! I used a piece of 110mmx40mm sandpaper and a couple of m3 screws. Does it work? Kind of… Is it cool? I think so.
A replacement battery cover for Denon RC-1192 remote. Printed in PLA, but I think that PETg or ABS will be good too. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Any PLA
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Step back in time with this meticulously crafted chess set, inspired by designs from the Russian Empire between the late 18th and early 19th centuries. Perfectly fitting a 45mm field size, these pieces echo the elegance of the past with a…
Fiat 3,5 HP year 1899 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a 1/25 scale model of No.100 steam tram at Museum of Transport and Technology (MOTAT) in Auckland, NZ. After uploading the No.21 tram trailer files a few months ago, I have been asked a few times to also make a model of the steam…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
While you can cheaply order more shells from Ali Express these can just be self printed. They miss the rubber at the bottom and are a little shorter but i didnt see any worse performance. Them being slightly shorter than the original…
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
This model is compatible with the lego system.
This model is compatible with the lego system.
LEGO Mercedes D W189 Cabrio
This model is compatible with the lego system.
This model is compatible with the lego system.
maximera nahradny drziak, ktory drzi vrchy hrncov v kuchynskej linke od ikei supporty su uz spravene, treba odrezat potom
I created this set of models to replace the stock vacuum molded tray that comes with the Deluxe Edition of Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. It is comprised of a 'stack' of three parts (Coin Tray, Shim,…
This is a set of removable components to form an insert for World's Fair 1893 . It consists of: A tray for coins/medals A tray for the cards (sleeved or unsleeved) and small pieces (ferris wheel car and round marker) A tray for the…
Circus of the Past - Ringling Bros. - Mamie The Giraffe Wagon - 1893 3D printable model.
Designed this to hold my Bondhus hex drive set ( Amazon ). Will probably work with other sets, but have not tried them. Print the Hex Drive Storage file and Mount. The mount uses m3 inserts. Connect the two parts with 3 m3 x 10mm screws.…
Fits for Gardena garden shower type 18911-20 and 18910-20 (Front of showerhead ca. Ø58; neck ca. Ø35,5mm) Possible materials: all materials possible, Asa or Extrudr Greentec because its UV-Stable Reccomendet Nozzle-Ø: 0,4 Printable on…
This is a replacement stand for my Fluke 187/189 multimeters. They used to be sold on ebay, but no longer, so I created my own. I recommend PETG, as it will be flexible and robust for normal wear and tear. I used Overture PETG 1.75…
This model is compatible with the lego system.
Daisy Model 1894 Plunger Spring Removal Fork. May also Fit Models 95, 99, 499, and Red Ryder.
Split into two pieces for easier printing and replacement if one of the holders breaks. All you will need is screws and M-LOK nuts, but these are widely available. If you want you can glue both halves together, but its not necessary as…
I merged my Scopemeter connector with an IR189(USB) connector to use these for connecting to the device. Now the much cheaper IR189(USB) cable can be used instead of the very expensive OC4USB cable. Electrically both cables are the same…
This model is compatible with the lego system.
This insert will fit: the base game (English/French version) If anyone has any requests or ideas on how to improve it, please let me know. If anyone feels like supporting me so I can get more pla and do more inserts: Donate (paypal.com)…
This base accepts a 1/2 inch Loc-Line Fixed Mount (51895 / 59896) , which is secured with a 1/4"-20 screw that passes through the mount. Anti-twist fins engage with the bottom of the fixed mount to prevent it from spinning on the printed…
I have a house full of cabinet drawers where the rear brackets started breaking. So I drew this 3D model that was inspired from the original bracket that broke. The ideal was to be a drop in replacement that is perhaps a little stronger…
An assortment of connectors designed to fit the Molex 0.093" 1190 and 1189 series. Data sheets for each are provided by Molex here: 1189 (Female): https://www.molex.com/pdm_docs/sd/002092101_sd.pdf 1190 (Male):…
Lego Man Toilet Paper Holder - TSG 1899 Hoffenheim
Simple replacement ("upgrade") for the Ferris Wheel token in World's Fair 1893 . I've tried to copy the style you can see in the pictures in the Wikipedia entry for the original Ferris Wheel. Print instructions Resolution: 0.15mm Infill:…
Baseplate which holds up to 4 SPF5189Z Amps or Filters The outer holes fit the holes of chinese 8W WIFI amp. I use it to amplify a Hack RF One signal to drive a QO100 station.
Circus of the Past - Oddities - PT Barnum's Armless Wonder (Charles B. Tripp) & Legless Acrobat (Eli Bowen) - 1890's 3D printable model.
Note: This module is NOT for sale. I don't allow you to print this and sale it. This is free and you should keep it this way . I made it free because I wasn't able to find it online. I found one but it was badly made so I decided to…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Blue At layer #9 (0.8mm) swap to White for…
Just a rough couple of 3d models.
I converted the CR Flamengo 1895 coat of arms (escudo) image into an svg format, then exported it to Fusion 360. It measures 180 x 152 x 6 mm Add gcode to change filament at the following layers: Start with black color Change to red color…
After I stumbled across the original patent for the golf tee I just had to try it out. The design is simple and prints easily with no support. The design does work as intended but if you are looking for something more modern and…
Once I saw an old ad for something called the Ball Puzzle. I was curious how that worked but couldn't find any actual examples of it (Let me know if you are aware of any!). The mystery was recently solved. I happend to stumble across the…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
[Zink und Posaune : Studien zu Überlieferung, Instrumentenbau und Repertoire page 153 Fig. 6: Zeichnung des Original-Mundstücks von Lübeck St. Annen-Museum 1893.59 im Maßstab 1:1. (Zeichnung: Graham Nicholson) Fig. 6: Drawing of the…
A holder for the Bondhus T-handles sets where the tool can be retrieved from the top or front, allowing room for other tools around the holder. The holder can be assembled by through a sliding mechanism, it also features a French cleat on…
Miss Minutes from 1893, Remixed to go with my other “Loki" model prints.
Made it fit the battery tester BT-189. Designed in Solidworks. Has some minor chamfers for easier placing of the tester PLA works fine. Gridfinity is an invention of Zack Freedman .
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
it looks like it says 681 but its upside down
For knocking Jenga pieces out of the tower..... or flattening flys. Will it print? Probably. Will it work? Maybe. I really don't have time to print everything I design. Loosely based on the 1894 Bergmann number 1 automatic pistol. Is it a…
lego 6990 73825 28974 4070 18986 87087 47905 26604 4733 3386 32952
1891 NAGANT PISTOL LIGHTER SLEEVE FOR BIC LIGHTERS
lego 3867 3811 2628 2629 15624 18922 71772 69958
This beer mat can be printed as a whole using an MMU or similar or print the parts individually and glue them together afterwards. (A well adjusted printer is necessary as there are no tolerances between the parts) I also have coasters…
Could not find what i needed so I created my own. It's a 1x3 gridfinity storage for a BT189 Battery Testing device. I made this using the gridfinity tool to be found at https://gridfinity.perplexinglabs.com and then created the space for…
I always liked string climbing toys and earliest version that I can find that was mass produced was by the Lehmann toy company back in 1895. It was called TOM the Climbing Monkey. This toy has been copied by every major maker of tin and…
My insert for the board game Bruxelles 1897 . Designed to fit sleeved cards. I've tested it with Gamegenic Standard sleeves, but there should be some leeway for even slightly taller sleeves. Version differences, which variant to pick?…
This model is a direct swap replacement for a vacuum molded tray from Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. The stock tray is excellent and fit for purpose in storage. I prefer this on the table as it is…
Remix of Fluke 187/189 Accessory Mount by MozamPete. I wanted the bottom to be flat so I didn't have to worry about printing supports because I'm not very experienced with using TPU, and I didn't need to clip in a magnet or anything. I…
My family has a Lasko S18924 pedestal fan that we got from Walmart ages ago. A constant lamentation each time one of us has to move the fan somewhere is that it doesn't have an easy to way to carry it! Enter this carry handle, which…
Clock for Miss Minutes 1893
I Printed it without enclosure with Prusa MK4S Material: Fiberlogy Nylon PA12 Layer height: 0.2mm Perimeters: 8 Infill:100% Supports: Yes Draft shield: Enabled Brim width: 10mm Satin sheet Heatbed temp 110c Nozzle temp 265c Printing…
96mm center to center toe link, modeled after Traxxas 9189. You will need "hollow balls" and press them in. I reused my
YOU NEED THE NEW BODY FOR THIS TO WORK!!! remodeled the guide part to make it more sturdy, angle locked and with a clamp to hold down the knife. The spacer part can be use to raise the overall guide. good for clamping down thicker knifes,…
This is just a replacement for the original Fluke adapter. We often lose them at my work so I just modeled the replacement. It fits the Fluke IR189USB IR serial interface and works with 187, 189, and whatever other Fluke multimeters this…
That clip? that keeps cords neatly coiled. Don't know what exactly it's called. No support needed.
Jedná se o spojku mezi hřídelí motoru a nádstavcem s noži. Ruční šlehač BRAVO. Materíál PETG. Tryska 0,25. Výpln 100.
Adapter to mount a Magnetospeed on a Marlin 1895 SBL Lever Action Rifle. No additional screws needed. Just use the ones that are delivered with your Magnetospeed V3. Printed with my BambuLab A1 PETG 0.4 Nozzle
Basándome en el circuito propuesto por Mark ( http://kimboricha.blogspot.com.ar/2013/12/build-usb-to-fluke-189-irinfrared.html , pero el blog ya no existe), y reemplazando el conversor USB-Serial por uno comprado como el de la foto,…
nachdem das original Teil gebrochen ist, habe ich es anhand des original ersatzteils nachgezeichnet.. nicht 100% aber passt.
![#0189 [UPDATED] Fanout Playing Cards Case, now V2!](https://media.printables.com/media/prints/1090799/images/8248226_31e1db75-300b-4dfb-8308-7f723ad0b955_671b0708-4fe4-4b42-958d-5f25b65b4dea/rl-20241128-007.jpg)
