Wyniki wyszukiwania: 1997

Sortowanie

108 modeli

P
PrintablesWillis Works

1997-2001 Jeep Cherokee Console Latch

I recommend printing at the odd angle shown in the attached gcode to manage stresses in the part and reduce overhang issues but YMMV

Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu

Pobrania
253
Polubienia
39
Ocena
5
P
PrintablesL7899

Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem

Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…

Pobrania
117
Polubienia
23
Ocena
0
P
PrintablesL7899

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesModel Magic

The Fifth Element - Bruce with Taxi - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
358
Polubienia
48
Ocena
0
P
PrintablesModel Magic

Mr. Bean - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
322
Polubienia
44
Ocena
0
P
PrintablesOrion Crawford

Corvette C5 1997-2004 Kit Card

A kit card of one of my favotite models of Corvette the C5 1997-2004 model. It needs some glue on the axles but should have spinnable wheels. I also sell these over on Etsy: https://glacierfrost.etsy.com

Pobrania
321
Polubienia
36
Ocena
0
P
PrintablesModel Magic

Sci Fi Movies - The 5th Element - Leeloo - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
320
Polubienia
39
Ocena
0
P
PrintablesSamSkwanch

Switch Panel for Jeep Cherokee XJ 1997-2001

Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…

Pobrania
303
Polubienia
59
Ocena
4
P
PrintablesModel Magic

Men in Black - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
300
Polubienia
42
Ocena
0
P
PrintablesModel Magic

Buffy the Vampire Slayer - Buffy Anne Summers - 1997-2003

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
277
Polubienia
35
Ocena
5
P
PrintablesModel Magic

Stargate SG-1 - Col Samantha Carter - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
243
Polubienia
28
Ocena
0
P
PrintablesModel Magic

Married with Children - Kelly Bundy - 1987-1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
243
Polubienia
32
Ocena
0
P
PrintablesModel Magic

Titanic - Jack and Rose - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
236
Polubienia
35
Ocena
0
P
PrintablesModel Magic

Stargate SG1 - Gen Jack O'Neill - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
236
Polubienia
29
Ocena
0
P
PrintablesModel Magic

Stargate SG-1 - Teal'c - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
221
Polubienia
26
Ocena
0
P
PrintablesModel Magic

Batman & Robin - Poison Ivy (Uma Thurman) - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
220
Polubienia
37
Ocena
5
P
PrintablesModel Magic

Sci Fi Movies - Starship Troopers - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
216
Polubienia
29
Ocena
0
P
PrintablesModel Magic

Married with Children - Al Bundy - 1987-1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
213
Polubienia
33
Ocena
0
P
PrintablesPaul Shpakov

1997 RAV4 floor to frame plugs

These plastic plugs replace the metal plugs under the sound deadening mat in the front floor panel. Print them from PETG and install them with silicone sealer. Watch the video here: https://youtu.be/OcwkOysXtds Print instructions Use PETG…

Pobrania
204
Polubienia
8
Ocena
0
P
PrintablesHenne

Sonnenblendenhalter Opel Corsa B 1997

Bricht wohl gerne mal ab und das wäre der Ersatz. Kann sein das er noch bissel straff sitzt. Vll aus TPU oder PETG drucken ansonsten nochmal melden.

Pobrania
203
Polubienia
16
Ocena
5
P
PrintablesModel Magic

Johnny Bravo - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
191
Polubienia
39
Ocena
0
P
PrintablesModel Magic

Batman & robin - Mr. Freeze - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
191
Polubienia
32
Ocena
0
P
PrintablesModel Magic

Stargate SG-1 - Daniel Jackson - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
188
Polubienia
24
Ocena
0
P
PrintablesModel Magic

Stargate SG-1 - Col John Sheppard - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
185
Polubienia
29
Ocena
0
P
PrintablesModel Magic

Married with Children - Peg Bundy - 1987-1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Pobrania
159
Polubienia
27
Ocena
0
P
PrintablesAngry Joe

1997 Volvo S90 Cam Lock

This is a cam lock to enable you to complete a timing belt replacement on your 1997 Volvo S90 with the 2.9L straight 6, (Vin Code 96), engine code B6304S. This model may require some slight trimming if the print suffers from elephant…

Pobrania
153
Polubienia
19
Ocena
0
P
PrintablesModel Magic

Batman - Suit Collection - Batman & Robin - 1997

Batman - Suit Collection - Batman & Robin - 1997 3D printable model.

Pobrania
138
Polubienia
27
Ocena
0

1997 - 2004 Mercedes Benz SLK 230 Kompressor Dash Vent

Print with a High Temp PLA or PETG Used FILACUBE HT-PLA Has worked great. Survived a Texas Summer very little distortion

Pobrania
137
Polubienia
14
Ocena
0
P
PrintablesSpark Models

1992 Daihatsu Hijet / 1997 Asia Towner

This is a Sketchfab converted model, it is a 1997 Asia towner, however I have customized two and made both a Towner and a 1992 Daihatsu Hijet, I hope you enjoy! Link to original model: Asia Towner / Daihatsu HiJet - Download Free 3D model…

Pobrania
133
Polubienia
8
Ocena
0
P
PrintablesModel Magic

Married with Children - Buck Bundy - 1987-1997

Married with Children - Buck Bundy - 1987-1997 3D printable model.

Pobrania
132
Polubienia
24
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Johnny Rico - 1997

Starship Troopers - Johnny Rico - 1997 3D printable model.

Pobrania
125
Polubienia
20
Ocena
0
P
PrintablesModel Magic

Iconic Movie Props - Men in Black - Neuralyzer - 1997

Iconic Movie Props - Men in Black - Neuralyzer - 1997

Pobrania
115
Polubienia
17
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Jean Rasczak - 1997

Starship Troopers - Jean Rasczak - 1997 3D printable model.

Pobrania
113
Polubienia
22
Ocena
0
P
PrintablesPaul Shpakov

1997 Toyota RAV4 rear ashtray floor light

This part replaces the rear center console ashtray in your first generation Toyota RAV4 (1994 - 2000). Watch the video here: https://youtu.be/IHYhd5vFEI4 Print instructions Use Toyota screws 93568-55014 and an adhesive LED light strip.…

Pobrania
113
Polubienia
7
Ocena
0
P
PrintablesModel Magic

Married with Children - Bud Bundy - 1987-1997

Married with Children - Bud Bundy (David Faustino) - 1987-1997 3D printable model.

Pobrania
111
Polubienia
20
Ocena
0
P
PrintablesGrayWolff

Lexus LS400 AC Vent - 1997 - 2000

This is an IMMOBILE vent insert. It is meant to replace all moving internals via friction fit. Printed in PA612 CF (probably overkill) but fits nice and snug. I suggest painting in your supports just along the louver edges. The client…

Pobrania
106
Polubienia
8
Ocena
0
P
PrintablesAlex Muresan

1997-2001 Toyota Camry 6x9 Speaker Adapter

Printed on Ender 3 Pro. I would suggest printing the two sides seperately even if your printer is big enough for the full model. The sides are made to allow enough leeway that a few mm adjustment can be made without a problem.

Pobrania
104
Polubienia
10
Ocena
1
P
PrintablesModel Magic

Starship Troopers - Dizzy Flores - 1997

Starship Troopers - Dizzy Flores - 1997 3D printable model.

Pobrania
104
Polubienia
17
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Zander Barcalow - 1997

Starship Troopers - Zander Barcalow - 1997 3D printable model.

Pobrania
102
Polubienia
17
Ocena
0
P
Printables3d tisk - Sam

Wall art - Porsche 911 1997

Beautiful silhouette of the Porsche 911 1997. Suitable, for example, for hanging or just for display. I also recommend it as a gift for lovers of cars, formulas and others... Beautiful print! You can change the scale as you like, but…

Pobrania
101
Polubienia
18
Ocena
5
P
PrintablesModel Magic

Starship Troopers - Carmen Ibanez - 1997

Starship Troopers - Carmen Ibanez - 1997 3D printable model.

Pobrania
100
Polubienia
17
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Ace Levy - 1997

Starship Troopers - Ace Levy - 1997 3D printable model.

Pobrania
99
Polubienia
20
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Carl Jenkins - 1997

Starship Troopers - Carl Jenkins - 1997 3D printable model.

Pobrania
98
Polubienia
16
Ocena
0
P
PrintablesCarDesignLab

Ferrari F50 (1997)

Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art

Pobrania
91
Polubienia
14
Ocena
5
P
PrintablesAry Fraga

Silverado 1997

desenvolvida por IA e qualquer pedido é so entrar em contato.

Pobrania
86
Polubienia
16
Ocena
0
P
PrintablesModel Magic

Starship Troopers - Sgt. Zim - 1997

Starship Troopers - Sgt. Zim - 1997 3D printable model.

Pobrania
82
Polubienia
17
Ocena
0

1997 - 2004 Mercedes Benz SLK 230 Kompressor Headliner Emergency Roof Lock Cap

1997 - 2004 Mercedes Benz SLK 230 Kompressor Headliner Emergency Roof Lock Cap Print with a High Temp PLA or PETG Used FILACUBE HT-PLA Has worked great. Survived a Texas Summer very little distortion

Pobrania
82
Polubienia
4
Ocena
0
P
PrintablesModel Magic

Iconic Movie Moments - Titanic - Rose on the Grand Staircase - 1997

Iconic Movie Moments - Titanic - Rose on the Grand Staircase - 1997

Pobrania
78
Polubienia
13
Ocena
5
P
PrintablesAngry Joe

1997 Volvo Washer Fluid Cap

This is a quick little design I made to replace a broken windshield washer fluid reservoir cap. It may fit other models but it's specifically for the 1997 S90. It has a tether that needs to be inserted in the body frame hole like the OEM…

Pobrania
77
Polubienia
11
Ocena
0
P
PrintablesModel Magic

Space Rovers - Mars Sojourner Rover - 1997

Space Rovers - Mars Sojourner Rover - 1997 3D printable model.

Pobrania
76
Polubienia
12
Ocena
0
P
Printablesbosstang

Dome Light Lens Ford 1980-1997 F250

I didn't care for the dingy, yellowed dome light lens in my F250, so I made a new one. This should fit 1980-1997. Also included a plain one to fit various 1980-1997 Ford, Lincoln, and Mercury dome lights.

Pobrania
74
Polubienia
13
Ocena
0
P
PrintablesCougar694u

Jeep Wrangler TJ 1997-2006 Third Brake Light Extension for 33 inch spare

Very rudimentary spacer to raise the 3rd brake light up 1" to clear my 33" spare. How I Designed This Removed the 3rd brake light and measured rough estimates. Could be optimized, but it works. Category: Automotive

Pobrania
72
Polubienia
15
Ocena
0
P
PrintablesModel Magic

Anaconda - Paul Serone - 1997

Anaconda - Paul Serone - 1997 3D printable model.

Pobrania
68
Polubienia
19
Ocena
0
P
PrintablesModel Magic

Iconic Movie Characters - LA Confidential - Bud White, Ed Exley & Jack Vincennes - 1997

Iconic Movie Characters - LA Confidential - Bud White, Ed Exley & Jack Vincennes - 1997

Pobrania
65
Polubienia
12
Ocena
0
P
PrintablesCrancher

Lego 30120 Helmet UFO high quality part 1997-1998

Lego 30120 Helmet UFO high quality part 1997-1998 print with supports, lay onto the forehead for best adhesion if fit is too tight print in 101-102% scale

Pobrania
59
Polubienia
15
Ocena
0
P
Printablesdanishdesign

Volvo V70/S70/XC70 etc generation 1 (1997-2000) internal door handle fix

The cable from the internal door handle to the latch can break, and the part is no longer available (the cable for generation 2 seems to still be available). This guy made a fix with some cable ties: and I actually think it is a good and…

Pobrania
55
Polubienia
13
Ocena
0
P
PrintablesJ Estrada

1997 1998 Jeep Wrangler Fan Control Knob

This is a replacement fan control knob for a 1997-1998 Jeep Wrangler. A small area has been notched for paint to be applied to indicate direction. For use with controls that use sliders for output area and heat/cool mix. If your Wrangler…

Pobrania
48
Polubienia
4
Ocena
0
P
PrintablesModel Magic

Iconic Movie Posters - Titanic - 1997

Iconic Movie Posters - Titanic - 1997

Pobrania
45
Polubienia
7
Ocena
0
P
PrintablesEngGraph

GTA 1 - Grand Theft Auto - 1997 - Retro WallArt Decoration

Grand Theft Auto" (GTA 1) is a video game released in 1997 that laid the foundation for the successful GTA series. The game offers an open world where players can explore various cities from a top-down perspective and complete criminal…

Pobrania
43
Polubienia
14
Ocena
0
P
Printablesetalon11

Window Stopper for German EGE Windows (around 1994-1997)

I saw a lot of window stoppers here on printables but did not find the correct one for my windows. So I measured my window and designed a model on my own with Tinkercad. Wall Loops = 3 Infill = 30% Layer Height = 0.20 mm No Support No Brim

Pobrania
38
Polubienia
1
Ocena
0
P
PrintablesInigoe

Joying 1 din display holder adapter for 1997 - 2001 Subaru Forester & Impreza

This model will let you mount a Joying single din touch screen head unit in a 1997 - 2001 Subaru Forester or Impreza (that has a forester dashboard) on the dashboard. The original radio locations in these cars is not very practical,…

Pobrania
34
Polubienia
11
Ocena
0
P
PrintablesOdei Alba

Toyota RAV4 1997 Switch cover

My sister lost one of the switch covers for her blue Toyota Rav4 from 1997, so she asked me to make the four of them i blue for her. Check this video (Click here if the video doesn't work)

Pobrania
32
Polubienia
0
Ocena
0

Blood 1997 Pc Game

Blood 1997 Pc Game

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesBoostnboogie

1997 Acura cl speaker door mount

The design was to fix/upgrade a 1997 Acura cl door speaker mount. The original mount needed a spacer to give widow clearance between the replacement speaker and windows. filament ptgcf 0.3mm layer height, 30% infill support cubic. On a…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesLuky Longi

license plate light for Mitsubishi L200 1997-2006

Exact copy of the license plate light for Mitsubishi L200 1997-2006

Pobrania
29
Polubienia
6
Ocena
0

1997 F150 Gas Cap retaining tether strap

Print using flexible TPU. Works great

Pobrania
29
Polubienia
7
Ocena
0
P
PrintablesMatthew T

Speaker rear adapter celica 1997

Celica rear speaker adapter plate. I chose to file down the car bracket a little in 2 places to help it fit tight, or you can add some height to the model if you prefer. This fits a 6 1/2 inch speaker using the existing holes in the cars…

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesCor ten Hoor

Mitsubishi colt hat shelf hinge point from 1997

replacement part mitchibitie colt hat shelf hinge point from 1997 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 25% Filament: raster PLA Black Notes: replacement part…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesB

1980–1997 OBS Ford Power Window Regulator Gear

After holding off for years on buying a replacement window gear for my 1989 Ford Ranger XLT, and then having my online order abruptly canceled by the seller 😅, I finally set out to design and print my own. I initially intended to use ABS.…

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesBen Fuhler

OBS Chevy replacement recline handle 1997 C1500/K1500

This handle should fit most GM trucks from 1995 to 2001, although I’m not certain of the exact years. It fits very well and holds up well. I printed my original one over two years ago, and the passenger side OEM recently broke, so I…

Pobrania
18
Polubienia
6
Ocena
0
P
PrintablesTyler L

1997 Ford F-150 Bench cup holder adaptor

I made this because the cup holders in my old F150 are short and way too wide to hold a normal drink without just tipping over. This prints easily just use your preferred print settings, I would use at least 15% infill though. Support My…

Pobrania
16
Polubienia
3
Ocena
0
P
Printablesp928s1984

Xmod 1997 Toyota Supra Front Clip

Xmod RC front clip for a 1997 Toyota Supra Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: .2 Infill: 100 Filament: generic pla Category: R/C Vehicles

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesNullSector

1997 Audi a4 remote

my audi a4 1997 remote broke so i had to make a new one, disassemble old one, place it in printed one, and you are good to go, needs 4 tiny screws (i found laying around i dont know what size they are)

Pobrania
15
Polubienia
2
Ocena
0
P
Printableschemteacher628

Turbolaser Replacement for Sega Star Wars Trilogy Pinball 1997

This is a replacement turbo laser for the Sega Star Wars Trilogy Special Edition pinball machine from 1997. It was made from a 3D scan of the original part. For best visual results, print the part in the orientation that it is in when…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesDPs_Designs

Motley Crue 1994–1997 Name Logo

Kickstart your heart and bring the raw, heavy-metal aesthetic of Mötley Crüe straight to your wall! This piece captures the gritty, script-style 1994–1997 era logo with optional skull crossbones and miniature skull umlaut dots. This model…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesGeek1sh

Rack & Pinion/Steering Rack Bushing For Honda CR-V RD1 (Gen1) 1997-2001

Applicable Models: Honda CR-V 1997-2001 RD1/Gen1 PRINT NOTES: Material: TPU 95A (I recommend NOT softer than 85a) Walls: 99 (Far more rigid compared to 100% infill, but as you like) 1x "Steering Cut Bush" 2x "Steering Bush" (Naming is a…

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesJoe Butler

1993-1997 Ford Ranger Cassette Player Button

Replacement rewind button for 1993-1997 ford ranger radio. Mirror model for Fast Forward button

Pobrania
8
Polubienia
0
Ocena
0
P
Printablestpancoast

Dodgy Mississippi Queen and Black Rose Organizer (1997 version)

I wanted to retire the box for the Black Rose expansion for Mississippi Queen. I designed a box for all 8 river boats, and a separate box for the passengers, ruler, cabins, and die. I don't make any attempt to fill up the interior of the…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesGladdy

1994-1997 Honda Accord station wagon tonneau cover rail replacement

This is a reasonably robust, minimalistic solution to broken plastic tonneau cover rails in 5th gen Honda Accord station wagons. With the parts out of production and used ones going for $150-$300 USD, this will let you cover your cargo…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesjarnMod

Figurine Repair Parts: Unbending Ayanami Rei Vintage 1996 - 1997

Update 11 May 2026 : Add Replacement part for Rei's student bag for the 1997 School Uniform version. This upload aims to control, reduce bending/deformation of the models in photos. It includes Base, support pole, grip, and a schoolbag.…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesSchweller3D

Aprilia SR50 Old (1992–1997) – Frame Number Cover / Inspection Hatch

Is the frame number cover / VIN hatch missing on your classic Aprilia SR50 Old (first generation, manufactured from 1992 to 1997)? Since these original plastic parts are virtually impossible to find or often broken, I 3D-modeled a custom…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesT&T Automotive

Ignition Coil Stand/Display for 1983-1997 Ford 5.0l

Ignition Coil Stand/Display for 1983–1997 Ford 5.0L This stand makes a great display and engagement tool for an automotive repair shop. It can be used to show an old coil versus a new coil. While designed from a 1994 Ford F-150 ignition…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesLEska1737

Air intake covers (interior) for Ford Transit 1997

Air intake covers (interior) for Ford Transit 1997 Left and right

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesCrazyeyes1011

OBS Ford Taillight Bulb Hole Plug - 9007 / HB5 Twist-Lock Cap (1992-1997 F-Series & Bronco)

Plugs the bulb opening in the back of the OBS Ford composite headlight housing while the bulb is out. Use it to keep dust, moisture and bugs out during storage, or to seal the housing while you clean or restore it. It twists in like the…

Pobrania
2
Polubienia
2
Ocena
0
P
Printablesn a

gopro/dji/action cam mount 1990-1997 5th gen accord - phone holder attachment

phone holder mount, my action cam kit came with a phone holder so I decided to modify Honda Accord 90 ~ 97 accessory button phone holder mount by GayPN To fit a go pro mount in my poverty button on my 5th gen honda accord. Use pet-g, abs,…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesMagmacode

52 mm gauge pod for VW Golf 3 (Golf III, Mk3) and Vento, 1991–1997 – accessory slot, no drilling

Plugs into a blank slot below the heater controls of a Golf 3 instead of a cap and holds one 52 mm gauge flush. For the VW Golf 3 (also called Golf III or Golf Mk3, type 1H), including GTI, VR6 and Vento : the pod plugs into an accessory…

Pobrania
2
Polubienia
1
Ocena
0
P
Printables

1993-1997 Ford Ranger Cassette Player Button

Replacement rewind button for 1993-1997 ford ranger radio. Mirror model for Fast Forward button

P
Printables

Rack & Pinion/Steering Rack Bushing For Honda CR-V RD1 (Gen1) 1997-2001

Applicable Models: Honda CR-V 1997-2001 RD1/Gen1 PRINT NOTES: Material: TPU 95A (I recommend NOT softer than 85a) Walls: 99 (Far more rigid compared to 100% infill, but as you like) 1x "Steering Cut Bush" 2x "Steering Bush" (Naming is a…

P
Printables

Ferrari F50 (1997)

Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art

P
Printables

GTA 1 - Grand Theft Auto - 1997 - Retro WallArt Decoration

Grand Theft Auto" (GTA 1) is a video game released in 1997 that laid the foundation for the successful GTA series. The game offers an open world where players can explore various cities from a top-down perspective and complete criminal…

P
Printablesgaspain

Useless cubby mount: Phone or tablet, Toyota Land Cruiser 80 series, Lexus LX 450, 1995-1997, FZJ-80

Part 1 FZJ-80 AMPS mount: Fits into the "useless cubby" location. Incorporates a unique arm that cantilevers to the frame crossbar which makes this much more rigid than other alternatives. Is able to fit two AMPS ball mount plates.…

Polubienia
4
Ocena
0
P
Printablesgaspain

Cobra CB mount, replaces ashtray. Toyota Land Cruiser 80 series, Lexus LX 450, 1995-1997, FZJ-80

This fits the (2023) CB radio Cobra mini 19 AM or AM/FM https://amzn.to/3GzVGT1 The ashtray and its carrier will need to be unscrewed. This replaces it. Utilizes existing OEM screws. Print with 2-3 walls in ASA filament. Front face down…

Polubienia
8
Ocena
0
P
Printablesgaspain

DIN mount for 2 meter HAM radio: Toyota Land Cruiser 80 series, Lexus LX 450, 1995-1997, FZJ-80

DIN mount for 2 meter HAM radio: Fits in the radio or glove slot. Fits Radioddity DB25-D DMR or Retevis RT73 DMR or other radio that is 123x43mm. Includes two removable switch mount plates. Note, programming cable will need to be non-90…

Polubienia
11
Ocena
0
P
Printables

Stargate SG1 - Gen Jack O'Neill - 1997

Stargate SG1 - Gen Jack O'Neill (Richard Dean Anderson) - 1997 3D printable model.

P
Printables

Stargate SG-1 - Col John Sheppard - 1997

Stargate SG-1 - Col John Sheppard (Joe Flanigan) - 1997 3D printable model.

P
Printables

Stargate SG-1 - Col Samantha Carter - 1997

Stargate SG-1 - Col Samantha Carter (Amanda Tapping) - 1997 3D printable model.

P
Printables

Batman & robin - Mr. Freeze - 1997

Batman & robin - Mr. Freeze (Arnold Schwarzenegger) - 1997 3D printable model.

P
Printables

Stargate SG-1 - Daniel Jackson - 1997

Stargate SG-1 - Daniel Jackson (Michael Shanks) - 1997 3D printable model.

P
Printables

Stargate SG-1 - Teal'c - 1997

Stargate SG-1 - Teal'c (Christopher Judge) - 1997 3D printable model.

P
Printables

Married with Children - Al Bundy - 1987-1997

Married with Children - Al Bundy (Ed O’Neill) - 1987-1997 3D printable model.