176 modeli
My pipe got broken and dyson didn't have stock for replacement, so i made mine. i printed with MK3S, PLA, 100% infill, 0.1mm, organic support
Wydruk około 6,52 €–7,96 € nettoWstępna wycena jednego wariantu
Modified with Tinkercad and sliced with Cura
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
model was printed on Prusa MK3S+. material: PLA layer: 0,2 mm perimeters: 4 infill: 20 %
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Tag for a 222mL aluminum to indicate what is growing inside it.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
A cover for 222mL aluminum can avocado seed holder.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
22/05/2023 - Update Have now printed the .222 100 round box, it works well however its a little tight, the rounds fit but i may either reprint with slightly larger holes or just run a round sanding bit through them 07/05/2023 - Update…
UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
I designed this for mains wiring up a 3D printer under the hood. The Voron SW uses 2 power supplys, and needs some wiring to be done. I could have used blades, and made a wire harness, but I wanted something I could easily take apart to…
👾 Game Over for Messy Wiring! Who says electrical organization can't be fun? Introducing the most unexpectedly adorable DIN rail mount you'll ever print – and yes, it totally looks like a Space Invaders alien! Sometimes the best designs…
This model is compatible with the lego system.
A relative had this contraption with two lamps and wanted to hide the WAGO terminal blocks: So I designed a simple, wall or ceiling-mounted junction box to split the two-pole 6mm x 3mm cable into two. It has a strain relief for all three…
Replacement Hella 158 222-00 Polypropolene Cover for Halogen Headlamp Cover Fits Mercedes, BMW Mini
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Had this for a bit and decided to post it even though I have not printed it yet, which I really hate to do as I think everyone should print their own project first just to make sure nobody else wastes material and time but I just don't…
This model is compatible with the lego system.
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
This model is compatible with the lego system.
This model is compatible with the lego system.
A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
The original design worked perfectly holding 2 connectors but I needed it to hold 3 and mount to 3030 extrusion. So I added a 3rd slot and larger mounting holes. The Fusion 360 file is included if you need it. Print Settings Printer: P3…
I needed T slot tracks for my Einhell TC-TS 2225 U table saw, so I created some. There are two versions, one for screwing on jigs, the other one to replace the track for the miter jig. there is a slot for a M6 nut. In both versions, the…
I like the look when painted with opaque acrylic - the print layers look like wood grain.
A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. Tested in PETG 0.15 layer height…
Headlights for Loader 1/4 Caterpillar Style for Burnie222rc loader Material: -Petg clear -Pla or Petg Black 2x -3mm orange led for turn signal 2x -5mm white LEDs (I used the low profile ones inserted from the front of the headlight) 2x…
Welcome, and thank you for choosing my model. I will provide some context for this model. Information I have designed holders for the WAGO 2273, 222, and the famous 221 series, compatible with all available sizes of these connectors. For…
A 24mm high spacer to fit into the Dell S3222HG monitor's recessed VESA mount so that larger VESA plates/rails can be used. Its overall dimensions are 121 x 121 x 24mm. Make sure to use the appropriate length screws to prevent damaging…
I decided my Gretsch Junior Jet could use a little more color. I copied the spline from the original pickguard and added the ‘G’ logo from Gretsch drums. This is sized for the stock pickup rings. This printed great for me in PLA on my…
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
Ersatzteil für den KOENIC Schokobrunnen KCF 2221. Ob er auch für andere Modelle passt, kann nicht beurteilt werden. (Ein Schokobrunnen reicht mir ;) - Hier ist der Aufsatz für das Außenrohr der Schoko-Transportspirale gebrochen. Es wurde…
Moen cartridges last a long time and are pretty easy to get out – unless they've been in there for decades. This tool will allow the twisting action to get it free. If the cartridge has been in there for decades, then you will need to…
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
This model is compatible with the lego system.
It is simple. It is compact. It stays in place. It has a very satisfying snap when you mount the connector. It fits all versions of the Wago 222 Series connectors. Instead of leaving your connectors hanging, print this and tidy up your…
Full credit for the design, hook geometry, and construction goes to the original creator—this remix merely adjusts the orientation of the mounting hole. Print settings: PETG, 15% infill, "Gyroid" infill pattern, 3 wall lines. No support…
German: Halterung für den Einbau in einen Heizkreisverteiler ohne Hutschiene. Platz für 16 Wago-Klemmen = Zuleitungsverteiler, 6 Räume und 11 Heizkreise. English: Bracket for installation in a heating circuit manifold without DIN top-hat…
This loading block is sized for the .222 Remington cartridge and works with all of its longer or equal length derivatives. 20 mm clearance is provided for powder funnels. Look for my .221 Remington Fireball loading block for shorter…
This is a part for the Snapper snowblower model # 8246 called a Block 2-8222. This is not a perfect replica but an approximation. I recommend higher infill for strength. The black part photo is of the original part, the other is of my…
Out-Back Tray-packing puzzle by Stewart Coffin (STC #222) Fit all five pieces into the rectangular opening. Out-Back is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't... if it seems…
English A simple wall mount for my YT-Industries Decoy ebike charger. Model: BC222360040 Should be equivalent to the MDA254 (www.mdacharger.com). Use two 4.0 or 4.5 mm countersunk bolts for mounting. Deutsch Eine einfach Wandhalterung für…
Welcome, and thank you for choosing my model. I will provide some information for this model. Information I have designed holders for the WAGO 2273, 222, and the famous 221 series, compatible with all available sizes of these connectors.…
I bought my Tektronix 50 MHz scope used a few years back. It came missing the control knob for trigger level. I would frequently swap the "holdoff" knob, located directly below it, until one day, one of the two prongs seating the knob…
Requires 2x M4 x 12 Socket Cap screws + nuts and 2x Drop-in T nuts to mount to frame. I used these T-nuts and worked perfectly - https://www.printables.com/model/117699-drop-in-t-nut-3030-profil-m3-m4-m5
This was my first farm to table print, I have an amazing old Pfaff 1222e sewing machine. I woke it up and flicked the take up lever which crumbled in my hands,… this left the knurled metal pivot intact but no way to turn it. I measured…
No support necessary, 95A TPE FLEX strongly recommended.
4.75" 120mm Headlight Cap Bulb Dust Cover Hella 158 222-00 2-Pin Deutsch Connector DT2 added in for Auxiliary High-Beam lights Connect your auxiliary lights while retaining the waterproof seal of the Hella 158 222-000 dust cover
--- English --- I need a bracket for Wago 222-415 for the DIN top-hat rail in the distributor of the underfloor heating, which I can label. I repaired the holding lugs in the original model, also. For use with 12 mm P-Touch labels. ---…
222 REM box by request. never printed, just published, This is a remix of the 5.56 box. Lids should be interchangeable.
Der Bohnenbehälter verstopft immer die Schraube des Shredders. Für die Demontage bei Problemen immer ein Gefussel.
I couldn't find a wall mount for the Lego McLaren 42228 set other than a 3D print from the UK for $12 with shipping. ended up making it myself. It holds the McLaren to the wall and secures it with a pin. I had to use a M4x50mm countersunk…
Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…
Basic holder for the WAGO 222-415 terminal block. The block can be pushed in from the side and is held in place by friction.
Need to get your table surface clean and clutter-free? Just mount all that USB stuff under the table! For easier mounting apply some double-sided tape to the holder. Then do a test fit, and secure with two 3mm screws. To clear the cable…
It is designed to fit the 2-connectors version, but will also click onto 3-connectors and 5-connectors just fine.
This is a replacement part for my Einhell TC-TS 2225 U table saw. My original angle jig including the T track broke, so I had to re-create both. My goal was to build something that can work as replacement part and as upgrade part.…
Wago 222-413 terminal block mount, that holds 2 pcs side by side.
This loading block is sized for the .222 Remington cartridge and works with all of its longer or equal length derivatives. 20 mm clearance is provided for powder funnels. Look for my .221 Remington Fireball loading block for shorter…
Replacement Brake shoe - Aristo-Craft part 22200-86 equivalent. For Aristo-Craft Alco FA-1,FB-1,U25B,RS-3,Center Cab and Lil Critter locomotives.
German Traffic Sign 209-30 (also 211, 211-10, 222, 222-10) in original size (600 mm). The signs in parentheses simply differ in the angle of the arrow - no special models needed for that. Rescale as needed.
Basic holder for the WAGO 222-415 terminal block. The block can be pushed in from the side and is held in place by friction.
Print as oriented in the file with supports and 100% infill. I used PLA, but PETG or ABS would probably make a more robust part.
Removed some top tabs for simplicity & moved tab to center Category: Electronics
A version o the Waterproof jonction Box model By SnaKKo, who fits WAGO 222-415 inside. Very useful for my Sailboat electric instalation. I use PG7 Connector for the holes ( Link here .) And i screwed a DC-DC Buck Case in the middle ( Link…
Door for cabin filter for diy install filter. More info here
Test tab moved to center where my blocks have it, removed some of the upper clip things for simplicity, added screw holes. Category: Electronics
DIN rail mount for four 5 terminal Wago 222s
.222 Remington Magnum Loading Block stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
The original part breaks easily on this monitor, this is a replacement part In order to replace the part you need to remove the monitor plastic cover (you need to start from the frontal frame, it's easy), look for a video on youtube,…
ARTE&DISIGN GT222 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Replacement feet for the Sony TA F222ES stereo amplifier (and probably similar series). Adding an additional 1mm (±0.1mm) adhesive rubber pad at the bottom is advisable. Vertical spacing is identical to the original once the pad is added.…
Design: I wanted to protect my Fibaro FGS222 module from the dust as it's located inside dry wall. I started from the model Casing for Fibaro dimmer and junction block from Mario M and adapted it to my module and need. The hole for the…
Holds Wago 222-415 and easily mounts to a anything with a .5in hole spacing. To put the wagos in you slide them in and push them until they snap into place.
Customized version of http://www.thingiverse.com/thing:1417160 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1417160 Instructions Using the following options: filter_diameter_mm = 73.5 drive_size_inches…
Turn a used Coca-Cola 222mL can into a container for germinating avocado seeds.
I replaced the stock pickups on my Gretsch G2220 Jr Jet with TVJones Thunderblades. The original pickup rings were a bit too tight. I thought there could be a better solution. Direct mount the pickups to the ring. I printed these in PETG…
I made these dampers for the Philips EP2220 espresso machine. I did not like the look of other models on this platform. They mute the vibrations of the machine to the worktop. I have a wooden worktop and it helps a lot. The dampers might…
Since the DeLonghi fully automatic coffee machines do not have a holder for the hot water nozzle, I designed a simple holder to stick on. The holder can either be glued on as shown in the photos or rotated by 90°.
I needed a surface mount for the presence sensors to mount and test the positioning them before I cut big holes in the ceiling and regret the position later.
CNC V14.01.222 I a update dezine for a bigger Version of https://www.thingiverse.com/thing:4497369 Dezine for internal parts for https://www.thingiverse.com/thing:4497369 to follow later Category: 3D Printing
.222 Remington Magnum Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
Made it for a friend, seems the charge you 15 euros for it. So I printed it for 13 euro cent a piece. Also a little modified version as my friend didn't trust printed plastic much :(. Use PETG or ASA or stronger plastic.
Complete 4S battery module from Polestar 2, Volvo XC40 and C40
I normally model lower than the complete height to make retrieval of contents easier. Adjust as desired Will hold around 200 sheets of normal paper I like to hide my seams in the back or in the interior seam Other sizes easily made in the…
Deflector para evitar que el aire acondicinado tire aire hacia abajo en la terraza ,
German: Halterung für den Einbau in einen Heizkreisverteiler ohne Hutschiene. Platz für 16 Wago-Klemmen = Zuleitungsverteiler, 6 Räume und 11 Heizkreise. English: Bracket for installation in a heating circuit manifold without DIN top-hat…
Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…
Las cuchillas de la batidora de mano Orbegozo BT2220 se pueden desmontar para poder lavarlas. El problema es que la pieza cónica de plástico que se encaja en el motor lo hace mediante dos pestañas de plástico muy frágiles, que se rompen…
Your Nukit Lantern can snap into this 3D-printed box, enabling you to flush mount it any surface and protect it from tampering- or simply for a cleaner install. The box can be printed without support using PLA. The emitter's vents will…
stl Datei muss skaliert werden von 100% auf 1000%
Use case, I was asked to create a toy helicopter that could carry a net to be used in toy dinosaur rescues. I couldn’t find a suitable model so I used Ai tools to quickly make a model and modify it to fit. Elapsed design time 45 minutes…
These decorated plates snap to the front of your Nukit Lantern, enabling you to transform them into a number of fun, kid-friendly shapes. You can also decorate the plates with stickers and markers before snapping them onto your Nukit…
1U 19 inch rack front panel mount for one 222mm wide switch and a blanking plate
Use supports and infill.
Upgrade your shower with this custom-designed knob tailored for Moen 1222-style valves. Featuring a precise 10mm D-shaped stem slot, this knob ensures a snug, reliable fit for your valve. The ergonomic 45mm diameter and 35mm height…
Key Switch for craftsman bandsaw 113.248510 Remixed from https://www.thingiverse.com/thing:2428459 as a starting point. made easier to print flat. Should work for both 22256 or 22255 but I haven't tested it for a curved switch model.
