Wyniki wyszukiwania: 2280

Sortowanie

Liczymy pasujące modele…

P
Printablesbigrjsuto

Datto ALTO 3 V2 m.2 2260 to 2280 adapter

Very simple bracket to allow m.2 2280 drives to fit on the Datto ALTO 3 V2 board, which is designed to only hold 2260 m.2 drives.

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
4
Ocena
0
P
Printablesnzalog

2230/2242/2260 to 2280 m.2 adapter ssd

Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…

Pobrania
7985
Polubienia
332
Ocena
4,95
P
PrintablesJohn Carroll

M.2 2230 to 2280 SSD adapter

This is an adaptation of the m.2 ssd adapter by janek0809. I took their existing Fusion 360 file and edited it to fit an m.2 2230 ssd to a 2280 slot. I also filleted a bunch of sharp corners. The nice thing about this design is that it…

Pobrania
924
Polubienia
19
Ocena
5
P
PrintablesDamir Perisa

NVME 2280 Storage Box (7x)

juggling around with nvme 2280 sticks, i needed one box for storage. here a first attempt for 7 cards. 4 clips hold it closed, easily openable, fits cards without squeezing them. since i have only cards without heat spreaders, i designed…

Pobrania
904
Polubienia
79
Ocena
4,67
P
PrintablesDamir Perisa

NVME 2280 storage box (4x vertical)

Next revision of the nvme 2280 storage box

Pobrania
755
Polubienia
64
Ocena
4,78
P
PrintablesEvgen

SSD M.2 2230 to 2280

M.2 adapter 2230 to 2280 simple and fast print

Pobrania
720
Polubienia
34
Ocena
5
P
Printablesuglytruck

Steam Deck External NVMe 2280 Cover

This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports. I added a revised model name…

Pobrania
530
Polubienia
82
Ocena
4,67
P
PrintablesPejek

M.2 SSD Adapter 2230 to 2280 slot (NGFF /NVMe)

Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…

Pobrania
428
Polubienia
32
Ocena
4,75
P
Printablesblecheimer

Case for M.2 SSD (size: 2280)

I am using serveral M.2 SSDs to clone and backup my computers. For storage and protection I designed a simple M.2 case. This case fits a single M.2 SSD in the very common 2280 size. Printing is easy. Use your favourite material and set…

Pobrania
365
Polubienia
25
Ocena
4,67
P
PrintablesSica

M2 NVMe SSD adapter from 2230 to 2280

I have a 2230 M2 SSD and needed to intall it on a 2280 slot.

Pobrania
355
Polubienia
33
Ocena
0
P
PrintablesPejek

M.2 SSD Adapter 2242 to 2280 slot (NGFF /NVMe)

Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…

Pobrania
320
Polubienia
19
Ocena
5
P
PrintablesPhilDT

M.2 2280 holder

Simple holder to store up to 6 M.2 2280 NVME/SATA drives

Pobrania
279
Polubienia
27
Ocena
5
P
PrintablesRego

M.2 adapter 2230 to 2280

Adapter to mount a M.2 2230 in a 2280 slot. I printed it in Jayo PETG with 3 walls.

Pobrania
261
Polubienia
24
Ocena
5
P
Printablesthall72

Lego Compatible (92280.dat) Plate 1 x 2 with Single Clip on Top

This model is compatible with the lego system.

Pobrania
261
Polubienia
15
Ocena
2
P
Printablestambaru

M.2 SSD 2242 to 2280 adapter

I used this model to install an M.2 2242 SSD in Banana Pi BPI-R3.

Pobrania
230
Polubienia
17
Ocena
0
P
PrintablesJulius3E8

M.2 Mockups for 2242 2260 and 2280 form factors

A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…

Pobrania
230
Polubienia
9
Ocena
0
P
PrintablesSidpatchy

Gridfinity M.2 2230 & 2280 Stackable Holders

The goal in designing these was to achieve the maximum possible density in the smallest possible space, while retaining the ability to stack the containers so they fit into other Gridfinity systems. M.2 2280 holder 1x2 grid units Holds 6…

Pobrania
212
Polubienia
18
Ocena
5
P
PrintablesMisterED

USB SSD 2280 M.2 Case

This is a case for a quite common USB to M.2 SSD converter. The Size of the PCB is about 27x96mm. I think its the only design here with ventilation. The case needs no screws. The fit is quite loose to be printable on my not so well…

Pobrania
205
Polubienia
16
Ocena
0
P
PrintablesTomcat2

M.2 2230 to 2280 SSD adapter

I made my own M.2 2230 to 2280 adapter, because I couldn't find any would be exactly as I wanted. Thin but holding properly. I printed it using: Bambu lab A1 mini PETG filament 100% infill normal support type Supports are important…

Pobrania
200
Polubienia
86
Ocena
0
P
PrintablesLuis B. Lobo

Dell G15 SSD 2280 Mounting Bracket

Design Log: I changed the thickness of the piece. Did a thicker base for vertical printing. Minor adjustments for better aesthetic. I printed with PETG (Grey Overture) in a vertical position with supports.

Pobrania
191
Polubienia
8
Ocena
5
P
Printables9D Printer

NVMe 2230 to 2280 Adapter

Extend an 30mm NVMe to 80mm. Work with a 0.7mm thick PCB. Category: Computer

Pobrania
172
Polubienia
12
Ocena
0
P
PrintablesThomPatterson

M.2 2242 to 2280 Length Extended Adapter

Whoops, I bought a 42mm length SATA Expansion Card but my motherboard only has screws at the 60mm and 80mm mark. This part holds my card in place with attachments at both the 60mm and 80mm points.

Pobrania
166
Polubienia
8
Ocena
0
P
PrintablesIvan G

SSD M.2 2230 to 2280 ADAPTER

I used generic PLA with 20% infill and ironing for a better finish, as well as supports. I hope you find it useful.

Pobrania
143
Polubienia
4
Ocena
0
P
PrintablesKlaus

M.2 2230/2260 to 2260/2280 adaptor

it's a tight fit but it should work. flexible adator for 2230 or 2260 cards. you should print it in ABS or in PETG under the cpu could get warm.

Pobrania
132
Polubienia
4
Ocena
0
P
PrintablesIngenuity

NVMe SSD 2280 to 22110 Extender

This extends a standard NMVe 2280 slot to fit a 22110 SSD. It screw mounts to the 2260 and 2280 standoffs and can be pre-flexed to clear components as necessary. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No…

Pobrania
128
Polubienia
13
Ocena
0
P
Printablessabaatworld

Orange Pi 5/5B Case With M.2 2280 SSD Support

Thanks @choovick for the original version of the model. This one has been modified to accommodate standard size SSDs.

Pobrania
123
Polubienia
13
Ocena
0
P
PrintablesC0rNfLaK3

Universal adapter M.2 NVME 2280-2230

Universal M.2 SSD Adapter (Multi-Format Caddy) This model is a comprehensive hardware compatibility solution designed to extend the life of your storage components. It is a rigid "Caddy" or frame that allows you to install…

Pobrania
119
Polubienia
5
Ocena
0
P
PrintablesPerpetuum

M.2 SSD 2242 to 2280 slim NVMe adapter

I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification

Pobrania
118
Polubienia
11
Ocena
5
P
Printablesmarius137

Stackable 2280/2242 m.2 Tray

Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray

Pobrania
99
Polubienia
10
Ocena
0
P
Printablesjeepers01

Raspberry Pi 5 and 2280 NVME SSD Cooler Case

Raspberry Pi 5 and 2280 NVME SSD Cooler Case The case has been designed to house an NVME drive mounted under the Pi. The available drive I had was a 2280m, being 80mm, which is longer than the case length, so it protrudes a bit. (I intend…

Pobrania
81
Polubienia
9
Ocena
0
P
PrintablesHumpaPrinta

NVME 2280 quick change bench (USB C)

As I sometimes have to attach NVME's via USB C to my computer and want to be able to chage them quickly i created this little bench You will need: 1x the USB-C to NVME adapter Buy here: https://s.click.aliexpress.com/e/_c39JjrDd…

Pobrania
77
Polubienia
10
Ocena
5
P
PrintablesDanAndersen

ICY-BOX IB-2280SSK 8X 2,5 HDD FAN ADAPTER 70MM TO 80MM

The ICY-Box IB-2280SSK is pretty cool to have 8x SFF Drives in a Desktop/Server. The cooling fan however, is pretty noisy. To ensure clearance, I created a 70mm (Icybox) to 80mm fan adapter with an extension, which ensures enough…

Pobrania
71
Polubienia
6
Ocena
5
P
Printablesjispal01

Orange Pi 5 Rollbar Case - 4010 Fan - 2280 m.2 compatible - 2.5" SSD mounting option - .96" OLED option

This case is intended to print without any support. It's a total of four parts - Top, Bottom, 2280m.2 brace and (optional) screen mount. It's accommodates 2280 length m.2 drives. It has mounting place for a 4010 fan above the Pi's SOC.…

Pobrania
63
Polubienia
8
Ocena
0

JDM 122280 John Deere Snowblower Worm Gear Bracket

Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…

Pobrania
60
Polubienia
2
Ocena
0
P
PrintablesTruckBC

SSD M.2 2230 to 2280 ADAPTER

Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…

Pobrania
60
Polubienia
1
Ocena
0
P
Printableslucabianco97

BenQ Monitor Riser (Stand Extension), GW2280

This is a stand extension for BenQ GW2280 monitor. My table is low and I wanted the top of the screens just below eye level. IMPORTANT: Exclude supports from the middle of the pocket. Support placement is shown in an image above ^. I…

Pobrania
44
Polubienia
5
Ocena
5
P
Printables0rqa

2242 to 2280 dualsided nand ssd

2242 to 2280 dualsided nand ssd

Pobrania
41
Polubienia
2
Ocena
5
P
PrintablesPrzemekgda86

Super compact container box for hard disk SSD 2280 M.2 NVME 34 pieces.

Super compact container box for hard disk 2280 M.2 NVME 34 pieces. Perfectly fitted for 2280 SSD, a very simple print. Very tight tolerance of 0.1 mm. The lid should be a press fit with a properly calibrated printer. If you cannot…

Pobrania
40
Polubienia
12
Ocena
5
P
PrintablesWowzers

2230 to 2280 M.2 SSD adapter

Converts 30mm length M.2 SSDs to a more standard 80mm.

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesDiesel336

Cresta/chaser/mark2 cabin filter door 88899-22280

Door for cabin filter for diy install filter. More info here

Pobrania
37
Polubienia
3
Ocena
0
P
Printables00Nave198

M.2 2280/22110 Combo Storage Tray

Stacks with the original DIMM Storage Tray by mars9601. I modified the original solidworks model to create these, leave a comment if you'd like me to upload the .SLDPRT. Both a 2280 only and a 2280/22110 combo are included. The models…

Pobrania
36
Polubienia
5
Ocena
0
P
Printablesjohs32

NVME 2280 USB-C Cover

Bought a cheap SSD to USB-C adapter off e-bay, and needed a cover for it, for mounting besides my raspberry pi. Very tight fit, which is what I went for. Removal might be destructive for the cover. Print slightly oversized if you want to…

Pobrania
31
Polubienia
5
Ocena
0

M.2 SSD_2280/2260/2242 -to-2230 Rack

A printable 3d model for SSD M2 Rack

Pobrania
31
Polubienia
3
Ocena
5
P
Printableszeus

Gridfinity M.2 2280 Stackable Holders - Remixed for Heatsinks

Reimplementation of the original model but with more width to acommodate NVMEs with integrated Heatsinks.

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesDecom

Case for M2-2280 USB flash drive_like lego block

May be, this model not final iteration

Pobrania
29
Polubienia
5
Ocena
0
P
PrintablesEDGeProjects

40 slot m2 2280 drive storage

40 slot m2 2280 drive storage. I printed this with a 15% infill and it was super solid and sturdy. Opted for no lid or latches.

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesRacknos

Universal M.2 NVMe SSD Adapter Set (2230 / 2242 / 2260 / 2280) – Ultralight & Sturdy

Hi everyone! Here is my universal M.2 NVMe SSD adapter set, covering all standard form factors. It allows you to fit smaller drives into larger slots—from 2230 to 2242, all the way up to 2280, and every combination in between. The model…

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesSomnus

2230 M.2 SSD to 2280 heatsink adapter

JEYI Thermal Conductive Silicone Pads: https://s.click.aliexpress.com/e/_omRiFoe Recommended JEYI M.2 2280 SSD Heatsinks: https://s.click.aliexpress.com/e/_oER99GA https://s.click.aliexpress.com/e/_opsow18 There is multiple versions of…

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesRESTLESS DESIGN

M.2 2280 Blank

This is a blank for an M.2 2280 slot / card that you can use to make any design you like. No support material needed. I would suggest printing it at 0.2mm layer height, as the thickness of the blank is 0.8mm. There's two files included:…

Pobrania
25
Polubienia
3
Ocena
0
P
Printables0.tepees.linear

M.2SSD_2242-to-2280.stl

M.2SSD_2242-to-2280.stl_1

Pobrania
25
Polubienia
0
Ocena
0
P
PrintablesKevdog114

RPI M.2 Hat+ 2280 Adapter

This lets you use a 2280 size nvme drive with the Raspberry Pi m.2 Hat+, which ordinarily does not support this size. Just use two of the screw mounts for the hat to also connect this adapter. I designed this because I didn’t read the…

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesPigLover

M2 2260 to 2280 retention bracket

Bracket to allow installation of M.2 2280 SSD in the M.2 2260 slot on SuperMicro X11SSH-TF/CTF motherboard. Requires two M3 heat-set inserts. Install bracket on motherboard in the 2260 retiontion screw hole. Other end provides proper…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesJanzisTechStuff

m.2 nvme ssd 2230 to 2280 adapter with included spacer.

I have a few 2230 SSDs left that I want to install in motherboards. However, some of the motherboards are missing the standoffs for the drives. So, I designed this remix. Use an M2.5 countersunk screw to fasten it. A small support element…

Pobrania
15
Polubienia
2
Ocena
0
P
Printables3dLizard

M.2 2280 SSD Storage Case Box — Sparekeep

A compact protective case for one M.2 2280 SSD. Only 11.1 mm thin, it fits any 2280 SSD without heatsink , NVMe or SATA, single or double-sided, and keeps the tiny M.2 screw with the drive. A taller version with a spine label is included.…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesSALITIBI

M.2 bridge 2242 to 2280

I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…

Pobrania
13
Polubienia
2
Ocena
0

M2 Nvme SSD 2230 to 2280 extender

Laptop disc extender, made with chat gpt, wery fast print, it takes around 0,9 G of PLA

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesRacknos

Slim NVMe Case - Pocket Friendly, Durable & Zero Waste - All Models 2230 - 2242 - 2260 - 2280

Hi everyone, I’ve tried countless NVMe cases, but none quite hit the mark, either they wasted too much filament or the latching mechanism was underwhelming or annoyng. So here is my take: a slide-lock case featuring a secure snap-clip…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesAXG68K

Datto ALTO 3 Mid Spacer + m.2 2260 to 2280 adapter Micro server conversion

If you like this model please like and download, it helps motivate me to make more! Please consider using the amazon affiliate link bellow for the required hardware! The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesLeftcetio

2230-2280 M.2 Spacer for Heat Sink

Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesJDIacobbo

Akro-Mils 10144 M.2 2280 Storage

This is a M.2 2280 storage box designed to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesAddmix

M.2 NVME SSD protective case 2280

For best results, print in vase mode with 0.6mm line width. I reduced perimeter speed to 50mm/s and acceleration to 500mm/s^2 to avoid coiling around the corners

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesjeepers01

NVME USB Adapter Caddy / Tray for 2280 and 2230 devices

NVME USB Adapter Caddy / Tray for 2280 and 2230 devices These caddy/trays have been designed to protect the adapters for 2230 and 2280 devices Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

M.2 2280/22110 Combo Storage Tray

Stacks with the original DIMM Storage Tray by mars9601. I modified the original solidworks model to create these, leave a comment if you'd like me to upload the .SLDPRT. Both a 2280 only and a 2280/22110 combo are included. The models…

P
Printables

Akro-Mils 10144 M.2 2280 Storage

This is a M.2 2280 storage box designed to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.

P
Printables

M.2 SSD Adapter 2230 to 2280 slot (NGFF /NVMe)

Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…

P
Printables

M.2 SSD Adapter 2242 to 2280 slot (NGFF /NVMe)

Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…

P
Printables

SSD M.2 2230 to 2280 ADAPTER

Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…

P
Printables

2230 to 2280 M.2 SSD adapter

Converts 30mm length M.2 SSDs to a more standard 80mm.

P
Printables

M.2 bridge 2242 to 2280

I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…

P
Printables

2230-2280 M.2 Spacer for Heat Sink

Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…

P
PrintablesDejan Panic

Mercedes A-class w168 number: A168 720 02 11 or Zb 228050/eizeln 228 060

This is cover for mercedes A class w168 with serial number A168 720 02 11. With mirror mode can use for both sides. I printed with low resolution on SLA printer, Can be printed with FDM also with correct orientation. Here is 2 files,…

Polubienia
2
Ocena
0