262 modeli
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
*will update more in morning its 3am im going to bed Introducing the Models 302A and 302B mini fume extractors. A more serious alternative to my kirby fume extractor, these mini fume extractors are perfect for all your small project…
This model is compatible with the lego system.
**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…
This model is compatible with the lego system.
This is a model of the X-302 Prototype with the Stargate attached to it as seen in the episode 6x02 Redemtion. Models of the 302 is basically the same as my F-302 so use the instructions there to assemble it. There are only few changes to…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Included in this mini-collection: work holding and cable management. For the work holding, the flat Genmitsu workplate has a set of M6 holes set at an unusual spacing pattern, 54mm X and 42.5mm Y. All clamps accept an M6 machine bolt with…
This model is compatible with the lego system.
Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.
This model is compatible with the lego system.
This model is compatible with the lego system.
Split up specific stls for printing with different colors in case you have an MMU or equivalent. Dark Gray bits Light Gray bits Just one of my earliest MMU edits that I never got around to uploading. Only MMU edited parts were uploaded;…
This model is compatible with the lego system.
Gehäuse für Wemos D1 mini oder andere ESP8266-Boards (Esp32, nodemcu ...) mit DHT22 / AM2302-Sensor. Case for Wemos D1 mini or other ESP8266 boards (Esp32, nodemcu ...) with DHT22/AM2302 Sensor. Print Settings Printer Brand: Creality…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Remix of original model, all credit for the design goes to the original - https://www.thingiverse.com/thing:856114 Original model caused issues when imported into Slic3r. All I have done to this model is repair issues using blenders…
This model is compatible with the lego system.
This model is compatible with the lego system.
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
Mine printed in PET-G, upper part is bigger but fits with original lego bricks. Because PET-G shrinks...
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
This model is compatible with the lego system.
Antec Case Rail Replacement rails for an Antec case. I was repurposing one of my computers to be an Unraid ( https://unraid.net/ ) server, and while moving things around, I broke one of the rails that hold in the hard drives. I looked at…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
This is the missile of the F-302 from Stargate, designed by taichl. For easier printing I made some minor changes and integrated the support material in the STL file. You can remove the support material with a side cutter. For more…
Replacement part (Pillar) 30225762 for Playmobil 5568 This part is not available from Playmobil anymore. Can be printed with PLA but I recommend PETG or ABS/ASA for more stability. Print in 0.2mm or thinner layers. Prints with no supports…
This is a movable model of the Sd.Kfz 302 "Goliath" in a scale of about 1:6 (~25 cm). The Goliath light charge carrier, a self-destructive minitank (German: Leichter Ladungsträger – Goliath), called by the Allies "beetle-tank" was a…
This model is compatible with the lego system.
This model is compatible with the lego system.
Quick remix to install it onto a 34 mm / 32.5 mm valve. Includes the adapter extension pin.
This model is compatible with the lego system.
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
This piece is compatible with Lego.
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
This model is compatible with the lego system.
This model is compatible with the lego system.
Bmw E30 - C302 accessory connectors set. You can find C302 pinouts in the ETM. This connectors using 2 types of pins: - small [amp: 927886-1, oem: 61 13 1 371 607] - large [oem: 61 13 1 359 289] Both this pins available at Aliexpress.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Similar to all other 3018 drag chains. Unique features: -The prints come out clean without any supports. -Impossible to break - falls apart instead break, tested with PETG -Build in 5.5mm DC connector for spindle - like this -Side m3x14…
This model is compatible with the lego system.
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
This model is compatible with the lego system.
Mine are printed mostly in Hatchbox white ABS with 0.35-in layer height. Fill percentage is unimportant as it is almost all perimeters. Layer height is flexible. They print best inverted (biggest surface area down) with a brim and support…
TP-Link MR3020 Wallmount in 2 Varianten: M4 Schrauben innen oder außen.
I designed this part so I could use the Makita RT0701c as the spindle for my Genmitsu CNC 3020. I wanted to use the original Z axis components cuz I'm cheap and this is a printed part and less than super-rigid anyway. Parts needed: Stock…
I've designed a simple case for the Rotation LED Clock. The enclosure has cutouts for the lightsensor and the thermometer and of course for the Display. The holes for the Buttons, the speaker and the mini-USB-Port are located in the…
Print horizontally, or it will break along the layers (see screenshot). I printed it in PETG with 100% infill, swapped out both sides so the car sits flat.
This model is compatible with the lego system.
A 65mm diameter spindle mount that replaces the original 52mm mount on the Sainsmart Genmitsu 3020 Pro Max CNC router... The new mount uses all the original hardware. It is designed primarily to be used with the Makita 700/701/702 palm…
This model is compatible with the lego system.
Requires 2 of the M2.5x4 screws included in the RAK kit. Bolted version requires 2x M2.5x8mm screws and nuts.
This is an adapter to mount the Andonstar ADSM302 microscope to a microphone stand/arm The hex opening is for a m10 nut. Most microphone arms will fit, I just replaced the imperial bolt to a metric m10 bolt on mine. Some disassembling and…
Overview Even if this mount is specifically for the Andonstar AD407 microscope, the mount may fit for other versions like AD409, AD302 and probably others, too. Just check if your microscope has a diameter of 35mm. If yes, this will work.…
This model is compatible with the lego system.
Since the Y-axis rails on the 3020 Nova are quite exposed to chips and dust, I designed these simple rail covers to protect them. They're not perfect since chips still tend to hit the rails from the side, but a lot better than nothing.…
Parts 2x printed mount 4x M5*12mm socket head screw 4x M5*10*6 hammer nut 1x M4*8mm button head screw Instruction Mount two brackets 115mm spaced onto the extrusion using M5 screw and nut Slide the power supply into the brackets and align…
This model is compatible with the lego system.
This is a width divider compatible with Akro-Mils 30230 bins. Compare to the active ingredients in Akro Mils P/N 41230! Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: No Resolution: .2 Infill: 15…
DHT22 / DHT11 / AM2302 sensor mount. Mount using zip tie or screws. Category: Electronics
This is a divider for Akro-Mils 30235 bins. I made a split version for smaller print beds. I used a 3d printing pen to join the two halves. The fusion 360 files are included. Category: Organization
DHT22 AM2302 Housing Honeycomb Style This is a housing in honeycomb style for DHT22/AM2302 sensors. Heat up the pin after putting in the sensor and push it down. Thank you to @TueftelTyp https://www.thingiverse.com/TueftelTyp/about for…
Remixed AnthonyZ71's OpenSCAD design so that it prints 2 rails fast without supports // Antec Three Hundred Two (302) 3.5" Hard Drive mounting rails (remix of https://www.printables.com/model/112341-antec-three-hundred-two-302-35-hdd-rail…
For the longest time, I've had my input mixer leaning up against some small boxes. Then I printed the stand here https://www.thingiverse.com/thing:2038119 However I didn't have a good matching set of hardware to fit snuggly against the…
This is a simple stand to use the Zyxel NR7302 indoors. It might also be compatible with the NR7301 and NR7303, but this is untested. To mount the Zyxel NR7302 to the stand you need 4 M4x15-20 screws.
I wanted to learn how to use Blender and boy what a ride... as I needed some sort of extra protection for my Flow Z13 as there is simply no extra protections for this device other than vinyl decals. Therefore, I went and use a caliper and…
Needed a mount for my enclosure to hold the AM2302 (DHT22) temperature and humidity sensor. Didn't see ones I liked that allowed for easy mounting to the 2020 extrusion frame, so I made one. I have seen these boards from Keyes, DSD and…
Microphone arm mount for ADSM302 or similar microscopes with up to 35mm in mount diameter. You will need: 3 x M3 square nuts 3 x M3x10 or similar screws 1 x M3x40 mm or similar screw These parts should be familiar to Prusa owners and will…
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
Prints vertically so may need a brim depending on bed adhesion. Tree support used
All Files Corrected 15 JAN 25 7:30 CST This is a single spoil board for the 3040 Y extension to the Genmitsu 3020 ProVer. It also includes the Lightburn 10mm x 10mm grid laser etch. I have included the NC G-Code file as well as the…
Cables dangling around maybe aren't safe but at least are ugly :) Trays: Hide all wiring. Allow to pass wiring through or from the side. Print vertical with 2 perimeters and no infill. Add 10mm brim. Glue with VHB tape Board cover…
This model is compatible with the lego system.
This rack holds all 8 drivers, in handle-size order from left-to-right. The slot is just a teense tight for the #3 Phillips-head driver. Would redo this if I could. Maybe your slicer can open it up just a little. 1mm should do. Note:…
This should be printed with PETG. This locking lever is for the tripods that have the single spiral on the locking lever.
TL;DR Saw this Maker Tales video on youtube and made the exercise in freecad. youtube Maker Tales Motivation Learning by doing Collection exercise, CAD Let's get started Enjoy the video and sketch the model in your preferred CAD software.…
Lego 3027 3028 3033 3036 3456 41539 92438 91405
This is a small case for a LoRaWAN Gateway using a Raspberry Pi Zero W and a WM1302 LoRa gateway module from Seeed Studio. The case exposes only the MicroUSB connector for power supply and an SMA connector for the LoRa antenna to minimize…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
The parts hold the PSU on the back of a SainSmart Genmitsu 3020 PRO MAX. Printed with brim to avoid warping. 11.08.2022: Update - Holder with cable guide Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Lego 3020 3021 3022 3795 3034 3832 2445 91988 4282
4X and 2X dividers for Akro-Mils 30210 (30-210) bins. Here are the upper bins shown in the photos: https://www.printables.com/model/966907-upper-compartment-for-akro-mils-30210 Note that the dividers have a bit of a wedge shape on the…
Together with my kid we made this case for his DIY clock (soldering project). The clock we have is from here: https://www.roboter-bausatz.de/p/bausatz-rotation-led-uhr-ds1302. Additionally, it requires: 5x M3 brass inserts 4x M3 6mm SHCS…
I built this EC1515B clock kit several years ago and it has just sat around without a case ever since. There are other 3d printable cases out there for these clocks, but me being me, I wanted something unique. To my knowledge, no one has…
Replacement and longer version of mounts for Signum cable organizer. 80 mm version is close to the original one. Countersunk holes for the mounting are M5 (the original screws fit), while the top hole for the thumb screw is M8×1.25 thread…
Print duration: 2h 30m Material consumption: 25.12g / 8.42m Rafts: Doesn't Matter, ideal No Supports: No (not necessary for me) Resolution: 0.2 Infill: 15 - 20% Filament brand: Any Filament color: Any Filament material: PLA
A little sanding/trimming on the mounting pins is needed if you want to be able to remove the rails easily from the HDD without too much force,
Wall mount for Bubendorff remote control (ref. 223026). I use double tape to fix the mount on the window frame. Proposed print settings : Filament : PLA Layer Height : 0.16 mm Line Width : 0.44 mm Infill Pattern : Cubic Subdivision Infill…
Pro maximalni velikost nodeMCU v3 60mm x 32mm Original model - onShape
Questo modello è il più piccolo che si possa realizzare, i Servo D1302 sono i più piccoli in commercio che ho trovato, Il led Matrix 8*8 è da 1.9, Batteria 3,7 Volt Li-po Con caricabatteria integrato nello shield, Interruttore a 6 pin e…
This enclosure was designed to fit the Geekworm X302 DAC board for the Raspberry Pi Zero W / Zero 2 W. I dimensioned the internal space using the Geekworm PCB drawing found here with a +.2mm tolerance on all 4 sides. For my board, it was…
Really liked @drwatson6 design, changed it a bit to better suit my needs. Higher tolerance for component placement on PCB (i.e. compensating for poor soldering in the manufacturing) countersunk holes for wood screws stronger pins for…
Z-Probe Holder for the Genmitsu 3020 Ultra CNC router
![M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/735325/images/5748609_a9d64cd5-5eda-4399-a8be-543f085c15c6_d84847a4-8b28-4e4c-99e6-bdd8af654401/ngrevoender5001_2400x2400.webp)
