121 modeli
A way to mount your Cobalt turnout motors, can be fixed with screws just glue.
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
These files are for printing a replica of Johnny's pistol from Cyberpunk 2077. All parts were designed to be printed in resin. A mid size printer such as a Saturn or Mono X are required for some of the larger parts. The finished prop…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
I created this simple mount for the Anker 351 power strip/surge protector so you can mount it on the back of an entertainment center, the wall, on a desk top to simply prevent it from moving, or in my case to mount it under my desk. Even…
Use this tool to measure the right distance from the front to mount your doors into an IKEA KALLAX.
Anbernic RG351p case. Designed to be printed as one model without supports The height of the case is made to add the original white foam that is added in the box with the console. If you don't have this foam the console rattles a little…
Historic Prague Tram Building kit of famous Prague historic tram 351 which has been in operation since 1915. Today it is mainly used for tourist tours of Prague or you can see it like other historic trams in the public transport museum.
Ikea #101351 dowel used in building much of Ikea's furniture. Modified with a flat base on one side for easier 3D printing. Print horizontally (as already orientated) for better part strength so the layer lines aren't parallel to the…
In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit.In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit. After…
IF YOU NEED THE EPIC ULTRA FOR THE " RG351P or M ( Plastic or Metal) FOLLOW THIS LINK: https://www.thingiverse.com/thing:4702672 !!WARNING!! After placing your RG351MP into this game pad holder, be prepared that you never ever want to…
Here is a fan duct with dual part cooling for the Ender 3 (Pro). "Unibody" version For the assembly you need: 1x 3510 fan 2x 3010 blower fans 2x M3x6 screws 1x M3x12 screw Assembly: First insert all fans into their places (M2 screws for…
Needed materials: - https://www.amazon.com/gp/product/B0776PY5JK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 -(SW3518) https://www.aliexpress.com/item/1005001682681687.html?spm=a2g0o.order_list.order_list_main.10.35981802laQqxG -(4)…
module holder (SW3516 or SW3518) with screw clamp For a 27-30mm hole for mounting P.S.: if the module falls out of your model, use glue type B7000, B8000, T7000 or others Changes in the update: (v2 update 1-Feb-2025) The shape of the nut…
RG280V, RG351MP, Nintendo New 3DS XL Grip
!!IMPORTANT!! DO NOT just slide your RG351P into the Game pad holder after Printing!! There is one important task to do before you can safely attach your Handheld to the game pad holder! CHECK Pictures for instructions!! Heat the marked…
This model is compatible with the lego system.
Anker 351 Surge Protector Power Strip Mount for Sim Lab 80x40 Aluminum Extrusion Profile. I designed this mount to perfectly fit the Anker 351 Surge Protector Power Strip on the back of my Sim Lab Freestanding Triple Vario Monitor Mount…
Here is a "unibody" remix of my previously designed fan duct with dual part cooling for the Ender 3 (Pro). For the assembly you need: 1x 3510 fan 2x 3010 blower fans 1x M3x12 screw 2x M2x5 or M2.5x5 screws (minimum) Assembly: First insert…
I needed something to display my copy of the Malorian Arms so whipped up this quick for it.
This model is compatible with the lego system.
This file contains the STL files for printing a scale model of the Ford 351 Cleveland engine for use as either a standalone model or replacement engine for a 1/24th scale model. Note that if you want 1/25th scale, use your slicer to…
Description: This is a custom-designed enclosure for the SW3518 module , available in two wall thickness options : 2mm for added durability and 1.6mm for faster printing and lighter applications. Key Features: Screwless, Sealed Design :…
Grip, front cover and stand for the Anbernic RG351V retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons or connectors on the bottom of the device. The front cover protects the screen, top…
Mount for the RG351P on the Ikea Skadis
Designed for vertical use Printed with Prusament PLA Prusa Galaxy Black Layer height 0.2mm on Prusa MK4
This model is compatible with the lego system.
Commonly listed as: Grohe 43519 DAL 330 As seen on TV!
I needed to get some grease into the differentials of my RC model car, so I remixed @Alexey's original design into a nozzle with a single opening of 3 mm diameter. See also the original model including a cap . Printing PETG, 0.4 mm…
The case fits 1x RG351MP and 2x micro SD cards Non-printable parts: 12x ⌀4mmx4mm magnets 2x button head wood screw 3mm x 20mm to 40mm in length a little bit of glue No supports are needed. Control dimensions of handheld before printing…
Ich habe das Modell von Whity angepasst, damit es für den Anbernic RG351M passt (aufgrund der ähnlichen Abmessungen könnte das Case auch für den RG351P passen). Damit auch anderes Zubehör wie Kabel oder SD-Karten, Adapter, usw. Platz…
Housing for the SW3518 charger module. Printed in pp gf30 / abs / petg - window will need to be clear for the led to shine through. Supports needed for the main housing, 20% infill Housing 35 mins / cover 23 mins / window 2 mins. Needs:…
Comfort grip for Anbernic RG351V model. Ergonomic design makes game play more comfortable. Hole on bottom allows you to charge or plug in headphones without the need to remove the grip. Designed using TinkerCad
A very slim and stylish Case to protect you RG351P. ( still waiting for my RG351M to test if it fits as well, it should but cannot say for sure until I was able to testfit) It comes in two versions, with and without an USB pass through.…
Panel mount for SW3518 / SW3516 Type-C PD board panel generally found on Aliexpress / eBay, with a cutout template to cut your panel. I used this in my Powerbank / Solar generator build. You can install the module in any order: before or…
!ATTENTION!_ EXPERIMENTAL_DESIGN! (Print if you dare!) When I did some prototyping for the RG351p gamepad holder a print failed midway as for some reason the print head must have pumped into the print and went on shifted, until it was…
print with ABS or ASA M3 screw to mount bltouch and fan
AAAAAAAAAnd yet another holding device for the RG351P. This time not as fancy with a more practical approach in design. It is super low profile and even so it does not look like very comfortable, it actually is an pretty welcome…
Mitutoyo 342-351-30 0-1" Point Micrometer Gridfinity Bin
Ersatzrad für Vorwerk Eb350/351 Teppichbürste falls das alte ausgebrochen ist, Es werden noch 4 Schrauben benötigt Spax 3 x 10 oder 4 x 10 Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
For the ARRMA 6s lineup an extended upper base to accommodate larger battery capacities or higher cell count. NOTE This will affect body mounting as the overall height of the battery tray increases (TALION/KRATON) Optional: ARRMA Body…
The handle on these ovens is exposed to the side and easily broken during shipping. This replacement attaches with the original M3 fasteners. Should be printed in a filament with some temperature resistance as the door gets quite hot…
Case for 2 Way SW3518 with XT60 no support needed 4 M2 bolts required Category: DIY
Original: based on v2 (1-Feb-2025) https://www.printables.com/model/835513-screw-holder-sw3516-sw3518 charger board case
This is a tilting enclosure for a ADF4351 (or ADF4350) RF 35 MHz to 4.4 GHz signal generator. This is sold at various places including Amazon and ebay. One problem is it comes with no housing. 3D printing solves all problems though. The…
RG351V grip (longer handles) Remixed HAYES9412 's model Printed in PETG no supports .4 nozzle
the most confortable grip I've ever test This is a remix from those two grips, merging them to make the most confortable grip for the Anbernic RG351V I've ever test. Now I can play for hours with no pain in hands.
A case for the "Commodore 64 PS/2 mouse to 1351 mouse adapter" from Melbourne Console Reproduction (melbourneconsolerepros.com). The case is a really good fit and really strong. Screws are not needed, just click the top over the bottom of…
A compact and stylish Case to protect you RG351P and some accessories. It comes in two versions, with and without an USB pass through. A snug and secure fit for the 351P, charging cable, fiber cloth , wifi dongle, USB C to A adapter, etc.…
80 tooth 1.5 module spur gear. 35 mm bore diameter with circlip groove to retain a 11 mm wide bearing. Overall thickness of 19 mm. This is a replacement idler gear to drive the power feed / threading gearbox for an Enco 110-1351 lathe.…
I needed a way to stop the power brick for my TP-Link SG-108PE POE switch from being knocked down the back of the cupboard and putting strain on the cable end. This is a small bracket to mount it to a wall/cupboard/etc. The holes are…
A holder/mount for your RG351MP to hang on the Ikea skadis pegboard.
I mounted it to wood using 3x16mm screws.
Made by me in SketchUp 2017. I really like these drawers, but they only come with one set of dividers. I have their other stackable units with the moveable trays and I wanted the best of both worlds. The sides, front, back, and middle…
CTP2 SW3516 SW3518 Aliexpress PD Charger Enclosure. You'll need some superglue for assembly. For better glue adhesion, sand down contacting surfaces.
A stand that I've created for the amazing console RG351P/RG351M The design tilts the console a little bit because I think is a cool design. I also added a text : "Ready Player One" because I love the book and I think that the meaning it's…
Original Side_Logo_Insert was only for 4010 fans. For 3510 is not usable so I remixed it to fit into 3510 side skirt.
This is a beefed-up version of the bracket supplied by Bennett for their V351 model hydraulic pump.
Helicopter: OMP M4 Max with tail servo DS3515T. Simple alignment aid for the OMP DS3515T tail servo. In the manual, the servo arm should be mounted at 115°. This alignment aid helps find the most suitable position for the arm. Procedure:…
For fixing module screw - M2, for fixing panels - M2 or M3
A wall mount for the Anbernic 351v compatible with the Honeycomb Storage Wall.
Hallo, ich brauche einen Wandhalter für einen Switch also eben einen In Fusion erstellt. Er hat 0.2 Toleranz und kann liegend mit Support oder Hochkant gedruckt werden. Er passt eben so auf das Druckbett vom Mk3s+ damit das geht musste…
I'm working on designing a bracket to mount the VXL 3S motor onto the 1/16 E-Revo VXL, and it's required me to model some of the parts to use as references in the design process. I'm posting the model so that anyone can use it as a…
This model is compatible with the lego system.
This was designed with an extended back section to accommodate a USB attachment. The deep back is even more comfortable than the OG for me to hold and balance with a light grasp which puts less strain on the hands. This is very helpful if…
Bandsaw table insert, it fits to bandsaw model Holzkraft HBS351 I have designed this table insert as a spare part to replace the broken original part. The table insert matches the OEM part, the holes were removed. Works fine on my saw!
A holder for the 4WAY sw3518 usb pd and qc power modules that can be found on aliexpress designed to be mounted under or on the side of a desk or other cabinet with double sided mounting tape Has vented sides for passive cooling but this…
Removed mounting Bltouch mounting pad. I am using separate bltouch holder which is mouted to the holes on H2 V2S extruder. See the link below. https://www.printables.com/model/727678-biqu-h2-v2s-bltouch-holder
Update 24/7-18 Needed better cooling and lower mass on the X-axis. Decided to make nozzles that press fit into the opening of the fan, this works a lot better than the previous design. Not as clean looking but that might be revised in the…
Ersatz-Einlegeplatte für den Tisch der Holzkraft HBS 351 IE2 Bandsäge. Druckbar in mehreren Varianten: originalgetreu (Schlitz + Absaugbohrungen) mit schmalerem Sägeschlitz ohne Absaugbohrungen (geschlossen) Passgenau konstruiert, inkl.…
MAGNETIC Remix here! Bracket set for an Anker 351 Power Strip. It has cutouts for the power switch an USB ports. Strip is available here: Amazon Link No special settings needed for printing. You will need to enable supports (I used…
I bought a new ANBERNIC RG P01 Gamepad and decided to make a stand for it. I printed for my 8BitDo Pro2 controller this stand https://makerworld.com/en/models/121982#profileId-131327 thus decided to design something similar. The stand is…
Remixed playfellow_s https://www.printables.com/model/453059-anbernic-rg351p-skadis-mount to include mounting holes for https://www.printables.com/model/152592-honeycomb-storage-wall and also turned and angled it to use less space. Uses…
This is a case for a hardware project on Forum64.de: the Mouse-1351 to PS/2 adapter for the Commodore 64, created by Manfred Moser. More details are available in German on Forum64.de . The adapter should snap gently into the top part of…
Guide Holder for HBS351 Band Saw Storage for Band Saw angular guide, fits HBS351 accessory, keeps the guide around on the side of the machine. I can recommend using PETG for printing this (use upright orientation) and 3M 19mm VHB tape…
This is a bookmark with my Civil Air Patrol squadron's number on it.
Precision Guide for Holzkraft HBS351 Bandsaw This is a guide add-on for the Holzkraft HBS351 Bandsaw to cut thin strips and fine workpieces. It attaches to a 42 mm wide main guide of the saw and lowers down to 3 mm above the saw table.…
a quick and simple model for a replacement bandsaw table insert, specifically made for Holzkraft HBS 433 531 431 533
For assembly you will also need a ready-made bayed DIY-power adapter from China or a print -- Makita 18-21v bayonet holder DC-DC Up module - HW-449 TL494 voltmeter 0,36" DSN-DVM-368 v3.01 22х14х10mm (4.5-30v) of course SW3516/SW3518 + M3…
Measurements taken by hand, a tolerance margin to allow for the creation of a case for the PhilipsXPrintables contest & for concrete modeling supports or enclosures (waiting for a working printer and time!) .Step = BowTie Case for hc3510…
A standoff to allow for a larger batter to fit inside the Ambernic 351M retro handheld.
This is the TS351 FPV Video Transmitter Case by Stanleykuenzle, resized to proper dimension. His original design was exported too small and the case cover was upside down. These are the files scaled in Netfabb to the proper dimension and…
Got a used washing machine for free but it was missing a lid so I made one myself. It will require a bit of force to slide in so I'd recommend a bit more infill. Closes tight and opens smoothly.
a holder for the TS351 transmitter on the dji to eliminate nicely Print Settings Printer Brand: RepRap Printer: prusa i3 Rafts: No Supports: Yes Resolution: 0.25 mm Infill: 10% Category: Hobby
Deckel für Milchshaker als Spritzschutz.
Standard 1/4" pegboard mount holder for Anbernic 351v
This is a hard case for the Anbernic RG351V game console with a magnetic snap-on lid.This is a hard case for the Anbernic RG351V game console with a magnetic snap-on lid. You need 12 magnets with diameter of 5mm and 1mm thickness. Pause…
Diese Untersätze sind stabil, sind schick und passen meiner Meinung nach perfekt zu den Lautsprechern des S351DB. Die Aussparungen für die Gummifüße der LS sind gleichmäßig angeordnet - die am LS selber nicht. Es ist also notwendig…
Thread Board Anker 351 Surge Suppressor Mount, modified version of Daniel Rowland's mount Printed in Elegoo PLA-CF Printed on Elegoo Centauri Carbon Wall Loops - 6 Top Shell Layers - 6 Bottom Shell Layers - 5 Infill - 20% 3D Honeycomd…
Tuleja/dystans do montażu szyby w drzwiach w Ursus 3512 Przygotowana w dwóch wersjach, oddzielnej tuleji prostej oraz ze stożkową podstawą. Jak również w wersji zespolonej. Powstała z braku dostępnej tuleji montażowej. Bushing/spacer for…
Gridfinity bin for the Mitutoyo Deep Throat Digital 1" Micrometer 389-351-30
good for peeling any orange like food
I was not happy with the factory oiling solution for the power feed / threading gearbox on my Enco lathe so I designed this. All oil ports are now in one location and sealed from chips or debris. I doubt anyone will ever need these…
A stand for the BENETECH GM1351 Digital Sound Meter that you can glue on the back cover and a multiboard clip that holds the meter with a magnet. It uses two 10x4 mm magnets.
Anker 351 Surge Protector Power Strip Under Desk Mount with options for flat or tapered screws. Print 2x Mounts Category: Office
I needed a no mar tip for an older model craftsman nail gun. I was able to design this one to fit the curved pressure plate for this nailer. TPU will need to be used, preferably red.
