Liczymy pasujące modele…
This model replicates in every detail the Porsche 356, driven by Jacqueline Evans, of English origin, in the 4th Carrera Panamericana of 1953. All exterior liveries are a memory of Eva Peron.
Wydruk około 7,20 €–8,79 € nettoWstępna wycena jednego wariantu
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Thanks to Arshia who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request…
Wallmount for DeWalt DCS356 Oscillating tool
This is not my design. it's from Tini1 I changed the stearing weel and cut of the weels so you can print this without support. I put the wheels in a separate file ..glue them back on 2:1 printed layer size 0.1 Print instructions Category:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
There are two versions of this model: Porsche_356_Speedster_Body_Shell = Just the body of the 356 Speedster Porsche_356_Speedster_Slot_Car_Body = The body plus internal reinforcements and chassis mounting provisions Approximate scale =…
Great kit....I just scaled it down to 84% to make it close to 1/32. Print all four files (print 4 wheels, or use your own). You will need motor, axles, tires, etc. Update 10 Feb 19: Narrowed the front axle mounts and rear wheel locations…
This model is compatible with the lego system.
Modelled from the broken comb of my HC5356 but according to ebay listings it fits following models: HC5150 HC5350 HC5355 HC5356 HC5550 HC575 Can't say it's a 100% perfect fit but it's more than good enough and is fully functional and much…
This model is compatible with the lego system.
This is the world's fastest 3D printed rubik's cube. You need to buy 6 screws to connect centre parts together with the middle part! You can join us on discord: https://discord.gg/sF96xzHT
Remix to fit Dell Precision 3561. (approx 17mm thickness) Printed with Ender3, PLA, no support, 20% Infill new upload to fit Dell 3520 (approx. 14mm thickness) Please find approximate measurements in the photos for the thickness of your…
Designed this to support the USB-C cable that connects a Dell docking station to the computer. The USB-C port on the laptop is fragile and requires a full motherboard replacement to repair it when damaged. This should reduce/prevent the…
A wall mount to mount the Lego Star Trek Enterprise D 10356 onto a wall. Includes a drill/positioning template Struts are slightly angled towards the wall. To change the layer direction, the model is cut into three parts, to print them on…
This model is compatible with the lego system.
Porsche 356, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Stand for 75356 Executor Super Star Destroyer 2-piece set to display the Lego set. Lower then original stand and displays set broadside at angle of printed Arm piece. Designed for use on a high shelf to show more of the top side then the…
This model is compatible with the lego system.
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
Works well with these visors https://www.printables.com/model/1015898-lego-compatible-93561dat-minifig-visor-hockeyfootb
I remixed the 356 model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
For my shelf, I needed a smaller stand for my LEGO 10356 "Star Trek: U.S.S. Enterprise NCC-1701-D" build. This stand is shorter and angled 10 degrees to the side to avoid only support the one side. A hole is included to slide the plaque…
This model is compatible with the lego system.
This model is compatible with the lego system.
Porsche 356 This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
This model is compatible with the lego system.
This model is compatible with the lego system.
Je l'ai personnellement imprimé sur une Bambulab X1c avec le profil 0.28mm (buse 0.4) Extra Draft en vitesse sport sans surpports en PLA.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a custom-modeled case for upcycling my old Inspiron 15 3567 laptop motherboard into a nicer form factor case to use as a server. Printed in 3 parts Used silicone putty to seal gaps between heatsink and io shield as well as hold…
Modified the holder to fit a Intel FCLGA1356 CPU (XEON E5-2420V2)
This model is compatible with the lego system.
Taller neck with 45 degree pedestal to show off the top of the Executor better, as well as a variant with a 10 degree twist for the ocd folks to make the model sit more parallel.
A simple guide for drilling perfectly placed holes for mounting my HYGROMETER MOUNT in and IKEA 356+ 10.6l bin. Simply hold the mount against the raised waist line on the box as shown in the photograph and drill two 3mm holes for a…
This model is compatible with the lego system.
Negative to use 6x6 cm film in a Vivitar 356 enlarger. Uses 8x3mm magnets to hold it shut and 3mm light seal foam to hold the negative in place. Optional lower plate allows for printing with the film borders (can also be used with 35mm…
This is a remix for the flywheel powered car #3566283. So far thing-i-verse has not let me add the remix info in the right place. https://www.thingiverse.com/thing:3566283 Demo and build video on youtube. https://youtu.be/hgVMQ4UHOGA So I…
Parkside pmrda 20-li b2 side wheel 356377 automatic grass cutter wheel
This model is compatible with the lego system.
Since I mow on a bit of a rough terrain, I guess this clip was lost at some point and I needed a replacement. This seems to exist as a replacement part from Husqvarna and it's cheap, but at the time when I needed it it wasn't in stock…
New handle freezer for Gorenje HTS 1356. Printer: MK3S+ Material: PC Blend Prusament Support: Yes I tried PETG, but it didn't hold up to the cold temperatures in the fridge. Nové madlo dvířek od mrazáku pro ledničku Gorenje. Tisk…
Eine Nachbildung des Schiebeschalters aus einer Oberfräse von HolzHer 2355/2356
Could be used with other midi scale models
Porsche 356 Speedster 1954-1958 Racing
Any time I needed to remove the hazard switch on my 2002, I would the end up damaging the plastic nut since I was using whatever pliers that I could make fit. I got tired of scratching it up so I decided to whip this up to save myself…
uses m5x12 bolts not perfect but it works
Display model of the Porsche 356. Unfortunately, the side mirrors do not print very well. It’s best to remove them afterwards. But you might also get lucky. :) Printing instructions: Supports required 10% infill is sufficient Best printed…
A display for the WalMart exclusive Porsche 356.
Lensboard for the Vivitar VI enlarger and 39mm lenses. You'll need a retaining ring, and depending on the printing material, you might need to spray flat black paint once or twice to avoid translucency. 4-5 top and bottom layers in black…
Enclosure for RC3563 Battery Tester / Milliohmmeter Available, among others, on AliExpress as “RC3563 Battery Voltage Internal Resistance Tester” or “RC3563 200Ω 100V Handheld Portable Battery Internal Resistance Voltage Tester.” The…
This model is compatible with the lego system.
Made for Solace 2023 Christmas holiday cheer :) https://solace.com/products/event-broker/appliance/ Desktop cable management box for hiding my Targus DOCK221 and WD MyBook HDD. F3D files included!
NUMERO DE PROYECTO: 33564. AUTORES: Fabio Martinez Mostajo - Nicolas Emilio Montero Gutierrez. ASESOR: Luis Augusto Ortega Zeballos. ESCUELA: La Salle Tarija Particular. CATEGORIA: Ciencia Aplicada.
I don't have a server rack so printed spacers that compression fit onto the switch to keep it from touching other networking equipment. Dimensions - 49.3mm (H, the inner height of the switch is 43.3mm) x 18mm (D, how far it holds the…
I wanted to mount my sound measuring device to a wall outside. Now this thing isn't waterproof (yet). Also because I am afraid of overheating it. But it is better than nothing. So it works pretty well while it is not pouring rain. Hope…
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
ORGANIZZATORE GT356 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Wall and ceiling mounts for the satellite speakers for the Philips HTS3565D/37 DVD Home Theater System. Currently in beta, the ceiling mounts haven't been tested yet and there is no center speaker mount yet. Ceiling mounts are designed to…
remixed for AA und AAA Batteryholder
A lens board for the Vivitar 356 enlarger with a 2.5 inch extension to allow a 105mm lens to be brought into focus. Print in black filament, preferably ABS/PETG (it gets warm during long print sessions and PLA might deform). Threaded for…
THE LATCH ON THE VACUUM CLEANER REDMOND RV-UR356, RV-UR357, RV-UR359, RV-UR381
Ich habe das Modell mit KI entworfen und dies durch Details etwas verbessert. Damit es auch sehr detailliert gedruckt werden kann. Ich habe beim Ausdruck ein Infill von 15% und eine Wandung von 4 Layer wie auch von unten und oben…
Leeson 003565.01 Electric Motor Replacement Cooling Fan Because of the high temperatures on an electric motor, print this in part Nylon or ABS. (I would suggest nylon with CF for strength and durability) 0.2mm layer height. I used 80%…
Every wanted to have your Catalyst 3560 to stand vertically on your desk? Well now you can with this simple stand. Print one and use a bolt to secure it to the device.
These two models covers the console and SFP ports on switch models C3560CX and C2960CX. This reduces the change that a endsuer uses the wrong port on the switch. The 3D print in the picture is printed with Bambu PETG gray + the first…
EN: To identify a water pump. DE: Zur Kennzeichnung einer Wasserpumpe.
Nachdem ich mir meiner vorherigen Version nicht ganz getroffen habe. Ist diese Version erstellt. Es ist ebenfalls alles im Maßstab 1:43 gehalten. Wer will kann sich ja einen Hacken bzw. Öse montieren und später als Schlüsselanhänger nutzen.
nahrada hrenenu pro zastrihovac v rozmezi 5-20mm
This is a bit of a specialized piece but you never know. I made this to work with a 1U shelf I had. I wanted something to span the gap between my Cisco WS-C3560CX-12PD-S switch and the other edge of the rack shelf. There are 3 spots for…
Two models: one is handle-up and includes room for a pack of blades.
My 3560 didn't fit inside of the rack I printed - https://www.printables.com/model/1225275-modular-10-server-rack-mod10 So I made a mount that fits below and bolts to the rack with a slot to allow for various fitments/alignments.…
Ich habe mir meinen eigenen Porsche 356 entworfen. Mit zwei unterschiedlichen Felgen Design und zwei unterschiedlich Body. Bitte auf V1 und V2 achten. Die Reifen werden wieder in TPU gedruckt. Damit sie schön stramm auf den Felgen sitzen.…
Steering column holder for 356 Replica that are produced in England by Gary
Parametric 8.2cm tall object with rounded circular geometry and a matrix pattern. Engineered for precise 3D printing.
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
This model is compatible with the lego system.
Every wanted to have your Catalyst 3560 to stand vertically on your desk? Well now you can with this simple stand. Print one and use a bolt to secure it to the device.
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
