430 modeli
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
4x4x3cm SD card box with hinge
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
Meine Frau ist überglücklich damit und hat 3x die Markisenbreite als Wäscheleine. Jeder kann sich natürlich seine Breite und Dicke des Halters nach seinen Wünschen erstellen, aber ich habe nun mal die 7mm Kederleiste und dort passt er…
Support de terminal de paiement SumUp Solo à insérer dans un panier de collecte en osier.
Model Fits boxes up to 23cm x 13cm x 6.5cm, uses 4x 8G screws to mount. Make sure to leave enough room above to insert and remove the boxes when mounting on a wall. Parts needed 4 x 8G Screws Installation (1) Use a spirit level to ensure…
Traffic light for the model (road width should be 13cm) The signal has three lights (green, orange and red) and floats on the road. It is easy to install with 3 screws. In my mockup, it is controlled by arduino uno r3. dimensions: 9cm x…
A small 3 cm hook for screwing into a walk and hanging things off.
Hi As I could not find any box that would fit my needs I had to do it my self :-) I printed PETG but you can do PLA or anything that makes sense to you. Top lid has bigger cutouts in order to easily open Lid in certain “angle” without…
Základna pro chlazení motoru WPL B24 370 upgrade, zapuštěna matice M3 4x v průběhu tisku
I made this a year ago, and I let my science teacher keep the model, so I do not have the weight or time taken for each model (i forgot how long each piece took, but the whole thing took about 5-6 hours to design, and 8-9 to print so all…
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…
The foot is to print with the mouthpiece rim upwards, to avoid a sharp edge against the lips. Also nice to have for the acetone bath. It breaks away. Fully functional mouthpiece! Here is a stupidly deep version of it.
Thingiverse https://www.thingiverse.com/thing:5577372 Remixed from https://www.thingiverse.com/thing:4808386. The original model worked, but the corners made it uncomfortable for me to use. I tightened up the fitment to the mag, added a…
This is a 3D printable angled holder for Nintendo Switch 2's Joy-Con 2 controllers. Designed to hold your controllers at an ergonomic angle to enhance comfort during long gaming sessions. Magnets Required: This holder uses 20x10x5mm…
Fishing lure / mold 13cm twister with belly 8mm eye cutout screw hole 6mm Enjoy
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
Hi Hunter, you asked if I had a T-51 suit and I do, unfortunately it needs a lot of work for which is a little out of my league and time wise. Hopefully you or some one else will take the time to improve on it and reupload here for all to…
easy printable 13cm worm fishing mold / form Enjoy
Xiaomi Redmi 13C Phone Case: The case is slightly taller than the phone (+0.7 mm) and will also cover the height of the phone with protective glass (e.g. 0.4mm Gorilla glass, etc). Tolerances for model are 0.2 mm (offset from phone). The…
A screw‑in beach holder designed for standard 33cl cans . The integrated conical screw anchors directly into the sand, keeping your drink stable, elevated, and free from sand. Perfect for beach days , camping , festivals , and outdoor…
Speaker Adapter Car VolksWagen Golf mk4 4 IV 13cm
Description The Titan 3C model is a highly detailed 1:200 scale reproduction of the US Army rocket used between the 60s and 80s. . The model consists of several pieces printed separately, which are easy to print and assemble. The finished…
Da ich nix vergleichbares gefunden habe, habe ich selber einen Rahmen erstellt. Der Rahmen ist schlicht und zeitlos. Bilder können einfach eingelegt werden. Der Clip kann mit zB Tesa Powerstrips an der Wand befestigt und der Rahmen drauf…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print the model as oriented in the STL. You will need 2x M3 x 6mm screws to attach the mount to the computer.
English: This remix is made for the SV06. There is space for the printer as well as a 4cm thick concrete/stone plate and a 1cm thick rubber dampener. And there is 3cm space still left to the top. All parts need to be printed out of PETG…
This is a functional trumpt mouthpiece. model is based off a Bach 3C pouthpiece.
[REMIX] Bird Door Stepper , now with eyes! Perfect to hold the door, small and cute! XYZ: 45mm x 22,3mm x 31,7mm Good on PLA. No support needed. Fast: 30-less minutes.
I use this in my Beseler 23C series II to print negatives from my Fuji GW690. I opted to design the carrier as two separate parts with a few interlocking registration features rather than trying to integrate a hinge as the metal…
This is a cup holder insert for the Dacia Duster (which I believe is sold as Renault Duster in some markets?) to let you place a 33cl can without risking it falling. Since it's a car accessory, I'd recommend printing it in PETG or some…
Updated for better fit.
For growing smaller plants like herbs, arugula, basil,… I use my designed foldable net cups which can be found here: https://www.printables.com/de/model/770952-hydroponic-rockwool-netcup-flat-foldable
Simple bolt on battery holder with velcro strap pass-thru Category: R/C Vehicles
Allows you to extend the Ikea Metod plinth 3cm outwards. Helps to cover flooring that might be cut short, etc. If you found this you probably know what it is and what it's for! Will clip into the clips that came with the plinth.
An adjustable butt-stock for 13ci PCP air bottles for magfed paintball markers. This has a tightening position. You will need to adapt the tightening clasp and provide your own nut/bolt to your requirement.
Perimeters: 3mm height, 15cm wide, 20cm height optimal print: no auto color change, manual color change to 2,20mm bottom half: TPU or Prusa Flex top half: any solid non flexible (can also be printed with flexible, depends on preference)…
Created a can stein to hold 33 and 50cl cans. Both the wide type and the narrow type they started using a few years back. Only thing in this upload not created by me is the viking logo. dwarf on the lid of the copper colored steins is…
This is a remix of Sailor Moon Disguise Pen by C4robotics cut in 2 parts to easy print modified height Category: Props
Box - outer max dimension 190.2x187.89x34mm - inner max dimension 180x160x30mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls…
This fits Pyrex containers with the red rectangular lid. I used TPU. Might try Nylon
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Ich habe den Baum mit PLA in mattem Hellbraun gedruckt, wodurch er aussieht, als wäre er aus Holz gearbeitet. Der Baum ist 13 cm hoch und besteht aus 6 Teilen und einem Fuß. Nach dem Druck müssen die Teile noch zusammengeklebt werden. In…
I broke this piece of the warning triangle compartment in the rear door of my Passat 3C (year 2009) by closing it too hard. I have designed this just like the original and after 3 years I have not broken it again. It's true that I've not…
Print with 100% infill to have it stable on desk. I noticed there are a million versions of this out there that might be slightly bigger/smaller. I recommend slicing the model and printing a segment to see if it fits.
A simple clean looking Bracket for a shelf 13x13cm in size, Pretty stable with 15% infill. // Ein simpler Regal Winkel für Regale, 13x13cm groß, Ziemlich stabil mit nur 15% Infill.
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
This model is compatible with the lego system.
The "big brother" of the original E3CNC ! [Currently untested] Still based around the Ender 3 Pro (and its clones) but with a little more heft to it. This version is just a side project I did to use up some spare 12mm rods i had laying…
Tested with 3 different EU power strips. The height of both strips is 40.5 mm. They should fit snugly and click into place clearly. I used the clips to screw strips under my desk. (Glue also works) I used the end piece to mount a strip…
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
A bigger and cuttet version of the original from jet_maker.
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
I was looking for rackmount brackets / ears for an old HPE Switch which has a 30 x 30 pattern for M4 screws and all I could find were models with 25 mm distance. After printing a first draft, turns out 29 mm fits even better so I included…
I wanted to be able to use the original endstops + their wiring in my E3CNC so I designed these custom belt clamps. They are a directly drop in replacement to the original belt clamps, and you can screw in the original end stops. You will…
I needed a few hat hooks for a space exactly hat sized in my closet. The inside of the hook is slightly under 3cm, meaning that it has a bit of a friction fit to hold it right up. I printed in PLA at .25 draft on a Prusa mini.
A rugged stackable gridfinity box. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at 0.24 leyer height. You can…
Wand- oder Decken Halterung Kompatibel mit Samsung "The Freestyle" 2nd Gen. Projektor LFF3C (2023). Sollte der Freestyle Projektor noch gedreht werden nach dem Befestigen, dann die mittlere Bohrung verwenden, dann ist man flexibler.…
Boom is 3D printed to avoid mistakes with drilling and is divided to 2 parts. Use super glue to and joint.stl to fix connection. Elements are from 3.2 mm al welding rods. 25mm PVC tube is used as support. Dimensions:…
diseñada para ender 3pro. esta dividida en tres partes. min 3 capas, 8% de relleno
2 versions. One with gaps and the other without. Gaps will make it easier to poke, but are harder to clean.
Un tubo tapado de un lado, medidas, altura: 6cm, 3cm, y el grosor de las paredes y de la tapa no removible, es de 1cm
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Výška celého stojanu je 23 cm Celý stojan jsem tisknul s tryskou 0.6 až na logo, to bylo vytištěno…
A 35mm Remix of @bnn_229452 's 6x9 Negative Carrier for a Beseler 23C Enlarger
The case is based on my parametric “ Rugged Box ” and is resized to fit the original foam insert of the TOOLTOP ET693C Super IR Thermal Camera (which works great btw.). I just sanded down the edges a bit to fit better into the case and…
reduce elements, enlarge button Category: 3D Printing
A rugged stackable gridfinity box. This one has a smooth lid. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at…
Protection cover for my TOOLTOP ET693C Super IR Thermal Camera . It's highly recommended to use a filament which is a little flexible and has very good layer adhesion. PCTG (not PETG) works very well, but PETG may is fine too, as PCTG is…
The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted…
uses one of the Ender3 limit switches as a tool-height sensor, utilizing the free space in front of the machine frame
Bahtinov Mask for Canon EF 100-400mm on ET-83C
A quick and dirty remix of @bnn_229452 's 6x9 negative carrier for a Beseler 23cii Enlarger
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Radxa Rock 3C case Parts: Radxa Rock 3C SBC Hardware: 4 - M2.5 ~4mm heat set inserts 4 - M2.5 ~4mm screws 7 - 5x3mm magnets Print Notes: PETG / ABS / ASA / PLA
The dishwasher trolley came off the rails with the original wheels : With this wheel it stays in place. Original wheel in 2 parts : this wheel in one part, print in place. Print with PETG, layer height 0.2mm Dishwasher Whirlpool WRIC 3C26
Simple mask to use for prints. Better with higher infill to make it a bit heavy. Print five "doors" to use it as test strip maker, glue handle on top. How I Designed This…
Made a 6x33cl Fanta slim can crate. It's made for 5 color printing. But this setup i made it in 4 colors. It's an easy change, all colors are marked and it's the light green color on the leaf that i took the same color as the rest. Hope…
UPDATES VERSION 2 (Tested) - Returns to standard tool mounting to maintain compatibility of the original designs tool heads and bearing plates. - Added a hole for allowing the X Axis rod extend past the Gantry. - QOL improvements. -…
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
My WM-703C didn't come with a battery cover for the gumstick battery compartment, so I modeled a new one for it. A 0.2mm nozzle is kind of mandatory, unless you want to do a lot of post processing. My covers fit without any sanding,…
I made this to prevent the supports from falling.
Descubrí un soporte 3D para latas con asa que facilita el manejo y estabilidad al beber. Sin embargo, tenia dos problemas: 1 Era para latas estadounidenses de 12oz , por lo que hice un remix ajustando las dimensiones a 33cl usando una…
Useful design by biri3d https://www.thingiverse.com/thing:4311802/files Haven't yet testet the 33cl handle. The 50cl handle fits on snuggly, but the hand might be too close to the can for some. Printed in PLA.
Simple Magfed paintball 13ci Tank stock
This is a sleek can holder designed specifically for slim 33cl beverage cans. The design features a sturdyish handle and a snug fit for your favorite drinks. Perfect for outdoor enthusiasts or anyone who wants to enjoy their cold…
This is a drop-in replacement for the original X-axis plate. It aims to fix the biggest issue I had with the original one: lack of rigidity in the vertical plane. I was able to rock it back and forth quite a bit, and that was a problem…
Remake of pintokitkat's battery holder. This remix holds a Turnigy 2.2 3C battery. I am using it on my Hobby king Q450 quad-copter. Category: R/C Vehicles
This mount fits my SV3C PTZ 5MP camera. But I suspect it would fit several other models as well, as they all look very similar. I am including the OpenSCAD files, though. So, you can always make adjustments, if you camera has a different…
Awesome 160% scale Chappie Dummy 13 Modle. Used Prusa Sliser for Prints + Creality Ender 3 with Sprite Hot end upgrade. Body Frame was made using Wanhu White PLA. Armour was made using SA Grey PLA. Total Hight of Model is 23cm (ears…
I need a cap for the 3cc cup of my NEO for IWATA. It fit perfectly in my cup, hope it'll be the same for you ! I added a second version with little teeth above the cap for a better grip (i use the non-teeth version). Category: Art Tools
This model is compatible with the lego system.
This is a lens hood for the Canon EF 100-400mm f/4.5-5.6 L IS USM lens. I bought this lens used and it did not come with it so I made one. It is not a 1 to 1 of the original since I never had one to measure. Printed at 0.28mm, I recommend…
![Nintendo Switch 2 Joy-Con 2 Ergonomic Grip [v1.3c March 05 Update]](https://media.printables.com/media/prints/4b7b552d-4c32-42a9-a2fc-27f7983368f5/images/10801860_1b8c1673-aade-4e65-8542-53cdf24acab9_2e3fcda5-3eaa-40b1-b4e4-d4319db0bad5/img_1898.jpg)
