1996 modeli
Model description The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
Model description The Boeing 747-100, which was launched in 1966, was the original variant of the Boeing 747. Compared to later versions of the 747, the early Boeing 747-100s only had three windows per side on its upper deck. However,…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple bumper to protect the watch. //updated dimensions 19.02.2021 Print instructions Face side down, no supports. Works from 0.05 to 0.3
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
Samsung Galaxy Watch 4 - Body Case - 44 mm
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? This 3D printable handwheel upgrade is here to revolutionize your sewing experience! Problem: The original handwheel on the Singer…
Wydruk około 7,18 €–8,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Scaling is not advised , but if you do, scale the characters also. I added a BLANK PIN so get to work on the REMIXES! All the characters are individual, so you can print any phrase. Print Grid Board in 1 or 2 colors with easy filament…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena jednego wariantu
I love Vintage Russian Lenses especially the Helios 44-2 58mm f/2.0 . It's a dirt cheap prime lens with an amazing swirly vintage look. A couple of years ago I made some Aperture Inlays, Yes this doesn't require to remove the aperture of…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is a remix of the Samsung Galaxy Watch 4 charging stand by Maxime, which is a beautiful design but it is difficult to remove the charger once it is press fitted. Cropping off the top makes removal much easier; however, it loses the…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LPG Filler Cap for a hatch with a hole diameter of 44 mm. I can make a model for any size. Write in the comments. Thread M10 x 1.5. After printing, you can walk the die along the thread.
Wydruk około 0,81 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sturdy case for CR2032/CR2025/LIR2032/LR44/SR44 coin batteries with screw attached lid
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…
Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu
An assault rifle seen used by Gouf Custom in Zeonic Front video game. Supposedly based on the new MMP-80 Zaku machine gun, this weapon features a more rigid buttstock, scope mount, heavy-duty barrel. In turn it has a slower rate of fire…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Colt may claim that their Peacemaker is how the west was one, but that's a bit of a stretch. The truth is that repeatable firing weapons like the revolver were the real MVP. Before them we had black powder rifles and pistols the fired…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Printed on Elegoo Neptune 3 Plus
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
A configurable battery holder which can either be created as a single piece or as multiple pieces that fit in each other as a puzzle. To configure use OpenScad , you just open the .scad file and use the customizer to generate your…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Hey team, I've put together an objective and ocular ‘flip up style' lens cover to suit the Leupold VX-5HD. Leupold themselves make absolutely stunning lens covers ( example ), which are beautifully machined out of aluminium and fit their…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Robinson R44 Raven II Helicopter Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Design Intent This Hallowtech II style bottom bracket tool is designed to fit a Praxis M24/PF30 Bottom Bracket , which has a 44mm outer external diameter. This Praxis bottom bracket has an expansion ring to prevent it from moving…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Human ankle with complex fracture, AO classifiacation 44B3.2 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
LR44 to LR41 battery adapter for my electronic caliper.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Gridfinity 2x2 Bottle Stand 44mm and 22mm e.g. for eliquid bottle.
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
This stand provides a convenient and elegant docking station for your Apple Watch. You can use the hole for the cable and the watch itself.
Wydruk około 2,25 €–2,76 € nettoWstępna wycena jednego wariantu
Magnetic rifle scope with fron 50 mm and rear 44 mm diameter. You need 12 pices of gagnet 6x2mm (Aliexpress) - https://www.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.15.8b511802zbc0Fz Scope is Meopta…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet. I am using a stacked Platsa cabinet which means that there is 44mm of wood between the two parts instead of 22mm. This part replaces Kalle's bottom…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
Kitchen Stove Knob model is based on @Weedjesus_350271 CAD file and modified for W10844787. I printed it in PLA in Prusament Galaxy Gray
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
That's a simple mount for my ASIAir Plus fit for tripod with 44mm diameter legs. It fits a bit tight, you can hear crackling sound when stretched, but nothing broke during few tests. Mount with device attached does not slide down on steel…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
This is a bumper to go over the screen, ideally to prevent a screen protector film from pealing up during use. Will work for only a Apple iWatch which is 44mm (iWatch 4 and earlier?)
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modest desk stand for a Wacom Intuos 4 (model PTK-440) pen tablet. It allows you to store the tablet in a vertical position, saving desk space and making it less likely to collect dust (or cat hairs 😀) The file size is rather large,…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
A wrench for fridge water filters Bosch Ultra Clarity 644845, REPLFLTR10, 740560, AP3962558; Haier 0060820860, RF-2800-13, RF-2800-15, Rangemaster DXD 90170; Bypass Cartridge. Print instructions Print using at least 15% infill in PLA,…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
This replaces the obsolete 1.35V mercury batteries with either one 3V CR-1/3N or two 1.5V LR44 or SR44 batteries. Note: This camera's meter was designed to run off two 1.35V batteries (2.7V in series). Using one 3V or two 1.5V batteries…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Prasklý kontakt na nabíjecí stanici. Reklamace neuznaná tak jsem vytvořil vlastní a dávám kdyby měl někdo stéjný problém.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
Model description The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in…
Model description The Airbus A220 (also known as the Bombardier C Series) represents the fusion of performance and technology. The A220’s advanced aerodynamics combined with the Pratt & Whitney PurePower PW1500G geared turbofan engines…
Model description The Boeing 747-8 is a wide-body airliner developed by Boeing Commercial Airplanes, and the largest variant of the 747. After introducing the 747-400, Boeing considered larger 747 versions as alternatives to the Airbus…
Barrel Assembly and the Flash Suppressor will require sanding where they meet. Finished photos are of my print @ 0.2 layer height, need for rafts and supports dependent on each piece. I printed all parts in PLA+ with a 10mm raft., 40…
I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts. Lamp…
Gundam EZ 8 - 8 th ms team 1/144 scale (1:144) this gundam model is from psp game gundam vs gundam from the anime gundam 8th ms team, the later model that repaired (dont have classic gundam head) is in scale 1/144 like all gunpla but not…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Model description The McDonnell Douglas MD-11 is a three-engine medium to long-range wide body airliner, with two engines mounted under wing and a third engine at the base of the vertical stabilizer. It is an evolution of the DC-10,…
I'm sharing modified 1:144 scale models of SpaceX Super heavy - Starship I recommend printing in PLA with a layer height of 0.2mm and organic supports for parts where needed. The model is intended for more experienced printers. Print the…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model is compatible with the lego system.
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…
This model is compatible with the lego system.
3D scan of the Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11 cm, the figurine – made of oolithic limestone –…
This model is compatible with the lego system.
Combined 2 different DL-44 files found here on Thingiverse to try and get the proportions a little more to scale. See "Remixed Files" section for source files. Since this was made by combining two different source files, the flash…
This model is compatible with the lego system.
Battery boxes for small lithium batteries. Features print in place hinges and lock. Print instructions Print with PLA, 0.2mm layer recommended. Print both parts at once, hinges are printed in place. Like this model? Check out my other…
This reduction gearbox is a great way to demonstrate to students how gear ratios compound (it's also just fun to have as a desk toy). Each compound gear has a 32-tooth and 8-tooth gear stacked resulting in a 4:1 gear ratio. With 9 gears…
Watch band with speed holes; designed to fit 44mm Apple Watch I printed this in 95A TPU and it worked pretty well. I tried printing the sizing peg out of various materials but the TPU held well enough and I didn't have to make it in…
Hey Timothy, Hows this for a weapon, Sorry a bit rushed, so let me know how you get on. Will post the badge next, Cheers Jace PS I read somewhere the gun was about th30cms long so do check the sizing suits your needs ; )
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ LR44 Battery holder for the Gridfinity System. Holds 8 cells without them shorting. Add to any…
I was approached with a request to design a battery adapter that would let someone use 4 "LR44" batteries in place of the semi-available "4LR44" battery, because evidently the 4LR44 is hard to get in some places. I don't normally do…
Can be used for sizing comparisons, case designs, etc.
This slick display stand for Han Solo Blaster DL-44 is designed to be as least visible as possible, in order to emphasize the displayed object, rather then itself. Tailored specially for https://www.thingiverse.com/thing:1915956 , but…
DL-44 Han Solo's Blaster (UPDATED 1/17/2024) the .ojb file is not to scale. Use this if you plan on scaling gun for a child or such. The .3mf file has been updated so it is to movie scale. and the sliced file with organic supports is also…
This model is compatible with the lego system.
This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 11.55mm cell_thickness = 5.5mm See the original model under “This remix is based on” for Fusion360 source file. If you don't…
This model is compatible with the lego system.
This model is compatible with the lego system.
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
This model is compatible with the lego system.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The model is scaled for costume size…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
The original stand was wobbly because it was too thin and the scope shifts the center of gravity of the gun. I redesigned the stand from scratch to support the weight better and use less material. I also redesigned the tag to allow for…
Easy and fast to print. Just remove the rear glas element of the Helios 44-2 and place the apaturein it. You also can add some fishing line to it and color it blue for cinematic lensflares. Print Settings Rafts: No Supports: No…
Simple charging stand for Apple Watch series 5, 44 mm
This model is compatible with the lego system.
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…
This model is compatible with the lego system.
First and foremost, I want to acknowledge PortedtoReality for their outstanding work on the Han Solo Blaster DL-44, to whom all credit is due. My experience of crafting this blaster has been truly enjoyable. Over the course of a week, I…
This is a remix of Henrik Bjorkman's excellent "simplified tiger tank" ( http://www.thingiverse.com/thing:90265 ), reduced in scale and adjusted here and there for use in the Memoir '44 board game. As I think Henrik does, I print these…
Nowadays we imagine rail cranes in construction work only or in case of rail incident, but in earlier days of railways such cranes were quite commonly used for normal cargo handling. Yard cranes able to load/unload road rail containers,…
Organize your whole workshop with with functionality in mind with Gridfinity! Zack Freedman originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ This is a battery holder/storage that holds 10 LR44 battery cells. This…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker 44 Gallon Drum Desk Top Trash Can. Can be resized in your…
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 2x10 LR44 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
UPDATE: Classic model has been tested to fit by @GrzegorzPora_1290597 , thank you! UPDATE: I adjusted the 40mm model, and now it has been confirmed to fit by @3dprinttech_4130516 , thank you! I designed this charging dock specifically for…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
Minimalist and small for easy display Print Settings: 0.15mm Layer Height 10% Infill No Supports Dimensions: 90mm L x 60mm W x 80mm H
This model is compatible with the lego system.
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
I designed this replacement gear to fix an old Philips D6340 cassette tape recorder, but in the process I've learned that this is a common issue also in some more famous products as Magnavox D8443 or Philips D8444. Probably also other…
Originally designed for a diorama I am intending to build (on pause for shelter-in-place) for/with one of my students, this is a 1/144 mobile worker to display alongside an HG Gundam Barbatos. The goal was to balance detail, anime…
This is a 1:144 scale model of SpaceX's Super Heavy Booster, the first stage of the Starship rocket! It measures at 62.5mm in diameter and the booster + Hot Stage Ring is ~ 490mm tall! This is “Block 2” of the booster! Ship can be found…
Resized for 44 pin dual USB C devkit board
Watch the full design and printing process here: When I encountered the Pokémon promo card with Charmander pressing its face against the window, I knew I had to bring it to life as a 3D model. I initially generated the model using…
This is a blaster from the new Star Wars movies with Finn and Poe Dameron. They both used a new Rebel-Blaster like this. It was designed by me in Onshape and has many separate parts. The base part is available as one part or as a splitted…
The yashica 44 is an old twin lens reflex camera designed for 127 film. This film is like the widely available 120 film, but with a 4cm wide strip of film instead of 6cm. This makes it challenging to use today, as film is hard to find…
As my trailer is parked outside I searched for a cap to protect the electric plug against humidity, dust. I found some nice models here, but at the end I decided to create my own. Fusion360 files included, so you can easily modify it, if…
![Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344](https://media.printables.com/media/prints/427956/images/4197916_10ccaadf-5adf-459c-923a-defcc0d5886b/img_20230702_152357.jpg)
