Liczymy pasujące modele…
I redesigned the original model in order to better fit to cz 457 lrp Please print with many walls and durable rolls
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My take on a single shot adapter for the 22LR CZ457. The main difference between this and other single shot adapter designs is the integrated spring on the front that lifts the bullet such that it enters the barrel chamber without…
drapeau de mise en sécurité pour CZ455- 457 0.20 pla support seulement sur le plateau
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…
Empty chamber / magazine flag for CZ 455, CZ 457 rifles in 22LR. LH versions including.
I printed from ABS. Place it on the reverse side to print a stronger pin than in the photo. Use support! After printing, stick anti-slip material on the back and top for better performance.
CZ 515 - 22LR 10 round magazine Fully DIY 10 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
CZ 457 Bore Cleaning Guide With Bolt Catch.
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
CZ 512 22LR - 15 round magazine Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
This is a CZ 457 22LR Rifle Empty Chamber Indicator (ECI) Magazine used with a MDT ACC chassis. Filament: Prusa Orange PETG
Plastic follower for CZ 452/455/457 metal 10rnd magazine reduces friction and rattling. Fits magazine on the picture. I don't know if it will fit other 5 or 10 round magazines. Print on the side with supports.
I wanted a thicker bolt knob for my cz 457, so I made one, It functions well, and should thread on just fine, no brass threaded insert, just threads onto the plastic. Add fuzzy skin for a good texture. Print Settings Printer Brand:…
(((-- Si vous appréciez ce partage, pensez à cliquer sur "j'aime". Ça m'aide à proposer du contenu --))) Ce récupérateur de douilles fonctionne avec quatre aimants 5x4mm que vous devez coller à l'intérieur des emplacements prévus. Il…
Close your eyes, rest your head comfortably on the stock in a shooting position and open your eyes. What do you see? Are you looking directly into the scope or from below? When properly adjusted the cheek riser you should be looking…
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
Récupérateur de douilles pour CZ457 LRP 2 versions, une à "cliper" dessus, et une avec ressort. Pour la version à ressort, il vous faut, donc, un petit ressort, et coller ( ou visser M2 ) les pièces, Casings recuperator for CZ 457 LRP 2…
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
Many CZ 457 rifle owners like me have problems feeding ammunition with 10-round magazines, both plastic and metal. This slide modifies the inclination of the ammunition bringing the problem to zero. Print it lying on its side with brim…
I made this tool after getting a used 2018 Sierra Denali that must've been owned by a hamfisted degenerate; all of the cigarette lighter covers had been ripped off and broken. Finding this tool (Dorman 56457) was needed to remove the…
Note 12/13/2023 On request, added EZ fit lid versions that should require little or no edge dressing to fit. Tested one. Anyone using the EZ lid versions are welcome to leave comments so I may make further changes. 12/11/2023: By request,…
Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn…
Length of pull stock extensions for CZ 457 Synthetic stock. ¼", ½" and 1" versions available. Longer screw for mounting butt plate with use of extensions is needed. Original screw is 25 mm long so for ¼" extension you gonna need 30 or 35…
LA101, CZ457 Single Shot Mag I use for Benchrest shooting with double feed ramps to lift and align bullet into chamber minimising contact to increase accuracy. Taken from my M14 adaptor grafted onto modified CZ mag to fit the LA101 or CZ.…
Cut in half for best results and strength
This is a belt pouch, or molle adaptable, for CZ .22LR rifle 10 round magazines. It is also useful as a small tool or knife holder. The V3 file is specifically for TPU. It has a thickened pouch lip to stiffen a bit. I lean towards the TPU…
A Sanding Block that use 75 x 457 mm abrasive belt (3 X 18 inches) Print the following 5 parts : Body-A, Body-B, Lever, Pin, Spacer+0 This Sanding Block will accommodate most 75 x 457 mm abrasive belt (3 X 18 inches). You may need to…
Simple part to put under your CZ 457 LRP stock, to allow it to sit flat on a front benchrest support. After printing, tap the base lateral holes at M5 size. Then you can put allen screws, with pointed heads, to hold this part in place,…
This is the third hand mixer that breaks the same way. We decided to repair, but did not find any replacement part. Only in an Asian store for a well known German brand, so we decided to clone it, although some parts were fused.…
This model is compatible with the lego system.
CZ 515 22LR - 15 round magazine - Waffle Mag! Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus…
This model is compatible with the lego system.
The goal was to create a screw-free cheek riser, designed for benchrest-style shooting. The press-fit design may not hold up for more tactical oriented shooting. The main insert was printed in ASA and fitted with M3 threaded inserts. A…
Replacement for that all to easy to lose magazine spring and pin for your CZ 457 455 Magazine.
This model is compatible with the lego system.
This box for TS457 Battery tester , have place for charger board, 18650 battery and connector.
CZ 457 LRP stock bottom , to put on the picatinny rail to put the rifle on a sand bag. Bas de crosse pour CZ 457 LRP pour pouvoir caler la crosse dans un sac de tir.
CZ 457 magwell insert for 22lr
Kulička natahovací páky CZ 457, Bolt knob CZ457
Strap a spare magazine onto your rifle fore-end. On the pictures, I have a different hole pattern, but I made an M-LOK version as well. BOM: -Elastic strap 40mm wide (1.5 inches should also work) -2 M-LOK screws and nut (the screws should…
Robust wall mount designed to hold Makita DF457D cordless drill. It's a bit overkill, but I wanted something that is hard to break and witohut risk of easily knocking drill out of holder. Rough 3D scan was used to copy the shape of the…
This model is compatible with the lego system.
Just playing around with designing various bolt knobs for my CZ457 rifle. I have confirmed the threads work but for the initial start of the threading make sure you are lined up well and it goes on straight. I printed mine using carbon…
This is empty chamber indicator for CZ457 action and a cold bore cap for the barrel. Parts: (2) 6 x 3 mm round magnets for ECI (3) 6 x 2 mm round magnets for CAP (1) CAP (1) ECI
Simple inlay to help mount arca swiss rail on bottom side of CZ 457 Synthetic stock. Printed with 2 Parameters and 15% and seems to hold up fine. 2 Different lengths to slide right into the barrel channels. Used 5mm button head bolts for…
To attach this stock start by compressing the bottom part of the rubber stock and slide it over the top. Stays in position well without any glue. My designs are released under a public domain license: You can do whatever you want with…
These are simple plates to block off the area where the mirrors were if you remove them for track days or bar end mirrors. The countersunk version is meant to be used with 6mm countersunk fasteners. The buttonhead version is meant to be…
This is a magnetic empty chamber indicator (ECI) for a CZ457 action. Has a hole to add a banner flag as required. Parts: (2) 6 x 3 mm round magnets (1) ECI Insert
About A personalized remix for easy component searching, extra ports for oversized batteries, and easier assembly. Components All the components I use for the products are purchased from the links below (or can be replaced with similar…
Plug for the gap around the bolt handle. For MDT Field Stock for CZ 457 rimfire rifle action. No supports. Secured in stock by the shape of the part. After installing the action in the stock the plug cannot fall off. Enjoy.
This is a sanding block for sanding belts 457mm x 75mm. The print consists of two printed parts (no screws, shafts etc. needed) I recomend using the 3mf/gcode files because of the already placed supports. This thing needs supports! (see…
I do a lot of rimfire Benchrest. I have tried several single shot sleds yet none have really produced a positive result. I came across Steve's sled and printed it out. I like how the bullet sits within the sled as well as the angle in…
Nachdem ich bereits eine Variante in Holz erstellt habe, nun nochmal das ganze als 3D Druck! Viel Spass beim drucken! Falls der Schieber zu stramm funktioniert, etwas Fett auf die Reibestellen geben. Gerne Bewertungen und Fotos..…
This model is compatible with the lego system.
5/8 Cheek Rest Spacer Fits Victor Titan Universal Cheek Pieces. Made to specifically fit a CZ 457 Pro Varmint stock.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Nothing fancy just a CZ457 22LR Mag holder I made for my safe. Holds 7 mags total I made mine from Carbon infused PLA 3 perimeters 20% infill I attached mine with Goop glue and let it sit over night before use. I edited this model after…
If you remove your passenger pegs you can bolt this in place to cover the holes. Needs 8mm socket head bolt to hold in place, the stock passenger peg bolts are too long and won't work. I suggest printing this upside down with supports,…
This model is compatible with the lego system.
To complete you need a filling material for a core sandwich processing.Needs skills in composite materials and development
Made to replace the original ball on my CZ457. Have 2 designs included; preferred the beehive style pictured due to the other having some slightly sharp edges however that might be your preference.
CZ 457 Bolt Knob – Smooth & Criss-Cross, Two Sizes (M6) Tired of the tiny factory bolt knob? This set of replacements gives your CZ 457 a more comfortable, confident grip — whether you're at the range or out in the field. Six variants are…
In short this was designed to give me options for Length of Pull for my CZ457 Pro Varmint with the Boyds wood stock. There are 3 models, 25mm, 20mm and 15mm The fit is not perfect around the edges but I got it close. Once mounted it is…
This is CZ457 ECI magazine block. Fit a CZ457 or 455. Use a one inch key ring to connect the banner with ECI.
NDr Shooting Supplies makes very nice aluminum mags but they are as slick as goose grease. This is a TPU magazine boot that improves handling. It fits their 15 round, aluminum 22LR mag for the CZ 45x series, the 512 and the Lithgow LA101.…
Ultra-compact, ultra-budget internal resistance tester / milli-ohm meter based on the TS457 modules available on AliExpress. It's primarily intended for finding the internal resistance of batteries (up to 45V), but it works just as well…
DE: Mich hat die hintere Riemenbügelöse immer gestört wenn man die Hand unter den Hinterschaft legt und ich wollte eine "ebenere" Auflagefläche für einen kleinen Sandsack oder Ähnliches. Schneller Druck in TPU, wird einfach mit einer…
Zur Verbesserung der Druckausrichtung für Wagen 900-456 wurde das Versuchsobjekt VO 456 als separates Modell entwickelt. Der Wagenkasten wurde auf ein Drittel seiner ursprünglichen Länge verkürzt. Das Ziel war es, die Wölbungen im unteren…
I wanted something different when it came to safety flags and making sure that the action was cleared for RO's and others. So I made this. I based the measurements from my CZ457 Pro Varmint. With a little squeeze the holder pops into the…
Sandpaper holder 75x457mm for drilling machine Required material: Sandpaper strip 75x457mm Screw M12x12 (1pc) Self locking nut M12 (1pc)
Able to hang your cz457 bolt into the safe.
This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you can bolt this plate in place of the missing stalk using a 6mm nut. These do not have to be very tight, just enough to…
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…
This is a RAM mount that attaches to the steering stem nut. It uses an 8mm RAM ball that is sold/intended to be used with the handlebar clamp. An STL for the RAM ball and shaft are not included, I used one I had sitting around, but may…
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
The ball socket requires support material. Organic support works best.
Simple for printing enclosure wuth 18650 battery, charge controller and charge indication LED BOM: + LED 2x5 square lens (optional: use for replace SMD led from charger and place DIP into 3d printed box) + TS457 module + 18650 LiIon…
lego 36840 36841 99781 99780 2436 99206 87609 64570
DE: Da ich nichts Gescheites für diesen Einsatzzweck gefunden habe, wurde der Drucker aktiviert :-) Gedruckt in TPU, dann mit Klett auf den Schaftrücken geklebt damit es leicht zum Reinigen abgenommen werden kann. Hat schon 1,5 Jahre…
Housing for TS457, TS459. A device for measuring internal resistance to constant voltage. The device has a built-in 18650 power supply and a TP4056 USB-TYPE C charging board. The device also uses the GX12M-4B connector for compatible…
DE: einfacher Magazinschuh aus TPU, der über das Original-Magazin (Stahl) gestülpt werden kann um es besser greifen zu können und als Schutz. Zusätzlich kann so noch ein farbiger Akzent gesetzt werden. Je nach Passform des Magazins kann…
Print one normal one mirrored. The cover was made by Sacr3D Etching https://www.prusaprinters.org/de/prints/64576-mini-12864-screen-cover-and-brackets-for-bear-fram
By request, a collaboration with m1xstr, this is a pair of boxes for storage of CZ457, and similar, magazines. Holding either six or twelve magazines, these boxes will accommodate both 5 and 10 round magazines as well as those with…
I'm reuploading my CZ457 stock. The stock is for CZ457 in .22WMR/.17HMR, it also fits a thick varmint barrel. Purpose of this is to have an option for a simple, cheap and reliable ergonomic stock for the CZ457 rifle. The stock has built…
I printed my first parts in PETG, but when I used them, once I pulled them out of the dishwasher, they were deformed. They couldn’t handle the heat inside the dishwasher. That’s why I printed them in PCCF "Prusament PC Blend Carbon Fiber…
wall mount for the LEGO 75457 UCS Executor
Foto ist ein Beispielbild. Photo is an example image.
This will cover the hole left in the fender when you remove the reflector. Attach with a 6mm nylock nut over a washer. Be careful not to over tighten, it only needs to be tight enough that it doesn't spin. Blank version has nothing on the…
Just a little set of parts to adapt a WELL L96 airsoft chassis to a CZ457 22lr backyard popper. Instructions here: https://imgur.com/a/ja47I1v I printed these parts in nylon, but use whatever material you want. The large adapter piece…
Zur Verbesserung der Druckausrichtung für Wagen 900-456 wurde das Versuchsobjekt VO 456 als separates Modell entwickelt. Der Wagenkasten wurde auf ein Drittel seiner ursprünglichen Länge verkürzt. Das Ziel war es, die Wölbungen im unteren…
Well, this might be the dumbest (but most useful) print I've ever designed. Long story short, I wanted a 6th Gen iPad in my kitchen to display my Home Assistant Dashboard. Decided I didn't want to put any holes in my wall, nor did I (or…
This is a spacer to fit between the forend of a CZ 457 AT-One stock and a mounted rail. The spacer provides a flat surface the width of the rail and length of the stock. Holes can be drilled as appropriate or use negative cylinders to…
![Mini Internal Resistance Tester [TS457]](https://media.printables.com/media/prints/1623939/images/12214072_5881d1c1-e25b-44dd-9039-d79ebbe03d05_47011d00-ea89-45a5-8b42-33dac92327d6/large_display_img20260302211117_1623939.jpg)
