Liczymy pasujące modele…
First 2024 design in my Bookmark Tanks Collection! For this design I tried to capture little more details in the model without losing simplicity. I hope you like it! Introducing Sherman M4A1! Sherman M4 bookmark for those thrilling war…
An adjustable side mount for the Samsung Galaxy S4. It helps you to hold the phone that is running Octo4A. You can track the process with the cam or create a timelapse of your print. I specially made the design for Samsung Galaxy S4 but I…
⚠️ Important! This model works with the 4 amp “standard” Bosch charger. Please check the following picture and make sure your charger matches. ➡ Do you have the smaller 2 amp “compact” charger? Click here to go to the variant! About this…
Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…
Allows to store 18V Bosch batteries
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Yet another lithophane, this one for users of the TI-99/4A Home Computer or members of forums.atari.io NOTE: You MUST use 100% infill or it will not look good when finished.
Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.
This is my original Pile of Poo 3D model, first published on Thingiverse on 2016/07/20, now hosted on GitHub . I am publishing it on Printables as well so everyone can more easily attribute it as a remix. Check the GitHub repository for…
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
Hi there, I would like to share my first design for the BOSCH eBike Battery Charger BPC3400 4A Charger Model No: EB12.110.001 Have fun with it! I used 4x40 screws and 6 dowels When you screw it to the wall, don't overtighten!
-Two colors -organic support -0.15 layer height
An adjustable side mount for the Samsung Galaxy A50 so you can run Octo4A and make great timelapses with Octolapse. If your phone is in the same dimensional ballpark as the A50, it will probably fit as well. If it doesn't, I've included…
Char Sherman M4A1-Early echelle 1/33 Tourelle et canon mobiles Chenille et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Impression en PLA Chenille composée de 76 maillons relier par fil de fer…
I had a need for a portable power source for another project - as I had a couple of the (green) Bosch tools made this adapter so I could repurpose the batteries and chargers. The print is in two parts. I printed mine in PLA which seems to…
The Grumman F-14 Tomcat is an American carrier-capable supersonic, twin-engine, two-seat, twin-tail, all-weather-capable variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter…
This model is compatible with the lego system.
This set of two gridfinity is perfect to store you crimping tool kit. The first bin is for the HSC8 plier. It's 3x5x4U The second bin is to store the ferrules, it's 3x5x5U. See my other gridfinity bins at…
I have a Option 3 I'm working on as well with the model I belive is from battleFront 3. I will post that where time permits. These options here so far look great. ( Well I think so ) Sizing should be pretty well spot on, but do check it…
F3d file included so you can adjust for the pitch of your pegboard holes... if you need to test the gauge, print the first 7mm to get a test strip. Prints without supports (FF Adventurer3 - 0.3mm layer height) - just print it with the…
Holder for a 40v 4ah Ryobi battery and the slim charger
This is a small battery box for 4 AA sized batteries with a sliding lid. I made this to hone my skills in designing 3D parts. Print instructions Will fill this in later
The M4A1 Sherman is the first variant of the early-generation Medium Tank M4 (Sherman) family. The M4 Sherman medium tank, named after the great American Civil War general William T. Sherman, was one of the Allies' most iconic fighting…
For this particular project I used 500W ATX power supply. Additional parts: 1x 2A USB socket 8x 4mm banana type connector 1x power switch 1x Buck boost power module Printed with PETG 0.2mm
Remixed to take my cells which were slightly taller. All parts included for clarity, but full credit to the original author for designing this awesome pack. Print Settings Printer Brand: Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…
I wanted a printed case for my new Pixel4a but I didn't find anything premade I liked. So I made one myself. There is one big Problem still: the top speaker grill is blocked by the case, but adding a cutout there would make the case…
An updated version of the model I made and posted to /r/functionalprint . Print with the open top of the holder towards the print bed. Include supports!
This version of the Sherman would be the base for what would be the final Sherman in US Army use, seeing action all the way out to the Korean War in US Army hands. This tank had a welded hull just like the M4, A2, and A4, but used a new…
This model is compatible with the lego system.
Compact wall mount for Bosch ebike battery charger 4A BPC3400 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
I couldnt find a fitting wallmount for my charger so I got enspired by this one: https://www.printables.com/model/287990-holder-for-bosch-charger and designed my own. You can print it without any supports if oriented on the angled side >:)
The M4A2 Sherman is the third variant of the early-generation Medium Tank M4 (Sherman) family. In April 1942, the M4A2 was designed with a new General Motors 6046 engine (two GM 6-71 General Motors Diesel engines combined together),…
Protect your precious Nikon batteries with this simple and “snappy” case! Printing Use the standard print settings in your favourite slicer. Make shure that “Minimum travel after retraction” (Prusa-Slicer) is set to 1 or lower I used eSun…
I made this to attach a 14AWG wire to a rope for my EFHW antenna. You don't need to use all four holes to get enough tension to hole the wire, I used 2. Simply attach a rope/paracord through the larger hole and you're all set to hoist…
Phone case for a Google Pixel 4a with Quadlock style connector. Quad lock doesn't make a case for my phone so I made one myself. .step file is included if you need to modify anything. Print instructions Print Settings Printer brand: Prusa…
Simple 2D CS:GO Weapons. Useful for keychain and wall art decoration. Upscale model if required.
This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…
Renault Clio II. / Thalia ventillation system one of the gear usually breaks. This is a replacement gear. Need some voltage reduction to not breake the 3D printed gear.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
M4A1 - wall art - keychain Scale it to your needs Happy printing!
Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…
These are some 3D printable cam covers modeled after the ones on the Toyota 16V 4AGE. This is mostly just for funsies/decoration because I doubt the features are going to be accurate enough to use as a reference. The models are 1:1, so…
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
I have designed the "Electric" Ebike Battery Mount for myself, but i decided to change it with you all. My Battery has 36v, 12ah and is 70x40x293mm. I have bought it on aliexpress, something like this. Battery-Pack 36v - 12ah Or you can…
This is a simple shelf for the T-Mobile G4AR gateway that can be mounted directly to the wall. A hole has been cut in the top to easily route the cables below. This is very helpful if you have an antenna booster and are utilizing all 4…
I made this simple model to sit on top of @INVESTIGATE 's "Creality SpacePi Space Pi X4 Filament Spool Guide Fix - cliped" printed both container and lid at .15mm layer height / 20% infill / Speed: 80 mm/s Print container with its "legs"…
you can friction fit these Iron sights on any picatinny rail. THESE DO NOY WORK WITH NERF OR WEAVER RAILS** no hard wear required. Print Settings Rafts: Yes Supports: Yes Resolution: 200 Infill: 25 Filament: PolyMaker PLA any Category:…
Phone Mount for the Ender 3. Screws in behind the two front screws and angles the phone to show the print surface.
The model fits M4A1 muzzle
Allows you to use a standard garden hose to drain water from your Daikin AC outdoor unit. Designed for the RZQ125KCV4A model, but will likely fit others as well. Print with a sturdy filament if you can, otherwise it can be a bit delicate.…
Recently I came across the Channellock Hook & Pick Set at joshfulford's Hook and Pick Set Pegboard Holder . I immediately thought that these tools might be good for removing 3D printing support, and I looked for alternatives among the…
I drew the model in Fusion360 and used the measurements from my own phone. I used TPU to print the case.
A simple slim case for Google Pixel 4a (4g), no supports required. Tested with PETG filament only. Recommended layer height: 0.12mm or less If you want to design your own case I made a 3D model of the smartphone, feel free to use it:…
We use a range of Ridgid powertools on the mine and the batteries get absolutely battered. Once the batteries clips and mounting plate are broken they are pretty much useless, I have spent many hours painstakingly reverse engineering the…
Check out the v2 insert https://www.printables.com/model/1435570-high-frontier-4-all-insert-all-in-one-v2 The epic Phil Eklund's game High Frontier 4all sadly comes in a box without an insert. I wanted a solution to fit the base game and…
Frizerator H4A1 Frisbee Launcher Pistol Remix of Dave Delay's Fizerator H-4, https://www.thingiverse.com/thing:693465 New feature of the remix: Powered by easily available rubber bands (30 mm ... use 2 or 3 to achieve desired power).…
Sometimes those needing a case don't know of it's existence because it's on a niche site and lost to time. I'm uploading this model here because I believe it to be the best version of a case for the TIPI32K. You'll have to change the…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
TPV case for a Pixel 4a 5G. Regular version has 1.5mm thick walls. Thick has 3mm thick walls for extra protection. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: Yes Resolution: 0.16 Infill: 100%…
Get rid of the factory idle speed control valve, or auxiliary air valve as Toyota calls it. The OEM valve when cold idles the engine around 2000 rpm which is very annoying when your aftermarket exhaust is super loud. Mounting hardware is…
Micro/Type-C USB 5 В 2,4 А двойной USB 18650 Boost зарядное устройство для аккумулятора мобильный аккумулятор аксессуары для телефона DIY https://aliexpress.ru/item/1005001692510053.html
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks. Has different guns you can…
The bracket will clip into the slot on each side of the oscilloscope, securely holding it in place.
This model is compatible with the lego system.
Single part case 12864 LCD Full Graphic Smart Display inspired from the great design of the "LCD MKS Mini 12864 Mount Enclosure Box Caja" by Campy : https://www.thingiverse.com/thing:2915718 BOM : 4x M3x12 screws (Don't tight too much the…
Introduction This is a case I designed for the OrangePi 4A . You will need to print a case bottom and case top cover of your choosing. Personally, I like the external antenna versions (ANT). Simply run the antenna wire in the slot in the…
Wallmount for BOSCH_BPC3400 4A eBike Battery Charger, Remix from arminth and FuWeissingers Wallmount, with Plug Holders on both Sides . Printed with Das Filament PETG clear, 25% Infill, no Support needed. Prusa MK3S+ 0.6 Nozzle / 0.30mm
A small control box mounts an Arduino Uno, an LCD2004A display, and a KY-040 rotary encoder. Internally, the box features mounting points for all three boards and cutouts for a panel mount push button switch, a panel mount power switch, a…
I couldn't find a proper Google Pixel 4a 3d model anywhere with correct side profile, a few models I managed to find were completely wrong, that's why I decided to make one myself from images and real life measurements. This model isn't…
Simple phone stand to use an (old) android phone for Octoprint using Octo4a. Only needs 2x M4x16 screws to attach the holder to the base. This lifts the bottom edge of the phone about 80mm of the table, and with the screws you can tilt it…
A stand for the Google Pixle 4a. Uses the original Cable that came with it. Also fits my Pixel 1. The USB Cable sits ~1 mm too high, so the phone may wiggle a bit to the sides. This is a remix of the iPhone 6/6s stand remixed from…
I didn't like the other designs, they were using too much material and the mount was too much visible behind the router. This is a very simple design. Print 2 of these and you're done! Print Settings Printer Brand: Creality Printer: Ender…
Print it with Tree-Support on auto. PLA is fine. 15% infill Support tree-auto 3 wall-loops
Please see the original file for the build instructions: https://www.printables.com/model/136795-octo4a-phone-holder-to-run-octoprint-on-your-smart This file is to update the mount for an Ender 3 S1 (might work for other models, test it…
The mount secures the gateway safely to a wall, keeping it off desks or shelves to free up space. Custom fit – designed around the TMO-G4AR for a snug and stable hold. Wall-mountable – allows you to position your gateway up and out of the…
Our Acura RDX center console latch snapped (Part number: 83417TX4A01) and after seeing the Amazon replacement would be $15 ( listing ) I thought it would be a great opportunity to try CAD modeling 🎉 30 minutes and $0.30 of PLA later and…
This model is compatible with the lego system.
its M4A1-S for DUMMY 13 print with support
I made this when I was converting my AE86 to a coil-on plug setup.
Just a nice holder for the BOSCH ProCore 4Ah Battery (also called Profactor)
Please see the original file for the build instructions: https://www.printables.com/model/136795-octo4a-phone-holder-to-run-octoprint-on-your-smart This file is to update the mount for an Ender 3 S1 Pro. I've included mounts so it can be…
There's not much to say: Nikon EN-EL14a Battery Cap -- I didn't like the other designs on Thingiverse. This design hat a small notch that keeps the cap from falling off. 2026-08: Version v2 has now a different "nose" to hold the cap on…
My in-law's Lay-Z-Spa A coupling broke through over-tightening (the one that connects the inflator part of the pump to the tub) so instead of paying the inflated(!) prices I'm seeing for spare parts at the moment due to the pandemic, I…
A case for Lichee Pi 4A, which can allowed max 18mm height cooler installed. About Lichee Pi 4A: A RISC-V SBC from Sipeed https://wiki.sipeed.com/hardware/en/lichee/th1520/lp4a.html Update: Now with push button for all button on borad!…
Added Sy's peglock to Jef's battery holder. Fits the high power hp 4ah and 4ah lithium standard battery updated 8-11-2023
Adapter: Bosch "Power4All" batteries to Einhell 18-V drill I have an old Einhell "LE-AS 18" drill that was, at the time, powered by NiCd accumulators. Similar drills were available from other suppliers such as Ferm, Workzone and others.…
Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG. (Sherpa mini spacing) Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG. Either too high or too wide - Its diabolical…
EDIT/WARNING: This must be printed in flexible filament such as TPU. It will not fit with PLA, PETG, etc. Google Pixel 4a (not 5g) case , based on the design by fiunkel. Changed the following: Removed the headphone jack (I never use it,…
This JB is a total of 48mm in height w/a 3/4" (19mm) side entry access hole, which allows use of the original Thingiverse JB Cable plug. JB also has a 5mm recess to allow the Reolink camera mounting plate to sit flush with the top of the…
Clo 3D Tutorial Gem #Create4ACause I wanted to show how you can make design in Fusion 360 and import the FBX file into Clo3D (a program I use to 3D Sewing) for your cosplay projects Print instructions Unassociated tags: #Create4ACause, 3d…
Cam Mount for Reolink Camera RLC 1224a and Dahua Water-proof Junction Box DH-PFA130-E. Printed with Bambu Lab X1 and 0.20mm Strength profil. 6 wall, 100% infill, support on plate. Category: Camera
Nothing to add, print and enjoy!
this is a turret for a Canal Defence Light sherman made in cooperation with panzerserra (Marcos Serra) please check out his blog here http://panzerserra.blogspot.com This is for a italeri 1/35 M4A1, but please let me know the turret ring…
A basic rack for the Molotow One4All Refill acrylic colors. Use the file RefillRack_legs as a base. If you need more racks, use the file RefillRack and glue it on the top of the other one (use double sided tape). You can use the…
