2898 modeli
I designed and 3D print a dust cover located on the right side of the curricular saw that makes the dust extraction much more effective Starting from another similar project , I designed the same part but adapted to my TS55 REBQ version.…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
The fixed length column for TwoTreess' TTS-55 to adjust the laser focus with an installed Air Assist that the manufacturer forgot! If you have installed the original Air Assist, the distance to the workpiece changes. With this model, you…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Wydruk około 0,82 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a riser stand and cable organizer for the LG OLED C1 65" (or 55") TV. It raises the TV 3 cm higher on the table. Ideal for use with a Sound Bar that's doesn't fit under the TV. Adds more than enough clearance to the LG SP11RA…
Wydruk około 8,20 €–10,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
The standard holder from https://www.ebay.nl/itm/Universal-Mobile-Phone-Adapter-Holder-Mount-Telescope-Binocular-Spotting-Scope/222674716928 doesn't fit on a 55mm Swarovski eyepiece. Therefore I've designed a fitting part. In the picture…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
This is specifically for the TOUGHBUILT C550, C600, C650, C700 sawhorses. Držiak pre stavebné kozy TOUGHBUILT C550, C600, C650, C700. TOUGHBUILT C550 TOUGHBUILT C600 TOUGHBUILT C650 TOUGHBUILT C700
Wydruk około 3,00 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print. Recommended layer height 0.2mm or below. 3-5mm of brim recommended. Takes around 4h15m to print with previously mentioned…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Every brand has different dimensions for hoses, and some brands have several sizes. This is adapter for Milwaukee CCS55 circular saw to Festool Cleantech D36 hose. The adapter is designed to fit directly on the CCS55 dustport without…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Simple Modular Cable Spool. The dimensions of the spool are 20mm inner diameter, 55mm outer diameter and 20mm width. I wanted to organize my cheap electronics wires and found this gridfinity model to store spools, but didn't have spools…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
I designed this template for my mother, who had previously made the template out of cardboard. "Marketing on" You love calligraphy and want to bring your penmanship to a new level? Then this DIN A5 stencil is just right for you! This…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
This spool hub was created from measurements of a printed original part. It fits Overture and Polymaker spools that are 55mm, but I also included the model file with user parameters so that it can be made to fit any size spool. Modify the…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4 brass insert nut M3 4 M3 1.5cm screw 1 test board 2 5x1 female header
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a reference pylon for the Rivarossi 5523 model train bridge, to replicate the different ones simply scale it on the X axis. For reference (in Italian):…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
1927 entered into history as the year of birth for the Mille Miglia, the famous 1,600 km racing course through Italy. By 1930, the name of Mercedes-Benz was closely bound up with this endurance race. And the first victory came in 1931 for…
Wydruk około 5,84 €–7,14 € nettoWstępna wycena jednego wariantu
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the hole 28 mm and hose 1". Printing from ASA or PETG. Variable layer height (for the thread 0,10-015 mm).
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
Designed to fit on the outside of a 63mm OD/52mm ID basket with tabs around 22.5mm wide on each side. Funnel opening is 75mm, overall height is 30mm.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Volvo 850/855 glove compartment stop arm. OEM part number 9132258-6. Stop arms on both sides of the glove compartment should be identical according to the official volvo manual. I only swapped the left side arm so i can only confirm that…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Black & Decker Workmate WM550 Type 9 4 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Wydruk około 9,17 €–11,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Prusament Jet Black. PETG 0.20. Infill : 30%. Gyroid. Nozzle : 235c. Bed : 80c. Support : None.
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for 30 / 55cc tube/barrel. One piece desin which does't require supports to print. 3mm brim is recommended. Print with 0.3 layer height or below, 10-25% infill, 2-5 perimeters. Note to position the bottom against the bed because the…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meeting my local store I was shocked by how expensive those parts are (reg. EUROPLAST System 110x55) and made some parts myself. Model is for 0.8mm Nozz and NO Supports (whilst therefore, my design is a little different compared to the…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slightly reinforced and remodelled from scratch to be able to print. PLA, 50% infill. Supports needed and included in gcode. The hole in the middle might require slight filing to sit perfectly on the axle.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Dieser kompakte Tag dient zur schnellen und eindeutigen Kennzeichnung von Motorola MTP3550 Funkgeräten. Er wird einfach über die Antenne geschoben und am Clip-Halter fixiert. Ideal für Feuerwehren, Rettungsdienste und Hilfsorganisationen,…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Jednoduché skladné stínítko pro náhledové monitory Feelworld 5,5" Po vytištění opatrně odlomit bočnice od vrchní části a odřezat podpory a límce Simple foldable sun shade for video monitors Feelworld 5,5" Print it with PETG 0,2 mm , rafts…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protective storage case for Intel LGA 1155 CPUs. The case holds a single CPU and snaps closed without screws or additional hardware. The top has an opening that leaves the CPU visible, so the model name and other markings can be read…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed additional divider inserts for my Plano 3555 small parts storage boxes. Prints without supports on my MK4 w/PLA.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Achtung Akkugröße!! nur für 1950mAh Akkus !!NICHT für 2200mAH Akkus!! Dieses Modell ermöglicht es, das Motorola MTP3550 (und baugleiche Modelle) sicher und griffbereit im Auto zu verstauen. Der Adapter nutzt den vorhandenen Getränkehalter…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
Stroboblikač: https://pihrt.com/elektronika/287-ne556-policejni-stroboblikac-smd Category: Electronics
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need a pods for my van to contain the audio speakers, it doesn't have slots in the doors so I made pods for them. projected for Pioneer TS-A10955 4" only support YES material prusament Petg
Wydruk około 8,37 €–10,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The holes are adapted to the Cuda console. Die Bohrungen sind an die Cuda-Konsole angepasst.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Original closing bracket broke. This is biased on original size, but I might add version with hook extended by 3-5mm later. PET-G might be better for this (temperature), but PLA worked well.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Universal Cross Base / Replacement for Princess Stand Fan 355840 Rigid ribbed cross base, replacement for broken pedestal fan feet. Eliminates the original clip-hinge weak point. M5 tapped holes, axial load. 210mm span, freestanding…
Wydruk około 4,52 €–5,53 € nettoWstępna wycena jednego wariantu
This is a dr-55 Ratchet Screwdriver for the Ikea skadis pegboard.
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Black & Decker Workmate WM550 Type 9 1 Loch Halter für Spannbacken. Wird gesteckt, verschrauben nicht nötig. Der Halter sollte sich stramm aufstecken lassen und dann einrasten. Filament PETG Flashforce PETG Black
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This handle extension allows for an upright posture while pulling the compressor behind you. The handle was printed with PETG and consists of four parts that are joined together using M4 screws and nuts.
Wydruk około 14,30 €–17,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This mounting bracket was designed to make using the projector easier in temporary setups. The ubiquity of ¼"-20 screw support solutions in the photo/video industry makes it simple to find a quick place to mount a projector. Gorilla pods,…
Wydruk około 6,38 €–7,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To identify a coolant pump. DE: Zur Kennzeichnung einer Kühlmittelpumpe.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…
This is a round servo horn for a 55G Servo with 4 M3 holes.
Wall mount for a TP-Link Deco X50 node/4g-router and 5G router. The router model is for a X50 5G router which is oval and tapered upwards, not round. It isn't as snug as the node bracket, but when hooked up to the cables it wont move. If…
Replacement power outlet (EU type) for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.…
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.
Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…
part bolts into existing belt clip mount (uses m2.5 bolt) no recommended to print in pla , it will shatter or deform . best printed with cf filled nylon or PC . no supports needed
Hi There :) Here's a huge set of 55 easter eggs. Each egg is equipped with a flat base to stand on its own and with a thread holder to be hung from. All eggs are printable without support or infill but I recommend to print the ones with a…
New cover for 12mm RGBW LEDs and space to mount an ESP32 to control with WLED
EDIT: I added a RAR with all files in one!!! A small collection of aluminum profiles to print adapters or other things for your printer. If you can use it please leave a like there. Please support me and leave a like there. It's just a…
This is a solution for a clip to lock the IKEA SAMLA 55/130l boxes. I did not find a solution for this box size as simply scaling a 22l clip does not provide a solution tightly closing the box. It creates a tight closing and is easy to…
Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…
This is a deep easy to handle 55mm lens cap. It is 4 pieces outer shell, buttons with spring, and 2x jaws for each side The lens cap snaps together after printing. Please use PLA and 0.20mm quality settings. See notes for PETG below. To…
A mount for the first version of the Picostation, with direct access to the SD Card slot, bootsel button and activity led. The Picostation must use the feet provided, and seat in a slanted way. This allows for the SD Card to be accessible…
Someone asked if it was possible to design and print a killflash for an EOTech so I gave it a shot. There's probably other existing models out there already but it was a fun little project. It works better than I expected and would…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
This model is compatible with the lego system.
Meticulously modeled 40° stand for the Logitech MX Ergo trackball mouse. Includes a slot for a trackball pusher tool (included) as well as a storage slot for the USB wireless receiver. Uses (4) 9.5mm x 2.5mm and (8) 6mm x 3mm neodymium…
Disclaimer: This is not an official LEGO product. All design rights, trademarks, and intellectual property belong to the LEGO Group. This model is a fan-made recreation of the LEGO 2556 Ferrari Formula 1 Racing Car set, intended for…
Zur Befestigung von Steckdosenleisten an der Wand, Werkbank oder am Tisch habe ich diesen Halter erstellt. Der Halter kann für Mehrfachsteckerleisten mit Schalter verwendet werden. Benötigt werden zwei Halter für eine Leiste. Die Halter…
Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…
This is a remix of https://www.thingiverse.com/thing:1147252 because it was very wide. My remix is 55mm wide exactly what I need for all of the toothpastes. Support You can support me by liking and downloading my projects or you can…
Race Mag Pouch for 223 556 Pmags for ELS mounting system Update 11192023 Added Strengthening Ribs to the mounting side of the pouch Reduced mounting height by 1mm Made insert holes 0.2mm smaller Update 01152023 Got some feedback about the…
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
Hi, to download electric car plastic gear for gearbox 550: Inner teeth: 9 External teeth: 48 gear is my project, printed and works very well :) - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…
You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…
This is a scale version of a wind turbine approximately around 1:100 The rotor is connected to the nacelle with a 608 bearing Print all parts once except for blade print this 3 times. Everything should just press together, although…
A bracket for mounting Shelly 1 PM plus, Shelly Dimmer 2 on back of Gira System 55 Switches and Sockets Shelly Plus 1, Shelly Plus 2PM and Shgelly Plus i4 should also fit but is not tested…
So yah, I downloaded this like a lot of other ppl and struggled like crazy with the original design. it kinda sucked.. and I was determined to make it work cuz I know lots of avid shooters, including myself, who would benefit greatly from…
Thanks to Arshia who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request…
This is a dust cover for the Festool TS55 FEQ track saw.
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
This model is compatible with the lego system.
No Supports Needed print at .16mm layer height 10% infill 40mms print speed for best results tight tolerance's (expert print)\ No Selling added handle version (drink wont line up with handle without repositioning) -if you'd like to sell…
This model is compatible with the lego system.
The popular Ikea Samla bin was not easily available in my area, but it was easy to purchase a Sterilite 55L/58Qt plastic bin from a local Walmart. I used the original model from the enclosed link and remixed it to fit the Walmart…
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…
Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…
Replacement socker/switch plate for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original. Print…
Multiple versions, also with all letters of english alphabet. Extra version for single paracord strand. I use lighter and pliers to fuse both ends of paracord and hide connection inside opening at bottom. No supports needed, print in…
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Bill 'o Materials: 📦…
Empty chamber / magazine flag for CZ 455, CZ 457 rifles in 22LR. LH versions including.
This is a hood for Canon kit lens. Three models are included, rounded hood, petal hood and a base that you can use to design your own model. f3d file is included.
