Multicolor Spinner Cone for 3D Printable Engine by CATIAV5FTW
Simple remix of the spinner cone for multicolorprinting, as the glued version kept falling apart unfortunatly
- Pobrania
- 147
- Polubienia
- 22
- Ocena
- 4
Liczymy pasujące modele…
Simple remix of the spinner cone for multicolorprinting, as the glued version kept falling apart unfortunatly
Version 1.1 released May 20 2024 These 5FFG's (5 Face Radius gauges) are a ripper! The gauge I was using struggles to make accurate inside (concave) fillet measurements. In the end the gauge allowed me to only approximate the dimension…
Multipart version of Petereyen86’s stand, optimized for print quality. It works like a Lego set, with a bit of glue required to assemble. Files are available for both 100% and 60% scale engines. If you’d like to support my work, leaving a…
This design is fully 2D printable in A4 format, but was still a challenge to create. I wanted to create a guide for assembly and figured it could be interesting to others. For more details, please visit the original listing on…
This is the front logo for the Seat LEON 5F which replaces the original. Designed in two pieces. Ideal to glue it with two-component and attach it to the car with double-sided tape. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
5ft Lighted Stargate controlled by arduino (Just a heads up its a very long print 900+ hours) Not a beginner project. Need an understanding of wiring/soldering. Need a understanding of programming arduino boards to load my program.…
I hated having tangled ratchet straps, so I decided to make a winder. I wanted to construct the winder so I wouldn't need supports during the print. 15 Ft Ratchet Strap: https://www.amazon.com/gp/product/B01G30J8JY Video of it in use…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
This coin holder supports 50ct, 1€ and 2€ coins. There are nine slots. Each slot fits for the three coin types. There are only nine slots so you can grab a coin easily. There is not much material below the coins. That is necessary because…
This rubber band-powered car is easy to build and even easier to use. It is an original design which features a 5:1 beveled gear ratio, a print in place bearing, a locking mechanism and is wound up by a powered drill! Notes: .gcode and…
I separated these from the original design to make downloads easier. Stargate Atlantis Glyphs, so you can now make an SGA Gate. I designed them to use 5mm LED's for the lights. Category: 3D Printing
5ft SGU Stargate. i've not printed or tested the design yet. The Stargate is designed to snap together using dovetail connections and superglue to make the assembly permanent. Sanding on some pieces may be needed to make them fit better.…
Includes: Two types of front badges Rear handle Compatible with all body versions. Only for prefacelift vehicles. I recommend printing in ASA, or alternatively ABS or PETG. Facelift is here:…
Macross Frontier VF-25F adapted for Dummy 13. It can transform into all three modes: Battroid (Robot), Gerwalk (Hybrid) and Fighter (Plane). Printing: Print all parts with ABS/ASA/PETG. Do not print with PLA. Most parts requires supports…
A wall mount for a Lenovo Tab M10 TB-X605F with built in cable routing hiding the USB cable. The backplate and the front panel is held in place with 2x6mm magnets. Glue the magnets to the pillars in the lid, they latch onto the screws…
The clutch of the Bosch MUZ5FW1 meat grinder has a predetermined breaking point to protect the food processor motor from overloading. Since I didn't want to order a new clutch every time this predetermined breaking point breaks, I…
Includes: Front badge Rear handle for SEAT LEON 5F (I dont know if is same in another vehicles) Compatible with all cars with new logo. Just check size. Big is from facelift SEAT Leon 5F and small is from SEAT Leon 5F prefacelift. I…
Mount your existing 17mm diameter Phone holder in your Seat Leon 5F Works with my Belkin car Magsafe mount
This niddy noddy is designed with a full wrap being 5ft or around 1.5m. Use this to collect yarn up into an untwisted hank before twisting it. Useful for post-processing after dying yarn. NOTE: make sure you use the correct cross bar on…
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #0 (34.6mm) opening. This is modelled as accurately as possible from an original piece. There are 2 sets of files here - one I originally did in PETG and then a later one…
Ideal to be printed in PETG! - 0.2mm layer height - print without support -spare infill density 25% - wall loops: 6
A lens hood for the Sony 55mm F1.8. Remix the fusion files if you want to make your own custom hood. Category: Camera
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #1 (41.6mm) opening. This is modelled as accurately as possible from an original Copal #0 lens-board with a modified opening. Print instructions Printed in PETG 0.1mm…
Print Details All pieces were designed to be printed on a Creality Ender 3 Pro or larger. (Minimum Bed Size: 220 x 220 x 250mm / 8.6 x 8.6 x 9.8 inches) Each letter is made up of two pieces, a base and transparent insert that the LEDs…
Aletas de tiburon para triangulo de ventanillas traseras laterales para seat leon5f 2019 (no se si vale para otros años)
This is a remix of Youpak's mount for the GSB18V, which I really like but didn't fit the smaller GSR12V. Printed in PLA with 20%infill and 3 perimeters.
I separated these from the original design to make downloads easier. I made the decorative back pieces for the gate by request. (I did not test it as I have my gate hanging on the wall and didn't need them) Category: 3D Printing
Hier könnt ihr euren eigenen Extrusionen rein machen für alles was nicht im Auto rum fliegen soll ;)
A robust stand for an EUC (Electric unicycle), specfically for an Inmotion V5F. Instead of lifting the 11 kg and carefully putting it on the stand being worried about breaking the print… Don't lift it… just ROLL IT IN like a boss! No…
Includes: Two types of front badges Rear handle Compatible with all body versions. Only for facelift vehicles. I recommend printing in ASA, or alternatively ABS or PETG. Facelift is here:…
SEAT Leon 5F FR Logos — Pre-Facelift (2012–2016) Custom 3D-printed FR badges designed specifically for the SEAT Leon 5F pre-facelift (2012–2016) . You will find two different model options depending on your printer setup: 🟥 For…
5fach Hub für Anycubic Kobra 3 gebogen
This is a redesigned Flat_Stripe for the 3D Printable Jet Engine by Catiav5ftw that fits the Spinner_Cone better. The original Flat Stripe was a little bit to wide to easily fit into the Spinner Cone for me, and I noticed a lot of other…
Eine Anpassung des “ adapter locking ring max size.stl ” aus dem Perpendicular Drilling Jig von poulanker [Link: https://www.printables.com/de/model/217743-perpendicular-drilling-jig/files ] für den Bosch GSR 12V-35FC. Ich hoffe der Ring…
This is a 3D-printed adapter for the property VESA Mount for the HP OMEN x25f and x35c. The through holes are for M4x40mm bolts.
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #1 (41.6mm) opening. This model has a 12mm extension on the front to allow better access to the controls of a given lens should it be required. This is modelled as…
Test dummy model based on a 5ft 6in tall female with average proportions. Model set as public domain and free for any use.
This is a stand for an Inmotion V5F (electric unicycle or EUC). I am very happy with it and I have one at home and one at work. It keeps your EUC upright so it's easier to take and put back, and it looks nicer than having it just lying on…
This fan duct is designed for Snapmaker J1 parts cooling and heat break cooling. Cooling performance is improved by using a 5015 blower fan. *However, the cooling performance is slightly inferior to the previous version. But, cooling can…
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #0 (41.6mm) opening. This model has a 15mm extension on the front to allow better access to the controls of a given lens should it be required. This is modelled as…
now fits the new quick-lock system.
Das Model so drucken wie es in der datei liegt. Keine Unterstützung nötig. Print it like it comes laying on its back. You dont need support structures.
These plugs fit a 2022 Honda CRF250F and CRF125F Muffler so you can power wash the bike without flooding the exhaust. I printed them in TPU with 4 perimeters which may be slight overkill but I didn't want them to break in the muffler.
Soviet plane-fighter La-5fn. Chibi plane Print Settings Printer Brand: TEVO Printer: Black Widow Resolution: 0.2 Filament: abs ABS Category: Vehicles
This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are two Bosch fruit pulping attachment models that use this part : Fruit pulping attachment MUZ8FV1 , with Spare part: 0103…
For best durability, it is recommended to print them from strong materials such as ASA, ABS etc. These materials provide higher resistance to heat, UV exposure, and mechanical stress — ideal for automotive use.
Set scale at 1000 and enjoy your print) Sorry for bad photos i will add good soon
This is intended to replace the original battery lid on a LG 6710CMAQ05F remote control, which came with a LG hifi audio setup. Print instructions The overhangs are so small that they don't require support.
Printable replacement for Seat Leon 5F of luggage compartment floor cover handle - top part
My Denon turntable foot was missing. I replicated the part using another foot as the model to measure and replicate. The part is no longer available. I initially made one in PET-G and it worked but to get the dampening that was made with…
A cable wrap designed for the YPC110 USB Wifi Endoscope. (No wifi dongle). Since the app is no longer supported on iOS (at least) I no longer use the Wifi dongle. I only use the USB camera cable portion, which still works on Windows…
Simple 5015 fan duct for Matrix Extruder
Tweaked the size, added a couple magnet holes and resized them. took off the texture and added a quote from the band. I included a blank text model so you can add you favorite band quote. Magnets are 10 X 3mm qty 5 .2 layer height .4…
Sometimes it is the small things. This tiny little gear plays a very important role in making a Samsung M2675F Mono Laser Printer work. It is also bravely resistant to all attempts to glue or otherwise repair it when it breaks in half. In…
FIVE FINGER DEATH PUNCH logo keychain
I love CATIAV5FTW's jet engine model, but I am not a "fan" of the spinner cone. Modern jet engines do not have a similar pointy shape. Also, it was very difficult to assemble. I have an MMU3 so I am a big proponent of multi-material…
This is a model of a 1.5ft H Flume used to measure surface water flow. I believe I modeled this to 1:10 scale. You can find more information about flumes here https://www.openchannelflow.com/flumes/hs-h-hl-flumes and more about how they…
This is a replacement floppy eject button for the TEAC-FD235F floppy drive that can be found in the Amiga 600. There are 4 different models. One has a taper on the button which narrows slightly toward the end (like the original), the…
I've previously made a fixed mount for the Tobii Eye Tracker 5 for the Samsung Odyssey G7 G75F 40 inch monitor with 10, 12.5 and 15 degrees angle (…
A remix of the remix of the original stand. Very similar to Tmpx64's version, just with a simplified design for s cleaner aesthetic. Prints in place with minimal supports.
Box in two parts that fit together, in the shape of a rabbit 005f. With wall thicknesses of 0.8mm and a tolerance (space for interlocking) of 0.45mm. Each part, prints, the side with the largest flat surface on the print bed. ( does not…
5FDP Print instructions Category: 3D Printing Summary 5FDP Print Settings Printer Brand: Prusa Printer: i3 MK2S </div> Rafts: No Supports: No </div> Resolution: 0,1 Infill: 25% </div>
Replacement part for the Denon DP-45f turntable button(A) assembly. Part number 1138161302. I made this after the power button broke from stress on the plastic. I recommend printing in the orientation of the file for the strength of the…
Mounted Chisel Plow - 13 Shank 15ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Now, I'm lazy. And I don't like wasting power from devices being on when they don't need to. I also wanted to be able to power the lighting for my Prusa enclosure AND have capacity to upgrade to more powerful ventilation fans without…
Full instruction with list of individual parts for Seat Leon 5F 5F0071610/5F0071610A Aero Side Skirts Mounting Kit is not available to order separately without Side Skirts. Also Side Skirts are rarely available to order from the dealers.…
Cone Adapter 35 female x 58 male. Suitable, for example, for Metabo band saws and Holzkraft miter saws. My compatible extraction parts:
Makita miter saw dust chute for the LS0815FL model. Designed by hand-measuring the broken original part; it fits well, with no major differences compared to the OEM one. I printed it in PETG, with the wide side up at an angle so there are…
Case for CV5F clock. Print instructions Category: Electronics
I wanted to add some tracking functionality to my E-Scooter, and since I have an AirTag, that seemed like a good idea, so I looked for a design to help me get started. I took https://www.thingiverse.com/thing:4836701 as an inspiration and…
Version 5B - Original listing that uses layers for color changes. Used to print without a AMS or MMU. Version 5E - made it to accommodate the BAMBU AMS for the different colors instead of using layers for the colors. This uses a plethora…
HPC have outside perimeter/brim to help with perimeter sequencing and bed adhesion to prevent warping. LP Aft spool modified so the main bearing fits deeper, allowing for the use of spacer to change LPT forward/aft clearance. Spacer…
Small model stand for F5F model Backfire-2 To make it easier to work on the Backfire 2 on the workbench and to assemble it on the field, I have constructed a simple, small stand. The dimensions are adjusted so that the fuselage is…
Replacement gunpod clip for VF-25F Renewal Tornado parts. Grey is the original clip. Use whatever material you think you need to withstand use as the clip is already a pain to deal with. YMMV. Example was printed in Overture PETG…
Hey, so I did this thing. Recently I released my own branded Carbon Fiber Mast. I am basing an "ecosystem" of parts off the mast. Coincidentally, others can probably use these parts for their masts. Yes, giving away these for free does…
Uses the following: 2x M3x5x4 Heat Set Inserts 2x M3x6mm bolts 5x 7mm Total Length x 1mm Tail Length Pogo Pin For flashing please refer to this guide: https://github.com/pvvx/THB2 Leave a comment if you need a specific pogo pin length
A small tool for loosening the bolts that hold the outer light clusters for a SEAT Leon 5F
Quick and easy print for mounting the Tobii Eye Tracker 5 under the Samsung Odyssey G7 G75F 40 inch monitor. I wanted a solution which wasn't too fancy to print, didn't require any glue, screws or tape, was removable, and still allowed me…
Plain face plate 5F (5in/5) for RACKRPI 2U 19in rack. Compatible with Eurorack standard.
Ein Wandhalter für Bits 25 fach und Magnetöffnungen für 30x10x3mm Magnete 5x. Magnete Einkleben und mit Bits bestücken!
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
The buttons being replaced are the "Lifter", "Repeat", "Start" and "Stop" of the Denon DP-35 F I printed it in PLA on an Ender 3. By printing with the button faces on the bottom, this may create a lot of support structures, but the…
Two versions of a ball mount cover for the mouse ball in Dell PowerEdge 15FP rack console.
Fish tape holder that works with the Sy Pegboard hook system. Can print without supports!
doorclip/doorhatch for gorenje tumbledryer Model: d85f65t
I had an old Samsung monitor without a stand and a Dell 2005FPW stand whose monitor was dead. I tried printing https://www.printables.com/model/975959-repurpose-dell-monitor-stand-vesa-100-75-adapter and found it did not fit my stand :(…
Convenient cases for storing thermocouples in the original tool box.
The 18 liter sealed container from 5Five is IP67 rated, stackable and can store five 1 kg spools at once for drykeeping. I designed a silica gel bin and spool supports that fit the bottom profile of the box. Optionally a hygrometer holder…
This is a model of a TAZ if it had a 5 foot print area. It is based on a design I created from a friend telling me he built a 5 foot TAZ. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
Got this Honda CRF125FB for my kid and wanted to limit power until he's used to clutch, gears and power this bike offers. As this is newer model with fuel injection, designed this small part which can be easily attached to throttle body…
I have made a housing for pot's 6127V1A180L.5FS to attach to the RV30 gear box please see attached photos. this keeps the pot secure while wormdrive gear box is functional.
-Insert two 8 mm ball bearings. -Insert a 0.8 mm stainless steel wire, bend it, and attach the hook (3 hooks).
This is a versatile model of different belts that you can print using TPU on any 3D printer without the need for supports. The designs are user-friendly and adaptable. If you need more sizes or have specific requirements, just let me know…
Recommended Print Settings Material: PETG Layer Height: 0.20 mm Nozzle Diameter: 0.4 mm Walls / Perimeters: 4 Infill Density: 15% Supports: Required Support Placement: Build Plate Only Print orientation:
I needed to replace the power cable on my Denon DP-35F turntable. The old cable ended up being a little smaller than the replacement. So I designed a new cable clamp to prevent the power cable from being pulled out and damaging the…
Made these for my graduating homeroom! I was looking for a template to add the class number on, and these modular frames worked very well. Print at 45 degree angle for best results, although I doubt anyone is looking for these specific…
LG MS2595FISW door latch (lock). Analog of MFG63839001