Wyniki wyszukiwania: 5x1

Sortowanie

534 modeli

P
PrintablesDGA

Picture Frame (15x10cm)

Picture frame for 15x10cm pictures. In bottom there are two hearts. Frame printed from PLA Fiberlogy TruGold Material: PLA, PET-G, ABS, ASA etc. Layer high: 0,2 or lower Supprts needed

Pobrania
51
Polubienia
7
Ocena
0
P
PrintablesMiraculix

Bilderrahmen für Postkarte von 15x15cm

Ich habe eine Reliefartige Postkarte bekommen, diese kann demnach nicht in einen standard Bilderrahmen. Also habe ich einen konstruiert. Die Postkarte ist zwischen den beiden Bauteilen vorgeshen. Da meine eine faltbare ist habe ich etwas…

Pobrania
41
Polubienia
2
Ocena
0
P
PrintablesMartin Anzinger

cable gland for 25mm Cable (5x16mm2)

Cable Gland to my electrical distributor to protect my emergency power line cable.

Pobrania
41
Polubienia
2
Ocena
0
P
PrintablesCanlos

Simple 15x10 Picture Frame (Wall Mount)

Description A simple, easy to print picture frame for 15x10cm pictures. The frame hangs from a single nail/tack on the wall. Pictures can just slide into the slot on the top and then the frame is ready to hang. Print Settings I used the…

Pobrania
20
Polubienia
3
Ocena
0
P
PrintablesErikSi

141 Vorsicht: Spielende Zahlen! Suguru 15x10

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Pobrania
12
Polubienia
0
Ocena
0
P
Printableslenn.bur

Container approx. 10x15x10 cm

This is a small box, that I made. You can you it for anything, it has a size of 10x15x10 cm (+-2cm) The print doesn’t need supports, but the handle has to be glued to the lid. Happy printing

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesErikSi

142 Vorsicht: Spielende Zahlen! Suguru 15x10n6

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesPointNemo

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Pobrania
30 235
Polubienia
12 791
Ocena
4,9
P
Printableskunaa

M5 hex screw and nut (M5x10, M5x15, M5x20, M5x25)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
3261
Polubienia
112
Ocena
4
P
PrintableseSeL

Bed level test, 135x135, Creality Ender 2 pro

Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…

Pobrania
2643
Polubienia
151
Ocena
5
P
PrintablesMiguelitocaf

Cubo de calibración de 15x15x15

Cubo de calibración de 15x15x15mm

Pobrania
2405
Polubienia
10
Ocena
4,67
P
PrintablesRask

Gridfinity 5x1 Scissors Holder

Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.

Pobrania
1817
Polubienia
202
Ocena
4,95
P
PrintablesDerSebbler

Silica gel container, 250g, 65x140mm

This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…

Pobrania
1313
Polubienia
129
Ocena
5
P
Printables43D PRINT

Box 20x15x10 cm (no support no screw)

Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…

Pobrania
1225
Polubienia
320
Ocena
5
P
PrintablesBasementLAB

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff

Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…

Pobrania
871
Polubienia
156
Ocena
5
P
PrintablesDockGuy

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…

Pobrania
731
Polubienia
58
Ocena
5
P
Printablesddl.vnt

huge 15x13 pixel cube fidget

designed to fit in a prusa bed, could modify it to also fit bambu P or X series for now i just printed a 3x3 test piece and it's perfect, i'll print it full soon.

Pobrania
727
Polubienia
29
Ocena
3
P
PrintablesHexanizer

Stackable A4 (8.5x11) Paper Tray

An A4 paper tray with stackable tabs. No Supports. It's large, so you'll need a big printer bed!

Pobrania
718
Polubienia
69
Ocena
5
P
Printablesmaf

Sanding Block 115x140, slightly improved

I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…

Pobrania
642
Polubienia
109
Ocena
4,88
P
PrintablesBenBreaksThings

Gridfinity 8.5x11 Paper Tray (Letter sized)

In the scope of gridfinity and organizing a workspace, I noticed there wasn't a paper tray to go with all of my other office gridfinity prints. For those with large capacity printers, the whole model is available and could support…

Pobrania
637
Polubienia
39
Ocena
0
P
Printablesthelanlegend

Multiboard 1x0.5x1.5 Multigrid Snap Bin

Custom shallow-depth bin for Multiboard (http://multiboard.io). Using this one to conveniently hold small tools like a Leatherman multitool. Could use some iterating but will work until there are official 0.5 depth bins in the system.…

Pobrania
586
Polubienia
63
Ocena
5
P
PrintablesTomivol

Scharnier 80x55x16(7) L-B-H

Stabiles Scharnier in den Abmessungen 80x55x16(7) LBH Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill

Pobrania
564
Polubienia
207
Ocena
0
P
PrintablesSutschi

Monopoly Organizer | Tray | Inlay | Box | 255x125x37

Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…

Pobrania
519
Polubienia
95
Ocena
5
P
Printablesbggd.tiguan

Spurplatten / Wheelspacer 5x120 72,6mm

Das ist eine Spurplatte die für BMW Modelle mit einem 5x120 Lochkreis und 72,6mm Mittelloch Zentrierung. Zentrierung ist mit Spiel auf 73mm geplant. Alle Spurplatten haben ein 3mm Konus, wegen dem Konus an der Radnabe. Zusätzlich: 1+2+3…

Pobrania
471
Polubienia
12
Ocena
0
P
PrintablesBasementLAB

Ventilation Grille - Duct Cover 105x105mm / 105x210mm / 210x210mm / 210x105mm / Ø105mm - Griglia ventilazione a bocca di lupo

Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…

Pobrania
465
Polubienia
92
Ocena
5

vite m5x10 e dado m5 standard iso

vite m5x10 con dado m5 con standard iso, consiglio di stampare usando un pla+, senza inserire i supporti, e con un riempimento non inferiore al 40%

Pobrania
446
Polubienia
19
Ocena
0
P
PrintablesAntonín Kořen

Lego Technic panel 5x11

Compatibility with Lego Technik

Pobrania
420
Polubienia
58
Ocena
5
P
PrintablesGrey

15x15 test cube

This is a smaller 15x15mm test cube that can be used to monitor your overhangs and dimensional accuracy. It can also be used to test for retraction issues (under/over extrusion after retraction) and printing artefacts. Happy printing!

Pobrania
397
Polubienia
16
Ocena
5
P
Printablesaqf23

15x110mm Bike BOOST thru axle universal fork mount w/ .STEP (NEW V5)

It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…

Pobrania
386
Polubienia
58
Ocena
5
P
PrintablesWilliam3bit

Elegoo centauri carbon 2 poop chute magnetic snap in place 1.5x10-2.0x10mm_magnets

Elegoo Centauri Carbon 2 poop chute built from Bas's poop chute for the Centauri Carbon 1. I've flipped the model and lowered the chute entrance to ensure clearance for the power switch. With the new model uploaded 6/14/26 I've flipped…

Pobrania
374
Polubienia
39
Ocena
5
P
Printables43D PRINT

Box with handle 20x15x10cm (no support)

Box with handle - outer max dimension 204x170x112mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: M3x8 4x 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls…

Pobrania
367
Polubienia
103
Ocena
5
P
Printables43D PRINT

Slide box 15x10x3 cm

Slide box 15x10x3 cm Print settings 0,2mm layer 4 walls 30% infill no supports

Pobrania
312
Polubienia
28
Ocena
0
P
Printablesbggd.tiguan

Spurplatten / Wheelspacer 5x112 57,1mm

Das ist eine Spurplatte die für VAG Modelle mit einem 5x112 Lochkreis. gedruckt mit 100% infill die Spurplatte ist nicht im Straßenverkehr zugelassen!!! Nur zum Testen, welche Größe man an Spurplatten braucht, um danach zu wissen, welche…

Pobrania
299
Polubienia
13
Ocena
0
P
PrintablesKlaus Krämer

Dichtstopfen M25x1,5 / Seal Plug M25x1.5

Einfacher Dichtstopfen für eine 230 V Außenanschlussdose mit M25x1,5 Gewinde. Ersetzt die mitgelieferte Kabeldurchführung / Simple sealing plug for a 230V outdoor plug socket with M25x1.5 thread. Replaces the originally delivered cable…

Pobrania
279
Polubienia
12
Ocena
5
P
PrintablesAndrzej

Profil U 305x17x8.25mm

Profile "U" for LED Light Bar Prusa i3 MK2 / MK3 lighting. Fitted perfectly, it enters with a slight resistance. To avoid the bending of the profile from the LED heat, I recommend printing the element with 70% filling. The LED strip must…

Pobrania
275
Polubienia
11
Ocena
5
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.

Pobrania
268
Polubienia
20
Ocena
5
P
PrintablesOBA

M25x1.5 Blind Stuffing + Nut and TPU-Sealing / M25x1.5 Blindstopfen + Mutter und TPU-Dichtung

M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…

Pobrania
259
Polubienia
15
Ocena
5
P
Printablesdhiertz

Picture Frame 15x10

There are 2 versions of the frame one for landscape and one for portrait. It is a 2 part print. Frame and stand. I printed with 2 perimeters, 4 top and bottom layers. frame was printed in standing position. Supports recommended but with…

Pobrania
256
Polubienia
25
Ocena
0
P
PrintablesLegitHotPotato

Organizer 125x180mm (IKEA ENHET) bathroom cabinet

Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…

Pobrania
249
Polubienia
53
Ocena
5
P
Printablesbwmartens

Gridfinity 5x1 bin for Klein Tools 32500 11-in-1 Screwdriver

This loosely fits the Klein Tools 32500 11-in-1 Screwdriver. There is no lip for making it stackable since the screwdriver sticks up above the body anyway. UPDATE: Based on feedback, I've added a finger hole. Both models are available.

Pobrania
244
Polubienia
26
Ocena
4,5
P
PrintablesVinS

DIN 35x15 mount for 2020 V-Slot or T-Slot - Offcenter

Mount for DIN 35x15 Rail, It's offcenter by 5 mm to sit flush against the 2020 extrusions when using a 4mm corrugated plastic and 1mm VHB tape (two side sticky tape) I've added a tape spacer to position in the din rail to be able to stick…

Pobrania
241
Polubienia
69
Ocena
0

Bearing 15x10x4mm.

Bearing 15x10x4mm.

Pobrania
236
Polubienia
11
Ocena
1
P
PrintablesOrlando PB

Gridfinity Mega Woodworking Drill Bit Organizer (5x1)

Background: This design fits a 1x5 Gridfinity mount. This Model holds 3 of each common drill bit size, as well as a hex for each. Sizes in mm are: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10. There are also extra size 6 & 3.5…

Pobrania
232
Polubienia
69
Ocena
0
P
Printablesaqf23

15x110mm Bike fork mount (MAXLE) w/ .f3d (OLD DESIGN)

NEW V4, NOW UNIVERSAL!! It has been designed for a 15mm axle and 110mm space. Used with a RockShox SID Select+ 2020 Torque cap compatible ( THIS IS IMPORTANT ). The skewer must be inserted to secure the bike. I have been using it for…

Pobrania
227
Polubienia
35
Ocena
0
P
PrintablesJangy

RC Airplane Tire / wheel 65x19mm TPU

RC Airplane Tire / wheel 65x19mm for a 3mm shaft. Printed in TPU with no supports, outer wall 3, infill 10% and Cura infill pattern to concentric. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…

Pobrania
226
Polubienia
19
Ocena
5
P
Printablesfivedee

15x15 (Minimal Spaced) Kailh Choc Keycap

What Is This? There's a dire lack of FDM printable Kailh Choc keycaps that work on mininum spaced boards, such as the minimally spaced version of @kilipan 's excellent Zilpzalp . I wanted to fill this keycap void, and also design a keycap…

Pobrania
216
Polubienia
25
Ocena
4
P
PrintablesMartin_au

Vial rack for 4 ml (15x45mm) or 12 ml (~15x100mm) vials.

Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.

Pobrania
216
Polubienia
19
Ocena
0
P
PrintablesDSWoodworking

9mm Magazine Rack - 5x1

My friend asked for some organizers to store a variety of 9mm magazines in his gun safe. He wanted something compact that he could easily pull in and out of his safe. I came up with this model that accommodated the majority of his…

Pobrania
207
Polubienia
37
Ocena
5
P
PrintablesMelz.01

Bilderrahmen 15x10cm

Einfacher und minimalistischer Bilderrahmen für 15cm x 10cm Fotos. Je nach Foto kann das Standbein horizontal oder vertikal festgeklebt werden. Druck ohne Supports mit 0,2-0,3mm Schichthöhe

Pobrania
205
Polubienia
12
Ocena
5
P
PrintablesSchreibmaschine

Guitar Pedal Enclosure 85x110mm

This is an enclosure for guitar pedals. It comes with a blank panel you can put your own holes in, as well as a front panel I used on a Pepers' Pedals Overdrive. It is designed to fit boards made for the Hammond 1590BB size enclosure and…

Pobrania
200
Polubienia
56
Ocena
5
P
PrintablesWillyCKH

Cable Zip Tie Mount 15x15mm

Cable Zip Tie Mount 15x15mm To install, you may add double-sided tape or glue to the bottom, and then attach the cable with zip tie. This model doesn't require support to print.

Pobrania
195
Polubienia
18
Ocena
0
P
Printablesjosepilar

seasucker 15x110mm thru axle (boost)

These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…

Pobrania
192
Polubienia
5
Ocena
5
P
PrintablesVanDerPol

Knops 35X15 mm M5 innen & außen Mutter /Knops 35X15 mm M5 internal & external nut

Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter

Pobrania
191
Polubienia
8
Ocena
5
P
PrintablesEd Lcrd

Print-in-Place Hinged Storage Box (65x100mm)

Print-in-Place Hinged Box – No Magnets, No Assembly! Upgrade your storage with this fully 3D-printable hinged box , designed for print-in-place convenience ! The integrated hinges work right off the print bed— no assembly, no supports,…

Pobrania
187
Polubienia
17
Ocena
5
P
Printablesvitaprint 3D

Prusa MK4S Box - 165x130 mm

This is a perfect Box for your Prusa Spare Parts. Size of the Box Inner-Dimension: 165mm x 130mm x 70/170mm (2 versions available) You need folowing Screws to complete it: M3 x 30 = 4 pcs (for the Hinges) M3 x 35 = 2 pcs (for the Handle)

Pobrania
177
Polubienia
44
Ocena
4,67
P
PrintablesFVP1992

Gridfinity Fixed Socket Rails - 5x1

Gridfinity Socket Rail 5x1 Custom designed for my sockets and measurements 3/8" socket set - Metric - Kobalt 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 3/8" socket set - SAE - Kobalt 3/4", 11/16", 5/8", 9/16", 1/2", 7/16", 3/8",…

Pobrania
171
Polubienia
35
Ocena
0
P
PrintablesZultax

Real Threadboard Compatable 5x1 and 5x2 Gridfinity Storage Shelves

Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill

Pobrania
169
Polubienia
38
Ocena
5

M25x1.5 screwable plug for power sockets

Plug/cover for the threaded holes of the Mennekes 1419 wall mounted power socket or similar. Since it's scripted you can adjust the parameters to suit your needs or obscure application. Current configuration: Thread diameter: M25 Thread…

Pobrania
167
Polubienia
7
Ocena
0
P
PrintablesPepperoni Pizza

Screw M5x10 DIN 912 with a cylindrical head and an internal hexagon

Accurate M5 screw according to DIN 912. With “special” edge cut at the start of the thread for easy fit and assemble. Can do any other! 😊

Pobrania
166
Polubienia
15
Ocena
5
P
PrintablesZDeanzo

Compact Paint Stand - 40 Paints - 15x15cm footprint

Warhammer Citadel Paint Stand Was asked by my brother to create a stand for his Warhammer paints. His Instagram Page - https://www.instagram.com/theforgotten3rd/ 40 Paints can be stored in each stand. Sixteen of which are instantly…

Pobrania
165
Polubienia
33
Ocena
0
P
PrintablesSean Rogers

Essential Oil Roller Holder (5x1)

A very simple stand for 5 roll-on essential oil bottles. Fits the standard 10mL bottles. The example picture was printed for speed with 0.25mm layer heights. Print instructions Category: Organization Print Settings Printer Brand: Prusa…

Pobrania
161
Polubienia
17
Ocena
4,5
P
PrintablesVinS

Din 35x15 mount on 2020 extrusion T or V slot "reversed"

This is a quick mount for 35x15 din rails to be mounted in a 2020 extrusion. This is used for mounting my MotherBoard SKR1.3 and Raspberry PI to the back of my Ender5 printer.

Pobrania
156
Polubienia
24
Ocena
0
P
Printablesbeni

Gridfinity Alientek T80/T80p Tool Holder (5x1)

A 5x1 Gridfinity Box that fits an Alientek T80/T80P soldering iron and and up to four additional tips. (first model i made, any feedback is welcome)

Pobrania
153
Polubienia
41
Ocena
5
P
PrintablesShaman

Photo frame 15x10

photoframe 15cmx15cm Category: Decor

Pobrania
153
Polubienia
29
Ocena
0
P
PrintablesSGMedi

Hextraction 5x15 Board for smaller build plates

These two prints make up the 5-15 board from the native Hextraction source file, but break it into 2 components which are more manageable for printers with <300mm bed sizes. -final assembly will likely require glue to complete.

Pobrania
152
Polubienia
8
Ocena
5
P
PrintablesNuno Rodrigues

CADRE PHOTO 15X10

cadre photo std

Pobrania
151
Polubienia
10
Ocena
0
P
PrintablesBoopidoo

Pan & Tilt 15x15mm Camera

A pan and tilt for 15x15 camera. Tilt servo is 4.3g and pan servo can either be 4.3g or 9g. Servo arms to be glued into the arms. Camera can be mounted on either side of the servo, use MIR files for other side. Can be printed without…

Pobrania
145
Polubienia
32
Ocena
0
P
PrintablesNeumo

Hadley Collet Focuser M5x12 Remix

This is a rebuilt version of wigglememore's Hadley 1.25" Focuser Options to attach to the telescope body using M5x12 screws. This remix is intended to be used with the Hadley Neumo telescope The model is already oriented to print without…

Pobrania
145
Polubienia
9
Ocena
5
P
PrintablesWatchgravity

Centrifugal Fan 105x105 (suction)

I used this motor: https://www.amazon.com/dp/B0F21RW7MJ?ref=ppx_yo2ov_dt_b_fed_asin_title The screws to mount the fan axle and motor are M3 screws. I'd recommend get a M3 Screw set. I used a shitty Kingroon 3kps Pro, the print quality is…

Pobrania
141
Polubienia
19
Ocena
0
P
Printables3DesignsCH

Nine Men's Morris, Mills, Mühle - 175x175mm

I searched for the Nine Men's Morris board game to print, but couldn't find one. So I created myself one with Fusion360. Board size is 175x175mm, it can be printed on the Prusa Mini. There are two versions available (both use the same…

Pobrania
141
Polubienia
32
Ocena
5
P
PrintablesOscar Matthews
Pobrania
140
Polubienia
10
Ocena
0
P
Printablesrjorgenson

Hexagon A4 Paper Tray 8.5x11 (US Letter) Spacer

This is a small spacer you can put between the left and right side halves of the [Hexagon A4 Paper Tray - Modular Design](https://www.printables.com/model/57131-hexagon-a4-paper-tray-modular-design) to accommodate US Letter sized…

Pobrania
140
Polubienia
42
Ocena
5
P
PrintablesTorrid

Nut M15x1

Nut M15x1mm You need a 19mm key to screw it in.

Pobrania
140
Polubienia
1
Ocena
0
P
Printabless2sP

Gridfinity | Base: Skelet | 5x1 | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Pobrania
134
Polubienia
15
Ocena
0
P
PrintablesERiK004

Trash Can 15x15x15 cm

It's a trash can… there are some trash cans here, but they're all circular. This one should be easily modifiable to my specific needs, perhaps even for use as a storage container. I added a superstructure for larger basket contents. The…

Pobrania
133
Polubienia
21
Ocena
0
P
PrintablesThis_is_domiii

Distanzscheibe/Spurplatte 5x112

Distanzsscheibe zum testen, welche Dimension man bestellen muss. NICHT IM BEREIECH DER STVZO ZUGELASSEN! Nur zum testen welche Dimension an Spurplatte bestellt werden muss. Lochkreis 5x112 und mittenzentrierung 66,6mm. Passend für viele…

Pobrania
124
Polubienia
8
Ocena
0
P
PrintablesFrankWL

Festool MFT DIY Klemm Dog 25x10mm

ReadMe.txt Festool MFT DIY Klemm Dog Anwendung: Dieser Klemm Dog kann durch anziehen der integrietren Schraubverbindung fest mit der Arbeitsplatte verbunden werden. Die Idee ist nicht neu. Beispiele finden sich hier viele. Das besondere…

Pobrania
121
Polubienia
51
Ocena
0

Desiccant Container - SQ80x35x120

This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" -…

Pobrania
118
Polubienia
9
Ocena
5
P
PrintablesAlexander M

Lattice Box 185x110x110

A 185mm x 110mm x 110mm box Support Me - https://coff.ee/alexmi

Pobrania
116
Polubienia
17
Ocena
0
P

lego plate 5x10

lego plate 5x10

Pobrania
115
Polubienia
15
Ocena
0
P
Printabless2sP

5x1x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Pobrania
114
Polubienia
10
Ocena
5
P
Printableslordzurp

15x110mm thru axle bike mount

15x110mm thru axle mount, with clear holes for screws

Pobrania
114
Polubienia
16
Ocena
5
P
PrintablesKaktus22

Hubcap 5x112, VW Golf, Skoda Octaiva

Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.

Pobrania
113
Polubienia
21
Ocena
5
P
PrintablesStefan

15x110 thru Axle Mount for RockShox ZEB

Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…

Pobrania
110
Polubienia
17
Ocena
4
P
PrintablesLogai

Halma-Figure - 25x12mm

Small Figure for Board Games: e.g. Halma, ludo

Pobrania
106
Polubienia
15
Ocena
5
P
PrintablesV-Labs

Cable Chain 17.5x15x15mm

Make sure to set minimum perimeter width to 0.35mm, even if you have a 0.6mm nozzle

Pobrania
106
Polubienia
17
Ocena
0
P
PrintablesRayfor

M65x1.0 Press Ring

M65x1.0 Press Ring

Pobrania
105
Polubienia
3
Ocena
0
P

lego plate 5x12

lego plate 5x12

Pobrania
104
Polubienia
10
Ocena
4
P
Printablessworcester

1.5x1.5x6.5 mold box

Use the mold positive to make the silicone mold for 1.5"sqx6.5" rectangle, then use the mold holder as a reinforcement for the silicone mold. I use FS20 for the silicone and print the mold mother and holder out of PETg. Only need supports…

Pobrania
104
Polubienia
36
Ocena
5
P
PrintablesOBA

Corner Cover for 15x15 mm Cable Channel

Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…

Pobrania
103
Polubienia
16
Ocena
0
P
PrintablesByAdri

Makeup Organizer Stand Modular - 17.5x12 cm

Bring order and style to your vanity with this Makeup Organizer Stand 💋 Designed with a modern minimalist look , this modular holder keeps your brushes, lipsticks, and accessories perfectly arranged in one elegant space. ✨ Features: 💄…

Pobrania
103
Polubienia
17
Ocena
0
P
PrintablesJuroH

Cable Chain 1 and 2 side bended 25x10x10 inner QubeXY

length 25mm inner width 10mm width 18mm height 10mm two side bended one side bended no support use bridge 0.2 layer 100% infill

Pobrania
102
Polubienia
6
Ocena
0
P
PrintablesAstigmaticEye

MTB fork mount (15x110mm)

Printing recommendation: Perimeters 3min-6max Enable brim (5mm) Every bike mount needs to be printed at angle so It doesn't delaminate when force is applied. Adding support in slicer is not best solution so I added custom support for nice…

Pobrania
101
Polubienia
26
Ocena
0
P
PrintablesAleš Svoboda

Adaptér spojka M15x1 G1/2 (adapter, coupling)

CZ: Adaptér není vhodný pro použití ve vodovodním řádu, kde může být tlak až 6 bar, nicméně pro montáž za vodovodní baterii u sprchy, umyvadla či dřezu je možné ho použít (nízký tlak). Pro tisk doporučuji použít PETG (zdravotně nezávadný)…

Pobrania
100
Polubienia
7
Ocena
0
P
Printableshadessuk

iPhone 12 / 12 Pro Case - 15x15cm variant

This is the same as chttrs's variant with the top wall thinned to fit on a 15x15cm build plate. Be careful inserting the phone, or the sides are likely to shear off. This is a problem with the original model as well, so caveat emptor.

Pobrania
100
Polubienia
8
Ocena
0
P
PrintablesSPC

IKEA 15x15 napkin holder STORATARE

Napkin holder for Ikea Storatare napkins. It fits 15cm x 15cm napkins. You can store your napkins laying down. Just put them in place and they always lie , no matter how many you have left.

Pobrania
100
Polubienia
11
Ocena
0
P
Printablesgskollnau

Bonsai pot 32 hexagonal curved semi-cascade 135x135x80mm

Bonsai pot 32 hexagonal curved semi-cascade 135x135x80mm, support is necessary.

Pobrania
98
Polubienia
23
Ocena
0

15x11mm CRude Engineering Sugar Cube Speaker Baffles

3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!

Pobrania
97
Polubienia
0
Ocena
0
P
PrintablesMostly Flawles

Glove Dispenser for 75x124mm boxes

Brackets for box of gloves, a remix so it will hold boxes with dimension 75 x 124 mm. In the pictures, on the left my remix, on the right original for 60x120mm boxes. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Pobrania
96
Polubienia
10
Ocena
0
P
PrintablesMr.Spaghetti

Clamping Mitre / Miter Box for 25x11 Window Fly Screen Frames

This is yet another mitre / miter box but with a unique difference! It is designed to hold and clamp 25mm x 11mm window fly screen frames to allow for easy accurate cutting of the required 45 degree angles. I designed it with two guided…

Pobrania
94
Polubienia
10
Ocena
0