Liczymy pasujące modele…
A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
Compact case for Riden RK6006 power source V0.2B - one piece cover V0.3 - separate body and back cover (easier assembly) V0.3A - cover with banana holes distance 17,4 mm V0.3B - cover with variable banana holes distance (socket) 18,0 -…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
This model is a remix from Thingverse of “CoolDPS DPS5005 Power Supply” by jopereira , Original design . Model is designed for the rk6006 PSU module, I expanded the design to accommodate an internal power supply. Warning 230 Vac mains are…
Compact case for Riden RK6006 and DPS5005 module, perfect to reuse an ac adapter from an old laptop or other types of PSU. Required Material for the variable PSU: 8 self-tapping screws: 4/5 mm head and 3/2.5 mm thread with at least 1cm…
I needed a bench power supply and some research turned up the excellent Riden RK6006 and RK6006-BT (bluetooth). Found a new old-stock blower-fan in my stash and built an enclosure around the RK6006, the blower fan, banana jacks, dc-dc…
A tiny and portable RK6006 power supply with USB-C PD trigger input on one side and two safety banana plugs on the other. I marked this as a remix of this DPS5005 case because I pretty much copied the ultra-compact design, though it is a…
Box for the new Riden RK6006 power supply. In the back is XT60 connector for input power. I recommend using PET-G or ABS. Tested with only 0.4 nozzle, but I think 0.6 should be fine too. Modifications and upgrades are allowed and…
This is a simple, functional, angled case for the Riden RD6006 buck converter. Designed to take a 10mm power jack in the back. Vented for airflow. M3 5mm screws hold the back in place (example in photo 4 available from Amazon) Main body…
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
A semi accurate model of the popular RD6006 Power Supply. Use this to help model your own case like this one Includes STL, STEP Link to Fusion 360 file: https://a360.co/2QxLvUf Category: Electronics
This is a case for the RIDEN RD6006 variable voltage regulator. And a WX-DC2416 Power supply 36V DC 5A https://cutt.ly/69tJ8Ij The feet must be fixed with glue.
Printing Instructions: Layer Height: 0.2 mm for standard printing. Line Width: 0.4 mm. For Best Appearance: Use a layer height of 0.16 mm. * Grill.stl: should be printed without top and bottom layers, with 30% honeycomb infill pattern.…
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
I think it fits Riden RD6xxxx, I have a RD6006 Best PSU for this case is probably LRS-100-48 (I use LRS-75-24 becuase I already had it) Has room for a 40mm fan, unknown how to power it, Y-split the Riden-fan connector maybe. Also have…
Box for mounted power supply RD6006, RD6012, RD6018 (you have to drill the power supply mounting holes yourself) because not all power supply models have the same fixing holes. With HW-585 PWM Module Board :…
Due to limited space on my table I made a housing for my power supply that I can put on the floor. I added a step file if you want to adjust lower part to your small part. Update: I moved the power supply to the left to make more space on…
This is a vertical case for RuiDeng RD6006 lab bench power supply. It is designed to fit a power supply unit that comes with RD6006 from official AliExpress store (216 x 114 x 50 mm). You will need some other hardware, which you can find…
I wanted to have a case for my RD6006 power supply that included a DC barrel connector. So I remixed the excellent design from Alberto Nidasio to add said connector. As I had it opened in Fusion 360, I also modified it a bit to reduce the…
A case for the Riden RD6006. Designed around this model https://www.thingiverse.com/thing:4073986 Features: Modular front plate so you can optionally have front facing outputs for USB, XT60, Banana plugs or whatever you like. Modular back…
^ Title! Category: Electronics
I wanted a super small case for my RD6018 power supply that had a built in step-up converter but also allowed for direct input. This way i can plug a battery into the power supply and use it remotely as well. The components i used: The…
BOM: 1x 24V Led Power Supply (~200mm in length; max 205mm) example: https://www.aliexpress.com/item/1005004381821944.html 10x M3x4x5 Heat Inserts 1x IEC 60320 C14 male power inlet 1x SPST KCD1 Power Switch 4x M3 Rubber foot example:…
My view of case for RD6006 with an angle (25 degrees). Backside as hexagons for airflow and modular base for adding connectors for power. To ensure that the case is secured with the device, there is there is a hole for screw and nut.…
This is a basic, easy to print mount to modify your Jumbo Bulb with the Govee H6006. Enjoy I used ASA with 20% infill at .2 Invite me a coffee 😊 https://cash.app/$Galdooo
A small enclosure for a PoE injector and QC 3.0 charger designed to sit on top of the RD6012 PSU ‘kit’ sold all over aliexpress and banggood. PoE injector is nice to have from time to time and QC3.0 is useful doe charging devices and…
TS80 Soldering adapter for power supply case with USB QC3.0 output: https://www.thingiverse.com/thing:4521874 Very often when I need a power supply in my projects is also involves soldering, therefore, I have incorporated a QC 3.0 USB…
Install RK6006 power supply module into your eurorack. Model Selection: Choose the power module that best fits your needs: Without Output on Panel: A streamlined option for those who prefer a minimalistic setup without any external…
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different. After printing it for the first time, the top broke of like the original…
Tacoma 3rd Generation Blue Sea 6006 Holder / Bracket for Winch. Has a spare hole for the sensor. I recommend making it out of ASA or ABS. I made it out of PETG and it started warping over time. My ASA print seems to be holding up.
This piece can be fitted on any Riden 60XX powersupply to avoid excessive play when mountin it into the sheet metal case. Without, it wiggles around when unplugging cables or pulling(pushing on the knob. With the spacer it sits nice and…
20 degree base to use with https://www.thingiverse.com/thing:4552134 Category: Electronics
Simple small case for RIDEN/JOY-IT RD6006 or RD6012 Power Supply. Print instruction: To print position its back down to the printer bed.
Box + holder for power supply Riden RD6006 to mount it to shelf - still possible to move out. Holdes for tempreature sensor with spool in bottom Functional draft version DC socket ON/ OFF button
RIDEN PSU RD6006 - Case wall mount including additional PSU for with 24&12V DC Note case is hold to the wall mount via 9 X round magnets 10mm X 2mm Note the RD6006 PSU design got from Grabcad…
When I was replacing the window cowl, I found my BMW e46 Touring is missing one of the wiper arm nut cap (part no 8226006). Similar parts sold online would be at least GBP1~2, but we are Makers and I also would like to practice my CAD…
2.5U 19 inch rack front panel mount for RD6006 Power Supply (Joy-IT/Riden) These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Stand for the RD6006B per supply frontend: Print settings: Nozzle 0.4 Layer 0.2 Material: PETG (others are working too) Slicer Support Setting: Auto generate support, organic
This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need: 1x Riden RD6006 DC Power Supply 1x 48V 100W LED Power Supply 1x C13 Socket (or any other with…
DIY Case for RIDEN RD6006 with power supply. Sliced with simplify 3D. Manual supports in overhang locations. Print with opening for RD6006 on bed. designed to be printed split in half and assembled. Feel Free to customise have incuded…
Case remix for RK6006H, RK6006 and DPS Riden power supply with Modified case from DPS/WEL DIN rail case. The modified part of the case is the BACK side where I removed the DIN part and add place for USB trigger which you may glue it -…
Replacement Vitamix TQO Motor Plate Gasket Service Kit - 060065 Printed with TPU 95A 15% infill
Replacement ramp for the Vtech Tremplin Super Cascades Vtech Tut Tut Bolides 8296006 I use freecad and a python script to generate it, you can use the python script to ajust the ramp and connector, you need the…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
