Liczymy pasujące modele…
Got my son and RC car for christmas and he broke a body post so I measured another one and made this. Fits the DEERC 9206E from amazon.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
If you have an extended battery latch for using 3S batteries, the knob to lock the latch is a bit hard to reach. I made this knob fit the original knob and not get in the way of locking and unlocking the latch. You can super glue it in…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
Fits the Eero Pro 6E vertically for wall mount. Pretty simple mount but it fits the contours of the unit well. Lay flat onto the base of the model and it prints without supports in under 3 hours. I used PETG as it lives in the garage.
MODEL: ONLY IPHONE 16 PRO Cover to be used only for Iphone 16e Does not fit all other Iphones Print it with a soft material such as TPU or PETG You can avoid the supports and the brim Clean the plate well Hexagon design allows you to see…
Apple iPhone 16e case to be printed using TPU. I didn't find any so I decided to design my own. Now, I'm sharing it. This case can be customized with your own text or logo to make it unique. This is very easy ro do using your slicer…
the model for the iPhone 16e is not 100% accurate, because apple hasn't released the design schematics for it yet, but going off pictures and the regular iPhone 16 schematics I was able to create a model that was 99% accurate, the only…
Wall mounting bracket for a Google Nest WIFI pro-6e. Mounts to the wall using qty 2 #10 screws. The one shown is PLA, 3 walls, 15% infill. Facilitates the storage of excess power cord.
iPhone 16e and 17e TPU Case. Use snug support type, that's easy to remove.
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? On pictures you can see how it compares with iPhone SE2 (without case) & iPhone 16 Pro (with case). other iphone 16 series…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Birdhouse 16eme. I'd like to dedicate this…
Air Duct Anycubic Kobra NEO V4 is slip on secure with glue. V5 has a hole for a 2.85 x 11mm screw.
I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable. Made to fit hardware and allow final mount assembling after monitor is reassembled. It is a tight and…
📱 iPhone 16e Case – “AirFrame Minimal” A sleek, lightweight, and uniquely styled case for the iPhone 16e with a skeleton-like frame design. Perfect for users who want to protect the phone’s corners while showcasing the original look of…
Mesa 7i76E dins rail mount with Solidworks 2016 file This file is to be used with the din rail clip located here: https://www.prusaprinters.org/prints/64242-din-rail-clip
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
Diese Ausstecher in Form eines Sterns mit sechs Strahlen wurden so gestaltet, dass die Gebäckstücke leicht ausgestochen und ohne Probleme der Form entnommen werden können. Sie gibt es in den Größen 60, 70, 80, 90 und 100 mm. Die…
I remixed a UniFi 6E AP mount to work on Ikea Skadis. I saw another mount for this AP on the site, but it was not horizontal, which is what the radiation patterns on UniFi APs are optimized for (they are generally meant to be mounted on a…
Einfache Montage Benöigte Schrauben: -1x Linsenschraube M2x6 -1x Linsenschraube M2x14 -2x Linsenschraube M2x16 -6x Senkkopfschraube M3x10
This is a mount for the Eero 6e Pro. I wanted something that I didn't have to drill into my wall, use anchors, etc. I wanted to be able to mount it on the duplex outlet (not decorator style) and utilize it facing down. This made cable…
This is a wall mountable holder for the amazon eero 6E pro. It has plenty of honeycombed holes for ventilation and has supports on the back wall to prevent it from slipping. The device can get quite warm so these features should help to…
I had accidentally thrown away my Zagg alignment tool, so I modified @rox97 's to fit the Zagg screen protector. To account for the Zagg being quite a bit smaller than this was designed for I added some stand offs on 2 sides to help with…
I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…
Easy wall mount using screws or other fasteners. I printed this flat-side down, using PLA with three perimeter walls and 10% infill. Easy print with no supports required.
This is a static model (won't fly) of the popular classic wooden glider Ka6e. The model comes into one ready to use bluid plate. If the outer wing part is too difficult to print straight up, it might be a good idea to print it flat.…
Wall mount for Canon LC-E6E charger. Charger just slots in, 2 holes for countersunk screws. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 15%…
XLSEMI - XL4016E1 Based Buck Module
This is a simple wall mount for the Linksys Velop 6E Pro (model MX6200) nodes. Back of the mount has windows for power and Ethernet cables. The node locks into the base of the shelf and stays in securely. The shelf prints quickly without…
This is a replacement for the nr 2 (6 mm) comb, for the Babyliss Pro 45. I tried replicating the original as close as possible. I confirmed the 6 mm measurement after printing. Printed sideways with supports, at 0.1 mm layer height. This…
A corner bracket for a TP-Link Deco 6e (X75). I designed this using OnShape and printed it in white matte PLA.
The case is made for a cheap popular video surveillance board from Aliexpress (46х118mm 9CH NVR). To store the recording, I use an old solid-state hard drive without a case 65x42 mm. This model does not use screws. Assembly sequence:…
This is our ULTIMATE version of the well known dice game SIX OUT. It works with a larger number of sticks that can be placed on the field which also causes a higher risk factor. More strategic and fun to play. Enjoy this travel edition!…
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
Here is the awesome looking Philadelphia 76ers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
10% Infill seems to be enough for this model. I printed with Fillamentium White PLA. It seems to fit the Eero Pro 6E Mesh well and within an hour the unit seems to be cooler and the desktop is no longer hot.
Iphone 16E phone model 3mf accurate official dimensions
Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…
Philadelphia 76ers Logo - MMU
Kleben Sie den Henkel einfach mit Superkleber an die dafür vorgesehene Stelle an.
An iPhone 16e model MMU/Assembly print options Print it with 0.2mm or lower layer height. Everything snug fits. REQUIRES GLUE TO ASSEMBLE
Praktischer Stiftehalter für den Schtreibtisch
Choose your thickness, very strong with with 100% infill !
Lens hood for M.Zuiko Digital ED 40-150mm F4.0 PRO
10 inch Rackmount Ears for Cudy 16-Port Gigabit Light Managed Switch GS1016E
Philadelphia 76ers Oversized Necklace Logo that I designed. I hope you enjoy!
Rack mounting brackets for Netgear 16 ports PoE switch GS3166EPP, with a space for the Power Adapter. Use M3 threaded rods and nuts to keep everything together (although they might be unnecessary, since the brackets already click in place…
A Canon LC-E6E charger holder for the Ikea Skadis pegboard based on Stillwave 's Canon LC-E6E charger wall mount . I printed this in PLA and it works fine, holds the charger in the mount snug and is a good fit to the pegboard.
Remix'd to use brass threaded inserts (M3 x 5mm x 4mm) for the PCB mounting screws.
Protective Lens Cover for Mileseey TR256E Thermal Camera
A TPU iPhone16e case using Echer's Circle Limit IV (Heaven and Hell)
Hier habe ich 10 gestapelte Rohre mit den folgenden Maßen: Innendurchmesser: 20mm, Länge: 60mm. Gedruckt aus ESUN-PLA+ da diesen Lebensmittelecht ist. PETG eignet sich auch. Gedruckt wurde es auf einem Anycubic Mega X. Die…
Einfacher aber praktische Halter für deine Gewürze. Platz für 4 oder 6 verschiedene Gewürzgläser. 45mm Durchmesser, fast für jedes Gewürzglas passend. Gesamtbreite + Tiefe 4er: 190mm, 52,5mm Gesamtbreite + Tiefe 6er: 285mm, 52,5mm 2.-3…
Replacement for the Bumper of the RC-Car H16E from DEERC Mine broke so I had to design a replacement. While doing it I also stabilized the week-point which is in transition of the actual bumper & chassis of the car by making it thicker &…
PLA Füllung 100% Schichthöhe 0,1mm ohne Stützen, ohne Rand Würfel auf die 1 stellen, slicen und bei 9mm Pause hinzufügen. Mütter einfügen und weiterdrucken.
6 corner connectors for a box rain gutter Description : We have built a 6 corner garden house with a box rain gutter. But the corner connectors are only available as an optional accessory for a price I did not want to accept. So DIY…
Protective Screen Cover for Mileseey TR256E Thermal Camera
My 16 port switch was too wide to fit in the 10" rack but this seemed like a good compromise. I've included the FreeCAD file - it's a mess but hopefully it's easier to tweak that than to start fresh if you want to adapt to your own switch.
Just a small design inspired by the Decware DFR8 phase plug for the Fostex FE206En. This is not by any means the exact copy... it's just my model that i experimented on to sound quite nice Update Mid October 2021: i uploaded newer…
With passthrough cable hole exiting to the side. Just mirror the model in your slicer, if you need it to exit on the other side. Fits most cases, no need to take the phone out. 16e version added as well.
My dices: 16x16x16 mm Box inside dimensions: 51x36x16 mm Overall outside dimensions: 59x44x20 mm On the lid the word is "WÜRFEL" (German word for dice). I have some different dice, so I created a box for each 6 dice. One edition is with…
Voici un lithophane du vitrail de Zelda Windwaker. 6e modèle. Faites vous plaisir ! This is a lithophane from Zelda Windwaker’s stained glass window. 6th model. Enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Basketball klub Philadelphia 76ers tištěno ve vrstvách.
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e with a built in credit card holder on the back. The card holder holds 3 cards firmly. I have a version to hold 2 cards…
Even with the silicone mod protection at the seam, if the drip tray is not pushed all the way back, water can run behind the base plate and cause the Silvia to rust. This nozzle guides the water into the tray, even if the tray is…
Refined over two years of continuous testing and regular use, this modular system keeps your water clear by combining efficient surface skimming with safe, reliable foam fractionation. Key Features: Modular Flow Control: Features…
Multiboard Holder for Mileseey TR256E Thermal Camera
Wir haben in unser Wohnmobil eine zusätzliche Dieselstandheizung von Nordkapp verbaut. Um die Verrohrung der Nordkapp-Heizung mit einem Durchmesser von 75 mm zu integrieren, haben wir einen speziellen Abzweig-Adapter entworfen. Dieser…
Ich wollte meine Bilderleisten ohne sichtbare Schrauben an der Wand anbringen und ich empfand es als am einfachsten einen 40er Forstnerbohrer zu nehmen und einen Einsatz mit Führung einer Senkkopfschraube zu drucken. Ich habe dafür eine…
This is a single slot blower fan mount for the LSI Logic 9201-16e SAS HBA. Blower Fan: AVC BASA0715B2U 70x70x15mm (search ebay for these) I spliced a 3-pin fan connector to the fan wiring and adjusted the speed in BIOS Alternate(Not…
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the holder and/or logos then change at 13 mm. I added built in supports, so DO NOT enable…
I printed it in PETG with a nozzle of 0.6 ;)
The power line rail edge is about 12mm thick. M3 12mm bolts and nuts required. Original included Unifi bolts also working. The zip tie holes are little fragile.
I noticed that I have another car with the same chassis that has a battery tray that allows for velcro straps to hold down the battery. With the idea I might want to use batteries that will not fit the original tiedown and the tray from…
The power push button on my DX6e radio broke and I had removed it. Power on/off was achieved via a pinky finger press on a PCB button (not an ideal situation). This solves that problem and provides a more factory appearance. Print…
This was modeled for an iPhone 11 Pro to be mounted on a Philips 276E monitor This allows the iPhone to be used as a webcam. I printed this with the "H" shape laying on the plate, and used Cura's "tree support" for the overhangs, came out…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
Nedded several stands for radios onboard a vessel. Designed this in fusion to be a snug fit to make sure the portable radios is secured properly with no chance of accidentally falling out, even in violent vibrations and 90 degrees…
Uses 2 magnets. Can use MMU or pause print to do color change.
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
Usually, 300 mm calipers have longer jaws than the 150 mm ones, so my Mahr 16EX could not fit the ordinary holders. Print it with slanted side down, no support needed. I printed it with Esun PLA+, 2 walls and 15% grid infill. Caliper…
Be warned, this model is extremely Ehh, Good Enough™. The detail is minimal, measurements were taken with a $22 digital caliper, and I rounded all of the dimensions to the nearest 1/4mm, so a laser scan or micrometer precise model this is…
I wanted to use a custom body I found for another variant of my RC car. I have an H16E deerc which is an mjx hypergo clone. My car did not have the same mount points that the custom body needed so I modified this front shock tower to…
Easy wall mounting for your Worx Nitro WG186E Trimmer / brush cutter. Mounts to the wall with 4 screws. The WG186E trimmer slots in to the mount between the motor and operator handle. Two bumps are added on the top to avoid the unit…
Its pretty simple… It covers the light and that's it. In my several months of using it i have had no issues with temperature and it works great
Customized version of https://www.thingiverse.com/thing:4581618 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4581618 Instructions Using the following options: lensFocalLength = 400 lensDiameter = 100…
A LITHOPHANE OF THE PHILADELPHIA 76ERS
Pictures are of the first version I made. The file is an updated version, shortened the height of the entire mount and the length of the legs that hold the router for a tighter fit. Printed on a Snapmaker U1: .2 layer height Precise wall…
Replace the tokens for control with a Muscle car gauge.
Replacement electrical cover for the BOSCH Cooktop HT6ET60 (PKN675DB1A). I printed this with PETG and so far it seems fine. The junction box does not appear to get hot when the cook-top is operation. If anyone can suggest a better…
*******UPDATED 2/26************* I tweaked some measurements and added built in supports, so DO NOT enable supports in the slicer. For some reason after an update, I couldn't get PrusaSlicer to put in supports unless I painted them on. It…
The Böker 06EX227 and 06EX229 “tactical” balisongs have a lot going for them, but the best you can say about their looks is that they have an, er, Efficient Germanic Aesthetic. But since these are scales over steel liners, they're user…
Simplified model of: https://www.printables.com/model/1513148-tp-link-tl-sg116e-wall-mount-brackets
I was given a DEWALT 716E mitre saw, but the holes to fix it on its support were too big so I modeled spacers.
Presenting our meticulously crafted 3D model of a Pin Securing Cap, specifically designed for the SIMATIC S7 Bus Connector (6ES7390-0AA00-0AA0). This component is crucial for protecting the delicate pins, commonly known as "stopiki,"…
Focuser holder for TS Optics 76EDPH (Sharpstar) APO triplet Support for: ZWO EAF OnStep Nema17 Focuser My Astro focuser BOM 1x GT2 Timing pulley 40Teeth/Bore 6mm 1x GT2 Timing pulley 20Teeth/Bore 5mm 1x GT2-142mm Timing Belt size 6mm 3x…
It's just a rectangular prism with a hole chopped in it to fit a HON 176E cabinet lock, to clamp in a vise. Common wafer lock on HON file cabinets.
Removed the multiboard mounts, so it could be screwed to a wall. Removed the multiboard mounts, so it could be screwed to a wall.
******I haven't printed this yet. Will update pictures after I do******* I designed this to fit my iPhone 16e. If you want to change colors for the words and logos then change at 13 mm. The letters in "Space" are 1 mm taller than all the…
![OM system [olympus] 40-150mm f4 pro hood LH-66E](https://media.printables.com/media/prints/1069461/images/8090729_35f85adb-0d3e-46a5-94f7-218335812c81_aaac608d-69a2-4419-b038-27ff7b8aafa1/ca0eb003-61e5-40fe-901a-b40f26f077d8_1_105_c.jpeg)
