Wyniki wyszukiwania: 6x1

Sortowanie

334 modeli

P
PrintablesBram

Simple 6x1x2 #Gridfinity bin

Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…

Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu

Pobrania
573
Polubienia
40
Ocena
5
P
PrintablesAWSW

WordClock 2024/2025 desk holder/stand (16x8 & 16x16)

Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
15
Ocena
5
P
Printablesso meone

Fast Print fully parametric LED Matrix Cover / Diffusor made in Fullcontrol, tested with: 8x8 16x16 32x32

A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Pobrania
131
Polubienia
11
Ocena
0
P
PrintablesLibor Martinec

Nut M6x1

PETG matička M6x1

Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
93
Polubienia
4
Ocena
0

Dyspenser zaklejek Braterstwo W23 (Target patch dispenser - 26x12mm)

Dyspenser do zaklejek na przestrzeliny z dodanymi napisami i oznaczeniami strzelnicy Braterstwo W23.

Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
6
Ocena
0
P
PrintablesVelvia

Open 6x12, 6x17 and 6x24 Panoramic Camera

Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…

Pobrania
3965
Polubienia
528
Ocena
5
P
Printableskunaa

M6 hex screw and nut (M6x10, M6x15, M6x20, M6x25, M6x30)

nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Pobrania
2245
Polubienia
106
Ocena
5
P
PrintablesAWSW

WordClock 16x16 - 2024

WordClock 16x16 - 2024 This is the 2024 variant to the WordClock 16x16 model adding new functions and features as well as a new font as V2 variant. =) This WordClock 2024 variant covers mostly every input I got from users in the last 2…

Pobrania
2056
Polubienia
290
Ocena
4,81
P
PrintablesAWSW

WordClock 16x16 LED matrix

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Pobrania
1918
Polubienia
777
Ocena
4,94
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Pobrania
1844
Polubienia
1231
Ocena
5

PC4-M6x1.0 PTFE Tube Connector

I designed this M6x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the @suit1337 *Filament Guide Arm M6x1.0-version because the ones I found the hex was to big and obstructed/preventing the connectors to reach the threads…

Pobrania
1820
Polubienia
788
Ocena
5
P
PrintablesFlasheek

Fat Shot X - Multiformat (6x17, 6x14, 6x12, 6x9 and 6x6) 120 type film camera

Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…

Pobrania
1360
Polubienia
228
Ocena
5
P
Printablesfractalnoise

16x16 LED Matrix Frame with Diffuser Grid

16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…

Pobrania
952
Polubienia
134
Ocena
4,89
P
PrintablesBrom

16x16 LED matrix grid

16x16 LED Matric case Features: Fits standard 16x16 LED matrix Rear hidden power barrel jack Internal supports for panel Lots of space for dev board to drive the LED matrix Its designed to house a ESP32 or ESP8266 running something like…

Pobrania
800
Polubienia
93
Ocena
5
P
PrintablesAWSW

MAZE RUNNER inspired LED matrix clock (16x16)

MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…

Pobrania
757
Polubienia
150
Ocena
5
P
PrintablesMorten.Kolve

Remix of the 6x17 camera, parametric lenscones.

Remix of the open 6x17 parametric Fusion 360 file for lenscones with M65 focus helicoid parametric Fusion 360 files for lenscones with fixed focus helicoid (you decide on infinity, hyperfocal distance or your preference. minor tweak of…

Pobrania
641
Polubienia
71
Ocena
5
P
PrintablesD!nu

DIN Rail Endcaps for M6x12 Cap Screws

Since Jevermeister's holder refused to fit my DIN rail (standard 35x7mm) I decided to remix his models. I decided to go for the following changes: widened the profiled hole for the rail itself shortened them so they will not interfere…

Pobrania
622
Polubienia
53
Ocena
5
P
PrintablesFlasheek

Fat Shot 617 - Medium format 6x17 modular panoramic film camera

This is a film camera with modular design - cassette (film back), focusing screen, lens unit and misc accessories are detachable from the main body for customization, adjustments, movements and portability. It shoots panoramic photos on…

Pobrania
551
Polubienia
146
Ocena
4,5
P
PrintablesZapster

Frässchablone / Router Template / Corner Radius Jig (DeWalt 6x12mm Clamps Remix)

Remix of the great corner jig for routers by Woodenti to be usable with DeWalt guide rail clamps with a 6x12mm profile (see photos). The new holes are all-through, so that the clamps can be fully inserted. All files except for the…

Pobrania
525
Polubienia
171
Ocena
5
P
PrintablesINVESTEGATE

LED Matrix WS2812B ESP32 16x16 grid screen picture frame

UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…

Pobrania
517
Polubienia
174
Ocena
5
P
Printablesmaandren

Star Wars Lego 16x16 Base Plate

A 16x16 base plate with Star Wars cargo terrain to add detail when displaying mini-figures Category: Playsets

Pobrania
510
Polubienia
92
Ocena
4,67
P
PrintablesAWSW

WordClock 16x16 - 2025

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Pobrania
505
Polubienia
53
Ocena
5
P
Printablessixi

LED Matrix 16x16 - ESP8266 / Arduino - NeoPixel / WS2812b

A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…

Pobrania
438
Polubienia
86
Ocena
5
P
PrintablesMorten.Kolve

Parametric 6x17 V8 lenscones

See https://www.printables.com/model/401588-parametric-6x17-lenscones-for-v6-slide-in-lescones for instruction on use for different lenes. NOT TESTED! Only a update of the CAD files.

Pobrania
371
Polubienia
33
Ocena
0
P
PrintablesG-workz3D

M6X10 Bolt - Screw

m6 X 10 mm Bolt or Screw

Pobrania
368
Polubienia
16
Ocena
4
Pobrania
359
Polubienia
8
Ocena
5
P
Printablescz8pru

NUT M16x1.5

cable gland PG16 NUT

Pobrania
358
Polubienia
17
Ocena
5
P
PrintablesCorodius

Printable Cable Chain 16x12

Printable Cable Drag Chain, with 16x12 internal dimension. 45 Degree rotational limit per link for radius limiting. Suits standard 2 and 3 screw cable chain mounts, with inverted variants to mount either direction. This chain is designed…

Pobrania
337
Polubienia
32
Ocena
5
P
PrintablesPeyton Creery

Open 6x12, 6x17 and 6x24 Panoramic Camera Remix

Build: https://ph.creery.org/posts/2024-04-15_3DPrinted612PanoCamera/3DPrinted612PanoCamera.html You will still need the hardware from the original source: https://www.printables.com/model/99364-open-6x12-6x17-and-6x24-panoramic-camera…

Pobrania
335
Polubienia
52
Ocena
5
P
Printables1liminal1

16x16 LED Matrix Cube

Very simple, wire these LEDS; https://www.aliexpress.com/item/4001296811800.html?spm=a2g0o.order_list.order_list_main.89.21ef1802Wp91AO Along with an ESP32 to a 5v PSU, glue the panels together and you're done :)

Pobrania
316
Polubienia
65
Ocena
4
P
PrintablesAtaris

Energy chain - 16x11mm

There are several variants of e-chain. E-chain ends are compatible with all variants. Segments can turn to both sides (in photo down) Segments are turnable just to one side. Good for horizontal orientation of the chain. (second photo)…

Pobrania
308
Polubienia
29
Ocena
0
P
Printablesop00

Quarter LED Matrix Grid 16x16 for 32x32 Matrix

remake of another model. Added features. Dimensions 170mm x 170mm x 5mm (L x W x H) excluding dovetail counter-sunk m3 holes parts clearance (0.8mm) Features parts clearance dove tail for connecting the four pieces small inlet for the PCB…

Pobrania
285
Polubienia
45
Ocena
4,5
P
PrintablesShogo Warrior

16x16 WS2812B Neopixel RGB Matrix Case with diffuser

RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…

Pobrania
255
Polubienia
36
Ocena
0
P
PrintablesReine

DIN Rail Endcaps for M6x12 Cap Screws

This file is prepared for a Formlabs printer and have been tested on a Form3B+ with Grey v4 resin printed exactly as oriented in the .form-file. The .zip-file contains a .form-file you can open in PreForm.

Pobrania
248
Polubienia
33
Ocena
4,5
P
PrintablesJared Gudnason

Pixel Grid case for 16x16 matrix, esp32, wled

Second model published, but the first one i actually started to work on. Diffuser + box for a 16x16 pixel grid (available from BTF lighting). for the diffuser, first three layers are white PLA, then switched to black pla for the remainder…

Pobrania
245
Polubienia
59
Ocena
5
P
PrintablesOBA

M16x1.5 Blind Stuffing + Nut and TPU-Sealing / M16x1.5 Blindstopfen + Mutter und TPU-Dichtung

M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…

Pobrania
238
Polubienia
20
Ocena
5
P
PrintablesStaafi

Carbon brush holder cap M16x1

I needed replacement brush holder cap for my Hitachi hammer, but should fit any tool using caps with M16x1 thread. Should be printer with heat resistant filament like ASA or at least PETG. I printed mine in ASA with 100% infill and used…

Pobrania
233
Polubienia
2
Ocena
0
P
Printablesdmtinkdev

16x16 RGB Neopixel Matrix Stand

I wanted to build a nightbed lamp for my kid, but all the previous neoboard-related designs seemed designed to be hang on a wall more than to be used by a 5 year old... so I built a new frame with a wider bottom side. Instructions for the…

Pobrania
233
Polubienia
36
Ocena
5
P
PrintablesStanley

GT2 Pulley / Idler 16x12 Bearing 623ZZ

GT2 Pulley with 2 x 623ZZ bearings. Print instructions Unassociated tags: Rebel II Category: DIY Summary GT2 Pulley with 2 x 623ZZ bearings. Print Settings Rafts: No Supports: No Resolution: 0.1mm Infill: 80% Notes: nozzle: 0.4mm layer…

Pobrania
228
Polubienia
22
Ocena
5
P
PrintablesMorten.Kolve

Parametric 6x17 lenscones for V6 - Slide In lescones

parametric Fusion 360 file for lenscones with M65 focus helicoid parametric Fusion 360 files for lenscones with fixed focus helicoid (you decide on infinity, hyperfocal distance or your preference. Preset / check focus with a…

Pobrania
225
Polubienia
20
Ocena
0

Yet Another Smart Vent 6x12

For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent

Pobrania
219
Polubienia
9
Ocena
0
P
PrintablesTycho Design

M16 Screw Collection M16x16-M16x100 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M16x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…

Pobrania
208
Polubienia
29
Ocena
5
P
PrintablesPiotr W
Pobrania
204
Polubienia
27
Ocena
4,5
P
PrintablesEmoticon Fury

"Renzetti Style" Connectible 1-2-3 Blocks v2.0 \ Setup Blocks (M6x1 threaded version)

These are machinist 1-2-3 blocks, but they have 1001 uses for all sorts of fixtures, jigs and now with threaded holes they can easily be connected together like a building set to make whatever you want. 3D printed 1-2-3 blocks are better…

Pobrania
202
Polubienia
39
Ocena
0
P
Printablesnilslorand

Hexagonal Self Watering Planter (16x16x14cm)

Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…

Pobrania
200
Polubienia
72
Ocena
4,5
P
PrintablesAWSW

WordCalendar 16x16 - 2024

WordCalendar 16x16 - 2024 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…

Pobrania
188
Polubienia
38
Ocena
5

Screw M6x1 30mm

Screw M6x1 30mm

Pobrania
187
Polubienia
8
Ocena
0
P
PrintablesMorten.Kolve

Parametric 6x12 V2 lenscones

parametric Fusion 360 file for lenscones with M65 focus helicoid parametric Fusion 360 files for lenscones with fixed focus helicoid (you decide on infinity, hyperfocal distance or your preference. Preset / check focus with a…

Pobrania
186
Polubienia
18
Ocena
0
Pobrania
186
Polubienia
8
Ocena
5
P
PrintablesBURNTkoki

Nasa Fabric/Chainmail XL 16X16

No supports or brim, and print normally otherwise This is from my makeronline account, so please do not report, BURNTkoki, and this printable account is linked on makeronline

Pobrania
185
Polubienia
25
Ocena
0
P
Printablesbutchooka

Wordclock Wortuhr german + english, RGB 16x16 Matrix, ESP32 D1 Mini, Multicolour AMS ready (remix)

Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…

Pobrania
184
Polubienia
17
Ocena
0
P

Wortuhr - Wordclock - 16x16 - 2024 - German Version Only!

This is a remix of the German Version of the famous and great "Wordclock 16x16 2024" by AWSW (https://www.printables.com/model/768062-wordclock-16x16-2024). So if you need information about the hard- and software needed, please look…

Pobrania
184
Polubienia
9
Ocena
5
P
Printablesnroyer

Prusa CORE One - Belt tensioner pulley for 6x6x1.8mm M3 square nuts

The Prusa CORE One, like a lot of Prusa's machines, uses thin M3 nuts compliant with the DIN 562 standard. I needed to repair my belt tensioners but only had 6mm x 6mm x 1.8mm M3 square nuts available, the sort I could get in my local…

Pobrania
180
Polubienia
20
Ocena
5
P
PrintablesEdu_liz

Double-ended wrench organizer / Organizador de llaves inglesas (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm).

It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…

Pobrania
177
Polubienia
16
Ocena
0
P
PrintablesMacDaddy5

SCS F5 6x139.7 Center Cub Cap

I Designed this for a buddy when he showed me that they are selling for $25 on Etsy. added 2 little indents on the inside rim of the face so you could add an SCS sticker and then fill with clear resin to get a nice finish. i got my best…

Pobrania
177
Polubienia
6
Ocena
0
P
PrintablesShaun

Minimal cable clips for 6x1.5mm flat ethernet cable

I bought a super-flat ethernet cable thinking it'd look neater along the skirting board. Of course, it ended up being impossible to find cable clips for such a thin but wide cable so it snaked across the living room for 3 years. 3D…

Pobrania
169
Polubienia
17
Ocena
5

Yet Another Smart Vent 6x10

For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent

Pobrania
166
Polubienia
10
Ocena
0
P
PrintablesTycho Design

M16 Socket Head Screw Collection M16x16-M16x90 ISO 4762 / DIN 912

Collection of screws (ISO 4762 / DIN 912) including : M16x 16, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Pobrania
159
Polubienia
25
Ocena
0
P
PrintablesRP3D

Brembo 16X18 Brake Lever

Ready to print 3D model of the famous Brembo 16X18 brake If you print it, please give a feedback Thanks

Pobrania
156
Polubienia
14
Ocena
0
P
Printablesplanetar

Diffusor and cover for 16x16 WS2812b LED matrix

The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…

Pobrania
152
Polubienia
8
Ocena
0
P
PrintablesSimon Z

6x17 Camera by Velvia without darkslide (V8)

As I don't plan to use different cones on the camera and didn't want to risk any lightleaks I removed the slot for the darkslide in the lid and added a new arrow. Thank you Velvia for letting me remix your file!

Pobrania
150
Polubienia
12
Ocena
5
P
PrintablesHumpaPrinta

Storage Box for 76x10mm Cutting Wheels / Bosch GWS 12V 76

i've got a Bosch GWS 12V 76 angle grinder and wanted to store the discs properly including the allen wrench. this box will store plenti of 76mm cutting/grinding wheels AND the allen wrench provided by Bosch to change them. please let me…

Pobrania
149
Polubienia
27
Ocena
5
P
Printablespflug

M16x1.5 Junction Box Caps - NO support

Just a flat hat M16x1.5 screw with a 45 degree chamfer for easy printing. fusion360 included - modify you own :-) cheers

Pobrania
148
Polubienia
23
Ocena
5
P
PrintablesMrFlippant

MMU2 Selector large bore w/ 6x10x2 Magnet Mod

UPDATE 10/13/2019 - Added revised selector with pinhole to push out magnet for re-use in another print if needed. Also widened the bore entry points some more. I wanted all the features of the large bore remix (and all the features it was…

Pobrania
147
Polubienia
9
Ocena
5
P
PrintablesLegeiria

Lego inspired baseplate 16x16 circle| Fits HÄRLIGA bell jar[big version] from IKEA

This is a 16x16 baseplate circle inspired by lego. Great if you want to mount some lego on/in something round. I also made a 10x10 version: https://www.printables.com/model/865765-lego-inspired-baseplate-10x10-circle And a 11x11 version:…

Pobrania
146
Polubienia
10
Ocena
5
P
PrintablesDaTTcz

Držák LED Alu rohového profilu 16x16mm (LED holder Alu corner profile 16x16mm)

Držák LED Alu rohového profilu 16x16mm pro hliníkové rámy 20x20mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji

Pobrania
143
Polubienia
15
Ocena
0
P
PrintablesLinas 3D

45° LED profile end cap - Wires into the corner - 16x16mm

Standard round 45 degree LED profile end cap used for corner wiring. Has to be glued, doesn't hold otherwise.

Pobrania
141
Polubienia
26
Ocena
5
P
PrintablesTycho Design

M16 Set Screw Collection M16x12-M16x80 ISO 4029 / DIN 916

Collection of set screws (ISO 4028 / DIN 916) including : M16x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…

Pobrania
140
Polubienia
29
Ocena
0
P
PrintablesGermanDarknes

Sanding Block 76x140

Adjusted the size to use it with my sandpaper set from Amazon: https://www.amazon.de/gp/product/B07GWDBMWG/

Pobrania
139
Polubienia
13
Ocena
5
P
PrintablesHelium

6x12 40mm Pihnhole Camera

BOM (not affiliated): https://a.co/d/dOy1gLw - M3 countersink screw https://a.co/d/hLHdPuo - M3 threaded inserts https://a.co/d/0zlFWMG - 1/4" threaded inserts (tripod mount) https://a.co/d/5Ct8daE - M3x16mm thumb screw…

Pobrania
138
Polubienia
14
Ocena
0
P
PrintablesAndreas L

Brushless Drone Motor Adapter 12x12mm to 16x16mm

Use heated inserts (on motor side) to mount this adapter to your motor with 16x16 moutingholes and mount it to your frame with 12x12mm mountingholes. I used M2 inserts and screws to mount everything to the frame and M3 screws for mounting…

Pobrania
131
Polubienia
5
Ocena
0
P
PrintablesTobiVermeulen

Gridfinity Ruler/Zollstock 6x1

Joona's model was a little too small for my folding rulers, as was the finger recess. So I adjusted the model slightly.

Pobrania
131
Polubienia
10
Ocena
5
P
PrintablesShaun Doe

16x16mm LED-bar end-caps

Ends caps to fit in 16 x 16mm angled aluminium extrusions for LED-strips. The LED-bar can get warm, PLA is not recommended as a material to print with. Tight fitting - make sure your printer and extruder are accurate/calibrated.

Pobrania
130
Polubienia
23
Ocena
0
P
PrintablesGorilloneChad

Lego Brick 6x1

🧱 Mattoncino LEGO Compatibile 6x1 – File STL Stampabile Questo file STL ti permette di stampare un mattoncino compatibile con il formato LEGO 6x1 , ideale per costruzioni che richiedono una connessione lunga e lineare. La forma allungata…

Pobrania
129
Polubienia
25
Ocena
0
P
Printablesjoey

Prusa lack enclosure handles redesign to fit 20x6x1,5mm magnets

Just a little Remix to slide in the smaller magnets which are easier to buy of the internet. also slide in from the side. Also made the acrylic glas inserts 0.2mm thinner so 3mm glas fits in tight. Print instructions Unassociated tags:…

Pobrania
128
Polubienia
10
Ocena
5
P
PrintablesBrounch

Drone FPV adapter 16x16 to 20x20

FPV drone adapter with 16x16mm to 20x20mm mounting holes

Pobrania
128
Polubienia
11
Ocena
3,5
P
Printableslink270

m26x1.5 nut

I made this to fit a cigarette lighter power port replacement thing. The nut was needed to help hold it into the slot. It turned out pretty well and seems to hold just fine for what I needed it for.

Pobrania
127
Polubienia
3
Ocena
0
P
PrintablesDaTTcz

Záslepka LED Alu rohového profilu 16x16mm (Cap for LED holder Alu corner profile 16x16mm)

Záslepka LED Alu rohového profilu 16x16mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji

Pobrania
126
Polubienia
16
Ocena
0
P
PrintablesViet D

M6x1.0 Threaded Car Antenna

Thread size is m6x1.0. I ran a m6x1.0 nut up and down the threads until it was easy to turn, then I installed it. I changed my infill to 100% because I wasn't sure how strong the threads would be. Print Settings Printer Brand: Creality…

Pobrania
124
Polubienia
3
Ocena
0
P
PrintablesMarcel Frehe

16x16 pixel art in a frame or a box

This is definitely my biggest design project I've tackled so far. After a lot of trial and error it's finally finished and I hope I'm not the only one who has been waiting for something like this. I had seen the funny pixel art displays…

Pobrania
123
Polubienia
24
Ocena
0
P
PrintablesTycho Design

M16 CSK Socket Head Screw Collection M16x20-M16x100 ISO 10642 / DIN 7991

Collection of screws (ISO 10642 / DIN 7991) including : M16x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.…

Pobrania
123
Polubienia
24
Ocena
0
P
PrintablesOverengineering

Aqua scap Aquarium grid holder for moss and plants 16x16cm

The moss should grow outside the grid after a while. I will update the pictures in a couple of weeks.

Pobrania
122
Polubienia
35
Ocena
0
P
PrintablesAWSW

WordCalendar 16x16 - 2025

WordCalendar 16x16 - 2025 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…

Pobrania
114
Polubienia
13
Ocena
5
P
PrintablesBillKAROLY

V8 6x17 Ground glass frame

6These are two ground glass frames for Velvia's 6x17 V8 Panoramic camera. They are designed for homemade ground glass made from borosilicate 3d printer bed glass. Cut a rectangle 65mm x 175mm. Use some aluminum Oxide equivalent to 320…

Pobrania
113
Polubienia
22
Ocena
0
Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesRozzo

M6x15 Screw Bolt Hexagonal Head

M6x15 Screw Bolt Hexagonal Head

Pobrania
107
Polubienia
11
Ocena
0
P
PrintablesSpawny

16x16 LED matrix enclosure

This is a remix of the 16x16 LED Matrix frame from fractalnoise . I made some modifications required for my own specific use case and to improve the print quality of the back frame itself. I printed the model with PETG and added “mouse…

Pobrania
107
Polubienia
16
Ocena
5
P
PrintablesMikagu

Vallejo paint holder 16x17ml

Support for 16X17ml bottles. It is a little more robust than my older design for 30 bottles. LINK Adding the gcode files for reference, but I recommend to use the STL file and slice it yourself. I'm also attaching the LINK to the design…

Pobrania
106
Polubienia
15
Ocena
5
P
PrintablesAlex Supkay

Gridfinity Base for Tall IKEA Alex Drawer 36x116cm

This takes the original “ Slim Gridfinity Base for Ikea Alex Drawer " and modifies it to work with the taller 36x116cm Alex drawer unit by removing the spacer, some of the clips, and the two smaller base plates. With these changes it…

Pobrania
100
Polubienia
10
Ocena
0
P
PrintablesHackOnWheels

M16x1.0 Threaded Barrel Mount for Foam Blasters - For CAD Use

Designed to work with Worker barrels that use a threaded mount. Ex. Harrier & Seagull barrels. This may or may not be compatible with any other current or future barrels. These files are intended to be imported into your CAD program for…

Pobrania
100
Polubienia
12
Ocena
4
P
PrintablesJager

Miter box for cutting 16x16mm aluminum profile for LED strips

Miter box for cutting 16x16mm aluminum profile for LED strips. Angles 90°, 45°, 67.5° (130°)

Pobrania
99
Polubienia
52
Ocena
0
P
PrintablesArnaudTD

M6x1 cap nut for "Filament Dry box cheap and simple"

Custom part for https://www.printables.com/fr/model/634289-filament-dry-box-cheap-and-simple I've bought a cheap TPFE coupling kit for 11,99€ on Amazon. It include 10 M10x1 coupling, 10 M6x1 coupling and 5 meters of TPFE tube. Original…

Pobrania
99
Polubienia
14
Ocena
0
P
PrintablesJessie55

Open 6x17 Ground Glass Back and V8 lid mod (light tight)

Print the same as you normally would for the camera body and lid. The ground glass back will accept 2mm glass and be flush though you could likely use slightly thicker glass as the retaining clips should flex a bit. For light sealing use…

Pobrania
98
Polubienia
9
Ocena
0
P
PrintablesAnthony Brown

Camera screw M6X15

Customized version of https://www.thingiverse.com/thing:2749041 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2749041 Instructions Created with Customizer!…

Pobrania
95
Polubienia
5
Ocena
0
P
PrintablesMR2

6x12 Louver Passive Wall Register

Here's a 6x12 passive wall register I designed and printed while adding some ventilation to the 2nd floor. For a passive register PLA will work fine. If you would like to use this as an active vent register i would suggest using PETG as…

Pobrania
94
Polubienia
13
Ocena
0
P
PrintablesLuca Vascon

6x17 90mm viewer

These are the model and the fusion360 source. It works quite ok… It's a shell, overengineered and occupying a lot of space for a cheapo 0.45x optical addon. It's made for Velvia's 6x17!…

Pobrania
93
Polubienia
24
Ocena
0
P
PrintablesJmer

Open 6x12 Parametric Lens Cone with Open Camera Focus Helicoid

A friend recently asked if I could print for him an Open 6x12 Camera. None of the available lens cones had the correct flange distance, and I wanted to give him the ability to have some degree of focusing. I decided to combine the work…

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesYuriiS

Wordclock Multimaterial - 16x16 - 2024 - German Version

Printing Details The front plate, which displays the letters, is printed in place using two or three filaments: Black (or any other) filament Transparent filament White (optional) – This acts as a diffusion layer to ensure the light on…

Pobrania
92
Polubienia
1
Ocena
4
P
PrintablesCM 3D Printing

Wing nut M6x1

Enjoy and download

Pobrania
91
Polubienia
0
Ocena
0
P
PrintablesNick Feeney

Open 6X17 V6 separated STLs for Fujinon SWD 75mm f5.6

I decided to take the .step files and piece out all the components for the V6. The lens cone is specifically for the Fujinon SWD 75mm f5.6 lens. You will need to print a different lens cone if you do not have that exact lens.

Pobrania
89
Polubienia
9
Ocena
0