Boeing B-17G Wall Art
Wall Art Silhouette model of the Boeing B-17G. Adjustable size. I accept model suggestions or ideas.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
- Pobrania
- 149
- Polubienia
- 45
- Ocena
- 5
Liczymy pasujące modele…
Wall Art Silhouette model of the Boeing B-17G. Adjustable size. I accept model suggestions or ideas.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Needed magnet: squared: 5x5mm, thickness 3mm or rounded: diameter 5mm, thickness 3 mm
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.
A reference STL for the EMAX ES 3054 17g servo. All dimensions are approximate per my measurements using my own servo and the spec drawings. If you'd like the Fusion 360 source feel free to msg me with your email.
Two spray paint stencils for your 5.56/.223 Ammo Cans (or other storage containers)! - 55gr FMJ - 77gr FMJ More ammo can label stencils to come!
This is a simple adapter to fit the Xiaomi Mijia Lite monitor light onto the LG 27GL850. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Office
Included in the attachments is the parametric Fusion 360 design and the label design
Filament dust filter Print-in-place hinges and a reusable snap-fit lock. 1.2mm walls. Weight [Sunlu Matte Gray PLA] Instructions: Fill each of the container's halves with tightly packed filtering media; cotton, a sponge, fabric, or any…
Always perfect donuts 🍩🍩🍩 Very thin donut cutter with a diameter of 10 cm or 7cm. The cutter creates a perfect ratio between the size of the hole and the donut itself. Available in two versions: ultra thin wall - 0.4mm exactly 1…
The method of attachment remains the same as the original, with two zip ties at the back that run through the monitor's ventilation grill. mind the imperfections as it's one of my first models/edit ever and was put together with…
Introducing the ultimate addition to your organization toolkit: the custom-designed Gridfinity 3x3x6 bin, specifically engineered to store 25 of your 7g (0.24oz) Elmer's glue sticks. Meticulously designed for efficiency and aesthetic…
This is an ultralight mouse - 23g - based around the Razer Orochi v2 PCB with inspiration from the design by Optimum tech as well as the Zaunkoenig v2: https://zaunkoenig.co/ https://www.youtube.com/watch?v=xvz8KjCpdLE I used the…
This saves time preparing a 7 grams filter on a 58mm portafilter. Coffee is funneled into the center of the filter and a guide lines up your 41mm tamper straight into the coffee. I just tap the entire portafilter to settle the coffee…
## New changes in Version2 (this version) VS version1 (Version 1 https://www.printables.com/model/971423-ercf-v2-selector-mod-for-larger-28mm-17g-servo * In version1 servo arm cannot touch the filament block top hat to release brake. The…
version2 is now released https://www.printables.com/model/1006480-ercf-v2-selector-mod-for-larger-28mm-17g-servo-ver # ERCF V2 selector mod for larger 28mm (17g) servo ## What: for ERCF V2 enraged rabbit multimaterial system.…
A1 Mini Compatible This is a print & play no cut backplate mod and spacer for the New 3DS XL that allows for the use of a 5000mAh battery & Micro SD Card Extender which can be found on amazon, ebay, or aliexpress. This is the final…
Spacer height scaled down to 50% of original project.
30% infill, no raft needed, print upside down.
Height is 90mm and Supports are needed are optimized in the 3mf file - I recommend to keep the settings.
I purchased an Anker TM137G Wireless Vertical Mouse but the USB dongle was damaged. I verified that the receiver was working, and decided to try to make a replacement piece. I carefully removed the metal by bending the two pushed in tabs…
If you love espresso and a person that can't handle the caffeine content of a double shot then you probably know the pain of packing grounds into a 7g single shot basket. This tamp-through funnel directs grounds into the region of the…
My interpretation of Alberts amazing 247. I tried to stay as close as possible to his design, but as a matter of fact I am just using the lower fences in an unmodified form. And not all of them. No matter what, credits go to him. This…
1.654GHz antenna for weather sat reception. Pint the base with some infill and the tube in vase mode. Category: Electronics
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
Fits a little tight. might be able to print at 99% for an easier fit. I just hit it on with a hammer and it fit fine.
New Year's Eve Party Glasses 🥳 Overview: Celebrate in style with these festive 3D printable New Year's Eve party glasses! These playful glasses are perfect for countdowns, photo shoots, or any New Year's gathering that's full of fun and…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
Couldn't mount the monitor to my monitor arm and didn't have any spacers that I trusted so I made something better. WARNING: I'm not responsible for any poor mounting or damage.
Small paint mixing palettes perfect for last filament meters on the spool, available in 2 variants.
An adapter to use the C27G1 monitor stand with VESA compatible monitors. Recommended filament is PETG Printing Layer height 0.2mm Wall loops 6 Top shell layers 5, Bot shell layers 3 Infill 25% grid no support needed Additional needed…
Update 02.04.25: After printing off some gridfinity base plates I noticed that the chamfered corners of the actual bin sit higher than the base of the bin that I had modeled. As a result, these corners interfere with the baseplates…
funnel for 7gr lamarzocco basket (single dose)) work with 58mm Niche grind cup funnel is magnetized, you will need to insert 4*2mm magnets after printing amz ref of magnet used :…
27GL850 has recessed VESA mount, so you need standoff with 5mm thickness you need 4 pieces of M4x12mm or longer
I present to you a Electric Box Key, it weights only 3.17grams, and has a hole for a rope so you can hang it somewhere or tie with some other keys. The hole might get clogged by a little piece while printing, but removing it should be…
Flanged mount for top mounting FT17G servos in foam board RC model airplanes. Makes servo replacement easy and convenient using the included servo mounting screws. Designed to be hot glued into foam board. Works with Flite Test FT17G…
esn scoop nicht 1 zu 1 kopiert aber ähnelt sehr. ich empfehle den scoop mit PETG zu drucken.
Table cloth holder clips for Ikea table. - 7gr filament needed only - Print from PETG or similar - Print horizontal without brim - Layer height 0.28 - Hold strong :)
I made a military model. I referred to the MH-47G transport helicopter. Hope everyone likes it. To assemble this model, it is best to have glue, a file and a pair of pliers ready. Assembly Drawing Printing Instructions These components…
By default this model uses one single 8x3mm magnet. It works with press fit although feel free to add a little bit of glue for a more secure fit. I would not recommend using a magnet larger than 8x3mm.
As I am using a roasting/flamer tool, which attaches to the MSF-1a burner, the whole system gets very front heavy and does not support itself. So I was inspired by my other cooking torch, which has a nice stand and replicated the same…
100mm vesa mount for aoc 27G2, tested and works. only need 2 longer screws and 4 for the monitor/tv
nail thorough finger prank. need almost no supports, only on the back(not pointy) part! PLA, PETG,whatever-should work with tpu too! no assembly required!
Printing recommendations 2 wall give to the best structure and flexibility .2 mm in height works well 20% infill definitely supports are needed Please check back with the original model of you wish to use their settings Additional…
This mount made for Hikvision DS-2CD1047G2 IP camera. But will work for other models with same dimensions. I wanted to connect the camera to tiles on the wall, but didn't want to make holes in the wall. I didn't use original screws…
This is a custom bar mount adapter designed specifically for the Yamaha Tracer 7 and 7GT (2022–2024 models with the black plastic bar and color TFT display). It allows you to mount standard 31.8 mm (1¼”) handlebar accessories—such as…
A friend of mine required a spare wheel for his Siemens Technopower Hepa 1800. See below for machine and spare part details. This part is now in service for about 3 years on the machine. Note 1: It is highly likely that this parts fits a…
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
Custom iPod Classic Clickwheels & Center Buttons (5th–7th Gen) 3D printable replacement clickwheels and center buttons designed for the Apple iPod Classic. These models let you print your own custom replacements at home instead of…
A small SD / SDXC card case that folds like a book. Prints easy and gets the job done - two cards have a case and you can check what's on them through a window. Printing Notes Print in PLA or PETG No supports! 0.15-0.20mm layer Quick,…
Tube socket b7h mk2 design by Peterbjornx Instructions For more information see http://tkkrlab.nl/wiki/Tube_Socket Category: Electronics
Minimalist bumper designed for the STM32F407G-DISC1 development board. Initial insertion of the board is tight; slide the micro USB side of the board in first before securing the board under the two 1.5mm retaining tabs. Printed on Bambu…
A simple yet aesthetically pleasing design not something super extra n all .
Custom speaker mount designed to attach the Creative Sound Blaster GS3 to the monitor arm of the AOC CQ27G4X . The mount allows the speaker to be slid into place and securely mounted on top of the monitor , using the existing monitor arm…
An extremely lightweight filament clip that weighs less than 0.7g! Depending on your printer, this will be a 2-5min print. Remix of (the Classic Variant):
Print with highest detail. I used the SR and 0,4mm nozzle / 0,1mm layer. Use supports where needed The bold works fine with a torx bits. Break off the pin AFTER mount. Its just there to make it easier to hold it.
I needed good mount place for a navigation for my Yamaha Tracer 7GT 2022. Looking onto what place there is and what I need, I decided to create mountable adapters allowing to install standard 12mm bar so some kind of navigation or other…
Switch designed for people with limited movement to operate communication equipment, toys and other electronic equipment. [Spanish] Pulsador de fácil accionamiento para facilitar el acceso a otros productos adaptados para personas con…
I had some ProModeler DS100DLHV micro servos laying around and wanted to use them in my Mini Crosswind. The servo trays are slightly bigger than the original so you will need to trim some foam to use them. They're 1mm wider and 5mm longer…
Bed level test that double as a 23/25 20mm target airsoft/air rifle/(nerf?/:maybe if you can hit it) can easily be scaled to fit different sized beds. make sure to scale Z to have a minimum of 3 layers fit wanting to use as a target.…
A box for a 7g package of Dr. Oetker yeast. Use double-sided tape, a Tesa hanger, or a screw to keep your yeast always at hand.
This should be printed in vase/spiral mode with no bottom. Uses 0.7g of PETG including waste.
Can be used as a replacement pin or as an extra when doing modifications to the control box.
Compatible With Dimension One Neck Flex Jet Pillow Carrier Rail, 2 Needed. DIM01510-607G
Use 3mm heat set inserts to attach PCB. attach mount to case with 2 sided tape or similar. Pinouts: 5 HDD LED + 18 HDD LED - 19 PWR LED- 20 RST GND 21 RST 22 PWR 23 PWR LED + 24 PWR GND Break out board (25P 1mm pitch)…
For LS055R1SX04 5,5 Zoll 2560x1440 on Aliexpress https://www.aliexpress.com/item/4000163557010.html?gatewayAdapt=glo2deu&spm=a2g0o.9042311.0.0.27424c4dBMjizs You have to buy option 2 with glass and the straight cable It is important to…
Univerzální držák na YOYO pro dírkované nástěnky Skadis od IKEA. Lze využít i jako držák na DUCT TAPE, nebo KABELÁŽ.
Oraganiser for packets of 57g clay.
a simple mount to clip your microphone above your monitor. PETG recommended
The magnets I'm using are cylindrical. 4mm in diameter and 1.5mm high. Simply add a pause in your slicer at height 124, then put some glue down, add the magnet. Once the glue is set, resume the print. I printed using 0.1mm layer height…
A wall mount for 5 227g gas bottles. Use it for example in your camper or your garage/workshop. You can use 3 or 4mm screws. I printed it in petg. Leave your thoughts in the comments.
Z shrinkage calibration the other tall thin cross model on here had a tendancy to wobble the taller it got which threw off the reading caded this up to help me calibrate Z shrinkage for my gantry parts can be scaled any direction, taller…
Layer Height : 0,08mm Walls : 4 Infill/Wall Overlap : 35% Supports : No needs
for vts 7gramm basket, you need for it 41mm tamper
cover for the power led of the monitor. It might work on other aoc monitors which also have their led in the center. Happy printing >-<
Motivation This is an addon I created primarily for my AOC U27G4R monitors. Having some light behind them feels much more comfortable especially when using the PC at night. I use a BONTEC triple monitor VESA mount and I liked the idea of…
Clean up your desk and upcycle your empty snack cans into the ultimate pencil holder! This Modular Honeycomb Ring Matrix is an eco-friendly project designed to snap empty Pringles cans together into a heavy-duty, completely expandable…
Hello everyone! Meet MIKADO! — a toothpick-style micro cleaning tool (now featuring an ergonomic grip!) designed for USB and USB-C ports, smartphone speaker grilles, audio/video jacks, stubborn JST connectors, or any other device and…
Small, lightweight, and designed to make everyday tasks easier! Meet the Compact Scraper: a practical 3D-printed tool weighing just 7 grams . Its compact design makes it easy to store, carry, and keep within reach whenever you need it.…
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
Filament dust filter Print-in-place hinges and a reusable snap-fit lock. 1.2mm walls. Weight [Sunlu Matte Gray PLA] Instructions: Fill each of the container's halves with tightly packed filtering media; cotton, a sponge, fabric, or any…
Small paint mixing palettes perfect for last filament meters on the spool, available in 2 variants.
Height is 90mm and Supports are needed are optimized in the 3mf file - I recommend to keep the settings.
Hi! Im coming to you with my cool (imo) way to hang our vinyl records ! This hanger wont let your vinyl fall, it has screw and and nut. thanks to this you can take off vinyl record whenever you want! I hope you guys will like my project!…
I made a military model. I referred to the MH-47G transport helicopter. Hope everyone likes it. To assemble this model, it is best to have glue, a file and a pair of pliers ready. Assembly Drawing Printing Instructions These components…
cover for the power led of the monitor. It might work on other aoc monitors which also have their led in the center. Happy printing >-<
An extremely lightweight filament clip that weighs less than 0.7g! Depending on your printer, this will be a 2-5min print. Remix of (the Classic Variant):
THE Ikea SKADIS Clip. This Clip for the Ikea Skadis Pegboard takes only 3.7g of filament per clip, and Prints in 11 Minutes. Its a small design, fitting perfectly into the Ikea SKADIS Pegboard. Printing it in PLA is ok, PETG/ABS is…
Hi! Im coming to you with my cool (imo) way to hang our vinyl records ! This hanger wont let your vinyl fall, it has screw and and nut. thanks to this you can take off vinyl record whenever you want! I hope you guys will like my project!…