1571 modeli
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Eine Wand Halterung für den Makita Akku-Rasentrimmer DUR181 . Präsentiere stolz deine maßgefertigte Wandhalterung für den Makita Akku-Rasentrimmer DUR181! Diese elegante Halterung wurde mit PETG-Material gedruckt und verfügt über eine…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
Wydruk około 3,64 €–4,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Logitech G810 Keyboard Stand/Foot Printed in PLA - should be fine Print instructions I chose 0.1 layer height for more detail on the slope Supports just for the pins
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
Crank protector for shimano M8100 and SLX675
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Made a remix of the streamdeck mount for my Logitech G815 keyboard. Fits pretty well, but lacks a bit of fricton on the keyboard "claw" when pressing the outer left or right buttons. Printed on Prusa Mini+ with PLA on its back (like in…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
A better tap for the Smoby rainwater tank. The original tap breaks of very easy (mine did). My design uses a more rigid knob. I only designed the inner part, you can remove the original inner part very easily: After you unwind the tree…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The simpliest LCD Neopixel wheel holder there is. Used for Neopixel LED ring WS28128B
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
No Supports Required Print Time: Approx 10 Min Printer Used: Ender 3 v2 with a 0.6 mm Nozzle Printer Settings 0.3 mm Layer Hight 2 Walls Speed 80 mm/s
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
This is a replacement part for a Volkswagen Gold 1998 (Cabrio) We had the original seat grip broken off, it's used to change the drivers seat inclination. As this is my first 3D model I ever made feedback is most welcome. I haven't…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What am I looking at? Just a simple chain guard. I bought a new bike that had this piece missing for some reason. Available files for download I uploaded four different files: A . stl file, containing the model. Two . gcode files, both…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little box to reuse PCO1810 caps (soda bottles cap). Only 1.6 grs of plastic about 0.5m. Print in vase mode in less than 10 minutes.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Thanks to the great work of steffanders , I was able to design a configurable bottle with a PET closure. The height and diameter of the bottle can be adjusted. I have created three example bottles, and more bottles can be created through…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional Fits FCC ID SHKASCEHB9
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Modular 45x 17 mm WS2812B LED segments i.e. for WLED . The bases are designed with 45° steps stands to be able to light your object how ever you need it. It is designed to be printed with minimal filament which leads to a not so sturdy…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with Support at the upper ring. Includes a slip ring - you have to break it free after printing.
Wydruk około 2,06 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand for storing the Duxtop 8100MC induction burner upright. Created to save some pantry space.f
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Description This is a custom-designed, 3D-printable replacement pusher pad/plate for industrial bottling conveyor systems. It was modeled from scratch to serve as a functional alternative to the rigid stock stainless steel pusher pad (…
Wydruk około 6,03 €–7,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model of the motorized carriage 810 commonly used by the czech railways. The model size is H0 (1:87), suitable as a wagon or motorized carriage for model railways. Read more at…
🟦 Zetor Crystal 8145 🟦 !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts black 15 by MrHanjak…
Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Here are my first 810 Drip Tip designs. The spiral one is designed to prevent spitting. The gun barrel one is just for refining the blank one. I included a step file of the blank Drip Tip so you can add further designs. Have fun :) If you…
This model is compatible with the lego system.
Collection of Gridfinity basic cups height 11 (81mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This model is compatible with the lego system.
This model is compatible with the lego system.
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. The wagon in the picture was printed with a Prusa i3 MK3S+ with 0.4 mm nozzle. The CAD files were…
Brick-Flexi-Gator and Flexi-Gator-M81-Remix If you like it --> press like it :-) Would be happy to see your makes ;-) Remix of Flexi-Gator https://www.prusaprinters.org/de/prints/55973-flexi-gator from Julia Ebert . Worked Print in Place.…
81mm mortar round used for L16 81mm mortar.
Minimum settings for fastest print !Very fragile! 0.3 layer height 2 walls 2 top&bottom layers 10%infill (i used Cross Hatch)
This model is compatible with the lego system.
Introducing the most accurate representation of the m821 mortar I could muster from tracing drawings from publications and looking at reference pictures. I was extremely pleased at some users who had printed my old mortar files and even…
MLmodel Tatra 815 VT - Tires TPU profil Tento profil slouží pro vytisknutí pneu This profile is used for printing tires Tiskový profil pro pneumatiky pro Tatru 815 VT - Filament TPU Economy/Sunlu od 3dfox Tire print profile for Tatra 815…
[ENG] Tatra 813 is a Czechoslovak special heavy off-road truck, produced between 1967 and 1982. The basic representative of this type series was primarily the military version 8×8 KOLOS, which was capable of pulling trailers up to a total…
I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
⚫ Tire and Wheels UPDATE ⚫ I don't like interfering with an already released model. Therefore, this update is standalone. If you choose to print this update, don't print these parts at zetor 8045/8145 Zetor 8045:…
Valorant protocol 781 knife. Scale to your need, share your makes and i like trains . ''GAIA'S VENGEANCE MELEE VALORANT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not…
I needed a desiccant container that was both small and strong enough to throw into an ammo can with bulk loose ammo. There are many desiccant containers but most are either too fragile or designed for certain dimensions that did not meet…
This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow. It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot…
This model is compatible with the lego system.
This model is compatible with the lego system.
⚫Zetor Crystal 8111⚫ Zetor crystal 8111 + new details update for all crystals !!! I guess no one expected it, not even me, but I decided to improve the crystals after so many years. What's new in the update? ▪ The sides where the door and…
PCO 1881 neck finish standard threaded PET bottle cap. This nozzle works on most soda bottles like Coca-Cola, Mountain Dew, Fanta, etc. Disclaimer: This cap is meant for non-food applications unless manufactured in a material labeled by…
Case for Arducam OV9281 and similar cameras. It requires 4 4-40x5/8" screws to secure the camera inside the case.
This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…
This model is compatible with the lego system.
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
Ferrari 812 Superfast Wall Art Easy to print . Of course you can scale it the size you want. Easy to print for up to 110cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided…
Wallmount for Makita DJV181 Jigsaw
Important: This fits the Wera 818/4/1. Wera makes several models that look similar but have slightly different geometry. Please check the model of your screwdriver before you print. The fit should be snug, but not too tight. Slightly more…
A collection of 12 810 "Goon" styled drip tips.The different versions of each has small differences in design :-)
This part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting a GPS module on a SpeedyBee Mario 5 frame. If anyone knows what filament SpeedyBee actually uses for their yellow parts please…
This model is compatible with the lego system.
This model is compatible with the lego system.
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
This is a jig that can be used when soldering round SMD mounted WS2812 LED using 24 AWG Magnet Enamel Wire I created this jig to assist me in soldering magnet wire to pre-populated WS2812 LED assemblies. The jig will hold the LED in the…
This model is compatible with the lego system.
This is my custom design for battery holders for 38120 LiFePO4 Battery cells.These parts can be used to make any arrangement of 38120 Cells in any series or parallel configuration! For my specific project, I made a 4S 8000 mAh battery…
A PCO 1881 bottle cap, fits for most soda bottles and other bottles alike (Coca Cola, Fanta, Mountain Dew, Pepsico, etc. I dont have a printer myself but i used standar tolerances, let me know if it fits well. All feedback is welcome!…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A rotating base for turrets, pan-and-tilt mounts, launchers, and swinging arms. The ring gear opens to an 81mm inner diameter. A thrust bearing stack carries the ring, so it takes the radial load from the ring itself and the lateral push…
Lego Technic rim inspired by the Volk TE37. This wheel is compatible with tyre 81.6 x 44 ZR (23799)
Model of Tatra 815-7 (Force) in scale 1/10. It is just base model ready for adding more details.
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
This model is compatible with the lego system.
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…
I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…
This component allows using water bottles / carbonated soft drink bottles to build homemade filters. The threads on this design were created using information from this specification . Overview There are 2 common standards for plastic…
A switch compatible with / comparable to LGB R5 (18050 / 18150). These only work when your running live steam or battery operated locomotives ;-)
Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a 81 slot 25mm Screwdriver Bit box I designed to replace two smaller containers. The top lid is connected by push fit to the base, no pins or tools required to assemble. Edit: I have added updated STL's with the correct print…
This is a simple model of an 81mm Mortar, L16. Prints fairly well in a larger size with FDM, not much needed in the way of supports. Enjoy Category: Props
70A Filaflex Black Ultra-Soft, 1,75 mm By Mirdos
Ce porte canette (double) pour BMW E87-81-82 est parfait pour combler le petit vide poche inutile de nos voitures, Étant destiné a être mis dans une voiture, je conseille fortement de l'imprimer en ABS (ou tout autre matériaux résistant…
a seal is needed for the pet bottle, I use the pet bottle, which serves as a pressure vessel, keeps the pressure up to about 4BAR na pet lahev je třeba těsnění, použávám k pet lahvi, která slouří jako tlaková nádoba, udrží tlak do cca 4BAR
The model is updated with better fit screws. A replica 81mm mortar ‘roughly’ to scale. no hardware needed, just some glue. Those savvy enough will notice certain pieces are not consistent with the same specific round (The fuse and body…
This model is compatible with the lego system.
