Liczymy pasujące modele…
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Not sure where my key was lost, but I made this to allow me to change settings on my Hakko FX-951 soldering Station. It will probably work on other Hakko soldering stations that use this same key. When printing this use 100% infill, since…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in generic PETG at 0.2mm layer height without any supports, 5 perimeters, and 20 bottom solid layers. Write in the comments and post a make. Thank you and enjoy!
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
Wydruk około 13,20 €–16,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Art Silhouette model of the Ducati 959 Panigale Corsa Superbike. Adjustable size. I accept model suggestions.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
I wanted a thin case for my 7in display. This is about as thin as it can possibly be. Has cutouts for some of the parts on the board so it can mostly lie flat against the PCB. It also has holes in the back for a vesa mount. I used this…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Flush cover for a pool skimmer. Replaces the original part with a flush version. For situations where you want to cover the skimmer, to make sure that no downwards pressure on the skimmer can happen. Avoids constant water splash on the…
Wydruk około 8,36 €–10,22 € nettoWstępna wycena jednego wariantu
After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original cap provided with the Wolfcraft 4195 precision knife frequently fell off, which inspired me to create a more secure replacement. This process eventually led to the design of a new grip that firmly secures the cap and offers a…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Winner, 1952 Grand Prix of Switzerland, driven by Piero Taruffi Piero Taruffi, a native of Rome, studied industrial engineering and showed potential racing motorcycles, but wouldn't achieve success in competition until after World War II.…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
This model replicates in every detail the Porsche 356, driven by Jacqueline Evans, of English origin, in the 4th Carrera Panamericana of 1953. All exterior liveries are a memory of Eva Peron.
Wydruk około 7,20 €–8,79 € nettoWstępna wycena jednego wariantu
Tisk opět na dvě poloviny s podpěrami, tryska 0,4, PLA.
Wydruk około 3,72 €–4,54 € nettoWstępna wycena jednego wariantu
Slightly reinforced and remodelled from scratch to be able to print. PLA, 50% infill. Supports needed and included in gcode. The hole in the middle might require slight filing to sit perfectly on the axle.
Použití například na vizitky Use for example on business cards
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
I designed this plate to attach larger labels to the stacking bin. Can be printed without support material and clips quite easily to the container. The plates for the 1930 and 1950 models are different. Here you can find the 1930 model:…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena jednego wariantu
On a Yamaha PSR S950 there is nowhere flat to place other items such as your phone, mixer or whatever else. However, there is plenty of space above the build in speakers. In my case I use external speakers anyway so I created these…
Wydruk około 5,28 €–6,45 € nettoWstępna wycena jednego wariantu
BMW 503 1956-1959 Coupe
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
I need a pods for my van to contain the audio speakers, it doesn't have slots in the doors so I made pods for them. projected for Pioneer TS-A10955 4" only support YES material prusament Petg
Wydruk około 8,37 €–10,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Or any other bottle of diameter 81
Wydruk około 3,77 €–4,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
Model description The Embraer E195-E2 is a narrow-body medium-range twin-engine jet airliner, that can carry up to 146 passengers, manufactured by Brazilian aerospace manufacturer Embraer. It is fitted with two underwing-mounted Pratt &…
See https://www.amazon.com/MMOBIEL-Airplane-Helicopter-Compatible-Raspberry/dp/B09BZTRSDP/ref=sr_1_2_sspa
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I was noodling around with organizing cables and came…
I was unable to find what font Bambu Labs Uses... so I Re-created The P1P and X1-Carbon Logo's to the best of my ability. Please note that these logos do not belong to me, but if you use them in your projects or designs, I would…
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA In the quaint town of Bellissimo, there was a charming Fiat 500 named Bella. With her vibrant red paint and retro design, she turned…
a model of the T95 tank, its really hard to print, so its better to make it smaller. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 30% Category: Vehicles
Various rotors for MG995 servos. Models includes a 1, 2, 4 and 6 leg rotor. Options are also included for holes on the legs to mount components to the servo rotor. Fits are meant to be very tight in order to hold up to the force the servo…
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
Replica of a Z95 Headhunter at 1:270 scale. There are two Versions: The standard Z95 is based on its most common appearance, especially in legends. This starfighter has many different versions, so you might be familiar with a different…
Bambu Studio settings tuned for eSUN TPU 95A. After loading the .3mf there is setting changes in all 3 sections which interact to produce the end result. If you just use the comparison charts to make your own adjustments please still…
Based on a 3d model. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.06 Infill: 25% Filament: --- PLA Black Category: Vehicles
This model is compatible with the lego system.
Following the example set by nemokeine the holes in these have been enlarged from 3mm to 4mm for an easier time getting the 95 paracord through armourcraft's models. 95 paracord is thinner than the more widely know 550 paracord. Shown…
Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…
This model is compatible with the lego system.
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
Remix of @Matija_272939 's model on Printables Comments on the original Printables model flagged issues with the rear guard not fitting properly. Some of the comments suggested scaling the rear clip to 95% fixed the issue. I modified the…
Con este modelo de torre de temperatura podrás realizar los cambios de temperatura de una manera fácil e intuitiva, ya que está diseñada para realizarlos cada 50 capas de impresión. Utilizando el comando M104 S…. ¡Y la temperatura a la…
This model is compatible with the lego system.
This model is compatible with the lego system.
Print using Dynamic Quality (0.16mm) with 30% infill. The servo horn is an exact fit, different printers/settings will affect the attachment to the MG995 servo. Otherwise, additional force/tools may need to be used.
Update: Modified handle model!! The model on Printables was missing the lock that holds the spool sides and the center together. I have uploaded a new model with a cutout for the lock. Aktualizace: Upravený model držadla!! V modelu na…
Visit the original page for more detailed instructions. I used any screws and bolt I could find to assemble it. Be prepared for a lot of sanding. I used plastic boxes/trays to emulate the spring as the original poster suggested. I don't…
A small, easy-to-print bracket to help reinforce cracked dashboards in 95-98 Chevrolet trucks
This model is compatible with the lego system.
Attention These lamps are very challenging to print, they consume almost 1kg of filament and take 4 to 5 days per print . Do not start a print without preparation . Print a test model for both, the top section of the lamps and the bottom…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
Originally published here: (WIP) Samsung Galaxy S8 g950 case by tato_713 - Thingiverse Thanks to the user pictorf for testing the test case for this phone. This test case was made for the regular Samsung Galaxy S8; for the S8+ see this ;…
This model is compatible with the lego system.
A mazda Miata body to be used with open z V16 chassis, it comes with a 90mm wheelbase, using screws fixation. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
This model is compatible with the lego system.
Please like the model if you download it. It helps. Thanks! 3D print and assemble your own Ferrari 375 F1 1950. The first Ferrari to win a Formula 1 Grand Prix. There are over 70 to print. They are all included in the zip file In order to…
This model is compatible with the lego system.
Retro Moped Assembly Kit 1950s Inspired Mini Scooter Model This is a 3D printable retro-style mini moped assembly kit. The model is designed like a small plastic model kit. Each part is arranged on a frame, so you can print the plate,…
Gripper lamp based on a toy gripper like you see at fair grounds. (The final model is slightly different from the photo.) You also need: Bulb E27 95mm LED. E27 fitting. (38mmø) Screws M4x10. M3x10 for thumb screws (knobs). Thread rod M3…
This model is compatible with the lego system.
I found that even a slightly smaller spool, like the Sunlu 195mm diameter ones, was enough to cause the AMS to occasionally over-tighten when loading and unloading. There are other spool adapters for much smaller spools but nothing I…
This model is compatible with the lego system.
1956 Ford F100 Pickup - Stylized 3D Print This is a high-quality 3D printable model of the iconic 1956 Ford F100 Pickup . Designed with a clean, stylized look, it’s a perfect project for classic car enthusiasts and makers alike. Key…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. This is a 1:25 scale 1950-style Gas Pump…
Plateau tournant D195x27 monté sur roulement 608ZZ (D22 d8 H7) Le roulement est facilement trouvable dans les magasins de skate, roller ou sur le net en utilisant la Ref 608ZZ ( https://tinyurl.com/r6swn5r9 ). PLA Remplissage 10% Couche…
This model is compatible with the lego system.
Found this file in one of my model download files from back in 2014 and thought I'd post it. I checked first to see it handn't already been uploaded here on thingverse and see that it has. The only difference I can see with this model is…
Citroen type H Truck year 1952 scale 1:34 CitroSupports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
Plegable FFP or N95 mask case. No supports. Easy print. If pin don´t fits perfectly, glue (with cianoacrilato if possible) the plain side of the pin into the hole. Recommended 0.24 mm layer height. Includes .f3d file. Proved on PLA and…
Description This is a switch blank for a Golf Mk1 dash. Specifically, I designed this for the pictured area of my 1991 Cabriolet, above and below the hazard and defrost switches to the right of the instrument cluster, but it should fit…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Citroen type H Camper year 1952
Revitalize your Logitech MK295 keyboard with our Replacement Keyboard Foot. Durable, easy to install, and specifically designed for seamless compatibility. Say goodbye to instability and rediscover smooth typing! Print Settings Printer…
For Samsung Jet 75/85/90 accessories.
Blank cover for the VW Polo 6N1 or SEAT IBIZA, INCA, CORDOBA
This is a simple temperature tower for PLA restricted to 195-220. Printed with Cura Post processing to change the temperature 2% infill
This is a remix for Extrutim's TPU/Flex Cable Zip Tie. Thinner, shorter version. The original version is fine but I found it rather rigid when printing with TPU95A. It is also longer than I need. I remixed it to a more suitable version.
This is a grenade inspired by the Grenade container (the threading is similar but I don't think they are interchangeable) and the modern Swedish hand grenades SHGR90 and SHGR2000 hence I call it SHGR95. Apart from the design of the…
Replacement side latch for Stanley rolling workshop / toolbox. Stanley part number: 19500300 It fits my Stanley STST18631 toolbox and other models as well. I printed in PLA with 15% infill. As of May 2025 it has held for ~3 years and is…
A pulley hub for F695-2RS bearings. The overall width is 9 mm. May need tiny amount of support on the bottom surface, but might not be necessary. Can print in whatever material you want, this part shouldn't be near any of the heat of a…
This model is compatible with the lego system.
Gridfinity model for the Metric version of the Wera allen keys.
This model is compatible with the lego system.
Citroen type H Foodtruck year 1952 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
k vond dit en leek me leuk voor op printables
IMPORTANT!!! - If you do end up printing this, be sure to print the baffle (the part the speaker mounts to) with a relatively high infill percent, if not entirely solid. Or you could have at least 6-7 exterior walls. When you go to mount…
This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA BMW Isetta (1950) The BMW Isetta, introduced in 1950, is an iconic microcar that holds a special place in automotive history. Designed by the…
Modelo a escala de la Ferrari 553 de 1954
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Resolution 0,12 Infill 100 % Supports Yes
Gumová palička, doporučuji tisk v orientaci jak můžete vidět na obrázku. 35%+ Infill HONEYCOMB, 5 layer, stromové podpory doporučené, experimentujte s hustotou výplně pro vámi preferovanou tuhost a váhu, každý si najde to své, 75% už…
![#0195 Charging Cable Organizer [Multiple Sizes]](https://media.printables.com/media/prints/1167729/images/8797425_e01454a6-8f70-4158-87bb-164bded8b240_40e80181-6dde-4f5d-8a71-7f370698d27a/rl-20250127-015.jpg)
