Wyniki wyszukiwania: ali

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Alien - Xenomorph - Full Figure - 25 CM

How Xenomorph is made - https://youtu.be/Upa737w-dKQ

First layer test 60x60 mm square / Z calibration

First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG

Creality K1, K1c, K1 Max & K2 SE Door Hinges Geared Print in Place

Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…

OLD VERSION! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…

Creality K1 - Door Cover

For this build, you will only need 6mm wide foam tape. Different foam thickness files are available. I recommend to use at least a 2mm foam. With less than that, it will be hard to have enough compression for a good seal. PLA should be…

Alien

As a huge alien fan I made this standing alien sculpture. It is print in one peace. My first try is 10cm tall. It came out petty well, just 2 fingers broke… I'll try out a bigger version soon. In addicinal I'm working on another pose, if…

Minimalist Duplo - Brio, IKEA, Wooden Train adapter

Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

Creality Tool Case - Standard Ender Tools

A small holding case of the standard tools provided with most entry level printers (EG: Creality Ender series). Good for on-the-go storage for quick simple maintenance on most 3D printers. Side 1 holds: Clippers Screw driver 4x spare…

Cali Cat Keychain

It is pocket version of original Cali Cat (The Calibration Cat) for a keychain. Length/Width/Height: 19mm/28,5mm/35mm

Gridfinity Caliper Holder - Low Profile Space Saving

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…

Minimalist Designer Bowl

A beautiful minimalist designed bowl. Simple and timeless at the same time. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…

Motherboard Fan Mount Mk2 Collection - Creality K1 Series

I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…

Creality Space Pi - Air Vent Gap Spacer

Creality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air. This traps humid air inside the dryer, making it hard if not impossible to…

CALIPER CENTER DISTANCE ATTACHMENT - (Tested)

The must have tool for your workbench !!! Only 3,52 gram's !!!

Duender - 2X Creality Ender-3 CoreXY convertion

OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…

Caliper Holder (2 versions)

Two versions for Countersunk screws 3 mm or 4 mm Enjoy printing! I am open to your suggestions and feedback and look forward to seeing your 3D creations.

EcoGrid - Minimalistic Gridfinity Base

The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…

Tête de cheval – Sculpture réaliste 3D

Cette sculpture 3D de tête de cheval représente l’élégance et la force de cet animal noble. Le modèle est conçu avec des détails réalistes, allant des oreilles expressives à la crinière texturée. Impression : Convient aux imprimantes FDM…

Skull Pop Can Chalice

Skull Pop Can Holder / Chalice.

Aliens / Xenomorphs small and beautiful

I would like to share with you little cute monsters 😉

Alien Tablet Stand

The original alien figure was modeled and shared by thingiverse user Icenvain. Thing: 2039374. I used Tinkercad's sketch tool to sketch the hands. I used Meshmixer to sculpt it into a new shape. Print this at 80% to 100% for a phone…

The Infinity Pen Holder: A Minimalist Organizer

The Infinity Pen Holder is more than a simple desk organizer. With its clean, minimalist design inspired by the infinity symbol, this unique piece is the perfect blend of form and function. This model helps keep pencils, pens, and other…

Among Us - Dead or Alive (Improved)

alpokemon did a great job modeling the outside shape of the 'Among Us' characters ( https://www.thingiverse.com/thing:4595212 ); however, the joinery I felt could use some improvements. I changed the Legs, Heads and Guts. The major…

Small Fast Test Cube - Small Fast Calibration Cube 1cmX1cm 1g of filament! 0.5m!

Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…

Radius Gauge for Digital Calipers

A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…

Christmas Lantern for LED tealight

The Christmas lantern consists of two parts, which are printed in place. The inner part can be rotated so that the LED candle can be placed inside the lantern. The snowflakes are embossed in a way that allows the light from the candle to…

Alien - Xenomorph - Full Figure - organic support test

Alien - Xenomorph - Full Figure - support test from twitter joseph prusa account original from https://www.myminifactory.com/fr/object/3d-print-alien-xenomorph-full-figure-25-cm-82660

Ultralight One-Piece Whirlybird

There are already a number of hand-powered helicopters entered in the Make It Fly contest (like this , and this , and this , and this and this ), so why add another? Well, I was intrigued by these new toroidal rotors (all the cool kids…

Realistic Poodle Model

This is a cute model of a poodle that is easy to print. it is super realistic. How to print: To make this model more realistic you need to use a fuzzy skin, here are the fuzzy skin parameters: Fuzzy skin: Outside walls only Fuzzy skin…

cali dog (calibration dog)

test the quality of your prints by printing a cali dog

Hypnotic Extruder Visualizer - Kinetic Art - Optical Illusion - Mandala

Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…

Realistic 3D Printed Feathers

These are here for you to make fantasy feathers! of any colour, texture, size, etc and they will look quite realistic. I think they would be cool on great big hats, giant cosplay wings! Or costumes and capelettes or creature puppets!…

Kivuli tealight

Check out: my Instagram to see the tealight Print with a low temperature (195C) to avoid stringing otherwise standard print settings. Made for tealights with 39.5 mm in diameter

The Unholy Six Tealight Collection

The Unholy Six Collection A collection of legendary horror icons from the 80s and 90s – now immortalized in plastic. Six figures that turned nightmares into blockbusters – and now peacefully hold a tealight. printed on Prusa Mk4 and Bambu…

Ultimate Ender 3 Bed Level Calibration Grid (ABL workaround)

Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…

Digital Caliper Holder

This is a holder for digital caliper. 26/01/2023 - NEW UPDATE - if you want to hang it with tape, I added a .3mf version without holes for screws. If you have the analog version click here for the model

Gridfinity Caliper Stand

This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…

Creality Ender 3 dog (aka Niko the Puppy)

The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…

Minimalistic Nintendo Switch Pro Controller Stand - non-slip design

Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.

Minimalistic PS4 controller stand

I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…

Caliper attachments for measuring distances between hole centers

Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…

Ryobi Laser Cube Alignment and Leveling Stand for Garmin Approach R10 Golf Launch Monitor

This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…

Elegant tealight

Very easy print. Standard print settings, just dry your filament and print at 200 to avoid stringing.

Oversized Armchair for Sylvania Family and Calico Critters

Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Extrusion Multiplier/Flow-Rate Calibration for PrusaSlicer

This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…

Pegboard Caliper-Holder

I was missing the hooks for the Pegboard ( http://www.pegboard.perfonet.de/de/das-pegboard/ ) I am using. size: 120 x 60 x 0,5 cm perforation: Ø7 mm hole spacing: 25,4 mm Source: https://www.tinkercad.com/things/gd2YuYFwI4F Print…

Burj Khalifa 828mm tall,high detail, scale 1:1000 3Dmodel

Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…

Heating System for VW T6.1 California Ocean

So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…

Skeleton Hand Planter / Tealight Holder

This versatile design can be used as a small planter for succulents, or a dramatic electric tealight . The design features a realistic skeletal hand cupping a sturdy. Avoid using regular candles with flames, as they can melt the PLA.…

Zelda Healing Fairy

Zelda Healing Fairy.

Minimalist Passport Book Cover/Case - Travel Essentials

Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…

Snailien (snail-alien xenomorph mashup) lawn ornament

This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…

Hydraulic Disc Brake Alignment Tools

Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…

Burj Khalifa

As the largest building in the world, I also wanted to include it in my collection. There are already some models, but I thought I'd give it a try. In the end, it wasn't quite that easy. In 1:1000, the tower is already quite considerable…

Hot Shoe Cover minimalistic (internal flash working) V1.4

I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…

Calibration + Test Cube 20 - Kalibration + Testwürfel 20

Calibration + Test Cube 20 Kalibration + Testwürfel 20

Voronoi Halloween Pumpkin / Tealight Cover

This stylish pumpkin Halloween decoration looks great during the day and creates a mysterious atmosphere when the lights go out. Simply place an LED tea light in the pumpkin and enjoy the flickering shadows through the voronoi pattern.…

First Layer Calibration MK3S/MK3S+

This model has been created to calibrate our first layer using the full printbed.

Skeletal Alien Bust

Organic sculpture of an alien head/upper torso. Easy to remove supports. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Alien Queen - Pot and Planter for your Plants - Vase mode design

More advanced Alien pot design for your alien plants and other strange green creatures. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…

Infill Visualization Tool

Check out my Fast-Printing, Stackable, Infill Boxes ! The Infill Visualization Tool is a great companion to helping you choose infill settings. The boxes are strong, satisfying to assemble, and are printable in about 50% of the time it…

PERSONALIZABLE CHRISTMAS CARD

You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…

All in one calibration test Gcode for CoreOne/MK4/S with/without MMU3

The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…

Super Minimalist Snap-Top Container (Secondary Use: Fidget Toy!)

A humangear GoTubb ™ inspired container, but much more minimalist, and much more fidgety! If you can print with multi-material, then you can even make the container look like oreo or macaron cookies! :) The Minimalist-10: Diameter: 35mm…

H. R. Giger - Alien Queen Matchbox

I modified the chpola33 thingiverse model. ( https://www.thingiverse.com/thing:3364149 ) The matchbox designed for Red Roosters Pipe Matches may have different sizes from ordinary boxes. After printing: I sanded the box a bit and "shaded"…

Alien Coaster

Layer hight: 0.15mm Infill (bottom part): Triangles, 60% density Color change recommended Original model here

Burj Khalifa

Burj Khalifa model

Tealight Snowglobe

Tealight Christmas globe Are you looking for a design Christmas decoration or ornament that is easy to print and yet will get everyone excited? Here you have it! Print this gorgeous M size ornament as a stand alone decoration or print the…

Universal Frame Stiffener for Geeetech A20, A30; Creality CR10, CR10s; Tronxy, Sovol etc.

If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…

precision calipers 0.02mm

fully working calipers with 0.02mm precision

LW-PLA calibration cubes

Models and gcodes are created based on colorFabb tutorial HOW TO PRINT WITH LW-PLA (colorfabb.com) In order to calibrate LW-PLA prints you should: I. Check filament layer width in range of nozzle temperatures and pick temp with highest…

Caliper bracket for Ikea skadis or similar

Caliper bracket for Ikea skadis or similar. The hooks have an end to end spacing of 84.40mm. If you want to place the hooks yourself I leave you the following addresses. Original model of the bracket:…

Sexy Female alien with appearance humanoid

Motor Visualizer - TURBINE

This is a motor visualizer like a turbine. The model consists of three parts: the propeller, the tip and a connecting pin. It mounts interlocking. It has been printed in PETG with nozzle 0.4mm, layer height 0.15mm. The tip should be…

YF-19 Excalibur Kit Card

This is a kit card of the YF-19 Excalibur from the anime Macross Plus. It was suggested by Koobs7 over on Thingiverse, had a look at it and decided to make it because reverse wing aircraft are pretty cool looking. Normally I would give…

Greek tealight pillars

Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon

Burj Khalifa

The tallest building in the world in your living room? No problem, just print our model! Burj Khalifa is a 829,8m (2,722 ft) tall skyscraper in Dubai, UAE. Opened in 2010, it became a monumental part of the Dubai panorama. The building…

Butterfly Knife Balisong- CyberPunk Arasaka Remix Comb Version

CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife

Cat – Cute or Realistic 3D Figurine

This cat sculpture captures the grace and personality of a feline companion. Whether posed sitting, sleeping, or playing, it brings warmth and charm to any shelf or desk. Printing : Suitable for both FDM and resin printers Supports :…

Frighteningly Realistic Looking Spider Knob

Do you have something to hide and is your roommate afraid of spiders? Then use this knob….. Or just because you like such a knob or spiders. To operate you have to grab the spider by the lower body. Original design. The model I used for…

The Owl House Stringbean Palisman collapsing staff

This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…

Creality Ender 3 V3 SE spool holder 90deg adapter

Uses the original screws to attach the original spool holder to the adapter. Needs two extra M5 (minimum 15mm long) screws for the frame attachment. All holes have a diameter that enables screwing the screws directly, or using a tap…

EARRING ALIEN FACE PENDANT

I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…

Stringbean Palisman - The Owl House

Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill

QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles

If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…

Butterfly training knife fixed (Butterfly Comb / Balisong Comb)

Butterfly knife blade (Butterfly Comb / Balisong Comb)

VESA adapter for DELL Alienware AW3423DW

I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…

Uien tealight set

Print with a low temperature roughly 195C

INVISIBLE WALL HOOK - MINIMALISTIC WALL HOOK - (Tested)

An easy and quick to print wall hook !!!

Realistic 3D Sparrow Model – High Detail Printable Bird Sculpture

Bring nature to your 3D printing collection with this highly detailed, realistic 3D model of a sparrow! Designed with precision and printed using the Elegoo Neptune 4 Pro, this lifelike bird features intricate feather textures and a…

Ultralight glider V3 (170mm)

Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.

Gap Check Calibration Block

A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.

ALIEN STAND

Organic tablet stand Printing instructions: In order to print this model you need to download PRUSASLICER 2.6 Let's start by importing the model into Prusaslicer 2.6, at this point we need to divide it into 2 parts with the procedure…

Modular Moss Pole for Climbing Plants (Modułowy palik do mchu dla roślin pnących)

PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…

Monkey Skull Chalice AI Mesh Generation + Blender Displacement How to Video

Monkey Skull Chalice. HOW TO VID.

Santiago de Compostela Cathedral, Obradoiro Facade - Galicia, Spain

🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…