66 modeli
Mount AM2301 in a "Jung AS 500" frame. Hold with two M3 Button Head screw in the frame and one M3 Flat head screw on the print. Print settings: No Supports needed 0,2 mm Layer height 4 perimeter Extra parts: 1x AM2301 / DHT21 Digitaler…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Gehäuse für Wemos D1 mini oder andere ESP8266-Boards (Esp32, nodemcu ...) mit DHT22 / AM2302-Sensor. Case for Wemos D1 mini or other ESP8266 boards (Esp32, nodemcu ...) with DHT22/AM2302 Sensor. Print Settings Printer Brand: Creality…
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
If you have a little quantity of paint or resin to mix, this object is perfect. You just need to add a Ø4mm rod to the center. Maybe you need to adapt the scale of the hole in case of your printer settings for adjustment. Si vous avez une…
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
Top glass riser that doesn't take 22 hours to print and I can control the airflow through the riser. Simple, clean, easy to print and suited my needs. Props to the original design.
I needed a mount for my Eufy Cam2C that provided more angle when mounted from the ceiling. (https://us.eufylife.com/collections/battery-camera/products/t88311d1) There are 4 stl files. 3 mounts have an angle in 2 different orientations to…
The brackets of our Focus Thron2 eBikes broke and I needed a replacement. The bracket comes with a small slot to guide the cables through so you just need a few minutes to replace it without disassembling the plug. Use a knife or gentle…
I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer
DHT22 / DHT11 / AM2302 sensor mount. Mount using zip tie or screws. Category: Electronics
DHT22 AM2302 Housing Honeycomb Style This is a housing in honeycomb style for DHT22/AM2302 sensors. Heat up the pin after putting in the sensor and push it down. Thank you to @TueftelTyp https://www.thingiverse.com/TueftelTyp/about for…
two parts of cooler bracket
I wanted to install my Eufy cams outside. But didn't want to drill holes into the walls, because they are just placed temporarily. So I made this adapter. You only need an 8mm threaded rod and that's it. Printed in PETG. 0.2mm layer height.
Vylepšená verzia držiaku ktorý lepšie sedí do rámu. Pridaný prototyp gumového krytu. -------------- An improved version of the bracket that fits better into the frame. Added rubber cover prototype.
Needed a mount for my enclosure to hold the AM2302 (DHT22) temperature and humidity sensor. Didn't see ones I liked that allowed for easy mounting to the 2020 extrusion frame, so I made one. I have seen these boards from Keyes, DSD and…
CPU box for 6 pieces of Athlon/Phenom (Socket AM2) One file with both pieces (top and bottom). Print separately as depicted on the screenshot. I invite for to visit my webpage with links to social profiles and other computer activities at…
UPDATE (08/15/2023): I have flown several launches with this mount and even with zip-ties, there is still a little bounce/rattling. I suggest you shim the camera with the zip-tie cutoffs or other thin stock (left-over balsa?) until I can…
Charging socket Bosch Smart Code: 998018800
I bolted the yaesu 857 faceplate bracket to this printed mount and it worked great. I've also add a file that has the standard 1" ram ball in case you opt to mount it with a ram mount system. Update March 2025: Updated file with a center…
Box for 20 CPUs on sockets: AM2 AM3 mPGA754 mPGA939 FM1 FM2 FR5 and more 40x40mm CPUs
Pro maximalni velikost nodeMCU v3 60mm x 32mm Original model - onShape
I have designed a 3D-printed replacement handle mount for the WHIRLPOOL SW8AM2YWR2 fridge door handle. This part closely resembles the original, with a slight modification - it is approximately 3mm thicker to improve its durability. When…
Really liked @drwatson6 design, changed it a bit to better suit my needs. Higher tolerance for component placement on PCB (i.e. compensating for poor soldering in the manufacturing) countersunk holes for wood screws stronger pins for…
blade plug pour lightsaber. diamètre 25.4mm (1po)
Enclosure / Connector for a DHT22 / DHT11 / AM2302 sensor. Included are two different methods of interfacing with the sensor: CAT5 Ethernet Keystone Jack Cable Category: Electronics
jonction triple pour tube diam25
I have lots of old CPU's laying around… In an attempt to organize and protect the pins, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an AMD AM2 Socket. Printed with…
I use this esp8266/Am2320 combo to keep track of temps in different rooms and some outdoor areas for animals etc. Simple case and wall mount to monitor temps remotely. Uses M3 screws.
[Update: Sep 22, 2020] I made another mount for the BME280 sensor, too. Find it here: https://www.prusaprinters.org/prints/117039-am2302dht22-sensor-mount-for-extrusion-rail For my enclosure project with a temperature contolled fan I…
Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor, using a 378wh internal or 378wh T.E.C. Pack Battery. Mountable with two screws to a wall or, using the holes on the backside with…
So i wanted to start using my RunCam2 4K camera on some smaller rockets. This cam, although small, is rather bulky to mount on the side of a rocket so I set off to make one that could mount internally. I've made 2 versions of this for…
Summary Wall mount casing for the Keyes DHT22 / AM3202 module. Enjoy! Watch the making off @ YouTube: https://www.youtube.com/watch?v=jPjaodAKAKo Instructions You only need 3 x M3x8 to enclose the DHT module.
Simple tool to replace using a 6mm hex key to undo and remove the battery cover on a Focus Jam2 SL E-Bike. Tool is easily stored under the saddle by clipping to the saddle rail. Print it vertically with a small brim as shown in photo. Any…
Holds esp32 and dht22 board in a small case with a separator to help prevent esp32 temperature from heating the dht22 3 models to chose.
Snap fit enclosure for RPi Camera module v2 with m3 mount on back so you can attach it to whatever, whichever side up you please. m3 nut 8mm m3 screw for the tripod mount, if you have too long a screw you can reverse it so the nut is…
A mounting bracket for cheap AM2302 on PCB temperature & humidity sensors. These sensors are fairly common and appear to be a DHT22 (or knockoff) on a PCB with capacitor and pull-up resistor integrated. The bracket needs two M2.5 nuts on…
This is a cover for a AMD Socket AM2/AM2+ processor. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Infill: Doesn't matter Category: Tool Holders & Boxes
Zusatzkühlung Deye Hybridwechselrichter SUN-5/6/8/10/12/15/20/25K-SG01HP3-EU-AM2
Introduction: The AM23 is an attempt to make a simplistic fully automatic blaster. There were a few goals of the project, which are as follows: 1: Create a simple-to-build blaster that used common blaster parts 2: Make the blaster loosely…
An even more durable rambase alternative for prolonged, accidental dry fires. Adds even more material by adding 5mm on top of the regular ram2of. May not work with Vanguard ram cores, but is confirmed to work with Slug's O-ring and plain…
Ohne Brille kann man die Kaffestärkeneinstellung nicht auf Anhieb erkennen. Durch ein 3D-Druckteil lässt sich die eingestellte Kaffeestärke leichter erkennen.
Intel 478 cooler adapter bracket to allow the installation of AMD am2 to am4 coolers. Mounts with 4 m4 20-25mm screws and nuts. Intel 478 coolers are hard to get, and the ones that are available are junk for the most part, this allows the…
A mount for the AM2320 Digital Temp/Humidity sensor to allow you to mount it and monitor the temperature within your printer enclosure from your Raspberry Pi and Octoprint. The AM2320 just snaps into place and it's a simple one screw…
No Supports about 5 hours
Automatic Model 2025 (AM25) is a flywheel powered, straight talon magazine fed, full auto blaster. The purpose of this blaster was to create a blaster which had low hardware requirements, was easy to build, and could be made cheaply while…
I didn't find a good and tight mounting system for US standard peg board so I made one. Description: This would fit US standard peg boards with ¼ to 9/32 inch hole and 1 inch hole spacing from center of hole. The bracket has some…
I made this to be able to connect a normal 13mm and/or 16mm protection pipe to the AM2302 (Temp an humidity) sensor. Here is a pipe that fits: http://www.biltema.se/sv/Bil---MC/El/Batteriverktyg-och-tillbehor/Flexslang-2000031415/ Print…
Printable replacement for the RunCam2 case. I went through many iterations tuning the snap fit geometry to both hold the camera well, yet also allow it to release relatively easily. I decided to leave out the thumb tab release as I found…
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
Support Camera GoPro pour tube diam 25 3 modèles, face, 90 degrés ou 45 degrés Adaptés pour CrashBar de Marque HEDD
To replace the Hi-Lo gear for an unusual mini lathe
I just remixed in prusaslicer model to fit with MK4.
Mini 3d Gimbal Runcam 2 Adapter Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 2 Infill: 40% Category: R/C Vehicles
Cover for the WyzeCam2 to prevent it from sticking out like a sore thumb. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Any PLA Black Notes: This is only 2 layers thick Category:…
Die ist ein Gehäuse für ein D1 Mini ein SSD1306 Display und AM2302 Sensor. Die Anschlüsse des AM2302 Sensor sollte um 90 Grad gedreht werden. Gedruckt mit PLA oder PETG.
This is an adapter designed for a Vacmaster AM201/AM201R air mover to attach a 4 inch duct hose to one side of it. Version 1 (Deprecated) uses the existing pegs on the left side of the unit to attach, the current size is a loose fit.…
working on a sunshade for the RunCam2. was just gunna make it a big round one, but became rather massive and that's a unnecessary wind catcher. not 100% on it fitting yet as the app i'm using isn't a real CAD so exporting proportions are…
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support. I made it.
Run cam 2 cap cover for protecting lens Print Settings Printer Brand: Zortrax Printer: Zortrax M200 **Rafts:** Yes Supports: Yes **Resolution:** full Infill: 20% Category: R/C Vehicles
I needed a way to get the Sensor of the case to not heat it with the Power Brick and the ESP32 inside. Also i wanted to hide the cables. I got the Case in my lokal Hardware store but the diameter of the "Plug" with 16mm diameter probably…
v1.5 update: I updated the fillet to make the central pin stronger, and reprinted in PCCF. I uploaded a new .3mf file with the model oriented at an angle with supports to minimize the chance of sharing and increate part strength. I also…
Remix of Foray's fan shroud to fit an E810-CAM2 based card. (specifically FS.com variant) Due to the heatsink and fan size, the shroud is not quite single slot anymore but still fits within the low-profile/half height PCI limit. Added a…
Zusatzkühlung Deye Hybridwechselrichter SUN-5/6/8/10/12/15/20/25K-SG01HP3-EU-AM2
