482 modeli
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Wydruk około 4,29 €–5,24 € nettoWstępna wycena jednego wariantu
Needed something beyond the flimsy holder that came with my StreamDeck. After searching and not finding anything I liked, I took some inspiration from a few and designed my own.
Wydruk około 14,68 €–17,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Wydruk około 9,82 €–12,01 € nettoWstępna wycena jednego wariantu
Welcome to the Nintendo Switch Holder for Rivian 2.0! This refresh is specifically designed to make printing easier while also making it look more aesthetically pleasing. Smoothing the edges, and widening the sides for a flat bottom. The…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
I created this model for my 3DConnexion Spacemouse Wireless and my Elgato Streamdeck. You find some other models on Thingiverse, but for my personal preferences they are too plain, and it feels not natural to use the Streamdeck buttons,…
Wydruk około 11,97 €–14,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
Wydruk około 11,28 €–13,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Le streamdeck est utilisé avec des adolescents scolarisés, en situation de handicap. La précision gestuelle est parfois délicate. Le guide doigts permet d'éviter de taper deux touches proches en même temps. Réalisé en PLA, remplissage 15…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
I wanted a better way to store my Stream Deck Mini on my desk, so I designed a mount that lets you attach it under your monitor. The Stream Deck clips into place with a bit of force and stays securely mounted. It’s very practical. It…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a magnifier based on a webcam and a tablet. You need: A tablet (only tested on Android) A webcam “Razer Kiyo” or “Angetube Webcam 967” An OTG adapter to connect the webcam to the tablet A photo camera screw (0.25" / 20tpi) 15mm…
Wydruk około 7,22 €–8,82 € nettoWstępna wycena jednego wariantu
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…
The BC-250 board model features accurate proportions and dimensions. All mounting points precisely match the real board. You don't need to print this model, it's just a sample for body modeling.
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
I made this Backplate for AMD AM4 Platform. The Model is like the Original. You can Print this in PETG, but i really recommend any Carbon Fiber Filament, like PETG-CF, PLA-CF or ASA-CF/ABS-CF. The holes dont have a thread, its because if…
Just a CPU protection tray for AMD Ryzen AM4 CPU's Good for storage or shipping! Print Settings Layer height: 0.15mm - 0.20mm Support: None
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Replica of Gandalf's sword Glamdring featured in the LOTR movies. This is a work in progress. As of initial publication some things are still missing or represented in simplified ways. The runes on the chamfered part of the hilt are not…
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
Its a Streamdeck Holder /Slider for under the Desk V2. 4 Wall 30% Infill 3-4 Solid Top and Bottom Layer Many people had the problem that they couldn't get the parts together. I have now made a recess in the part with an adhesive part.
My custom Asrock BC-250 case designed to be compact and portable without compromising on cooling or function. Multiple themes are included as well as a blank case for your own themes. NOTE: This case will require some mild soldering and…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
A 3d model of the amd bc250 board, modeled to aid in the design process of a case. Not actually meant to be printed. Including a link to the bc250 community discord https://discord.gg/8eZfFWhczz
Inspired by JordanKs design, yet remodelled from scratch. Can hold the EU plug and 2 SDs tidily. Can also work as a stand. No warranty if it damages your Deck, though. Have fun.
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
This cover is designed to prevent damage to the analog sticks and touchpad in a commuter train bag. It consists of three parts, but it is made by simply plugging it in. Support is necessary when printing. if only the bottom tip is made of…
This is a 3D CAD model of the AMD BC-250 card, designed specifically for use as a reference when building custom enclosures or mounting brackets. The package includes the standard export files as STL and 3MF for easy integration, as well…
Display your favourite handhelds! I was horrified by big chunky stands so I've made one myself! I have tested it with Steamdeck, PSP, PSVITA, New 2ds XL and DS. It could not work for other handhelds Share your pictures if it worked for…
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
ONLY FOR PEOPLE WHO OWN 3D PRINTER AND/OR ENTHUSIAST WILLING TO TRY NEW STUFF MAKE SURE ALL VRM COMPONENTS HAVE INDIVIDUAL HEATSINKS (ALTERNATIVELY STOCK HEATSINK CAN BE TEARED APART AND USED FOR THAT IF YOU KNOW WHAT YOU ARE DOING :-) )…
A very rigid Streamdeck MK2 mount for a Fanatec wheelbase. Tested with a CSL DD, but any Fanatec wheelbase with T-nut mounting slots on the side should work. Additional parts needed: 3x M4xL4xD6 knurled nut insert 3x M4x12 bolt (a little…
I modeled this from the dimensions of my BC-250. Some dimensions might be off slightly due to inconsistencies in I/O soldering and PCB manufacturing but this should be great for designing cases or accessories. I left the I/O mounting…
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a…
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
GRAPHIC CARD SUPPORT DEVICE OPEN 110 MM CLOSED 64 MM YOUR GRAPHIC CARDS WILL NO LONGER BE WARPED AND WILL BE ABLE TO ADD STYLE WITH THEIR ELEGANT LOOK
This is a quick design to mount a portable monitor on top of the Steamdeck for on the go productivity. The monitor is a 13.3-inch Intehill OLED Portable Monitor. The portable monitor bracket has 9mm spacing. Other monitors might need…
2 Parted Keycap to make use of the Keyboard Backlight. The Keycap Base can be pressed in the Keycap and will stay in place - no glue needed. I made following Logos: Arch Linux Ubuntu SteamDeckOS Linux Mint Manjaro Fedora CachyOS May i…
GENERAL INFO The MI50 is a 16GB or 32GB server accelerator card without built in fans. It has a single mini-displayport and can be (relatively) easily flashed to Radeon Pro VII firmware and used in a desktop PC for light gaming or local…
Cooler used: https://a.co/d/gyw5dgC In my testing I went from 92c max to 72c max. Use the intel brackets (longer ones) to mount to the 3d Printed adapter. M4 nut and bolts for mounting.
🇰🇷 한국에 오신 것을 환영합니다 Welcome to South Korea! Three versions included: Original model by Brian Mauricio Sánchez (2018) Updated, detailed version in 3 parts to minimize supports (by Dany Sánchez , 2022) Updated, detailed version in 9 parts ,…
This is a fan shroud which replaces the original one of the AMD Instinct MI50 (32GB). It uses a blower fan which is able to cool the card at a pwm value of 65%. I'm using three cards like this on one mainboard and their temperatures are…
80mm fan adapter for most AMD MIXXX series GPUs. There is an optional fan bracket that can used if desired, or the fan can be mounted directly to the plenum. The bracket is designed to be used with m3 heat set inserts for mounting the…
A small case for storing or transporting AMD AM4 CPUs.
Shim for AMD AM5 processors to apply thermal grease/TIM cleanly. Use a flexible filament for easier applying and removal
Love my Streamdeck, but didn't want it taking up space on my desk when I'm not using it, so I created this “drawer” that mounts to the underside of my desktop with 2 wood screws. The Streamdeck drops into the “holder,” and then the holder…
Tired of watching your graphics card slowly strain your motherboard? Introducing an adjustable support solution designed to meet your needs, complete with a versatile clip for attaching any design you desire! If you print the AMD logo,…
Showcase your CPU on your desk. Display either the Heatspreader or the Pins/Pads. The AM4 Stand works for CPUs of Sockets AM2 and later as the Dimensions have not really changed. The Intel Stand should work for all LGA Models as the CPU…
Compatible with tolgaaxu's Glamdring model available at https://www.cgtrader.com/products/gandalf-glamdring-sword-the-hobbit Printed on the Bambu X1 Carbon at .1mm using dark blue inland PLA+ and generic silver silk PLA. I used epoxy to…
Built for my own Simpit, but others might find it useful. Images are in the orientation I printed out each object. Hinge Arms Long or Short can be printed, I use the long version. A total of 3 is required to attach to the Deck Hinge. Only…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
This is a battery attachment for the Steamclip. It is designed for a Baseus 20000 mah unit. This uses a 0.5x5x15mm spring. I will be uploading more models, but please check out my Etsy page MyRandomHobbies for more attachments.
I remixed the original lid from thing: https://www.thingiverse.com/thing:5232760 So I can storage CPUs sorted by brand at work. FOR AMD BOX I PRINTED AT 105% SCALE, OTHERWISE CPUS WON´T FIT All credit goes to original model. Hope it´s…
This is the main body for my Steamdeck Clip system "Steamclip" V2 includes a kickstand and SD card storage. You'll need a 1mm metal rod for the kickstand and sd card storage. I used a 1mmx100mm steel rod and cut it to length. I'd also…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
Adapter that allows you to use a 120mm fan on the AMD Wraith Max and Wraith Prism CPU coolers, replacing the stock 90mm fan. The adapter has 8 clips that allow it to connect to the cooler's heatsink fins. only the clips on the sides will…
This file contains the 3D model of a bracket designed to mount a Dell AMD Radeon RX6500 graphics card in Lenovo Tiny 5 models, including M720q, M920q, M920x, and P330 Tiny. The custom bracket ensures secure installation and optimal…
Y.A.M.D.S. - Yet Another Modular Drawer System Are you in need of a storage solution? Do you want to print your way out of a print instead of going to IKEA? Do you think that hexagons are indeed bestagons? Well my friend, then I've got…
This is a case for BC-250 board-computer, to use it with cheap 12v PSU - from HP server, like HSTNS-PL28 643954-201 (gen6, gen7 - reachable under 10$/10€ in state "like new"/new). It can be 460W, 750W … How to connect this thing to BC250?…
A custom 3D-printed case for the AMD BC-250, designed around standard ATX power supply compatibility as the primary design constraint. This project was driven by the goal of reusing existing ATX PSUs rather than purchasing new Flex ATX…
This is a magnetic mount for the StreamDeck XL that fits the StreamDeck like the included factory mount. It uses two M8 bevel head bolts to mount it. There is a hole for the USB port in the center. There are holes for 5x2mm neodymium…
I'm a fan of Panasonic Lamdash shaver for a long time. Only one downside is that it rarely come with a simple stand, though they offers a cleaning or charging stand. This is a simple stand for Panasonic Lamdash shaver. My shaver is…
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
This is a simple carrying case for the SteamDeck OLED cable. While the original one from JordanK is a great design, it unfortunately doesn't work well for the OLED due to the extra 1m of cable that comes with the OLED Charger. This case…
I created this adapter in Fusion 360 using a model posted by Josh as reference. My goal with this remix was to: Add more support to the corners holding the fan to accommodate heavier fans. Make an attempt to improve airflow by adding a…
Steamdeck Stand Remix. This was split to fit on bed and dowels fitted. The whole unit then glued together. This also works with my silicone case.
I wanted a carry case insert that can hold the original charger or the charger dock brick that I use. Here is a link to the charger dock I have, which this 3D print fits. This insert can also be used as a steam Deck stand!…
Simply removed the hexagons from the original file in order to facilitate a cleaner and more minimalistic design aesthetic. Demo is printed in obnoxious Candy Pink, but you can print in black. Does not require supports, but do print slow…
AM4 Backplate for Ryzen CPU AMD Motherboards use ABS or other High Temp Material do not print in PLA. You also need some screws depending on your cooler, also use a light one.
This is yet another Macro Keyboard / Stream Deck! There are plenty of awesome designs out there and many on Thingiverse, but none that were exactly what I was looking for in a macro keyboard. The general design for the Teensy StreamDeck…
A cooling solution for Asrock AMD BC-250. Requires: - M3 inserts - M3 screws - 2 120mm fans - The bottom part is for my FlexATX (don't remember the brand) and might not fit yours The middle fins on the heatsink needs to be removed.
I used a little support on the inside edges. Nothing major. Common M6/M8 hardware used to assemble. One could add some felt or velcro bits to soften the surroundings but mine doesn't rattle as-is.
This assembly takes two microfit connectors and contains clips to keep them latched to the mating connectors on a BC-250 computer. Prints without supports and tested in PETG. From user feedback, an outer brim and slower print speeds (at…
AMD AM4 CPU case using 4 M3 screw (2.5'' inch ssd screw)
Made a remix of the streamdeck mount for my Logitech G815 keyboard. Fits pretty well, but lacks a bit of fricton on the keyboard "claw" when pressing the outer left or right buttons. Printed on Prusa Mini+ with PLA on its back (like in…
Printed with the top (the part with the hole for the fan) on the build plate and tree supports set to only touching build plate. In testing on superposition 1080p high this kept the card about 10c cooler than the triple fan model and…
UPDATED: v1.3 Added alternative fan sleeve for 3x 120mm fans. Use high pressure ones on the front side. I personally use the default 2 fan version, additional fan is not a big impact, but YMMV. UPDATED: v1.2 Updated front card mounting…
This Steam Deck dock is designed for Dockteck branded 7in1 USB-C hub with 4k 60hz hdmi output. (Amazon link at bottom). To mount the hub, you simply slide it in. Two versions, one with the hub tilted at an angle and another with the hub…
For the Baseus Adaman Powerbank (PPADM65 20,000mah) v1.1 fixes some double geometry that was present in the original model. Slightly increased tolerances, which should make it grip the Steamdeck and the Powerbank better. Inspired by…
This is a trimmed-down version of the Steam Velcro Strap Brace for Power Banks modified by making it for the Killswitch case by Dbrand. If you own a Killswitch case you no longer need to use deckmate accessories, just attach the item you…
I wanted to tidy up my desk using a USB hub to hide all of my cables (mouse/keyboard/macropad/streamdeck). The model is in two parts and friction fits together. Printed with a 4mm nozzle at 0.2mm layer height and 40% infill. Your printer…
Rafts: No Supports: YES Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Filament: PLA in White or transparent
I didn't like the original stand of my StreamDeck so I designed one myself. The stand is split in three parts, that are screwed together with two M3x12 screws. So the cable can be routed through the stand. To add some rubber feet, there…
AMD Radeon RX 6000 series PCI/PCI-E slot covers with extruded model names. Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover. Why have boring, plain, generic PCI/PCI-E slot covers…
This clamp is for a StreamDeck (MK.2) to mount it to a 8040 alu-profile on your simrig. Print this part with the big opening down on the printerbed. So you don't need any support and the clamping face will get a good fit. There is only…
Since there are no official aftermarket coolers for AMD 4700S Desktop Kit, or any 3d printable parts which could help do it with any other cooler. I decided to try something first myself. I noticed that you can easily swap the 80mm fan…
A stand for the Steamdeck. I also added a holder for AlzaPower USB-C Dock Station 7v1 , but if you download the Blender file, you can edit it to fit whatever hub you have very easily. Just make sure that all your ports are on one side! I…
THX @ https://www.printables.com/de/@JordanK i see your verry nice print and must add the Steamlogo to make it for me perfect
A simple Streamdeck XL Stand i made. I wanted to be able to reach the keys as easy as those on my keyboard. Print in any material. 2-3 Perimeter. 10-20% infill. Use double sided (best use nano tape) to fix it to the table and the…
These are the models for my Autohotkey Streamdeck with Unified Communicator Keycaps. It houses a raspberry pi pico, RGB Leds and 4 Cherry MX switches. See https://buildcomics.com/3d-printing/a-microsoft-teams-adventure/ for the…
Found some other models, but they had frills I didn't like or didn't have proper relief for the cable that exits out the back of the streamdeck forcing an ill fit or a kinked cable that could damage the streamdeck over time. Just a flat…
Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…
Slightly modified version of another clamshell AM4 CPU case/tray.
Eine simple Halterung für das MK2 StreamDeck an der Logitech G915 mit Öffnung für Ladekabel. Gedruckt mit einem Prusa MK3S+ in schwarzem Jayo PETG. 15% Infill A simple holder for the MK2 StreamDeck on the Logitech G915 with an opening for…
Intro When I started with the BC-250 I printed an attractive and compact case that would incorporate a Meanwell LRS-350-12. However, my thermal performance was dreadful and the loud fan of the meanwell was a constant annoyance that was…
EDIT** I've added the files marked final to make it slightly bigger so that I could align it to utilize 2 JSAUX 90 Degree Right Angle adapters. They can be found here:…
![Generic handheld stand [PSP, PSVITA, STEAMDECK, 3DS]](https://media.printables.com/media/prints/581583/images/4642614_437abe6c-c39c-4b2f-b2ba-bd2898c4f4e0/photo_2023-09-13_17-43-21-2.jpg)
