Bride pour OBD Canbus BMW 1200 GS
A imprimer à plat pour une meilleure résistance. Réalisé il y a 2 ans, toujours en place !
- Pobrania
- 57
- Polubienia
- 11
- Ocena
- 5
182 modeli
A imprimer à plat pour une meilleure résistance. Réalisé il y a 2 ans, toujours en place !
V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…
BigTreeTecg CanBus U2C board clip mount - Voron 2.4
Bring one of the world’s most recognizable landmarks to your 3D printer with this Hagia Sophia Mosque (Ayasofya) model. Inspired by the historic beauty of Hagia Sophia in Istanbul, this 3D printable design is made for architecture lovers,…
Umbilical mod for canbus need only 2x M3x10 screews and pull strap(s) compactible with tall prints used red PET Expandable Cable Sleeve 8mm 1m lenght for 350 size and original Mellow SB2040 cables with 2,4 mm nylon wire for grass cut and…
HISTORY: During the Byzantine period the Emperor Justinian had a tower erected in what was to become Galata. This tower was destroyed during the Fourth Crusade in 1204. In 1267 a Genoese colony was established in the Galata part of…
Bowden tube and CANbus cable support clips. Oftentimes switching from conventional setup of gazillion wires into cable chains is a bit tough as there are certain challenges with this. Small things can make big difference. Challenge this…
I wanted to use the SB2040 canbus with umbilical wiring. Most designs rely on a PG7 cable gland but I felt like it would be nice to use a printed part instead. V2 (21/10/2023) Cable removal I found out the hard way that sometimes it's…
You have to push the cable into the mount, it's very tight I used this cable: Acer 240W https://tinylink.net/Ngt19 I've also added the STEP file so you can adjust for your cable V2: Made stronger and has shorter options this is temporary…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
I am upgrading to a CAN setup on my Voron 2.4 and I needed Rear mount and Y endstop relocation bracket. I remixed this excellent model intended for Huvud to better fit my needs. IMPORTANT UPDATE No More Cable Gland, Could not overcome…
…Please be sure to hit like & post a make, I'd love to see your prints! Print standard VORON settings, no supports required!…
I simply designed it for a good friend because he didn't like the ones available on the internet. And since he likes it, I just hope that others will enjoy it too.
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
The Maiden's Tower (Turkish: Kız Kulesi), also known as Leander's Tower (Tower of Leandros) since the medieval Byzantine period, is a tower lying on a small islet located at the southern entrance of the Bosphorus strait 200 m (220 yd)…
Voron V2.4 Canbus Exhaust Filter Mod for M12x1,5 cable glands.
Thanks @Slimak_756049 for the original and for uploading a step file!
=== BTT U2C Case === === Pictures === Recommended print material: PETG, ABS, ASA Hardware: x4 M3 30mm (can be two, like on the photos) x2 M3 8mm x2 heatinsert (Voron style or Od 4mm from Aliexpress) Changelog (day/month/year): 01.09.2024…
added a fan without srews (tight fit) and strain relief with seperate cable holder and some extra space at the back for the fan mos for the mellow fly . Fan size 3010 strain relief uses 3mm bolts with hexnut. Update* new cable strain…
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Mixing using EBB36 and LGX lite with cable chain hook.
T K provided the step file and I was able to adjust the sizing to match the hole insert sizes and positions a little to more exactly match the printer. A print in PLA is now an almost perfect fit (at least with the hatchbox filament I'm…
The Galatatower is one of the most important sights in Istanbul. This model is out of four parts and uses an LED-Lamp like this one: https://de.aliexpress.com/item/32985551093.html?spm=a2g0s.9042311.0.0.4bc24c4dcI657Y It is 40cm high -…
CanBus Umbilical m12X1.5 for SB2040 EBB36 Holder for cable gland M12x1.5 use m3x20
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…
Modified Umbilical frame cover, to mount a Mellow FLY-UTOC or Bigtreetech U2C CAN adapter board on a V0. Requires 4 Voron BOM heatset inserts.
This 3D printable file provides a precise and efficient solution for mounting either the EBB36 or SHT36 canbus board onto the Vz Hextruder CNC, complete with a PG7
FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…
Der Anhänger sollte mindestens in PETG gedruckt werde, besser wäre aber noch ABS
This model is modified from KayosMaker canboard mount https://github.com/KayosMaker/CANboard_Mounts It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2 and can still use dragchain for cable management…
Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~5mm
Allows you to use EBB42 attachment with Voron. I use it with LGX on my Voron2.4. BOM: 7 threaded inserts 3 M3x22 Socket Button Head Cap Screws 7 M3x6 any screws (4 to hold EBB42 and 3 to hold dragchain) Print settings: 0.4 nozzle 4 walls…
Remix to support a 2 hole drag chain. Update: Seems like the original 3 hole and the 2 hole remix did not work. I made a new version that's been tested now and works well. I did desolder, flip, then resolder the hot end heater connectors…
Full Model of the BTT hermit Crab V2 canbus edition. All PCB credit goes to BTT and can be found on their github https://github.com/bigtreetech/HermitCrab/tree/master/HermitCrab2/3D - All other parts (except screws) modelled by me.…
UPDATE 12/09/2022: Uploaded stp file of toolhead, Y-stop trigger and Y-stop switch. UPDATE 08/09/2022: Updated the Gerber file adding Bat85 on the breakout PCB. Black ring towards the probe whether an Euclid Probe or an inductive type.…
Voron Stealthburner Canbus Mellow SHT-42 Mount for LGX and Clockwork 1 incl. Stepfile Parts Needed: M12x1,5 Strain Relief 2x M3x25 4x M3x30 2x M3 Inserts Location:
Voron CanBus Umbilical PG7,for pg7cablegland
It is recommended to use TPU consumables. This model needs to use the deformation characteristics of some soft materials. At the same time, soft materials can avoid wearing the plastic parts of the machine.
Fit M12 gland from aliexpress. Print thread down with organic supports
Print settings: Material: ABS/ASA Walls: 5 Infill: 100%
I remixed the original to allow a Mellow Fly SH-36v2 CANBUS board to mount on the Voron Clockworks2 Stealthburner I've also made the umbilical mount a bit ticker and longer to allow for better mounting with colson-ties
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
Voron 2.4 Stealthburner cable door with fan for btt ebb rp2040 canbus to cooldown the driver and rp2040
For ERCF v2: Clockwork2 body (new Version) modified incl BigTreetech EBB v1.2, Toolheadsenor, Entrysensor, ECAS and Filamentrix Cutter for ERCF v2 included: BTT EBB v1.2 STLs Latch (new version) slicing with prusa/orca slicer works well.…
Historic tower of Istanbul. Instructions I haven't print it yet. But i think it is better to print it at hollow material adjustment. (Shell option on Up! printers). P.S.: It has no scale . Because all dimensions of the model have been…
this was made for the PTFE that came in an LDO Voron 2.4 kit (large diameter), the Bowden hole is 4.5 and it shouldn't be a tight fit (and it's certainly not tight with the Creality tube I have now) / the middle hole is for a peice of…
This design allows the EBB36 CANBUS board to be used on Stealthburner with CW2 while retaining the X axis cable chains. A few items of note: You must use the ‘PCB’ cable cover door on Stealthburner. The backpack bracket includes built-in…
Print flat on bed with recommended Voron print settings; pair with DIN mount clip from Voron files. Use M2 to secure to DIN mount clip.
I made it stand according to 3007 or 3006 fans.You need some glue so that the pan doesn't come out
GENERAL INFORMATION THIS CONTAINS REMIXED FILES FROM THE ORBITER TURBITER PROJECT: https://www.orbiterprojects.com/turbiter/ PLEASE NOTE THAT THE MOUNT MIGHT NOT BE COMPATIBLE WITH THE SHT36 BOARD AS THE CANBUS WIRE FLANGE WAS NOT…
More options for fan styles! These are for 3007 fans. Updated hex-pattern to be more rigid. Original design kept breaking on me. ASA-CF used in picture. Only print in ABS/ASA
Created by @Cassin, https://www.thingiverse.com/thing:4186718 The trays have not the full hight of the original game box so Cassin put a folded cardboard under the trays to make the game better transportable. Plans are added in the files.
Use all the same parts from nzalog's remix and replace the 2 hole with 3 hole.
A small clip to hold a bowden tube to the BTT Canbus cable. Print as many as you need to hold the tube in alignment with the canbus cable to keep it from flopping around.
The original stubby mount for an M12 cable gland has an M12x1.75mm pitch. The CNLinko connectors have M12x1.25mm pitch so I re-modelled the mount to have an M12x1.25 thread. CNLinko waterproof connectors in various pin configurations can…
Use this mount to add Mellow's CANBUS expansion board to any printer with aluminum extrusions. Extra space is provided to connect power wires to easily to both sides. Find the expand board here:…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
A top hat centre piece with holes for the canbus cable gland, and PTFE guide. If you have a top hat on your voron, you must want the gantry to be able to move higher on the printer. Moving the cables and filament guide will help. Also, it…
modified the original CanBus clp to have a 3 hole Cable Chain attachment
Intercity Istanbul Park, Turkey, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
If you're using Micro Swiss' direct drive and you want to upgrade your printer toolhead to CANBUS, then this mount is likely to make you happy! It mounts directly and simply to the existing direct drive stepper motor and positions the…
Formula 1 Istanbul Park track decor.
I had the following requirements for an insert for the Istanbul Big Box : I wanted individual trays for the elements that are placed on the game board (e.g., for the market, the mosques, and the cards) The components should be organized…
What is it? This is a partly reinforced toolheadboardmount for extruders with WWBMG mountingpoints. I have added a mount for the PUG to the side of the mount. I have added a hinge to one side of the PUG mount, eliminating the need for…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by the iconic Hagia Sophia,…
My CanBus corrugated tube was banging on the side panel every time the X axis moved near it. So I joined the filament bowden tube and the corrugated CanBus tube with a simple clip to circumvent the issue. It worked :) This is the…
Looked at the official version of this and the holes didn't even line up. So I had to make my own. Uses 4x M3x6 screws and 2x M3 heat set inserts. The Board Self taps into the plastic. The Din Mount clip uses a modded version with heat…
Istanbul Üniversitesi giriş alanı dizaynı. Istanbul University entrance area design. Tasarım Yavuz Selim KAPSIZ'a aitdir. Design belongs to Yavuz Selim KAPSIZ. Kendisinin izni ile paylaşılmıştır. Shared with his permission.
This is a great PG7 mount that worked well with my BTT SB2209 RP2040 board since it it out of the way from the connector, however I'm also using the BTT CANBUS cable (the one with the pre-molded XT60+2 connector on it) and there was no…
After adding the EBB RP2040 and Galileo mods… I was having issues with the canbus cable failing due to internal conductors breaking where the cable transitions to the plug, after many hours of printing. Tried other cable relief solutions…
Identical to the original model this is based off of, except that the PG7 hole on the side of the housing is fully threaded. I had the best luck printing with the small opening touching the bed, I know it doesn't make sense based on the…
New easy version of my earplug - dampens sound a bit without reducing quality. Good for spaces that are loud (restaurants, parties, concerts) but where you still want to listen. Worked with all the earbud covers I tried it with. Print…
CANBus cable strain relief for BTT EBB42 board piggybacking an NEMA17 42mm extruder motor. .3mf and .step files of the model included, also the Fusion360 archive file if someone wishes to modify the model.
Voron V2.4 Canbus Exhaust Filter Mod for M12.5 PG7 cable glands. Supports on the rear side thread pg7 would be ideal. Sag from print orientation make it much tighter Fixed threads thanks to @KevinKunst_286112
Voron LGX Canbus SHT-36V2 or Style Mount for Trident / V1.8 with Step File Parts Needed 4x M3x4 Threated Inserts Canbus Mount and Drag Chain Mount 2x M3x12 Drag Chain Mount 1x M3x6 Screw for the Cable Cover
Da ich die Idee ganz nett fand, habe ich einfach mal ein Lesezeichen erstellt. Gedruckt wurde es mit einer 0,2 Nozzle.
About Why ? The Sunlu S2 Filament Dryer does not have a fan that helps in extracting humidity from the filament chamber. I was looking for a non-destructive addon like this…
Use these interconnecting grid parts to keep Istanbul 's market tiles in place during play. Support My Work Should you want to, you can support me on Patreon . If you are unable to become a patron, remember that likes are free and make…
Fenerbahce Istanbul Magnet 2x - 8x2 magnet
Es werden noch 2 Schlosserscheiben für M3 und eine M3x30mm DIN912 benötigt. Die zwei Schlosserscheiben werden mit einem leichten Fett oder Ölfilm belegt und zwischen Halter und Fahne montiert um ein reiben von Kunststoff auf Kunststoff zu…
Hi, I created this model to hold an Ebb36 CanBus board on an upgraded AnyCubic Chiron. The Chiron kept on having broken wires in the cable chain so I wanted to go to CanBus and an umbilical. Since I no longer use the cable chain I mounted…
fantastic for printing petg and better than stock for printing pla massively reduces the hotend weight and puts the part cooling air flow exactly where it should be parts required: bigtreetech ebb36 can board 5015 fan ( cut off the left…
If the Canbus adapter U2C from BTT does not fit on a din rail. The mods place the Canbus adapter between the X and Y motor. Link to the U2C canbus adapter. https://github.com/bigtreetech/U2C The mod works for the Voron 0.* The upper…
İstanbul Shadow Box. You can print it in any color you want. No AMS needed.
I have constructed a simple holder for the Simagic CANbus Hub / Extender. This also serves to conceal the LED. Ideally, print the holder at a 45° angle, so you only need small supports and the holder is more stable.
I wanted to use Galvanic's Bowden guide arm on my Micron. I redrew the basic mount to fit 1515 extrusion. The original arms should work with this new mount. I did not create a version that uses bearings.
Design Concept The Hanbun Japandi Pot is inspired by a fusion of Japanese and Scandinavian design concepts, highlighting clean lines and minimalist aesthetics. This elegant pot is an ideal design piece for modern home décor. This pot is…
Lithophane solar lamp depicting 2 of the most famous sights of istanbul. Created with itslitho. The Hagia Sophia and the Maiden's Tower. The pics are from pixabay.com I used a similar solar lamp to these ones: https://amzn.to/4hpyqqZ…
I decided to rebuild an original CR10 for a mate. Added the following - CanBUS - Braces - Stealthburner on linear rails - BD Sensor https://www.printables.com/model/831679-lazy-bd-sensor-adapter-for-stealthburner-voron/comments/1779948 -…
This is the Super Stealth Orbiter, a super low profile mount/housing for your Orbiter 1.5 + voron stealthburner with easy access for servicing the Orbiter without removing it from the printer/housing. Features To have an unbroken PTFE…
Modified exhaust filter door and inner chamber exhaust support for CANBUS. You will need x2 M3x10mm screws.
This Remix have more stability and fits perfectly for my PG7 with M12x1.5 thread. Fits with Fly SHT36 and EBB36 Canbus Modul. Use 2x heat inserts to screw the PCB: https://amzn.to/4gj21lk Screws: https://amzn.to/3Zqkgie
These CANBUS mounts use a 0.5mm or 0.64mm rod. I used a 0.50 mm rod but I may change it to 0.64 mm to remove a little of the lean :-) These will allow full unrestricted movement with a raised chamber height. The cable bridge is a modded…
Remix of Vittop's EBB42 canbus Voron attachment with dragchain mount for drag chains that have 2 holes instead of 3.
Hello! I have created an umbilical plate for the Voron 0.2. with CNlinko connectors and an outlet for the bowden tube. You still need the following things for the mod: 1x Cnlinko 4 or 6 Pin M12 (Plate Version) 1x Outlet for Bowden Tube 4x…
This is just simple umbilical mod designed for CAN Bus tool head board. I have planned to run wires from electronics chamber to exhaust fan grill via inside of the rear right frame. Strain relief is placed on the grill and from there…
Print with support if you don't want to cut part of the connector. Works well without cutting. If you cut and print it please send a picture :). Good prints for you guys.
Use M5 screws.
The box for the Istanbul boardgame is way too big and inefficient. Designed this custom box to hold all game pieces, neatly organized in separate boxes for the smaller pieces. The box fits exactly inside half of the original box, so if I…