Liczymy pasujące modele…
Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless? If your answers are Yes, then here is a…
The Arctis Nova Pro uses a different ear cup mounting mechanism than past headset versions, preventing the use of existing replacement ear cups. Along with the availability of compatible replacements only using faux leather (hot and…
A under desk mount for Steel Series. Should just slide in from the front.
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
Arctis Nova Pro Wireless controller under desk and side mount. Attached with Screw holes, or an .STL for no screw holes if you wish to attach with double sided tape as I have done. I made 7 different variations of these mounts before I…
Best to mix up the colours for the insert. Use supports for the overhang at the top. (warning I haven't done many tests for the tolerances of the inserts, please let me know if it's not the right size)
I need to travel with my headset sometimes and decided to create a case for it! Can hold both the headset and the DAC along with any cables you may need as well. DAC fits in the middle of the headset band (see image) inside the case. Fits…
Arctis Nova Pro Wireless controller under desk mount and headphone holder. Headphone holder bracket added to under-desk design
Mounting bracket to allow mounting the base station for a SteelSeries Arctis Nova Pro headset under a desk. Print standing on the back end; the stopper on this end doubles as mouse ears to enhance adhesion.
Simple holder that mounts on the wall for the Arctis Wireless Pro headset (should work fine with the wired version). Can print decently without support, and be mounted with regular screws into the wall as there won't be a lot of weight on…
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
Minor Update based on comments. - Added a left model that is mirrored I made this for the side of the headphones without all the electronics but it should work on both sides with some trimming. The square portion is ~11.4mm wide, and the…
Print these with support for smaller clip. Slot the front catch in first before clipping the back into place. Then slide the ears around into the purrfect position.
I printed these with PLA+ with a 4mm nozzle and 0.2mm layer height. I used the default Cura profile for PLA. I advise using raft for adhesion as it will help with the support material removal. You'll also need magnets from amazon, I used…
This is an extender to use with the original cusions to get rid of the ANC mic bump. it will add 4,5mm to each cusion. Print laying flat without supports. I needed to use a small layer-size on the top clips to get a perfect fit.
Under desk mount for the Arctis nova pro wireless, charger. Printed in PLA with 3 walls. top and bottom. And 15% infill. Printed upright as shown in the preview, with supports for the overhang.
This custom mount for the Arctis Pro Nova and GameDAC Gen 2 is designed to provide a sleek and practical way to organize your headset and DAC amplifier. It’s easy to 3D print and compatible with most desk surfaces, offering stability and…
This is my own design for a "SteelSeries Arctis Pro Wireless" Headphone Stand. It fits exactly around the base / sender so you can hang the headphones right over the base. The connections fit exactly, so no glue is required (might need…
This is a remix for fitting my base I printed the Original part in DevilDesign Black PLA, and I wasn't able to fit the deck in the support without snapping in 2, so i made this remix to fix the problem Steelseries Artics Pro Deck
Hello! I designed in Fusion 360 to help get my DAC mounted underneath my desk.
Holder for Arctis Nova Pro Wireless and the Base Station Category: 3D Printing
Fairly simple part, settings vary between printer and slicer software and material. For this bracket I got really good results for the resolution and settings listed as well as a nozzle bed temp at 220/60c (Cura slicer 4.13.1). This…
I recreated the headphone cup caps (they may be called “Speaker Plates” for my SteelSeries Arctis Pro Wireless. It maybe be possible to FDM print these with a 0.4 mm nozzle, but I have not attempted it yet. I just wanted to try and…
Printed 0.15mm Filament: 3DJAKE magicPLA
Remix of the shrek plates without the shrek ears
Updated 11/14/24 Should load into slicer as intended to print, minimal or no supports. Thanks for the help with development and testing to user @Arson_2595054
Steelseries headbands are notoriously bad. Comfy, but wear out easy. This clip for the Arctis Nova Pro is made to hold the headband securely in place. Printable in PLA.
Simple holder for SteelSeries Arctis 1 Wireless headphones, would work with other headphones of the same brand with same cable extender for dongle. Jednoduchý držák pro sluchátka SteelSeries Arctis 1 Wireless, bude fungovat i pro jiná…
During the past year I had to wear my Arctis 7 a lot more and for a lot longer than before due to lockdown and the transition to online. After prolonged periods of use, my ears started to hurt. Either I have big ears or the Arctis 7 has…
Hi there, i designed an adapter for all Arctis ear pads for the new SteelSeries Arctis Nova Pro Wireless headset. assembly Instructions: You need to remove the ear pads (there is a video on youtube on how to remove it) check if the…
Steelseries Arctis Pro Cyberpunk plate Just need magnets once printed You can use multiple colors using mmu/coolor change as height are different for each colors. Though I would recommend resing printing and painting
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
There are a few thicknesses included. I printed with Overture High Speed TPU and the thinnest ones worked best. I included the thicker ones for softer durometer plastics.
Print instructions Print in PLA The multi-color effect can be easily achieved even on single-color printers. Just print the logo first, change the filament, and print the cover “on top” of the logo. To avoid collisions, the logo and cover…
Update: Added a MEDIUM size which should sit tighter than the large but not give you a headache. After using my Arctis Nova 5 for barely over a year the outer frame snapped when I was taking it off normally. Quite disappointing. Since the…
Battery case for your SteelSeries Arctis Nova Pro headset. I only used prusament PLA for this, 15% infill, brim, no supports. Pretty much default settings. Most filament materials should work.
Replacement caps for the removable plastic caps on the Steelseries Arctis Nova 7 headset. The magnets that fit in the holes on the bottom side are 10 mm x 5 mm x 2 mm. The logo can be printed in another color and glued inside the logo on…
Bought a steelseries arctis pro wireless headsett wich comes with a bluetooth hub that needed some upgrades. Print x1 Hub Print x2 Feet Glue the feets on the bottom of the hub. Feets are taken from kafka who made a remix from Subsite
Original model was built for Arctis Pro and it also fits my Arctis 7. I made some cosmetic changes.
SteelSeries Arctis Nova Pro Wireless DAC Stand| Sat on table too low for me, so with zero experience i made that abomination. Tips are welcome
I was tired of misplacing the receiver or losing it on my messy desk so I make a removeable wall mount for it. Just use some double sided 3M strips or something like it to adhear it to the wall. I hope this is useful for someone.
The original Arctis Nova 5 ear pads are too thin. This spacer adds 9 mm between the ears and the headset driver. No supports required
Designed to connect to a vertical surface using command strips Category: Audio
The idea was to create some cosplay like attachments for the Steelseries Arctis Nova 7 to bring some laughter to a web meeting. As there were only two models - sdahris Arctis Nova Ear Plates and the original SteelSeries Arctis Nova 7…
Wall hanger for SteelSeries Arctis Pro Wireless headphones. Takes on 4mm woodscrew into either wallplug or stud. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: eSun PETG…
Low poly Headset stand, this is made from PLA, around 3 hour print time at 35% infill. Prints super well and ended up printing 4 versions to get it just the way I like it. Really love it and would love your feedback or requests! Thanks so…
Steelseries Arctis Nova Pro Battery Holder x2 - x3 - x4 Holds your batteries nice and snug, ready to be deployed in seconds when your active battery dies… And it looks better on your desk than letting the batteries float on your desk or…
I designed this model to hold a couple of spare battery packs for my steelseries Arctis Pro Wireless headset. It fits over the top of the base station so your spare battery packs are always handy. It should fit snugly and not require any…
I had enough with the dangling headband, the headband stretches over time and every once a while i tighten the headband, which leaves a dangling strap. Please if there is any suggestions post them in comments, also if you would like to…
Clip to hold the USB dongle for the Steelseries Arctis 1 Wireless. It attaches the dongle to the headband when not in use, and still allows you to plug it in to a USB port without needing to take off the clip. Just print it with the flat…
I wanted more room on my desktop so i made this holder to mount it under the table. Space to use all the ports
I'm getting a new XLR mic and needed to raise this up so I made this stand! Print instructions Unassociated tags: Arctis Pro + GameDAC, Arctis Pro GameDAC Category: Gadgets Summary I'm getting a new XLR mic and needed to raise this up so…
A quick and reliable solution was needed to secure the device to the edge of the table. I didn't want to mess up the case with tape or some type of tie, so I came up with the idea of making a case that could be secured with both glue and…
Both model's are rescaled to fit better on the headphone. The one with the Punisher Skull you can color change it if you like. You can use multiple colors buy using different height for each layer height. I'm using prusa mk3s with a 0.6mm…
How to use this print: Print each part once, glue them together. Make sure they fit on your Arctis headphones (they might need a little help). If everything seems ok, you can print the second pair for the other ear. Glue the parts on the…
This headphone stand model is designed specifically for the SteelSeries Arctis Nova Pro Omni Wireless base station. It features a sleek, integrated design that securely holds your headset while keeping the base station easily accessible…
i made this so i could put my receiver for my headset somewhere more convenient and out of the way. originally i wanted to have it clip into something but couldn't find a good place or mounting method. feel free to remix this to mount…
Remix of Cenedd's Arctis Pro hedphone hanger with hooks for skådis pegboard.
This is an under desk mount for the Steel Series Arctis Nova Pro Wireless base station with an integrated headphone hook. It includes two countersunk holes for screws to mount it to your desk. The design is optimized for printing, but I…
Just a basic remix of 2 desgines. For the installatation you're going to need 3-6 screws. After fixing the suport to the table just slide in the BS from the front and conect the cables from the back(you can ziptie it down) Category: Audio
USB dongle holder for SteelSeries Arctis 7P (PS5) so you can mount it to the PS5's panels for a better signal reception and a cleaner look of your gaming area. Two versions available : - Minimalist for a classic look (print with 0.4mm…
My desk is a bit tight on space, especially the monitor area, as i have two monitor risers that fit on top of one another so i needed something to have the gamedac raised away from the desk to clear space but still be easily accessible. i…
Hello, i own a Steelseries Arctis Pro Wireless. After about 5 years i discovered a small crack on the right side near the bracket where the rubber band is inserted. I tried to glue it with special plastic glue, but unfortunately this…
This a replacement headband for SteelSeries Arctis 7/7+/9X/ArctisPro Printed out of TPU you never need another one. You can adjust the length if you need more space. The original headbands get lose after some month, so I made this to not…
The Arctis Nova Pro wireless base station (DAC) has an annoying curve making it difficult to store things on top without them sliding off. This remix adds a flat top so you can place a wireless phone charger, glasses holder, or other item…
I didn't like the way that the spare battery was loaded and wanted a more ergonomic way to get it in and out. This design also has a secondary benefit of taking up less surface area wherever you have it sitting.
cable protector for arctis 3(may fit to 5-7 too). i've been using arctis 3 for a while and the cable broke from the headset plug so i had to design this to keep it in place print vertically so you don't use any supports or something 0.2…
I wanted a nice holder to keep my small stuff gathered on top of my Nova Pro mixer. THIS IS JUST THE TOP, download the body bellow: Base: https://www.printables.com/model/722600-steel-series-arctis-nova-pro-wireless-under-desk-m Just use…
Allows you to adjust Arctis Nova 7 headset headband so it is shorter than factory Pins are pretty small, print with PETG. PLA might be too fragile.
Made the battery access slot significantly bigger to make grabbing the battery easier once ejected.
These are earcup accent plates for the arctis nova pro series of headphones. It should fit any arctis nova pro submodel. You can print them in any color you want to make your headphones more yours. The right and left sides are the same,…
This remix fixes the following issues: Fragile locking tab: The original tab was too thin and prone to breaking; it has been reinforced. Internal height: The original clearance was insufficient and crushed the ear pads. This version…
The arctic 7 receiver/transmitter has always been annoying because it is small and light. The tension from the cable makes it turn around and be in the way on the desk. When I saw the mount for it I printed it hoping that it would solve…
Bracket for broken SteelSeries Arctis Pro connection
I always had problems getting the battery out of the arctis pro. I designed this simple tool for this problem.
Design Concept The design for this dongle holder offers a convenient and secure way to mount the Arctis Nova 7p dongle, ensuring easy placement and retrieval while keeping the dongle safe from misplaced items. Purpose It is designed to…
I may be sitting in unhealthy and weird ways, but essentially I managed to regularly press the mic mute button as well as change the volume of my headset through the back portion of my chair and in winter my sweaters were enough to reach…
I was inspired by a reddit thread in which someone made a charging station for their headphones with a magnetic charging cable you can find off of Amazon. The original user didn't share their model, so I've made one myself. It's…
A simple remix combining two existing models: one designed to house the Arctis Nova Pro Wireless Base Station, and another intended to mount headphones to the Cooler Master Qube 500 case. The result is a compact mount that places the base…
I didn't want to screw or glue the Arctis 7 Duckbill by ItsVRK so I designed a holder for it to use on a drawer of my ikea hemnes. The holder works for a 14mm thick drawer/piece of wood. I included the step file so you can adapt the…
the gap on the top is meant for a aux extensioncable so it can be hidden under the desk
I've had a Delanclip for ages and after getting the Arctis Nova headset I wanted easier way to mount it to the headset. I've ran out of zipties so I used some left over cableties to attach the part to the delanclip. Part isn't very sturdy…
|| The Picture is from my beta version || A mount for the Arctis Wireless Pro base station. I didn't want to drill and needed something with a large surface for double sided tape. There is an opening on both sides so you can flip your…
This is a holder for the USB-C wireless dongle and/or the detachable microphone for the SteelSeries Arctis 1 headphones. The dongle tucks inside, the microphone wraps around the outside. The whole thing then tucks inside one of the…
AlzaErgo Arm D35B holder for SteelSeries Arctis Nova 7 USB dongle
I'm getting a new XLR mic and needed to raise this up so I made this stand! Category: Gadgets
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
If you've also somehow managed to acquire more than the two stock battery packs that come with the Steel Series Arctis Pro Wireless headset, then this model is for you! With four easily accessible battery slots connected to a nest for the…
This is a wireless charging stand for the SteelSeries Arctis Nova Pro enabling the headphones to charge using a built in Qi charger. It requires you to add a Qi-to-USB-C adapter to the USB port on the headphones and to either remove the…
A adapter to strap a ComfortMAX headband to most Beyerdynamic Headphones
I hate it when I go around with my laptop during meetings and always have to ensure that the wireless dongle does not hang around and stresses the USB port. This ugly gadget was my first design in tinkercad. It looks like sh** but works…
This is an under the table, Steelseries Arctic pro wireless hub holder, to make your desk space nicer. Tips are much appreciated. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill:…
I need a riser cradle so my DAC sat above my keyboard. I remixed another model and created 4 variants. Remixed from PolyGone's (PolyGone_124826) fantastic Sim DAC Mount. Comes in 4 variants: 1. Flat without logo 2. Flat with logo 3.…
Designed for Tpu or other flexible material. the holes may be tight if they are a 5mm drill bit works to ream them out.
Design Concept The design of the Arctis Nova Pro Wireless Headset and Station PegBoard Holder focuses on ensuring convenient storage and easy access. Utilizing a sleek form, this holder accommodates both the headset and control station…
Just added some slots onto the headband. I did this in the slicer with a negative volume. I have no 3d modeling experience but I figured this might save someone else some time if they want to use a band with their Prusabeats. It's been…
No additional tools or pads required, just plug and play. Available as a straight piece as well as angled for better cushion seating. Reupload: https://www.thingiverse.com/thing:6395204 Original author: Okasai
NOTE: NOT YET PRINTED Headphone stand, made for Arctis Pro Wireless. You're welcome to print it. As it's not yet printed by me, if you do print it. Leave a make and tell me if it's decent. This is my original creation NOT FOR COMMERCIAL…
Do you own a IW-R1 Workstation Chair from Imperator Works? Do you own an Arctis Pro Wireless? Well, this is for you. This will hold the amp to the chair of the arm so it doesn't fall off and you lose a volume dial like I did.
