118 modeli
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Scale the model to fit your favorite beverage containers. Insert filament change script at layer 9 (or according to your desired thickness).
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Print in spiral vase mode. Optionally, mount it on a penny-weighted base . The 12th-century game of Courier Chess has both bishops and couriers. Their movements are related but not identical, so you need a different style of piece to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
Recommended order: Black, Dk Brown, Lt Brown, Grey, White or Black, Dark red, Orange, Grey, White. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When…
For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount
🇺🇸 Welcome to Houston, TX! This model was made by Nick Iland of @iland_design . The Harris County Courthouse of 1910 is in the Classical Revival architectural style and has six stories. Two courtrooms inside are two stories each. It was…
Arris Surfboard SB8200 Rack Mount Enclosure I wanted to rack mount my SB8200 but in doing so and placing it between 2 pieces of equipment it would overheat as it is passively cooled. So I set out to design an actively cooled rack mount…
For mini rack like a deskpi, this holds an Arris cable modem.
Print on it's side, with supports, to ensure maximum durability of the loop.
The Harrison M250 is a metalworking lathe, now out of production, but popular second hand in the home workshop. Change gears to cut different thread pitches are very hard to come by, and most lathes do not come with a full set. This print…
This is a server rack mount for an Arris Surfboard S33 cable modem. This is designed to require no supports when printing. I tried to allow plenty of open sections to allow heat from inside the modem to escape. This modem has a very dumb…
Will fit most Arris Surfboard Models (8200, 6141, etc). Complete re-design to fit the SB8200, re-measured, redesigned, and printed at least 10 different versions to ensure a nice fit on my own SB8200. Hopefully this fits better than…
Simply and fast printing wall / under mount for your Arris Surfboard SB8200 modem
Partially enclosed shelf for a Shaw Fibre+ Gateway modem 2.0 (XB7). Also works for Comcast XFinity TG4482 / Arris. Printed with PETG, 20% infill, no supports needed. Suggest adding a cylinder modifier around the screw holes to strengthen…
Summary I've got a small networking rack, where my router and switch are located. I've also got an NBN HFC modem, (a DOCSIS cable modem), this is produced by Arris for NBN Australia, but their enclosure is used across many different…
Arris XB6 cable modem wall mount. For Bluecurve, Helix, and Xfinity modems. Print Settings Supports: No Infill: 25 Category: Organization
Rack mount ear for the arris surfboard modems with optional fan and duct. If you need help with printing? Have questions about the designs? Want to keep up with what we're prototyping? Join our discord https://discord.gg/fb4HdDvErF
This bracket allows you to wall mount a Shaw BlueCurve cable internet modem. (Technically the ARRIS Wireless Gateway TG4482) Generically: Technicolor | CommScope CGM4331SHW | TG4482. AKA: Fibre+ Gateway 2.0 (XB7) Mount to the wall with #6…
Peaky Blinders coasters. The garrison. Shelby Bros. Designed for a Peaky Blinders themed party.
V - Juliette Parrish (Faye Grant) - 1984 3D printable model.
A Harris Hawk perched. Made for my falconer friend.
Police Academy - Thaddeus Harris - 1984 3D printable model.
A cooler for the Arris S34 modem , not sure if it fits anything else. Uses 40mm fans (I used these ) for additional cooling. Should just slide on to the top of the modem when upright. Print using supports. I printed mine in ABS, but other…
Harris Tilting Bipod tilt lock lever for the new style large diameter ribbed knob. Hardware: 1x M4x20 button head cap screw 1x M4 nylock Please see my other designs for a lever for the old style small knob.
To achieve the required strength, place on a mat according to the attached photo. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 0,1 mm Infill: 100% Filament: Prusament PETG Orange Category:…
Remix of the Arris Surfboard Modem 1U Rack Mount Brackets and Side Collar by ithackston on Thingiverse and PotatoFi. I have added slots to the Brackets, for mounting to a rack. Included reinforced brackets, try and stop the flexing of the…
Introduction I've been printing a bunch of ESRack things for my work and home racks and I've always wanted to rackmount these annoying cable boxes. Unfortunately they have a case that's almost exactly 1U high, so the standard ESRack…
Bloodshot - Raymond Ray Garrison (Vin Diesel) - 2020 3D printable model.
Wallmount for decoder VIP5202 of Arris
I wanted to make another lightsaber and remembered that Barriss was in the new Tales of the Empire series so I made her jedi lightsaber. I used the picture from the Wookiepedia page. I had to guesstimate the length, but it looked roughly…
This is designed/remixed to specifically hold the Arris Surfboard SB8200 Cable Modem and adjusted the pieces to reduce the flexing seen in other prints for this modem. Specifically, the tolerance causing the face of the mount to push…
Pokud mate TV od PODY, pravdepodobne mate tento ovladač :) Kryt na ovladač. Arris VIP1113 baterry cover byWinCZikis
This model is a bracket to mount a Commscope (formerly Arris) Touchstone CM8200 Cable Modem to an IKEA Skadis pegboard system. This modem is commonly used by the Australian National Broadband Network (NBN) for Hybrid Fibre Coaxial (HFC)…
Replacement ways wipers and tailstock wipers for the Harrison M250 Lathe. Printed in flexible TPU 100% infill.
Recording Artists - Emmy Lou Harris
Like Bryan Crow I wanted to rack-mount my Arris Surfboard SB8200, but I don't have a full-sized rack only a 10" mini-rack. Since his model is designed to be assembled, I redesigned the front-plate to be a one-piece mount appropriate for…
Lost the battery cover for one of our remotes, so I created a new one. Has reasonable parity, strong fit. I printed at an angle with the rear edge flat on the bed (hence the significant scarring), but on its side should also be good.
Harris Bipod Tilt lock lever for the old style small knob Hardware: 1x M4 x 18mm button head cap screw 1x M4 nylock Please see my other designs for a lever for the new style of knob.
Made a mount for a TV Stand to place the router on the back since putting it inside the drawer was a bad idea due to it being a enclosed space , so the next best thing was to design something simple to mount it on the back. Screws used…
FYI the fit on this isn't great - I noticed recently the measurements have been off for this model as well as others (not sure if it's always been that way or if Arris switched things a bit). Use this new model instead…
I wanted to rack-mount my cable modem, but these models are slightly taller than 1U, which requires removing the factory enclosure and retaining only the PCB and rear panel. This replacement case is designed for passive cooling, as my…
A replacement 83mm vertical blind hanger, a copy of a Harris Blind hanger from my home that broke. Will fit other blind makes as it appears to be a fairly standard design. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
A clean and simple 3D-printable placard for the Kamala Harris Tim Walz 2024 Presidential Campaign. Whipped up in about 15 minutes using OnShape. Original size is 180 x 120 x 5mm, but is easily modifiable. Insert filament change script at…
Mount your Arris TG2482A securely and cleanly to any wall with this custom-designed 3D printable bracket. It’s made specifically to fit the TG2482A modem/router and holds it snugly in place, keeping your device off desks or floors. ✅…
I have designed four Kamala/Walz themed coasters! The designs are: 1. Kamala Harris for the People (HarrisForThePeople) 2. Kamala Harris 2024 (Kamala2024): 3. Harris Walz Logo (HarrisWalzLogo): 4. Kamala Harris Face (HarrisFace): The…
I needed a solution to hide my tv box provided by NOS in Portugal. So i designed and printed this one. It's a loose design without screws, I glued mine in the wall. I had a hole to push the off button if needed. I printed in regular PLA,…
Made for my falconer friend
plaque du célèbre bar des peaky blinders impression en deux couleurs au choix
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
A wall mount for the Arris VIP5202 set-top box, known as the former (2021) set-top box of KPN, (4K version, not sure if this matters). Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…
Arris/Motorola pad holder/organizer for your line equipment pad box. It is a remix of the 10 x 5. The holes are bigger and every row is staggered up and down 4mm to make it easier to get to them. It's a little less than 70 x 65. There are…
Update version of https://www.thingiverse.com/thing:3514279 Used to mount my modem to in wall panel Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 5 Filament: atomic pla red Notes:…
12.6v?8.4v Battery lower housing/Enclosure for the TRI/TCA Harris PCR-152 Military Multiband Radio. I needed a clean, non-moulded lower battery housing for my TRI Harris PCR-152 radio as the current pack had died and I couldn't fit what I…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Easily scaled and printed. Print with letters facing up, and insert filament change script at layer 153 (or according to how you scaled it). I recommend a minimum infill of 15%. I printed the cover photo at 5% and the top surface suffered…
Simple lever that snaps onto the harris biopd leg adjustment knobs.
Quick and dirty MMU3S version, stretched on the Z-axis to separate layers.
The Harris XG-100P has a recessed SMA Female antenna connector. Only Harris antennas specific to the XG-100P will fit elegantly. Using a widely available SMA Male to BNC Female connector, this spacer gives the support and stability needed…
Just another organizer for my pad box. This is for Arris/Motorola 2 way internal splits, DC8, DC12. I wanted my 2 ways to be orderly and keep the pins from being bent. This fits the bottom left corner of my HDX pad box. I threw in slots…
Customized version of https://www.thingiverse.com/thing:4681765 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4681765 Instructions Using the following options: name = Harrison details_thickness = 1.6…
Arris/Motorola return EQ organizer for my HDX pad box. Bottom right corner. Fuse holders were added but I'm not fond of them being a little more loose than I expected. I slotted the bottom to allow the board to support and not the pins so…
HOMBRE DE HIERRO GUITARRISTA
Wall Mount for Arris TG6441. I couldn't find a ready-made model, so I drew it myself and it works great.
This is a remix of the Arris S33 model linked here. Using Orca Slicer, I've added Multiboard connectors generated by this OpenSCAD generator to the Arris S33 STL. Please note: the added connectors do block some of the rear vents. To avoid…
A mount for a GoPro that uses the 4 frame holes of the front top plate, print in TPU Could not find a mount for this frame, so i made my own
Designed to be printed using PETG or similar that can be used externally. Bed temp 80 degrees
This is a knob attachment for Harris picatinny mounted bipod. Allows you to hand tighten the mounting nut This will require the use of a soldering iron to heat set the knurled nut into the printed part. print in orientation shown
My curtains fell down when the anchor part snapped due to age. Here's a replacement anchor. NB it seems there are many many styles of anchors, this may not fit your rail. Bring your own internal plastic part. Print Settings Printer Brand:…
This is the file we have been providing to local heath services. Print instructions PLA 0.26 layer height 2 to 3 shells
This is a border for a 6x6 square tak board to demark the smaller 5x5 playing board. This design can be constructed with compass and straightedge but I lifted the png from the internet and processed it using online tools, Prusaslicer,…
Zip-Tie protection with a little bit of TPU too. And the nail polish to match.
Das Cover hat einen mininmalen Abstand zum Gehäuse, damit er auch einfach entnommen bzw. nach vorne geschoben werden kann, um schnell nachsehen zu können, welche Status-LED gerade leuchten. Mit Support drucken!
Simple lamp shade with holder intended for use with glass bottle (originally with Harris gin from outer Hebrides). Shade holder: Print with tree supports. Add perimeters and infill Lamp shade: Print in vase mode. Recommended bigger…
Newcastle galactic garrison apex legends
The original TPU bumpers I made appeared to stopped her to fast and odd things down the line broke like solder connections and LEDs. So, I made these to slow the impact down. Using 1" pipe insulation, cut to .5" and pressed into the wings…
This is a WIP. This print will add a faceplate to a Arris DG2470 Cable modem so you can rack mount it. It has a window so you can still see the LEDs on the front of the cable modem. This will be my first upload and first functional 3D…
A simple TPU printed removable arm bumper for the Arris Chameleon. With holes for an 11" Zip-Tie to bind the arms together. This helps to prevent the arms from breaking backwards during a crash and are easily replaceable if damaged. And a…
Crest of the Garrison Regiment from Attack on Titan modelled in Solidworks for printing as a dual extrusion/multi material print. I have uploaded the Solidworks files should anyone wish to tweak the model and make changes to have the…
When watching a movie with the lights off I realized the modem leds were way too bright. I decided I wanted a cover I could clip onto the modem to reduce the leds intensity a significant amount. I achieved that goal lol Printed with .2…
I wanted to mount my TV box (arris Vip2952v2) under my shelf. I could not find any bracktes, so I hopped on Fusion and designed some myself.
A simple replacement rail for certain barrister bookcases. If your existing rails look like this one (albeit broken!), hopefully this will help you out. When putting the doors back on, I found it helpful to put the rear screw in first (on…
I created this bracket to mount my Arris BGW210 (AT&T Residential Gateway) in my 19" equipment rack. I designed it as a one piece model which can be easily cut into two halves of exactly half the size for ease of printing (refer to the…
A HGLRC pole antenna mount for the Arris 250b frame, for easy unmounting for the caddix vista long range antenna for easy drone storage
This is an easy-to-print bracket so you can mount an Arris2502 set-top TV box to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
The fan pictured is a Gaiatop portable clip on fan from amazon, pretty sure it's just a rebadged mass market fan so it should work with a bunch of other ones. Prints with the fan side touching the build surface, no supports necessary.
plaque pour WC au theme peacky blinders impression 2 couleur au choix (M600)
These were originally resin printed but work good with extrusion printing if oriented properly. There's a mute for the buzzer, two ESC Shields, and Friggen LED Eyes Babby'Ya! Lol
Bracket for the KPN Arris box used the mounting points of the tv stand Print instructions Printer Brand:Prusa Printer:I3 MK3S Rafts:No Supports:No Resolution:High Infill:25% Filament: Prusament PLA
I have an Arris X80 micro drone. I really like it, but wanted a little more protection for the camera/VTX, especially the antenna. I haven't tried flying with this yet, but it should fly okay. Uses the same small rubber bands that are…
This is a Harriy Falcon Controller dummy
A 3d printed box featuring designs of hawks on each face. Please scale to whatever size you'd like.
