75 modeli
[FR] Les pièces présentées sont un dé 10 à 10 faces équilibré et un dé 100 à 10 faces équilibré, couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
[FR] La pièce présentée est un dé à 12 faces équilibré couramment utilisé en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, le modèle est composé d'une seule pièce. Imprimante :…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
[FR] Les pièces présentées sont deux dés à 6 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé de deux pièces…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
[FR] Les pièces présentées sont deux dés à 8 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé de deux pièces…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
[FR] Les pièces présentées sont trois dés à 4 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé de trois pièces…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Espresso Coffee Portafilter Stand Balanced 73m OD 58mm dia basket Stand for portafilter will rest without having to hold the handle. Small base to fit on a small scale. Stand designed to work with the portafilter of the Elektra…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Use case Shows the wind direction precisely, even if mounting pole is not perfectly upright. To achieve this, the vane and the counter weight are carefully balanced. Printing Print all parts in the uploaded orientation. To achieve a very…
[FR] La pièce présentée est un dé à 20 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé d'une seule pièce individuelle.…
Christmas Stocking Hanger for Mantle or Shelf. Balanced to stay put on the edge without sliding off. 2 versions. one with 90 degree edges and the second with rounded edges. Print on its side. For filament with poorer adhesion I recommend…
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
3MF file attached. It can be printed with no supports, but I use supports on a Bambulab P1P. PLA, 0.2 mm layer, used adaptive 0.5, 3 wall loops, 20% cubic infill, Standard Bambulab speed.
The idea is all of those filament guides exists are static, and when the head reaches some height filaments gets to bent and sometimes it gets broken and you end with a failed print, here the solution is to have a moving guide that moves…
I used OnShape to create this model. For each face, the diameter of the pips are adjusted to ratio 1/(n^(⅓)) so that the volume lost for the pips is the same across all faces. You can find the model on OnShape and copy/modify it if you…
A balanced die for use in games. My wife wanted it (well, two actually) for her Dicetower. So here it is. The die is balanced by the pips being of different depth according to the number of pips on a side. The more pips, the less depth.…
My KeyCrappie was always falling back on my desk with the weight of the switch and the key, so I just cut the original model with a plane under Meshmixer and voilà ! :)
First, all credit to Bignozz for the original idea and design. Check out the original Low-Poly Baby Yoda book stand / book end and download the low-poly Baby Yoda model. My stand should also work with his Darth Vader model. I found that…
Portafilter Stand for Lelit Bianca. Small base to easily fit on a small scale (I tare my scale to the portafilter then weigh the beans with the portafilter). Balanced so the portafilter will rest without having to hold the handle.…
It is a simple model of a dice but instead of a number being represented by the number of dimples it shows them as written arabic numbers. The depth of the numbers varies to get equal balanced sides. The arrangement of the numbers is the…
This is a printable D6 dice, which I've designed so that the pip-hole radiuses scale with how many there are on each side, to ensure they cut out an equal volume, thus keeping it volumetrically balanced & optimally fair. The faces of the…
printed with bambu p1s - 0.08mm extra fine preset default supports - yes
This die is what I use to calibrate my printer and get something useful out of the calibration. The die should be 30mmx30mmx30mm exactly. The material displaced by each sides holes has the same volum, as the total area is the same. Each…
Well balanced eyeglasses / sunglasses holder/stand. Can hold one pair, or multiple pairs. Prints with supports. simple but effective!.
This project takes its inspiration from Tensegrity, in that its supported by tethers to give the impression of floating. See: Tensegrity Planter However, this employs minimal support meaning the affect will be achieved with only 3 tethers…
SHAKY FRIES is a simple balancing game featuring unbalanced French fries/chips. Stack as many as you can. But be careful: The center of mass is different for each one. Playing the game: Setup: Attach the forks to the bowl and place the…
This is a remix of Langi70's balanced cooling duct for the Creality Sermoon D1, adapting it to use with a higher output 5015 fan. (original thing at https://www.thingiverse.com/thing:5162865 ) It does help to even out and improve cooling,…
Double handle (balanced) crank.
UPDATE use the tighter tolerances, because the other inner disk is too small This is a supportless balanced version of RyGuy3D's Mini Pocket Frisbee V2 To keep it balanced print with no bottom walls and grid infill It is a friction fit,…
Battery Holder with cable attachment for DJI FPV Goggles 2 Perfectly balanced right in the center - no uneven weight distribution to one side. No need for velcro straps, attaches to the goggles with clips on the backside. Clean cable…
Built this for myself but if anyone is interested I could parameterize the inside diameter of the bolt hole and lamp socket The only Print parameters I changed were the number of Perimeters (I used 4) to strengthen the socket and allow…
As a child, I was always baffled by the concept of these balancing toys. How do they balance I would ask myself. Contrary to popular belief, no wizard is involved. Using coins this bird is able to balance on nearly every surface you give…
3-sided dice that will need some coloring painted on the top most edge to indicate the value. Make sure the colors match the numbers! Side note - the pips have been ‘balanced’ such that the collective sum of their volume is identical on…
Hello Music and Vinyl-Fans. This is a 45rpm Vinyl Adapter which will fill your room with even more balance vibes. Size: 1.5 inches around with a 0.25 inch centerhole
Clip the Tip onto the Front of the airplane, or the back of the airplane that connects the wings
This is just another dice, but large size (25 mm) and the holes representing the pips have exactly the same volume on each face. This ensures that the centre of mass is exactly in the centre of the dice. Each size has therefore exactly…
I noticed after a lot of use stress from swinging causes the screw on the handles to fail. I filled in the bottoms of the handles to make it more durable. Aside from that design flaw, original handles are super fun to use. Added some grip…
Like the original but with a grippier ‘foot’ as I found that the original had a tendency for the bottom to pop off. Depending on shrinkage you might have to print at 101%. Additional parts required: 1 x 625ZZ Bearing 5mm x 16mm x 5mm 1 x…
Simple sign about what a balanced diet includes for MMU printing.
Parametric Statically Balanced Flycutter This thing has been inspired by Blondihacks Statically Balanced Flycutter project. Similar to her project, this Flycutter has been statically balanced, however using OpenSCAD and the free version…
Control weight with M8 nuts
Prank your friends at putt-putt or on the course with this wonky gag!
I need to drive a load at high RPM using a smooth shaft 775 DC motor. My concern is the balance of such a coupler/adapter in addition to tolerating tangential impacts without slipping. While the collet like mechanism was inspired by RC…
All indentations are made up of six small equal size squares. All numbers should be easy enough to be identified. I did a small test with the following result: in 200 throws: yielding -one: 34 -two: 41 -three: 28 -four: 32 -five: 30 -six:…
3 years after the first 180 design I decided to have 4 90 degree holes for balanced cooling. It works much better.
An amazing lamp from the 1940'3 10mm Aluminum Rods (As long as you want them, originals are ~460mm) Bunch of 3mm Nuts & Bolts 3mm Threaded Rod. 12mm x 1mm Springs about 85mm long Lamp fitting. Print Settings Printer: Delta Rafts: No…
"I've jumped from higher places." -Nea Category: 3D Printing
Puts coins to left or right hole to balance the box and guide the ball until the goal. The fortune will comes when the ball fall in th hole ;-)
Print with .1 mm layer for best quality, 100% infill is optional but gives a bit more weight. Take apart a 608 bearing (commonly known as a skateboard bearing, and of course fidget spinners) and inset one of the balls into the tip of the…
Toy Balanced Beam Scale for experiments Can add hanging baskets from one or both sides. Can also add markings to designate ounces. milligrams
I recently got a Balanced DAC, so I decided to make my own balanced XLR cable since purchasing them was so expensive. These can be made relatively inexpensive. The only thing I was missing is the part of the cable where it splits off into…
battle bot weapon concept unbalanced
just put in some lead instead of the magnet. you can leave the upper magnet in place.
Wanted to make a balanced burgee wind vane. Used Organic supports, 5mm closing radius, no interface layers, support on build plate only, branch distance 5, branch density 20%) Adjusting the infill density gets the centre of gravity about…
Balanced Breakfast is a fun and silly balancing game. The goal is to stack all the bacon, eggs, and pancakes on top of the frying pan without the tower falling over. This game can be played solo or with a friend. Players can take turns…
A 3D printed Katana designed specifically for little ninjas. Whether it's for a carnival, Halloween, or cosplay, this prop is designed with a balanced handle and customizable blade options. Blade Material Choice: Safety First (TPU/Flex):…
100% infill for best balance and clarity (but if using opaque filament, a different pattern will be fine if balanced). When printing with 100% infill, I had to use .9 extrusion multiplier or print two at a time to equalize pressure…
With Windsurfing records now exceeding 100Km/hr there is a real need for an accurate feedback for sailors. All previous systems have relied on a watch screen (impossible too see at high speed) or some sort of audible feedback. Most are…
Balanced Dice Pair – Optimized 3D Printing File Ready to test your luck? This pair of dice is designed to be printed in a single session, saving time and filament. Each dice is designed with faces that are balanced and have the same…
This pen holder's geometry supports most pens at a convenient angle while taking up only a small footprint. Visually it is a little surprising that the balance works so well given the footprint.
We were in need of a hook that would raise a hanging plant basket up some! So I modeled a perfectly balanced universal hook that I wanted to share with everyone. The bottom of the hook has a nested edge to keep the hanging object on the…
I needed to balance a Nitro engine clutch and fan block for a helicopter. As this thing is rotating around 18,000 RPM it needs to be balanced, especially on a Helicopter. The Balancer i had was not big enough, and so when i saw a DU-Pro…
A functional miniature balance scale that rests on a single finger and compares the weight of small objects. Two bowls hang from the central beam using strings or chains, tilting to show differences in mass. Suitable for physics…
I started to wonder if bed heightening would be a better solution to fix. -The good quality T8 rods are expensive -Bed height movement is slow -The need of two motors How about using belt driven bed with balancing weight (like in the…
CairnShift is a one-piece sculptural vase formed from three softly faceted, stone-like volumes that appear to balance above narrow shadow seams. Each volume shifts in a different direction and gently rotates its oval axis, creating a new…
WHO IT HELPS Mouthstick and head-pointer users (tetraplegia, ALS, SMA), people typing in bed or from a wheelchair: they need the keyboard steeply angled in front of the face, which no desk stand provides. HOW IT WORKS Two cradles slide…
G ra zręcznościowa oparta na przesypywaniu elementów w danym kolorze do odpowiedniego pojemnika. przekładanie odbywa się za pomocą narzędzia chwytającego.
A 3D printed Katana designed specifically for little ninjas. Whether it's for a carnival, Halloween, or cosplay, this prop is designed with a balanced handle and customizable blade options. Blade Material Choice: Safety First (TPU/Flex):…
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
100% infill for best balance and clarity (but if using opaque filament, a different pattern will be fine if balanced). When printing with 100% infill, I had to use .9 extrusion multiplier or print two at a time to equalize pressure…
I’ve created a new version of the Crystal Snake! This design stands out with its unique crystal-like surface texture, giving it a distinct and eye-catching look. Available versions: 25 cm and 35 cm length Separated eyes version no…
The idea is all of those filament guides exists are static, and when the head reaches some height filaments gets to bent and sometimes it gets broken and you end with a failed print, here the solution is to have a moving guide that moves…
G ra zręcznościowa oparta na przesypywaniu elementów w danym kolorze do odpowiedniego pojemnika. przekładanie odbywa się za pomocą narzędzia chwytającego.
I’ve created a new version of the Crystal Snake! This design stands out with its unique crystal-like surface texture, giving it a distinct and eye-catching look. Available versions: 25 cm and 35 cm length Separated eyes version no…
Contest entry for the OpenSauce and Prusa 3D Printed Spinning Battle Top contests. Inspired by the single-tooth offset spinners from Batlebots, this offset blade for the original 3D Printed Spinning Battle Top by stlDeniseis designed to…
![[EN] Balanced Dices 10 & 100 / [FR] Dés 10 & 100 équilibrés](https://media.printables.com/media/prints/86812/images/919430_c2e5f748-9a91-4a88-be85-610678f67824/de100c.jpg)
![[EN] Balanced Die 12 / [FR] Dé 12 équilibré](https://media.printables.com/media/prints/86705/images/917877_bfba95f3-3acc-4847-8074-985e866c3fd2/de12b.jpg)
![[EN] Balanced Dices 6 / [FR] Dés 6 équilibrés](https://media.printables.com/media/prints/88069/images/930523_7380538e-f5e0-4652-a846-15a865e66893/de6-pipe.jpg)
![[EN] Balanced Dices 8 / [FR] Dés 8 équilibrés](https://media.printables.com/media/prints/86720/images/918562_2820cda9-fe1d-4dbe-860b-4c12b2fa3635/de8b.jpg)
![[EN] Balanced Dices 4 / [FR] Dés 4 équilibrés](https://media.printables.com/media/prints/86726/images/918583_970fb9c0-38d2-465a-aa32-50b1ba1cbc24/de4.jpg)
![[EN] Balanced Die 20 / [FR] Dé 20 équilibré](https://media.printables.com/media/prints/86729/images/918647_f353152c-5e2a-4a31-88bc-38c842f89bc9/de20c.jpg)
