Wyniki wyszukiwania: ball

Rocket engine balloon

This is small fun model of rocket engine that propels an inflatable balloon. It has 3 nozzles that are in a helix shape and thus help stabilize the nominal trajectory. Baloon can get quite high, but it is prone to wind. Although this is…

Christmas Balls, Single ribbing

Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…

Christmas Ball, full cross ribs

Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).

Death Star Christmas Tree Ball

Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.

Airless basketball

This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…

Christmas Ball with Intersecting Diamonds

Update: I've uploaded new PrusaSlicer 3MF and GCODE files (look for “New settings” in the file names). These keep the hot end at 190C and use other techniques to cool the filament, so it's less likely to clog. I made a few other changes,…

Basketball Trophy / March Madness

***CHECK UPDATES BELOW*** Summary My print: https://youtube.com/shorts/qCkzSldsGnc?feature=share I wanted to challenge myself to design a March Madness trophy, so here's what I came up with. I designed it at 207mm height, and because of…

Fibonacci Golf Ball

I did not like any of the parametric golf balls I was able to find, so I designed my own. This uses the fibonacci lattice to distribute points on the surface of a sphere in a relatively even way. The included STL has a diameter of 42.7mm,…

replique ballon d'or

replique du ballon d'or football en 10 cm personnellement je l'ai print en 23

Toothpick Pocket Ballista

Travel back to the siege warfare era with the Toothpick Pocket Ballista. This miniature mechanical marvel takes inspiration from the powerful weapon of ancient times, perfectly sized to fit in your pocket. Ideal for history enthusiasts,…

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Prusa MK3/S Z-Axis-Top Ball Bearing Upgrade

You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…

Articulated Jellyfish with ball-joint tentacles

I recently had someone request that I make them a Jellyfish. I found a nice articulated model on Thingiverse but it had some issues with the .stl files and also required glue. I decided to re-mix this model and eliminate the need for…

Spiral Ribbon Christmas Ball 2025

The model has 2 small holes at the top to make it easy to add a thread to hang the ornament. The holes are great for thin threads, but may not work for everyone. I've also provided a version of the STL with no holes so you can add your…

Squash ball feet for Prusa i3 mk3s

I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…

Snap-on squash ball foot for Prusa I3

Silencing foot I designed for my Mk3S+ using the softest squash balls (double yellow dots) I was looking for something better than the original rubber pads supplied together with the printer and found the idea using soft squash balls…

Gumball and Darwin

Gumball and Darwin

Ball Pump Needle

Because those metal needles break quite easily, I needed a quick solution to inflate one of our kid's toy basketballs. There are two version: with a DIN VG 5.2 thread, which can be found on most ball pumps with a thread like Schrader…

Amazing Fortune-Telling Fidget - Quick, Magic 8 Ball inspired fidget, print in place, desk toy, fidget, no supports

We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…

Pokeball Plus Auto Catch and Spin

This is a little contraption that allows you to hold down the button on your Pokeball Plus, so that you can use it with Pokemon Go and automatically catch anything that triggers it. It's possible to to this with a rubber band or the strap…

Broly : DragonBallz

Broly : Dragonballz

Pokeball Switch Cartridge Holder

Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…

7 Dragon Balls Keychain - Dragonball

I am a huge Dragonball fan. I made these Dragon Ball keychains, I was a little undecided as to how I wanted my keychain, so I did some testing. I asked my friends which was the coolest to publish it, but they all had different opinions,…

Christmas Ball - Medium Diamond Lattice

I originally designed this as a mini ornament. It looks great at that size (1X), but looks even better at 1.5X and should look good at even larger sizes. At 1X, it's about the size of a golf ball. At 1.5X, it's a standard Christmas ball…

Christmas Ball - Alternating Diamonds

Here's a fun new Christmas ball that features alternating diamond patterns. The cover photo shows the same ornament photographed at two different angles. I printed it using a two color filament, so both the color and pattern shift as you…

Catapult Card Ball Projectile

Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL

Jojo's Bizarre Adventure Steel Ball Fidget, no supports

The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…

Balloon knot tying Tool

Reupload from Thingiverse , all credits go to the original author: https://www.thingiverse.com/thing:4899580 When sharing, please credit “ Just printed 3D ”. Whatch the linked 1 minute video to see how to use this tool! Print instructions…

Open Spiral Christmas Ball 2025

This is a fun and incredibly lightweight ornament that scales up and down beautifully. It's been printed as small as 25% and as large as 200%. I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer at 100% scale.…

Ball Puzzle - Brain teaser

A beautiful and challenging puzzle. The arcs on every piece have the same radius as the outer circle, thus any pc could potentially match along the outer edge or adjacent to any other pc where a concave curve meets a convex curve. But,…

Spaceballs Eagle 5 Flying RV

Spaceballs Eagle 5 Flying RV

Hotrod Racer Balloon Car - No Glue version

The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…

Airsoft Balls BB 6mm - Drak

Splitted design for easy modyfication in Slicer I set the blue one to print at 5 mm/s speed, to make the overhangs looks good But I also include not splitted version --- Commercial Use --- By purchasing this design on Cults , you support…

Prusa Mini Low Profile Z Axis Squash Ball Mount

Remix to add a feet to add additional support to the Z-Axis mount. The original feet for the back right for the control box is still recommended as well due to the weight distribution. Print instructions Printed in PETG @ 0.2mm layer…

Squash ball feet: the most efficient system for Prusa i3 MK3/MK3S/MK3S+ or any 30 extrusion based printer, 100% printable

If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…

Puffy Vehicles - Eagle 5 from Spaceballs

Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster

Rolling Balls Puzzle Game

The goal of the game is to sort all balls by color. The game has the same structure on the front and back, thanks to the middle piece, the balls can be transported from right to left and from front to back. You need 4 screws M3x16-20 and…

Launch : DragonBall

Paintball Marker Wall Mount

This paintball marker wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, mount the wall mount to the wall using drywall anchors (use the screw holes in the…

Minnesota Timberwolves NBA Basketball Team Logo

Minnesota Timberwolves NBA Basketball Team Logo

Low Profile Squash Ball Feet for Prusa MK4/S, MK3.9/S, MK3.5/S & i3 MK3/S/+

I liked the look of @Yosuke's Squash Ball Feet , but the added height compared to the stock feet (~10mm) made the MMU3-to-extruder tube rub against the ceiling of my enclosure just a bit too much, so I loaded in the model in Fusion 360…

BallBearing spool holder for (Un)orginal Prusa Drybox

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…

Which Ball Will Win? Gravity Physics Experiment

What the video below to see it in action! Use a pen to hold the 2 balls/marbles/bearings for a clean start and watch the bumpy road win! Ball size/weight/starting position/layer height all affect results. I used ball bearing and practived…

collectible card box (Pokemon, Magic, Baseball)

Cardbox with dividers. no supports needed.

Christmas Ball, full single ribs

Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).

Prusa i3 MK3 MK4 Squash Ball Feet System

Highlights: Noise Reduction Improved Stability. Reduces VFA & Ringing/Ghosting. 6 Support Points without increasing operational footprint. BOM: Print 6x Foot & 6x M6 Slot Nuts 6x Squash Balls (double yellow dot) 5x M6 x 12mm Bolts 5x M6…

SquashBall MK3s/MK3s+ Vibration Damper

Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…

Rugby ball All Blacks

I finished the model on the mini rugby ball just few hours before the final game starts in France. I will keep my fingers crossed to All Blacks. I could add it my mini balls collection.

Pokéball Display Stand

A Minimalistic and Super Fast Print to showcase your Pokéballs by @yoyothechicken

Floorball ball

Easily pritable with a little support around the bottom.

Balloon Dog Keychain

Easy to make a Balloon Dog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Ball

Tento míček je rozdělen na dvě poloviny s výrazně odlišnými barvami: jedna polovina je jasně červená a druhá jasně zelená. Povrch míčku je hladký a lesklý, což vytváří atraktivní vizuální efekt. Pro 3D tisk je ideální rozdělit míček na…

Soccer - football shirt keychain

Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…

Christmas Balls, Cross ribbing

Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of double ribs (depending on the size of the ball): 6, 10 and 14. Rib width 3 mm. Print the bottom part with a support so that the…

Tippmann A5 Paintball Trigger Assembly

NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…

Sharpie Golf Ball Marker

Standard size ball marker. Dimples in ring allow the ball to be turned making a straight line anywhere on the ball. Printed in PETG but any will work. Slightly flexible to allow ball insertion, and slightly snug to hold ball so you don't…

PokéBall Pencil Holder

This PokéBall-inspired pencil holder is split into separate parts for easy multi-color printing. The button is printed as a standalone piece and should be glued on after printing. The model is designed for three-color printing — either by…

Christmas Ball, full body with ribs

8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.

Logos of the College Football Teams of the ACC-Altantic Coast Conference

This is not all of the ACC Teams - as people request the additional teams I will do my best to respond. I will fill in the missing teams as they are requested - Enjoy! All gcode files are setup for manual color changes

Padel Ball Pressurizer

This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…

Snake Wrapped Around Crystal Ball

Snake Wrapped Around Crystal Ball

Baseball Bat Wall Mount

Wall mount for baseball bat Large mount ⌀ 48mm Small mount ⌀ 28mm Based on https://www.printables.com/model/50407-baseball-bat-wall-mount adapted for different sized bat. Designed using Adobe Illustrator and Autodesk Fusion 360.

Christmas Ball - Fine Diamond Lattice

I originally designed this as a mini ornament. It looks great at that size (1X), but looks even better at 1.5X and 2X. At 1X, it's about the size of a golf ball. At 1.5X, it's a standard Christmas ball size. At 2X, it's about the size of…

OpenSourcePinball Pinball Drink Mount Holder

Borrowed from OpenSourcePinball https://www.thingiverse.com/thig:2268960

Ball adding machine / Calculator (print in place, no supports) V1.0

This is simple adding machine. Main design of idea and some mechanical principles are taken from Canadian woodworker https://woodgears.ca/ I first saw his marble ball counting machine made out of wood about 10 years ago. Now I decided to…

Banksy's Flying Balloon Girl

Print with black, and add a color change around 1.30mm to switch to red. Use 0.10 or 0.20mm layers. The model can be safely downsized for a Prusa Mini.

Squash Ball Elephant Feet

This is the Squash Ball Elephant Feet. I use it underneath my Prusa MK3S+. I tried different squash ball solutions, but they all break on me (or I just use to much force). So decided to design one that just sits under the frame, taking…

Baseball Bats Puzzle

Baseball bats puzzle. Can be used as a ball stand. When printing, you need to match the flow to the plastic. So that the parts fit tightly when assembled. I came across a video on YouTube with a similar metal puzzle. I decided to make my…

Prusa Mini Base Squashball Legs

Wanted to put my upgraded Mini on Squashballs for noise reduction. I didn't modify the inserts to continue working with the USB drives and USB port since i did not use those features and had some trouble with Fusion360, so i just made…

Pickleball Paddle Keychain

Print this in two colors and glue together. This is the glue I use for PLA: https://amzn.to/48KNzPy - two part activator & CA glue. Note: you can use the activator with any CA glue (affiliate link). Inspired by the similar model by…

Baseball Card Rack

Print Settings: Use your fine tuned settings made for your printer Infill won't make a difference No supports are needed Be sure to print in proper orientation Comments: Thanks for downloading, happy printing!

Christmas Ball - Super Fine Lattice

I originally designed this as a mini ornament. It looks great at that size (1X), but looks even better at 1.5X and should look good at even larger sizes. The cover photo shows it at 1.5X (yellow cap) and the second photo shows it at 1X…

Prusa Mini Squashball Feet

A feet designed for the Prusa Mini. The feet fits normal squashballs and can be simply clicked anywhere into the 30mm aluminium extrusion.

C60 BuckyBalls

This Thing is a series of C60 buckyballs in several different versions: Balls - Just Balls B&S - Balls and Sticks Cage - Like a Cage CPK - Space Filling Model Licorice - Simply Jointed Sticks Bucky balls are actually called…

Floorball

to print in the diameter of 4 cm, use scale 57,15%.

Bambu Lab A1 Squash ball Feet

These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations. Print Settings Printer: Prusa MK4 Rafts: No Supports: Yes (The Dome for the Ball don't need Supports) Resolution: 0.15…

Meatballs Mold Final

Following testing I noticed it is difficult to press more than 7 balls at once so I made it for only 6 and also made it Print-In-Place, which makes it possible to scale down/up for your desired meatball size. It took a bit of force to get…

Muffin Topper Handball Silhouetten

Here you can find 4 different silhouettes of handball players as muffin toppers. The figures are approx. 9 cm tall, without the lower skewer. Please only use the muffin toppers for cooled muffins. Otherwise the plastic could bend :-) Have…

Prusa MINI base leg extension for squash balls

I wanted to keep my squash ball legs when adding Base legs to my Prtusa MINI. I had found the extensions by Willi which are great in design and hold well. I just added the holes for squash balls to eliminate the resonance of the cabinet…

Pokeball

Pokeball that looks great and works equally well as a decoration on your shelf or a prop for cosplay! Fair warning, it does require some soldering knowledge to wire up the electronics! Print Settings used: 0.15mm Layer height 15% infil (I…

Car Headrest Basketball Hoop

Designed this so my 2-year-old could shoot hoops while in his rear-facing car seat. Mounts through the headrest posts of our 2019 Toyota RAV4. I assume this is likely compatible with other Toyota vehicles, as well as a good deal of other…

Ballerina Coin

Coin with a ballerina engraved in it. Uses art from PublicDomainVectors.org .

OpenLock/MagBall Dungeon Tile Bases - Supportless & TrueTiles

I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…

cowboy hat towball cover

Print with supports

Rounded 6200 Ball Bearing

6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.

Mini Tabletop American Football Flick Game

Use tree supports for balls + brim for launcher. A compact tabletop American football game based on precision and flick mechanics. Place the ball on the launcher, press down, and release to shoot towards the goal. The force of the press…

Handheld radio ram ball mount

I need a place to mount my HT and speaker mic and had a ram mount system I could use.

Dragonball keychain

those who love Dragonball will appreciate it

balloon dog earrings

I printed slowly (about 30 mins per) and didn’t need supports. I used 4mm nozzle and dual color filament. If the file isn’t what you want go to imagetostl.com and change it

Stylish Retractable Ballpoint Pen - with fully functional click mechanism

This is a fully functional retractable ballpoint pen (click pen) . It combines elegance, reliability, and practicality , making it a stylish everyday writing tool. Retractable click mechanism : smooth, precise, and long-lasting…

Prusa mini squashball back foot redo/fix

I'm a huge fan of this design. It really does quiet down the Mini, quite significantly. However, I was having issues with the back foot coming off every time the printer was moved. I.e. removing the print bed, inserting the memory stick,…

Spaulding 1.75" Base plug for Basketball Hoop

Replacement plug for Spaulding basketball hoop system base. Keeps the water in. Fits snug as it, which is what you want.

Uma--Maheshvara (Ball-Gazing)

Uma--Maheshvara (Ball-Gazing) The Iconography of Play: Decoding the “Circle Mudra” in Divine Lila The vast sculptural tradition of Hinduism is governed by mudra , the precise language of hand gestures that conveys divine attributes and…

squash ball damper - toolless

Squash ball damper which can be assembled without any tool. My Prusa got extremly silent after the assembly. ball diameter: 40mm

(outdated) Prusa MK3/S Z-Axis-Top Ball Bearing Upgrade - Anti Vibration/ Anti Ghosting / Noise damper / silencer

Changes: The longer "neck" gives more surface to grip on Sturdier body, to give more strength Description: Tried the original one, was working already good Saw a video where there was a piece of paper attached to the printer to…

Tennis/Hockey Ball Wall Holder

Im obsessed with wall mounting everything. After I tripped over a few of my sons hockey balls I knew I needed another wall mount. Each extension interlocks with the one above it pretty tightly with their screw holes overlapping so they…

Animal Crossing Style Balloon Present Magnet

Hello everyone! This is the first ever model I've made. I didn't see enough Animal Crossing love here so thought I would make something from there. This prints wonderfully on its back and needs no supports. It also takes a 3 x 2 mm magnet…

Test Ball

This is a simple model to test how well your printer can print balls. I used TPU, but you can use what ever filament you want to test it with. Any settings.

Lay Z Spa Bestway Filter VI Separator for Filterballs

I've printed in PLA , no supports I'm using it with Lay-Z-Spa Santorini