7309 modeli
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My existing small bin for the rear of my X1 Carbon would fill up and either overflow or back up into the printer. What I wanted is a waste chute to move all purge material to the front of the printer that worked with the anti-vibration…
Wydruk około 20,46 €–25,00 € nettoWstępna wycena jednego wariantu
Bambu Studio Strength Walls Detect thin wall “ON” Bambu Lab Z axis cover for P1P P1S X1 Thank you ;-)
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with PLA Support and Brim not necessary (if then use tree support) 15% Infill (for better material stability use gyroid infill) To look better use the Arachne wall generator Thanks for downloading in advance and please don't forget…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the best effect, use colors that are opaque or translucent ! 🎄 Please print the base from the original link, or use the one you have already. You can find it by searching LED Lamp 001 on Maker World.
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
This is a remix of my famous Sugar Cube Tree that fits the LED Lamp Kit from BambuLabs. Tree prints with NO INFILL. No Supports - LED Kit: https://us.store.bambulab.com/products/led-lamp-kit-001?variant=41806987395208 The tree prints with…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
Overview The Engine Model Components Kit contains all the necessary hardware components for assembling an Engine Model . To complete the assembly for an entirely functional piece, users also need to download the model files and 3D print…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations. Print Settings Printer: Prusa MK4 Rafts: No Supports: Yes (The Dome for the Ball don't need Supports) Resolution: 0.15…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Maracas per bambini. Ho creato questo strumento per mia figlia con disabilità. Essendo di un diametro giusto per le dimensioni della sua mano e con un manico più lungo di quelle in commercio, riesce a farle suonare. Stampata in più…
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
The standard buffer for AMS on BambuLab printers has a wider hole for the PTFE tube, but the 4 inputs hub for multi-AMS has a 10mm wide hole. So the quickrelease buttons I found did not fit the 4 inputs hub so I designed a proper one.…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Please consider posting a make! Thank you! This is an adapter you can slide into a BambuLab Spool to make it compatible with FormFutura's ReFill spoolless filaments (750 grams). They have there own master spool but I don't want to make…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena jednego wariantu
I designed this vent system for the WhamBam HotBox to vent fumes out my office window, particularly when printing filaments like ABS. It uses a 75mm 12V blower fan, some 1/2" ID flexible tubing, and optionally hose clamps to help keep…
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
This remix is from a request to be able to print the Poop chute on a Prusa MK3 printer.
Wydruk około 24,91 €–30,45 € nettoWstępna wycena jednego wariantu
A cool model of obamnium as a octoflexi
Wydruk około 1,17 €–1,42 € nettoWstępna wycena jednego wariantu
I make a bigger and massive hinge for Bamboo doors.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is a remixed lid (cover) for the popular printable desiccant tray designed for the AMS of the Bambu Lab. The original tray by techtom.de features a recessed grip, but the curved surface of the finger handle required supports during…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FIGUR
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
Modello realizzato per il concorso fermacarte, un modello goliardico oggetto di molte discussioni nell'ultimo periodo. Il modello rende meglio con colori chiari, purtroppo avevo solo nero al momento della stampa. Il gcode e' per ender 3…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
This is a hydrometer/thermometer bracket for a P1S/X1-C. I printed Thomas' Silica Dry Box for Bambu Lab AMS and ordered the Xiaomi Hygrometer Thermometer from Amazon. Since I'm only using one of the two in the AMS, I figured I'd make a…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
Used Tinkercard to design a divider for a section of a bamboo silverware storage tray. Fits well and stays in place well using a drop of glue and double sided tape on the base. Printed in matte light brown PLA.
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Redukce pro Rosa filament na Bambulab cívku Doporučené nastavení: PETG perimetry - 3 výplň - 20% / gyroid náhodný šev Jedná se o redukci pro refil filamentu Rosa na cívku Bambulab Adapter for Rosa filament on a Bambu Lab spool Recommended…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Clamikra his Suet Ball Holder. The Suet Ball holder itself is from Clamikra, The holder for the rods is from me. This holder you can snap on the extended porch rods of the Birdfy Bamboo feeder. Just click it on and it…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…
The one spool ring to rule them all! Bambu Lab doesn't recommend using filaments with cardboard spools with the AMS, as they can produce dust and block the rollers or the cardboard edges could fray, causing issues. By snapping this model…
This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Update August 5, 2026 Hydra has been updated to version 1.13. Changes: Improved split design,…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
Remix from original model to fit the plate for Bambu Lab X1C. File uploaded is meant to be opened in Bambu Slicer. [Update] Added stl file for other slicers. Realise that some will want to print this in anticipation for the arrival of…
Hi Everyone, I had trouble having a decent print finish with the official bambu lab and generic preset. After dozen of trials and errors, I finally managed to get great results with TPU. I included the 3MF file for bambu studio with all…
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
Print this guiding template for easy placement: 0.20mm Standard @BBL X1C Place diagonally PLA Follow this picture for sticker placement: QR code for all Bambu Lab build plates: Textured plate High-Temperature plate Engineering plate Cool…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
IMPORTANT Please read the whole project posts before deciding on ARC enclosure. Download the user guide (ARC Manual), Bill of Material (BOM) and ARC Panels DXF in the “other files” section. Read the user guide to better understand how to…
README It has come to my attention that there may be a different model of AMS that this 3D model does not fit. Please check if the tabs are the larger or smaller ones before printing. Thanks Not my design but I found a another user who…
Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions. The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…
UPDATE Sep 24 2023 Before you download and print this, I made a new version with VENT Holes, check it out > DK Riser And another version of a low profile riser >> DK Riser Low Profile A Remix of Daniel's Bambu Labs Carbon X1 Top Glass…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
I included the exported files, stl, and printed images. I printed this with 10% infill and 2 walls. .20mm layer height. It uses 380.33 grams of filament with .28mm layer height at 10% infill and takes roughly 8h50mins to print on standard…
Due to the way the Bambu Lab AMS Buffer is designed, disconnecting the PTFE tube and the control cable can be difficult. The tube coupler's release ring is recessed inside the buffer, and the cable's release clip is between the cable and…
Please download from Makerworld. This STL is not the latest revision.
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
Update 03.01.2022: version v3 is available. The bend radius has been changed to roughly 40mm to address the binding issue, which could create problems when loading stiff/rough filaments. Update 29.12.2022: added new version…
Max flow test for bambulab slicer WARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “STAND” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY…
Support the designer: Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the…
To print this, use Vase Mode (Spiral) Change line widths from 0.4 to 0.7, increase by 0.3mm to each width setting Use 6 bottoms, this makes sure that the vase has a good connection to the top or bottom. Use ASA/ABS or PETG if you want…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Bambu Lab P1P Cable Chain Assembly (1/9/2023) Designed a few parts needed to attach a cable chain, similar to the one seen on the X1. The chain helps keep the USB cable and PTFE tube completely inside the P1P, which is needed if you're…
If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to Buy Me a Coffee or PayPal would be greatly appreciated!
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…
My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Desiccant box for AMS. The slim version support 44mm X 44mm X 13mm hygrometer. ----------- Here is the explanation to address some comments regarding the hole orientation. The reason I chose horizontal orientation, which results in many…
This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…
Notice! This version is obsolete. An updated version compatible with both stock and all Hydra versions is available here: https://www.printables.com/model/1633611-high-capacity-ams-silica-dry-box About This is only compatible with Hydra…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
This is a Remix “Winder Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 BEFORE STARTING THE PROJECT, YOU SHOULD CALIBRATE THE PRINTER AND FILAMENT AND PRINT THE…
