Liczymy pasujące modele…
This is a kit of a scale model of a fictional house. It is a HO 1:87 scale model. This is my second kit in my collection of miniature houses in HO scale. It requires assembly and glue. The walls and basement can snap onto the foundation…
Print with any material you would like. No support required. Please see image as reference for suggested orientation for printing.
This is a working candy claw machine that has many 3D printed parts. We shared this at ERRF 2022. Have a look at what it does here: https://youtube.com/shorts/K-8PsoMRIVw Note: Watch the different model files, you don't need to print them…
The basement key is probably one of the most important and significant objects in the series, since, as its name indicates, it is the key that opens the basement of the Jaeger house, where the secret is possibly hidden after the titans.
KG Rohr DN 200 - 1000 mm M10 Gewindestange 1000mm M8 Gewindestange für den Griff Mutter oder Flugelmuttern inkl. Beilagscheiben Es passen wenn alle Dateien 1x gedruckt worden sind folgendes hinein: 10x 0,5L Dosen 6x 0,33L Dosen 7x 0.25L…
a faucet aerator for garden / basement faucets (3/4 thread). Makes the water stream much smoother. It's build to mount it on the outside of the faucet thread. Update - finer (white version in the model photos): I've added an updated more…
Ersatzteile Kippschere für Kellerfenster ähnlich MEA 41 A 290 und 41 A 291 Spare parts for basement windows similar to MEA 41 A 290 und 41 A 291 2026-08-12: Revision 001 mit bespiegelter Führungsnut ergänzt. Nur CAD Modell geändert, nicht…
I needed to vent a new laser engraver and wanted to set something up that could slide into my basement window and have a vent for casual use to open or close if the weather was being nasty. I added ¼" weather stripping around all edges.…
Using dricore subfloor in the basement causes there to be a big heigh difference in transition in some areas where the floor is direclty applied to the concrete. Big box stores don't sell transitions that can cleanly handle these heigh…
I designed this stand for the NV-FM1 fan mount. It includes cutouts for mounting the NA-FC1 fan controller, which is held in place by the included knob, and cutouts in the back for routing cables. There are magnets already installed on…
Printed from PETG. I printed solid fill for strength. Please share your Make:)
This design is my remix of the amazing original snowmobile project by 3Drcnc. I increased the size of the center frame to accommodate Ardupilot electronics and a larger 4250 560KV motor. I also lowered the gear ratio for higher speeds and…
you need a m3 square nut an a m3 screw. this design is slightly more stable than the original Category: Replacement Parts
These are all the parts we used in the Lack enclosure restack series.
Uncle Touchy's Naked Puzzle Basement Sign, Patton Oswalt tribute. Reference: https://youtu.be/jgSC8Qle6nA?t=400 Category: Signs & Logos
Introduction I tried to print and install a quite brilliant EMS made by Fizzy Tech, but found out that it requires to disassemble whole bed and once mounted and assembled back it would be not possible to move components around. So I set…
Heavy duty hooks and a helmet stand that can be attached to the wire mesh dividers in basements, garages, etc. Has a groove down the middle so it works on both sides of the mesh. .STEP files included so you can adapt it to your needs.…
This grommet protects your shore power cable and fresh water hose as they exit the power and water bays of Tiffin Class A RVs. Tiffin installs a grommet formed from a length of rubber gasket material. With use, this gasket can become…
I used two of the symmetrical piece, which was a very tight fit. Printed 0.20mm PETG-HF.
Just a headstock cover for you Prusacaster. Printed in 2 color on the MMU2, painted in Prusa Slicer. You can use the same type of screw you use on the pick guard. Link to guitar kit for reference.…
basement window Stop bar… Holder.
You print two parts and then a 1/4-20 bolt with a ¾ washer goes on both sides along with a nut. It is a very tight fit but it will not move once bolted on.
I made a bitholder for my workshop that can be screwed onto e.g. a drywall. Ive printed it out of ABS with 4 perimiters and 25% infill with gyroid. But since its not really under any heavy load or something you can also use PLA oder PETG…
Printed 0.12mm layer height for detailed lettering. Add filament change at the height when lettering starts to print in two colours. For Bambulabs printer without AMS, use custom filament change G-code such as this:…
My basement had a sewage backup and I realized that a lot of my things could have been better protected against water damage. So I whipped up this model and got to printing. Just attach them around anything you'd like to give basic…
Floor drain cover for the utility room to allow cleaner draining of the furnace humidifier, sump pump overrun, and water heater drain. this is made from PLA and uses two stainless steel countersunk screws to hold it to the floor drain.
This is a blank cover to modify to your needs Category: Computer
Made this vent so it didn't rain directly in the tube connecting my basement with the fresh air with regular vents.
We used to have gas-exchange machine to replace the headspace of serum vial with a defined mix of gases. However, 30 ml and 50 ml vials are too light and are easily tilted by the weight of connecting tubing. Thus, we needed some sort of…
Eren's basement key from Attack on Titan anime series. I modeled the key drom reference images from the anime, using SolidWorks. I have attached the SolidWorks file if you want to have a look/modify it. The scale of the STL is…
A simple keychain model. In Slicer, you can set a double color in layers. I recommend printing with a 0.2mm nozzle. If you have only 0.4mm nozzle scale it bigger to print text correctly.
I want start out by saying this thing is large. It is 585 mm long so you’re going to need a printer capable of that size but you can cut off about 60 mm off each side if you have a printer that’s only capable of 500 mm This is made for…
If you're in the basement and 3D printing or doing laser engraving, you'll need a way to vent out. I've created a duct adapter that will allow you to connect your 4inch vent pipe to the small window openings that the basement allows. You…
I live in a crappy prefab house with questionable standards and history. I had a five inch cast iron grate shatter, and I couldn't find a replacement, so I made something that fit. I made the legs too long, but cut them to size with a…
I designed this to temporarily block a switch from turning on an exhaust fan in my basement bath. It needs to be replaced but that will require tearing down the drywall ceiling and replacing it along with the fan. I'm not in a hurry to do…
one file nail or screw to wall
Need support Law starting on the rear
Part of my State College PA bar signs collection. I made these on my Prusa Mini, so to have the color changes, I did a filament swap for each layer. Not a huge fan of this one. I made 2 different styles but only printed the one. Color…
This is an adapter if your drain in your basement is misaligned regarding height with the surrounding floor. If you add insulation in your basement and the floor level gets higher, you need to take care of your drains. This adapter does…
Softjaws for a vice in the basement. Feel free to try and reuse. Category: Tools
This model was basically created in Prusaslicer by building up individual components. I did it by setting the PRINTERS printbed size to be larger than the basement. I then cut the model up useing the cut tool. I am uploading an 3MF file…
If you want to infest a dollhouse with spiders, you can use this.
The Chris Riley I modeled during his 2nd live stream build of the Snappy printer - 3 files- number 1 - is his whole head, small size, in OBJ file format Ponytail - is his ponytail and back of head to glue onto "face" and can be printed…
I have three young ladies in my house who all have thick long hair and before the Tubshoroom https://www.tubshroom.com came along, I was getting hair clogs monthly and after the second time in a year of renting an industrial snake, I…
Replacement part for a window stay. I printed all parts solidly and bonded the axle in place using two-component adhesive. v2 features a cutout for the pin to make attaching and detaching easier
I created this cover as I didn't found the proper vent in a local shop
I created this cover as I didn't found the proper vent in a local shop Printed in ASA Outside dia: 150mm gap to cover dia: 140mm cut out for electrical tube of 20MM
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
This design was inspired by the Tiffin RV Basement Grommet designed by dnl42. His model was too narrow to fit the channel on my 2025 Tiffin Allegro Bus which is 48MM. Since i was redesigning the grommet I added the capability to have a…
Ho scale (1:87) brick basements for buildings under construction, burned or torn down. Sized similar to rectangular main street buildings (7cm x 10cm / 20 scale feet x 28 scale feet) from several scale model companies for use in town…
Simple grill cover to hide the basement hole above the hard drives of my pc case, but to also allow air circulation. Made 2 little stands to add 6x3mm magnets then glued them to the grill for a seamless fit. I used 20% infill with white…
Replacement for Small Tumble Dryer Basement Lint Filter for Zanussi Heat Pump dryer (Model: ZDH8333W) Build instructions: Source some filter fabric (I used some from an old dryer) and cut to size 46mm x 71mm. Using superglue, place a bead…
I wanted some birdhouse diversity for Black-Capped Mountain Chickdees. I previously made this one , but wanted more options as they are fickle little birdies. Although they investigated this cedar house quite a bit, they eventually ended…
SwitchBot Hub 2 case and base (optional); these need to be glued together. The base features two empty 20x20mm square recesses designed for adding weight. I inserted two coins per slot (2-euro-cent coins fit perfectly) adding up to a…
for a basement with high humidity (no climate control or heating) ive made this feet with ventilation holes.
There are two versions of the clip: a symmetrical one and a slightly off-center one. Depending on the spacing of the grid, you can use these two variants to adjust the hole position to match the grid pattern. I recommend a stainless steel…
Overview Flat drain grates at the bottom of walkout basement stairs are notorious for clogging with a single layer of wet leaves—causing rainwater to pool on the lower landing and overflow the basement door sill. This raised, perforated…
This grommet protects your shore power cable and fresh water hose as they exit the power and water bays of Tiffin Class A RVs. Tiffin installs a grommet formed from a length of rubber gasket material. With use, this gasket can become…
This design is my remix of the amazing original snowmobile project by 3Drcnc. I increased the size of the center frame to accommodate Ardupilot electronics and a larger 4250 560KV motor. I also lowered the gear ratio for higher speeds and…
Ho scale (1:87) brick basements for buildings under construction, burned or torn down. Sized similar to rectangular main street buildings (7cm x 10cm / 20 scale feet x 28 scale feet) from several scale model companies for use in town…
This design was inspired by the Tiffin RV Basement Grommet designed by dnl42. His model was too narrow to fit the channel on my 2025 Tiffin Allegro Bus which is 48MM. Since i was redesigning the grommet I added the capability to have a…
a faucet aerator for garden / basement faucets (3/4 thread). Makes the water stream much smoother. It's build to mount it on the outside of the faucet thread. Update - finer (white version in the model photos): I've added an updated more…
I designed this stand for the NV-FM1 fan mount. It includes cutouts for mounting the NA-FC1 fan controller, which is held in place by the included knob, and cutouts in the back for routing cables. There are magnets already installed on…
A basic 3d model of the key to Erens basement from the anime Attack on Titan designed for 3d printing
Handles on the windows in my basement broke pretty quickly. Seems those were made from ABS and the windows being cheap had no UV protection. So I took one that was still intact but had a crack and designed it in fusion taking measurements…
