Wyniki wyszukiwania: bio

Sortowanie

1166 modeli

P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Pobrania
3984
Polubienia
563
Ocena
4,83
P
PrintablesDaveDude

Müllbeutelrollenhalterung (Gelber Sack, k-classic Müllbeutel) - German Trash Bag Holder for Bio, Yellow, Black and Bathroom

This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…

Pobrania
474
Polubienia
75
Ocena
5
P
Printablesiamtibis

Vaccine vial holder - (Pfizer BioNTech / Moderna / AstraZeneca)

Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for hospital in Rokycany (…

Pobrania
346
Polubienia
32
Ocena
5
P
PrintablesRobagon3D

Organizer for Minecraft: Builders & Biomes

Premium player component insert is available on my Gumroads Store . Organizational insert for the board game Minecraft: Builders & Biomes by Ravensburg. My kids and I really enjoy this game but setup can be a little time consuming. I…

Pobrania
290
Polubienia
88
Ocena
5
P
Printablesmreffron

BioHazard Cell Phone Stand

Easy to print cell phone stand for portrait and landscape viewing with added biohazard so no one else touches your phone! Sits low to table and sound is amplified better than laying flat on the table. Print instructions 0.20mm Quality…

Pobrania
289
Polubienia
33
Ocena
5
P
PrintablesMatt Boyer

Biohazard Extrusion Indicator

Prints very easy. No supports required. Start with Black, then halfway through there's a M600 color change. Use whatever color you want, the shinier the better. Use two 8x3mm round magnets glued together, then glued to the back of the…

Pobrania
246
Polubienia
44
Ocena
5
P
PrintablesDanAndersen

16.5mm Waterfall for Juwel Bioflow One Aquarium Fishtank Filter

We have a Juwel 70 aquarium in my kid's room. The original air diffuser, included by the Juwel BioFlow One Filter/Heater combo works fine, the water current in the fish tank was so strong, that the fishes acted irritated. Also, the tuning…

Pobrania
239
Polubienia
38
Ocena
5
P
PrintablesSharkys

Juwel Bioflow M Filter Gitter with skimmer space

I thought I have published it but apparently not - this is simple remix of Juwel Bioflow M filter GItter so that it can be used with skimmer. I have been using it for some time already - just beware that it might require small…

Pobrania
147
Polubienia
3
Ocena
0
P
PrintablesThe Kingliest

Plant Cell Model For Desperate Biology Students

I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…

Pobrania
122
Polubienia
27
Ocena
0
P
Printables3DPrintM.D.

Seed starter for peat pellets using biodegradable PLA filament

This peat pellet holder is easy to print, and utilizes a slab modifier to create a honeycombed pattern throughout the unit. Printed using PLA “biodegradable" filament (https://www.amazon.com/dp/B0853468ZF) with 10% honeycomb fill density…

Pobrania
115
Polubienia
27
Ocena
0
P
PrintablesMrViddy

Biohazard KeyChain

I put 100% infill for best strength

Pobrania
73
Polubienia
23
Ocena
0
P
PrintablesSev

Xiaomi HEPA Filter to 140mm Arctic BioniX Fan Adapter

A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan

Pobrania
47
Polubienia
9
Ocena
0

Bestway Spare Part Leg cap (Tapa de pata de recambio)

[ English ] 3D model of the Bestway® leg cap replacement , designed to fit the bottom of the vertical frame tube. Ideal for replacing broken or missing parts. Compatible with metal frame above ground pools. Ready for 3D printing. […

Pobrania
30
Polubienia
2
Ocena
0
P
Printablesgreg.giem

Amphibious Car Paddlewheel

My kids have amphibious RC cars . They're really fast on land, but they are really slow on water because the fins built into the wheels don't have much surface area. I decided to build some snap-on paddlewheels with extra-large fins for…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesPeopleware

Lambdasondenschlüssel Pelletkessel / Lambda probe wrench for pellet boilers Buderus/Biotech/Sieger KOB

Nach 12 Jahren begann die Lambdasonde meines Pellet Kessels von Buderus im Betrieb davonzudriften, sie meldete während des Brennprozesses Werte von 12% bis 19% Sauerstoff, statt der geforderten 6%. Ich orderte die Original Bosch/Buderus…

Pobrania
3
Polubienia
1
Ocena
0
P
Printablesiczfirz

Venom Symbiotic Spider-Man Web Only. Let's Retract!

Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. To show support please like my designs. :P Time-lapse print video : https://youtu.be/SaA_DnNp9xM Category: Sculptures If you want to customize your guitar,…

Pobrania
8660
Polubienia
2083
Ocena
4,91
P
PrintablesJace1969

Predator Bio Mask

I had this one in the pipe line to do properly for a couple of years and I guess with the release of the new Predator 4 movie, then nows the right time to release it : ) P.S. Check out ReefDudes awesome build for some extra ideas.…

Pobrania
4892
Polubienia
689
Ocena
4,86
P
PrintablesMirkoFerronato

Alien Chess Set - Horror Biomechanical Xenomorph Chess Pieces

Enter a new dimension of strategy with this 3D printable alien chess set . Unique horror design : biomechanical alien-inspired pieces including pawns, rooks, knights, bishops, queen, and king. Highly detailed : intricate textures and…

Pobrania
2720
Polubienia
782
Ocena
5
P
PrintablesLayerModels

Bionic Hand art - Standard

Stunning sculpture of a life sized hand in a bionic style. An eye cathing art piece that truly shows the capabilities of 3D printing . Display on a shelf or mount it to a wall using the bayonet wall mount system. File includes left and…

Pobrania
2406
Polubienia
391
Ocena
5
P

Fox, Biomorph Statue

Fox, Biomorph Statue

Pobrania
2240
Polubienia
334
Ocena
4,88
P
Printablesbreeden

Small Plant Cell Model for Biology

The link for the multi-material model is below. Although I have a palette 2 pro that allows me to print in multi-color, I didn't want to be limited by colors and potentially failed prints. So I cut up their model and modified some of the…

Pobrania
1902
Polubienia
343
Ocena
5
P
PrintablesToolmoon

Spider Table Lamp – Bionic Wall & Desk Night Light

Striking 3D printed spider table lamp — a bionic art night light for desk or wall, casting dramatic geometric shadows. Fits the tBulb B/S dimmable USB LED module (tBulb S recommended for wall mounting). id : se1008888 size : 255X134X321mm…

Pobrania
1897
Polubienia
956
Ocena
4,93
P
PrintablesTalon K

USS Tripoli (LPH-10) Iwo Jima-class amphibious assault ship

An influential ship, with a storied history and record, the USS Tripoli is a great little desktop model. The model aims to provide a sufficient level of detail to be realistic and interesting as a desktop model, but not so saturated as to…

Pobrania
1656
Polubienia
153
Ocena
5
P
PrintablesSedimenti

Orbion - 3D Space Mouse - DIY

Orbion is a simple HID device useful for navigating the 3D interfaces of CAD programs and more. If you have inventiveness, it will continue to be useful in other areas, such as gaming. And made up of all easily available parts and with a…

Pobrania
1554
Polubienia
735
Ocena
3,8
P
PrintablesOksus

Bio Mechanical Skull

Bio Mechanical Skull

Pobrania
1376
Polubienia
322
Ocena
5
P
PrintablesJace1969

Predator Elder Bio Mask

Thanks Troy for sharing this .PDO. I still have some other files to upload which will allow for easier printing, but I thought while I had some time I'd through this up here for you to review. Cheers Jace Please note main pic is in no way…

Pobrania
1353
Polubienia
222
Ocena
5
P
PrintablesoneRyanOutta375

LEGO Technic Bionicle Ball Socket Parts

Printer Optimized recreations of the LEGO ball joint socket pieces used in Bionicle for limbs and hands. No more cracked lime green joints!

Pobrania
1351
Polubienia
152
Ocena
5
P
Printablesmaskedman

Mini 13 Spiderman Venom Symbiote Suit

This is Spiderman's Venom Symbiote suit for the MINI 13 figure by soozafone . The Spiderman-Hands.stl is made possible thanks to the MINI 13 Hand Pack by Dr Operator . The Venom-Head.stl includes recesses that fit the Venom-Eyes.stl. The…

Pobrania
1323
Polubienia
292
Ocena
4,89
P
Printablesjay16799

Bionicle Bohrok 300% Scale

Here are most of the parts required to 3D print 300% scale Bohrok. I converted the files from .dat files found in the Stud.io library, as well as some from the BioPak and SioPak part library releases. My custom modeled krana holder and…

Pobrania
1309
Polubienia
362
Ocena
5
P
PrintablesDJK

Bionic Headphone Stand (Generative Design) by David Kaden

Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)

Pobrania
1249
Polubienia
187
Ocena
5
P
PrintablesMaggot

BioShock Infinite: Vigor pack

8 Vigor bottles from BioShock Infinite

Pobrania
1222
Polubienia
182
Ocena
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Left Hand)

BioMech Finger Prosthesis In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on…

Pobrania
1215
Polubienia
133
Ocena
5
P
PrintablesDarius_sh

Bioshock Bigdaddy (Bouncer)

One part, sculpted from scratch. Suupport intensive. Category: Sculptures

Pobrania
1120
Polubienia
214
Ocena
4,8
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Right Hand)

In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…

Pobrania
1080
Polubienia
163
Ocena
3
P

Radioactive and biohazard signs

Simple signs, two color print without MMU (color changes between different layers). PLA.

Pobrania
1050
Polubienia
218
Ocena
5
P
PrintablesDruk3D.JS

Lego compatible CCBS/HeroFactory/Bionicle Arms and Legs

A selection of Lego CCBS compatible pieces. Attached pictures show examples of Bionicle MOCs build using these 3D printed arms and legs. I recommend to print in PETG (this is what I've tested). UPDATE. After few months the sockets got a…

Pobrania
930
Polubienia
83
Ocena
0
P
PrintablesPotatomasta

Symbiotic_Fury_Venom

0.12 or lower print quality. tree support organic top z distance 0.20 make support infill thin so they snap easier around mouth area.

Pobrania
891
Polubienia
212
Ocena
0
P
Printablesckk

Biohazard Extruder Visualizer

Based on the idea of many existing visualizers, see for instance Prusa's article for more information, but this one is based on the Biohazard symbol. See it in action on Youtube at https://youtu.be/k7Vee8Zn6uc . This is designed to work…

Pobrania
888
Polubienia
93
Ocena
4,76
P
Printables8-Bit Designs

Umbrella Corp. Logo w/ Slogan (Resident Evil/Biohazard) - Fridge Magnet (Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |

A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…

Pobrania
872
Polubienia
167
Ocena
4,8

Salomon Symbio Ski Boot Heel & Toe Plates

Replacement heel and toe plates for the Salomon Symbio Ski boots. Printed in PETG, TPU would be best, that's what was originally used. These are dimensionally far more accurate than what I could find on here. Replaces parts: Heel Plate…

Pobrania
860
Polubienia
38
Ocena
5
P
PrintablesDruk3D.JS

Lego Bionicle/HeroFactory Articulated Hands

The hand features a reinforced socked joint, axle hole for holding all sorts of things and a place for 4 fingers - you can either use original Lego snap on pieces or print mine, which are based on the Lego counterpart, but modded for…

Pobrania
817
Polubienia
102
Ocena
0
P
PrintablesMod20087

Bionicle Mask of Ultimate Power

Model TL;DR Recommended versions moup_titan_5.0_runes_new (large/symbols as seen in the render) moup_titan_5.0_smooth (large/no symbols) moup_5.1_villager_runes (small/symbols as seen in the render) moup_5.1_villager_smoot (small/no…

Pobrania
722
Polubienia
48
Ocena
5
P
PrintablesMeaker VI

Flywheel Nerf Blaster: Mk41 - Royobion - Protean Remix

MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…

Pobrania
705
Polubienia
668
Ocena
5
P
PrintablesLayerModels

Candle holder - Bionic multicolor design

Print a unique and colourful tealight holder. Combine different colors and create one of a kind decoration. One-part version Solid single colored holder Two-part version Print both parts seperately in different colors and snap them…

Pobrania
672
Polubienia
184
Ocena
5
P
PrintablesJon Sun

All the 118 Elements of the Periodic Table! No supports, 118 element piece puzzle chemical for school, office, lab, homeschool, display in chemistry, biology, physics, for middle/high school students. Decor present for teacher, friend student

No supports are needed!!! This is the official periodic table of ELEMENTS! All the elements, Hydrogen to Oganesson, all 118, are on the stl. file. This is a great present for a science teacher or someone who loves science! (It was mostly…

Pobrania
638
Polubienia
251
Ocena
0
P
PrintablesBrickDreams

Spider-Man in Black Symbiote Costume Brick MegaFigure (5:1 Scale)

This is a set of pieces that can be used to recreate the Spider-Man in Black Symbiote Costume figure originally published in 2012 at 500% scale. This is a rare mini-fig that was exclusively available to attendees of the San Diego…

Pobrania
617
Polubienia
109
Ocena
0
P
PrintablesDruk3D.JS

Lego Bionicle Classic Toa Mata Feet - reinforced and made printable

This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed. I recommend to print in PETG (this is what I've tested). Print with…

Pobrania
610
Polubienia
79
Ocena
0
P
PrintablesMaximilium XYZ

Left Finger BioMech Prosthesis V2 beta

Fusion 360 files released by request: This is an early release of version 2: Changes: Added 3D print support to the design. Some changes / forms created / added for future design changes. Left index – to convert to right hand use mirror…

Pobrania
603
Polubienia
88
Ocena
0
P

Out-of-Production CCBS/Bionicle/Hero Factory Bone Elements

This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…

Pobrania
599
Polubienia
75
Ocena
5
P
Printablesplague

cyberpunk 2077 biochip / relic

ripped from the files, edited slightly to be printable best to be printed on its side, with supports

Pobrania
594
Polubienia
67
Ocena
5
P
Printablesjmvspeleo

flat tweezers for biological samples

Precision tweezers for biological samples of small animals, insects, worms ... they allow animals and insects to be gently grasped without crushing them. I use this in biological samples in speleology. on the photo, the original is in…

Pobrania
588
Polubienia
82
Ocena
5
P
PrintablesBioAlex

BioSuppressor for Airsoft

A 3D printable mock suppressor for airsoft guns. The thread is inset inside the suppressor by 50mm. The suppressor is suitable for RIFs with a threading of 14mm CCW. The front end of the suppressor unscrews to allow access to the inside…

Pobrania
575
Polubienia
71
Ocena
0
P
PrintablesPlasticBarista

Biohazard - Flower pot with water tray

A planter that looks like biohazard sign from top! The cups fit Ikea Succulent 9cm Print instructions There are 4 STL files Biohazard-Base-1X.stl Biohazard-Stems-1X.stl Biohazard-Drawer-1X.stl Biohazard-Cups-3X.stl ( print 3 of these )…

Pobrania
566
Polubienia
190
Ocena
5
P
PrintablesPneulegend

Biohazard Pencil Case

Printing and assembly guide included.

Pobrania
559
Polubienia
366
Ocena
5
P
PrintablesWebmanny

WM Biocube Locline Flow

This is something I made for my Biocube 32 Gallon aquarium. I got tired of looking for something that would fit and where the connections were actually strong and not fall from just touching them. This is what worked for me and it fits my…

Pobrania
515
Polubienia
45
Ocena
0
P
PrintablesRacius.3d

Biohazard Soldier

Soldier specialized in fighting and protecting areas at risk of biological and chemical contamination. Print instructions Model cut in 7 parts to facilitate printing and making a 1/10 scale mold possible.

Pobrania
514
Polubienia
70
Ocena
5
P
PrintablesSquirrelbrain

Biomechanical Skull "Headphone Stand"

Biomechanical skull creature thing.. will hold headphones. Presliced files included as well as separate files of each part, the model has not yet been printed by myself but I'm confident they will fit together. Assembly is straight…

Pobrania
507
Polubienia
116
Ocena
0
P
PrintablesMi Réplica 3D

My Open Source Motorized Bionic Hand

With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…

Pobrania
506
Polubienia
41
Ocena
0
P
Printableskkb

BioRad compatible SDS-PAGE combs

SDS-PAGE combs, ranging from 3 to 16 wells, are designed for use with Bio-Rad electrophoresis systems. Each comb is tailored to support different sample volumes and separation requirements. Compatible with systems listed on Bio-Rad's…

Pobrania
484
Polubienia
62
Ocena
5
P
PrintablesStefan

Bio-hazard soap holder

Thought I would trying out intersections. Print instructions Category: Math Art Summary Thought I would try out intersections. Print Settings Printer: Dremel 3d40 Supports: Yes Resolution: 0.2 Filament: Dremel PLA Notes: It may be better…

Pobrania
471
Polubienia
58
Ocena
5
P
PrintablesWydrzyk

35mm convenient takeup spool for Smena, Contax, Kiev, Agat szpulka odbiorcza

Simple to print, takeup spool I made for my Smena 8 camera, It needs only a small cut on film to work. first 2-3 perforations from upper row. Cut in slicer at 37mm height. Print on flat surfaces, then glue. Layers resolution - highest…

Pobrania
459
Polubienia
18
Ocena
0
P
Printablesthall72
Pobrania
437
Polubienia
50
Ocena
0
P
PrintablesCharlie Birks

Dummy 13 Bionicle Inspired Armour

Unlike the head these are less of a copy of the original parts, mostly because I gave myself the restriction of not modifying the frame, but also because I don't have most of the parts handy to measure things exactly. I'm not entirely…

Pobrania
436
Polubienia
214
Ocena
4
P
PrintablesVader

Winter Soldier Bionic Arm

Cool wearable 3D-print of Winter Soldier's arm from the Marvel Cinematic Universe movies.

Pobrania
435
Polubienia
79
Ocena
0
P
PrintablesSASSy Design

Bio-Hex Virus

A small Art instalation showing of a virus or alien like organism helt captive in a hexasphericon bio-cell. Can be used as a thropy, sculpture or a fidget toy :D

Pobrania
430
Polubienia
127
Ocena
4,86
P

Out-of-Production CCBS/Bionicle/Hero Factory Armor Elements

This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…

Pobrania
426
Polubienia
50
Ocena
5
P
Printablesjay16799

Bionicle Bohrok Faceplate Multipart 300% Scale

The files available online from Stud.io parts packs were too low poly for my liking when increased to 300% scale, so I modeled my own version and split it into 2 parts for multicolor printing. To print both sections individually and glue…

Pobrania
411
Polubienia
32
Ocena
5
P
PrintablesStefano Barilli

Virus Bacteriophage Biology Model

Easyprinte new desktop infective bestfriend :) The capside is a icosahedron. You can print allthe parts serparatly 6 legs 1 body 1 Capside It shouldn't need any sandind, with my crappy (but lovely) 3d printer i needed a bit of sanding…

Pobrania
410
Polubienia
59
Ocena
5
P
PrintablesFluid Prints

Venom Symbiote Bust | High-Detail Horror Sculpture

💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you. If you'd like to support the channel or sell physical prints of my designs, check out the links below: 🔓 Commercial License: […

Pobrania
408
Polubienia
55
Ocena
0
P
PrintablesReProps

Kanohi Bionicle Mask(Toa Tahu)

Since today is 810nicle day I figured I'd model a Bionicle mask so here's my model of a Kanohi mask, worn mainly by the Toa Tahu. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a…

Pobrania
396
Polubienia
61
Ocena
5
P
Printableshalfpastfive

simple hook compatible with biohort garden sheds

I needed a simple hook to store light-weight power tools on the walls of my Biohort shed so I designed this. This hook can be installed in the same way as the original ones, and can hold 3 to 5kg. Tested with the following print settings:…

Pobrania
391
Polubienia
28
Ocena
4,86
P
Printablesthall72

Lego Compatible (32568.dat) Bionicle Compatible Mask Kakama

This model is compatible with the lego system.

Pobrania
391
Polubienia
49
Ocena
0
P

Out-of-Production CCBS/Bionicle/Hero Factory Accessories

This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…

Pobrania
386
Polubienia
42
Ocena
5
P
PrintablesTs3D

aquarium filter media - bioballs

print settings - perimeters- 0 bottom layers - 0 upper layers - 0 fill type - giroid fill density- 30% (fill density can be changed according to requirements) the size of the bioball can be changed as required. bacteria settle reliably in…

Pobrania
372
Polubienia
68
Ocena
0
P
PrintablesRyxxi_makes

Bioshock 2 Big sister - Repaired files

Fixed up all the missing mesh from original files. body is in the zip folder because the file was too large. Category: Video Games

Pobrania
372
Polubienia
66
Ocena
0
P
Printablesthall72

Lego Compatible (32506.dat) Technic Bionicle Claw with Axle

This model is compatible with the lego system.

Pobrania
369
Polubienia
51
Ocena
0

Bionic Bookshelf Mount

I was testing a new topology optimization software, and having issues with a real life part, decided to try the simplest thing I could think of: A shelf mount. This part is optimized for maximum load with minimal material use. The…

Pobrania
364
Polubienia
70
Ocena
4,75
P
Printables3DWP

Bioshock Big Daddy

This is a photogrammetry 3D scan I found by 3Digify, software that used cameras to construct a mesh (doesn't exist anymore). I smoothed the mesh and gave the feet flat planes so it will hopefully stand better. I also added a colored mesh…

Pobrania
364
Polubienia
34
Ocena
0
P
PrintablesPrintVision

BioFutur Hype Sneaker Prototype

This futuristic sneaker is a bold concept piece for fans of experimental design. Inspired by a fusion of alien organics and tech aesthetics, it’s perfect as a visual statement or collector’s item. ⚠ Note: This model is very difficult to…

Pobrania
343
Polubienia
75
Ocena
0
P
Printablesjay16799

Bionicle Bohrok 300% Scale Krana Holder 41673

The model for this piece available in the stud.io parts library was missing the notches for the Bohrok faceplate to latch into, so I modeled my own version based off of pictures of the original Lego piece. This model will require supports…

Pobrania
338
Polubienia
20
Ocena
5
P
PrintablesCharlie Birks

Dummy 13 Bionicle Head

Missing some details compared to the original, but also ~60% of the size. Does NOT include tiny fragile Hau. Face requires supports, “eyes” shouldn't.

Pobrania
333
Polubienia
113
Ocena
0
P
PrintablesMaEtUgR

Biohazard Sign

I used a public domain biohazard SVG symbol to design a biohazard sign to mount on a door. The size is scaled such that it exactly fits the 18x18mm print bed of the Prusa Mini. I printed it in Prusament PETG splitting the lower 2mm…

Pobrania
322
Polubienia
95
Ocena
5
P
PrintablesGiantBrain

Biohort Hook

Description This is a Hook you can use with your Biohort produkts Such as the Outdoor boxes, Garden Shed an maný others. You like my Work? Support my efforts and leave a like ❤️ Make my day and post yout Makes 🤗 Print instructions Simple…

Pobrania
321
Polubienia
30
Ocena
4,89
P

Reh, Biomorph Sculpture

Reh, Biomorph Sculpture

Pobrania
316
Polubienia
63
Ocena
5
P
PrintablesFluid Prints

symbiote Headphone Stand | Unique Gamer Gift

Disclaimer: This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…

Pobrania
314
Polubienia
58
Ocena
5
P
PrintablesRobagon3D

Board for Minecraft: Builders & Biomes

This is a accessory board for the game Minecraft: Builders & Biomes. Four copies can be printed to help align the building and item chest tiles on the table. I also made a Organizer for Minecraft: Builders & Biomes Inspired by Minecraft…

Pobrania
308
Polubienia
76
Ocena
4,86
P
PrintablesMrGlayden

Bioshock Sign

I made this model in blender using an image as a template for a friend, it will load really tiny so will have to be scaled up to your liking. I have also included the split versions which is how I printed it.

Pobrania
306
Polubienia
107
Ocena
5
P
PrintablesBotvinnik

Bio-Rad Mini Protean compatible combs

Combs compatible with Bio Rad Mini Protean polyacrilamide electrophoresis (PAGE) system. Designs for 0.75, 1 and 1.5 mm separators are available, each one with capacity for 10, 15 or Prep+1 wells. The volume of each well is indicated on…

Pobrania
305
Polubienia
15
Ocena
0
P
PrintablesSASSy Design

Bio Lantern

Biostyle inspired lantern. Looks very cool on a book shelve. Lantern - to be printed in vase mode Structure - need the addition of supports

Pobrania
304
Polubienia
193
Ocena
0
P
Printablesthall72
Pobrania
301
Polubienia
43
Ocena
0
P
PrintablesKCWarthog3D

Biohazard Coin

Biohazard Coin Category: Coins & Badges

Pobrania
291
Polubienia
50
Ocena
4,5
P
Printablesideat0m

Biohazard - Stencil template

Stencil - Biohazard Tested by applying paint with a sponge on paper and airbrush. Dimensions: 170x170x0.4mm Layer height 0.2 mm Pencils are allowed, I recommend increasing the Stencil thickness from 0.4 to approx. 0.8-1.2mm (in the Z axis)

Pobrania
290
Polubienia
60
Ocena
5
P
Printablesthall72

Lego Compatible (53583.dat) Bionicle Compatible Mask Olmak

This model is compatible with the lego system.

Pobrania
284
Polubienia
29
Ocena
0
P
PrintablesKCWarthog3D

Biohazard Keychain

Biohazard Keychain Category: Keychains

Pobrania
284
Polubienia
42
Ocena
4
P
PrintablesPraetorianCZ

QR Cover Biohazard for Ender3(v2)

Simple cover to replace the Ender QR code on the X axis. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 40 Filament: Nebula PLA Pure white Category: 3D Printer Parts

Pobrania
282
Polubienia
34
Ocena
5
P
Printablesthall72
Pobrania
277
Polubienia
30
Ocena
0
P
Printablesthall72

Lego Compatible (32577.dat) Bionicle Compatible Tohunga Torso

This model is compatible with the lego system.

Pobrania
277
Polubienia
40
Ocena
0
P
PrintablesSh0rtl

Bionic Headset Stand

CAN BE PRINTED WITHOUT SUPPORTS! The size of the model should fit almost all headphoen/headset sizes. If its to small for your headset or to big for your print area just scale the model.

Pobrania
272
Polubienia
25
Ocena
0
P
PrintablesJANUS Team

FTC BIOBUZZ Shooter

FTC BIOBUZZ 2026-2027 Shooter , its can shooting a PALLON and NECTAR

Pobrania
263
Polubienia
7
Ocena
5
P
Printablesthall72

Lego Compatible (47327.dat) Bionicle Compatible Mask Kiril (Pehkui)

This model is compatible with the lego system.

Pobrania
262
Polubienia
23
Ocena
0