5971 modeli
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Wydruk około 3,02 €–3,70 € nettoWstępna wycena jednego wariantu
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
I loved the original toroidal pull-copter design, and thought it would look cool if I combined 2 together. It weighs a little more than the original, but I feel like it's more stable in flight, and it looks cool! Prints great in PLA and…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Replacement blades for the Durafly Auto g2 V2. The blades are designed to be printed in 3 pieces with ColorFabb LW-pla (regular PLA may also work). Print vertically with no supports, no infill, using the supplied config file. I found that…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An handle for scalpel blade
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 4 bladen. Due to the success of my boat propeller with three blades, I also made one with 4 blades.
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
Possible to print in 2 colors with MMU to print logo Diameter : 40 cm
Wydruk około 10,02 €–12,24 € nettoWstępna wycena jednego wariantu
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple box with plenty of storage for used single- or double-edge razor blades. Instructions Print the One piece as is with 0.15mm layer height for smooth curves. No supports needed. The object includes support structures to reduce…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena jednego wariantu
I took another pass at a revised blade cover for Unicorn Hatmaker's Xacto Blade holder , this one is intended to fit snugly, maybe even tightly, and doesn't take as much material to print. I dare say it's significantly more refined than…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by Michael Brill 's Kenwood Chef Blade Holder , I wanted to attempt to build my own version and take the opportunity to experiment/learn more of OpenSCAD. The first blade counting from the left is facing a different way from the…
Wydruk około 5,60 €–6,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
Minimalistic design suitable for precision workshop projects.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Schubladengriff, Türgriff im Hexagonaldesign. Schraubenlöcher 4mm mit Konus für Senkkopfholzschrauben aus dem Baumarkt. Ich verwende Schrauben wie auf dem Bild zu sehen. Gerdruckt auf MK4 0.2 Speed PLA Perimeter 3x Infill 30% Viel Spaß…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…
Wydruk około 12,23 €–14,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A container to safely dispose of double edge razor blades. Print settings Material: PETG Layer height: 0.20 mm No supports. Notes Print upside down with the one-way blade slot on the print bed.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Festool Upcycling saw blade clock – Give your saw blade a second life! What are you currently doing with old saw blades? Turn them into something unique – print your own Festool saw blade clock and give them a second life. Don't have saw…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a container to store Cuisinart food processor blades. It accommodates an arbitrary number of 150mm disc blades, two DLC-10 FP-100TX steel blades, and two disc blade mounts. The Solidworks file is built with equations. Open the…
Wydruk około 20,83 €–25,46 € nettoWstępna wycena jednego wariantu
Just a fun little game that you can print and throw. Hold the leg with the hole in it in your right hand and throw with a flick at around 45 degrees to see if you can get the boomerang to return to you. I find a light weight (0.4 nozzle)…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Backstory: Ever wondered why this OneBlade does not have a case like the 360? Probably for someone to make it. My girlfriend recently bought one and asked me to make her one, so this is the outcome. The case is held clesed wit four 9*4mm…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
A replacement head for the Einhell Trimmer GC-CT 18/24. It replaces the original single-blade-head with a multi-blade head. (The provided .stl files only have three blades, but you could go with more by editing the .scad file, or using…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just minor modifications and deepened blade slot like the latest prusa design.
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple remix of the folding razor blade cutter except there are some notches in place for 45 or 68 deg. cutting of filament. This supports both 1.75mm and 2.85mm filament in 45 degrees. There is only a 1.75mm hole for the 68 degree angle…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
The legendary "Advanced Combat Blade model 90" from Battlefield 3 & 4. I designed it for a friend, who used this knife as his favourite weapon in BF3 & BF4. Our clan affectionately calls this knife “Teppichmesser” which means “box…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
scraper with replaceable blades with magnetic grip on metal surfaces and hexagonal design
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spare blade for Makita UR100D cordless grass trimmer
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A disposable blade disposal box. Print > Fill with blades > Throw away. This is an extended re-design of zapta 's Customizable X-Acto blade disposal bank (Thingiverse) . 1mm thin walls: sufficiently stable and secure, no unnecessary waste…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
handle for a metal saw blade; rúčka na pílový plát
Wydruk około 1,90 €–2,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F
Wydruk około 7,71 €–9,42 € nettoWstępna wycena jednego wariantu
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
inset jigsaw blades in slots and use drill to move wood through the holes to create dowels
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
to print the one piece scraper pause the print and install the blade with painters tape
Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu
I like flying the Blade mCPx V2 indoors or in a calm day in my back yard when I do not want to drive to an RC field to fly the larger RC helis! It is very, very tough and can take crashes without any damage except the landing gear/battery…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
This model was designed for my significant other who asked me for a cup to store her snap-offs. Parts For assembly you will need: printed parts For parts print the following: 1 x Utility_Knife_bin_lid.stl 1 x Utility_Knife_bin.stl…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blade holder - Bread Cutter Lame Designed for classic razor blades. You also need two M3 nuts and two M3 screws to tighten the blades. The main two parts must be glued together.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small box to dispose of old XACTO blades. The slot is large enough to fit #11 and #2 blades. The lid is designed to be semi-permanently snapped on, but it isn't impossible to remove in case the user wants to reuse an old blade.…
Wydruk około 4,70 €–5,75 € nettoWstępna wycena jednego wariantu
Personally wanted a more rounded design. Remodelled in Solidworks as the original file wasn't available, and corrected some of the internal faces while I was at it. Single piece, no support required. Print vertically with the opening for…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this at home, I found bay blades in my old toys and made this little stadium. 😊
Wydruk około 8,21 €–10,04 € nettoWstępna wycena jednego wariantu
I hae printed it like this: No Support PETG 0,20mm 15% Infill
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blade 330s main gear - BLH5337 replacement.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the 2014 movie, “Edge of Tomorrow” , which was an adaptation of the Hiroshi Sakurazaka novel, “All you need is kill” (2004) , this remix adds to the excellent model provided by Captain Crunch. This was a multi-week project, but…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
Box for storing Safety Razer Blades. The full box can either be thrown away completely or emptied through the removable lid. The lid is secured by a snap-fit connection to prevent accidental opening. The two parts can be printed with any…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
I've made an entirely different version of this cover if you're interested. This is a simple blade cover for the very well made Olfa Hobby Knife. I designed this because i mistakenly bought a blade holder that came with the saws and no…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2.0 mm layer height, 20% infil, 3 perimeters. Tree Supports.
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
My simplified version of Shin Hati's lightsaber scaled for a 25 mm (1") blade. The model has an internal compartment for my electronics carrier (https://www.printables.com/model/797013-lightsaber-electronics-carrier) and uses the Adafruit…
Wydruk około 12,21 €–14,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Capture the elegance and lethal precision of a 16th-century master of arms. This high-detail miniature represents an elite swashbuckler , perfect for tabletop RPGs (Rogues, Bards, or Fighters), historical dioramas, or as a standalone…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
split the model into two separate files, printing the top upside down reduces support material.
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
My Victorinox peeler melted, but the blade was still good, so I made a new handle, with inspiration from the IKEA STÄM peeler. About the Gcode uploaded: PETG; Preset 0.15 Prusa Quality Mini+; Aligned seams; 3 perimeters. No supports.…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blade 330s battery holder for SPMX22003S30 battery.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Store 7 ¼” circular saw blades with this storage case. Sharp carbide blades can be stored in your toolbox or tool bag without damage to the blades or bag. Case will hold several blades, cut foam or cardboard to put between blades for…
Wydruk około 4,52 €–5,52 € nettoWstępna wycena jednego wariantu
PLA, 0.15 - 0.2mm layers, no supports 1h37m
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Uses neodymium magnets 5x12mm cylinder (optional) internally to mount it to any piece of steel (e.g. fridge?). It also inserts 6x12x3 mm bar neodymium magnets. There are pauses in the gcode for this. This allows you to keep your jigsaws…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena jednego wariantu
Inspiriert von @araymbox (https://www.printables.com/model/149798-ikea-hemnes-shoe-cabinet-divider) habe ich für die normale Kommode mit einer Tiefe von ~43 cm eine zweiteilige Trennung konstruiert welche mittels Schwalbenschwanz…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
Supports razor blades for Leon.Reijnders model. Uses 3 M5 screws 3mm ideal length. Blades secured with M5 screws, halved
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
I was tired of the towels always being thrown onto the shelf, so I designed a hook on which you can easily hang the towels. The hooks can be attached to the handles very easily and without damaging them. If necessary, these can also be…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Yet another Hobby Knive Cap. The ones I tried did not fit the wider blades I often use, so I decided to design this one. The wider shape also prevents the knive from rolling of the table. Print parameters: PETG layerhight 0,3mm print…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the Dual Arm Blade used by Alexia Harmon in the book The Defender. This blade is attached to the forearm and in the book is launches forward 8in in front of her hand when she thrusts forward. The book is available on Amazon…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
I made this model as a visual representation for my Material Science class. Take into consideration that it is not a standard part The height is 10 cm The width is around 9 cm. Suppots are included.
Wydruk około 0,81 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A novel design of a catalytic stirrers for stirred tank reactors (CSTR and BR ) that can only be manufactured by 3D printing techniques is proposed. See the full open access paper at:: https://doi.org/10.1016/j.addma.2024.104233…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
I am a model railroad enthusiast, which involves cutting a lot of plastic and wood profiles. These cuts often need to be made at precise angles. So I created this small miter box, adapted to the blades I use (0.6 mm thick). The miter box…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
📦 Cofre Medieval para Philips OneBlade – Con Compartimentos y Secreto | Sin Soportes | Bisagra con Filamento Transformá tu kit de Philips OneBlade en un auténtico tesoro con este cofre inspirado en estética medieval , ideal para quienes…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
I created tall supports to help print this vertically.
Wydruk około 3,43 €–4,20 € nettoWstępna wycena jednego wariantu
We have a Beast Blender . The exposed blade system bothers me. I don't like it lying around, nor should it ever be mounted on the blender without one of the jar attachments (if you have one, you likely understand), however with a jar…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Ersatz Handgriff für Mars Svratka Schubladen. Wenn der Griff abbricht und in Einzelteile zerbricht oder in Verlust gerät, dann braucht man nicht die ganze Lade nachzudrucken. Den Griff schiebt man in die zwei Nuten ein welche für die…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Nothing much to add here, I hope you like it and you remake it to something epic If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
This is a replacement for the Farberware vegetable peeler part that holds the blade. The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With my first printer, I initially used a metal bed scraper, but over time, it began damaging my print bed. Seeking an alternative, I turned to a 3D printed version I found on Printables. While it served its purpose initially, it dulled…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
I created this Clay Rulers, Blades Storage Tray as an effective and efficient way to keep my clay tools in it's “place” and not all over my desk when sculpting with clay.
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
The Corter brass knife blade holder (available from Buckleguy.com) is a really nice, hefty holder for craft knife blades (X-acto style). Unfortunately it doesn't come with a cover for the blade. This is my design to fix that. Flip model…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Hi, We have a an Alligator Slicer to slice our vegetables, however after long term use the clips holding the blade block in place have broken off. So there clips are a replacement for the orignal clips.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Removed and 3D modeled from my broken Skilsaw Mitersaw 71/4 blade. #61 on drawing. 8 1/16 long 2 3/16 wide
Wydruk około 3,31 €–4,04 € nettoWstępna wycena jednego wariantu
A new easy to print bigger (than original) blade for the robo mower. This time i printed it in pctg, but anything but pla should to the trick.
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
The Zevro dry food dispenser only allows a fixed dosage per portion. But what if you want to offer less, for example half a portion? This redesign allows just that. You can use the supplied raised decks to vary the dosage. They reduce the…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this knob to fit the stone height adjuster on an Oregon Blade Grinder. Without the knob, a wrench is required to adjust the stone height. It is more convenient to adjust with a knob. The fit is designed to be very snug so it…
Wydruk około 8,21 €–10,04 € nettoWstępna wycena jednego wariantu
Inspired by the medieval world of Kingdom Come: Deliverance II, I designed a functional stand for the Philips OneBlade 360 that feels like it belongs in a craftsman's workshop or a noble's chamber. The stand combines stone-like elements…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein kleines Hilfsmittel um die äußeren Lager in den Blattgriffen entfernen zu können ohne den Blatthalter zu beschädigen. Dazu einfach aus relativ hartem Filament (PLA reicht) drucken. Anschließend wird der Blattgriff eingesteckt…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
