2146 modeli
use 1.75mm filament as hinge pin. Unsaled model holds cards up to 89mm x 58mm. Its perfect to add personal Text. I did one with two color printing with one extruder. Following the instruction on https://www.youtube.com/watch?v=0Sla-vIsvh4…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug. Design notes: The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix from @M's blank keystone, https://www.printables.com/model/239913-blank-keystone to which i added end-stops shoulders, and a few chamfers here and there. Previous design did not sit flush with my keystone panel as nothing…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blanking plate for a single slot of a 500 series audio rack. Simple print back side down.
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
I had some openings left over on a panel of the CNC controller casing, which is placed behind my milling machine. We don't want bits of metal flying in there! The “Tight” version of the files have a slightly tighter fit between the ring…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Blanking plate for holes in the dashboard of the Land Rover Defender TD5 (This may fit other models) Print instructions Material: PETG Layer Height: 0.2mm Infil: 20% Perimeters: 2 Top Layers: 4 Bottom Laters: 4 Support: Yes
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed from: https://www.prusaprinters.org/prints/2936-circuit-breaker-box-open-slot-cover Resized the original that was designed for Square D breakers to fit the narrow style GE Breakers. No supports needed. Print instructions I…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deutsche Beschreibung weiter unten. My Girlfriend's sister needed a cube which could be rewritten over and over again. This is my first approach: It is a 40mm cube with embedded faces into which (white) foils are glued. With a foil pen it…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
This is a simple 4HP eurorack blank panel. It's for keeping fingers (and loose cables!) away from the sensitive insides of a modular synth.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Blanking plate for consumer unit (Schneider Pragma Mini) Universal blanking plate for safe covering of unused module positions in consumer units. Originally designed for Schneider Pragma boards, but also compatible with many other…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Building my own homelab and just purchased the rack rails to 3d print my own components - Created these side braces to make a rack that is a little over 250mm deep to sit on my desk. I've fastened these to the rails with M5 bolts, a small…
Wydruk około 5,29 €–6,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model helps prevent accidental operation of the light switch when the lamps are controlled by motion detectors, for example. Fits for BuschJäger (BuschJaeger) Balance SI Series Dieses Modell hilft eine versehentliche Bedienung des…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Filament Feeding Dry Box Port (Blanking Plug) Requirements: Original model in use. Instructions: Print the blanking plug. Disassemble the original port and retain the spacer and nut. Reassemble the port, but use the blanking plug in place…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Ceci est une version inventé du Titan All-In-One Cooler Capswap module - blank par Corsair , Je trouve que ça permet de personnaliser chaque boitier avec un logo différent.
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.
This model was created by Amao chan over on thingyverse. Check out the original creator: https://www.thingiverse.com/amaochan or the original post: https://www.thingiverse.com/thing:6086143 This is just a reupload!
A 1U rack-mount blank for 10-inch racks. I've included three versions: A solid one. One with a honeycomb pattern. One with holes for ventilation or cables. All are 2.5mm thick. Updates (08 July 2026): I've added some blank variants that…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* The tower can fit a whole set of standard dice for storage. Put on the…
This model remixes tyler's keystone wall plate blank with minor adjustments so that is fits standard keystone jack openings and provides for stops for any faceplate or jack. See tyler's model here: Keystone Wall Plate Blank . Tyler's…
40mm height 80mm width Blank for name on trophy or pictureframe. The edges are raised so it can be printed in different color or easilly painted by paintmarker Category: 3D Printing
A 1U rack-mount blank for 19-inch racks. Printed in two parts. I've included two versions. A solid one, and another with a honeycomb pattern. Both are 4mm thick. This mount is part of a 19-inch modular rack mount system I designed, you…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
Recommended macropads 11 keys MacroPad - Seeed Xiao RP2040 - 11 keys by netpaq | Download free STL model | Printables.com 1 key Macropad - Seeed Xiao RP2040 - 1 key by netpaq | Download free STL model | Printables.com I designed this…
Very Easy to print, PLA or PETG keycap. DSA style, flat surface You can print it on flat or textured sheet Buy me a coffee if you are happy! https://coff.ee/giorgiofox3d
A 1/2U rack-mount blank for 10-inch racks. I've included a couple of different versions. Versions included Solid blank. Blank with a hole for passing cables. Blank with air vent holes. All versions come in 2.5mm and 3mm depth variants,…
Thanks to Splemsby for the original keychain model. It's a clean model and an easy print, feels good in the hand, just what I was looking for. Retro hotel keyfob / keychain with a blank face so you can add your own design. You can use 3D…
This is a award medal blank I designed. It is 88mm in diameter and 6mm thick. The recess is 4mm deep, I've found this is plenty to allow for detail on the face of the award. The loop at the top is sized for 1.5 inch ribbon.
This a universal name tag blank template which can be customized.
Blank Money Clip Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 100 Filament: PolyMaker PLA Category: Accessories
Print upside down and flat with 100% infill.
I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
This blank file can be used to design your own coin for any occasion. A competition? Baby shower? Group road trip? Custom tokens for board game night? There's a coin for that! Add a STL of your favorite logo over the center or make your…
UPDATE: Added varying severity of fillets (rounded edges/corners) for ease There are a lot of custom D20 models out there, but I didn't see any where it was blank and available for customizing… so… I watched a tutorial on how to and have…
A blank die, easy to customize. Add dots, text or images to your liking. The corners and edges are rounded so it rolls really well. Created in 123D design. Instructions Printable without support Category: Dice
Gridfinity BIN Master / Blank / F3D file
I included two variants, hollow and solid - if you want the top to have some texture and you have a textured heatbed, print the model upside down and it will look nice - solid is there so if you wanna print it rightside up then you can…
This is a blank for a keystone wall plate or patch panel. Printed and tested. Printing in the supplied orientation without rotating it ensures that the part that needs to flex isn't flexing on a layer line. Rotating it will weaken the…
For those with small print areas, you can create larger "bins" by using negative space in your gridfinity system. For example, the largest bin I can print is 4x4 and when I need a larger bin, I simply print multiple blanks to the desired…
Blank door handle for the K1. You can add a design or use a unique bed texture with any filament color to add a splash of personality to your printer! I would print with a layer height under 0.2 to ensure clean overhangs. I used 15%…
A simple blank oval keytag that can easily and quickly be customized in the slicer. Use it ti quickly add an identification to any set of keys with your name, phone number(in case you loose them), key function, number, anything you want.…
Optimized for easy printing. No supports Printer setup: Nozzle diameter 0,4 Layer height 0.2mm 100% infill Perimeters - 2
Simple blank dog tag, modeled from a real military (metal) dog tag, and then thickened slightly for strength. Category: Keychains
A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…
Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…
Key Tag Blank I have had a request for a blank tag so you can use Prusaslicer to add the text to it. They wanted to do couple of tags for their cars with the car numbers on the tag. A custom tag for use with my Key Organizer.…
Modeled the base and one with a blank flat round top. Both are ready to add your own embellishments. Printed with supports, PLA+ works great but TPU would also be fun.
Easy to print hitch covers. A blank template is included so you can add your own designs. A simple latch is included to keep everything in place. Other Hitch covers Printing PETG or better No Supports Orient with face up Suggest using…
This is a basic IO shield blank for ATX / ITX motherboards. I seem to have need for this quite often, and I like designing my IO shields in OpenSCAD since it's quick and easy to cut out the right holes using code (faster in my experience…
IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
I included two variants, hollow and solid - if you want the top to have some texture and you have a textured heatbed, print the model upside down and it will look nice - solid is there so if you wanna print it rightside up then you can…
If you need an IO shield you can simply adapt it to your mainboard. I have mine printed in PETG. I Have used Slicer modifier to create a mesh but you can also use the FreeCAD file to position your cutouts for connectors.
I have made available 1U 2U and 3U blank plates either for printing or remixing
Just simply, a blank 20 sided dice. Used for boardgames and miniature warfare. Its blank so if you want you can add your own graphics to each side when u print. Feel free to remix it with your own shapes or send me a PM if you have any…
This is a remix of PDXCNC's bins. I corrected base dimensions, and added an optional filler.
This is a blank anime style head I've created to make custom builds over. If you need easy hairstyles, I recomend grabbing them from this site: https://desktophero3d.com . Just delete all the parts, choose a hair and export the stl.…
Two different versions of XDA keycaps, modeled with FDM printing in mind. They are compatible with Cherry MX switches. Since we couldn't find any official documentation of the XDA profile, we made two different versions of the model,…
A blank version of the office sign.
All credit to whoppingpochard. This is a remix of his amazing cover. it works so well! I used this in my ceiling for access to an electrical junction box, and preferred a blank cover. All I did was remove the wording from…
These blanks are meant to be used for creating tool holders by adding holes/slots/etc. in Fusion360, TinkerCad, or your CAD app of choice. I find I'm making more blanks so I'll be adding them here in STL format. *** Updates *** 20 August,…
Couldn't buy from the local board game store so I printed my own, I plan to make moulds of these for custom dice. These have very sharp corners, which is something you can't usually get from the store bought ones. Don't step on the D4!
License Plate Frame for US plates
Do you need some keystone blanks to avoid having holes in your keystone patch panel? Then look no further! With this model you can easily fill those voids and have a nice looking rack! Do you like my models? Consider buying me a coffee ;)…
Saw another blank chest up with some holes, decided to make a cleaner one. Includes female variant.
overview this is a completely from-scratch model of Zack Freedman's Gridfinity bins for creating custom organizers to tidy up your desk drawers/tool cabinets, etc. it's intended to be: efficient (minimum number of operations on the…
1U Blank Panel A simple 3d model of a 1U Blank Panel, used for server racks Useful Links Example Server Rack
This blank capswap model will allow you to create your very own capswaps to put onto your Titan All-In-One CPU liquid coolers. The second STL / STEP file contains the base of the cooler as well (This can also be used to mount your capswap…
This is a "remix" of Quentibles Easy Gridfinity Parametric Box. It allows you to create a blank of any grid size and any height. See the notes from Quentibles original here - Easy Gridfinity Parametric Box by quentibles | Download free…
The model I remixed was a bit broken and the instructions were unclear for my smooth brain so I made a version with the back already attached so it's easier to remix. Happy making!
Prints upright without support. This model is intended with the use of a embossing feature in your favorite slicer.
original page: https://www.thingiverse.com/thing:5224200 I made this remix because the original keycaps didn't fit onto my Kailh Box switches. I can recommend using PLA, since that worked for me very well. I've also tried PETG, it works,…
Optimized for easy printing. No supports Printer setup: Nozzle diameter 0,4 Layer height 0.2mm 100% infill Perimeters - 2
DISCLAIMER: THIS IS A HARD KIT. It is a injection molding kit adapted to 3D Printing, not something like Dummy 13 that's designed to be printed. It REQUIRES resin printing to be printed at 100%, for filament printing, the minimal scale is…
Emboss the name a millimeter or two into the top of the nameplate piece then do a color swap on the top layers to make the name stand out. Simple instructions on how to customize your own nameplate in Tinkercad are located here:
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
Made from PCIE Specifications found at: http://read.pudn.com/downloads166/ebook/758109/PCI\_Express\_CEM\_1.1.pdf Note this is 0.2mm thicker than in the specifications as that makes it less fragile when printed. Print instructions…
Basically this: https://store.ui.com/us/en/category/accessories-rack-mount/collections/rackmount-keystone-blank-insert/products/uacc-keystone-blank-insert-th Update 20250726: added v2 version that might be bit stronger, did not try them…
Removed logo, back hole and remeshed.
Why I modified the model: I noticed the internal corners of the follow-me eye blanks in some fursuit heads are fairly noticeable, if the eye blanks have hard right angle internal corners. What I modified: I added 80mm radius rounded…
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
Note that the 200% version is facing text side down. Flip it if you want to add text. You can do a color change for the text to stand out :) 2025-02-25: Seems like I originally uploaded a version that was scaled up. I've added the…
This is a straightforward, support-free patch panel model offered in 10-port and 12-port variants. Designed for easy 3D printing at a 0.2 mm layer height. With a width of 254 mm, it fits diagonally on a Mk3 printer and fits larger…
Here are some 19" server rack blank plates sized at 1U, 2U, and 4U that should save you a few dollars over purchasing from Amazon or Monoprice. I printed these in PETG at 0.2 with 20% infill, but do whatever works best for you. You'll…
This file is a one to one replica of the VEX V5 license plates with modifications to the mounting holes to accommodate a 3D printer with a 0.4mm or 0.6mm nozzle. How to use this file: Download the .step or .f3d and open it in a CAD…
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
Apache 3800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
I noticed a lack of license plate blanks available so I designed one up. This should be easily customized in Prusa Slicer with text or SVGs.
A 2U rack-mount blank for 10-inch racks. I've included two versions. A solid one, and another with a honeycomb pattern. Both are 3mm thick. I've also included a .3mf file. This model is part of a series of 10-inch rack mounts I've…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Apache 2800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
Here is the Makita 700 series Fusion 360 CAD files, you can edit this one or back it up to get the raw block. https://a360.co/3vbUQFX Step files, for other CNC programs.
A blank molle patch for adding text or logos. I've included a STEP file as well to make editing easier.
![[REMIX] Filament Feeding Dry Box Port (Blanking Plug)](https://media.printables.com/media/prints/dee6509a-de6f-45da-8c63-c05150f60d72/images/11058495_7c6a25bc-0925-497d-b0b3-43b8f4ffba98_8029db91-b5c2-4682-9de5-2e61f97bb27b/pxl_20251101_213927750.jpg)
![Blank 32mm miniature base [Solid and hollow]](https://media.printables.com/media/prints/1131093/images/8534553_9f89b494-fd4b-4aa8-bbcd-335ae4053dae_94f88f29-f1a7-43f6-9169-45886fa741ba/32.png)
![Blank 25mm miniature base [Solid and hollow]](https://media.printables.com/media/prints/1131087/images/8534564_954f7239-fc40-45ff-b8a7-964195718234_d258ffb3-4879-4319-be98-06a03e84efe1/25.png)
