Wyniki wyszukiwania: blow

Sortowanie

1857 modeli

P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Pobrania
2313
Polubienia
209
Ocena
5
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Pobrania
1831
Polubienia
230
Ocena
5
P
PrintablesYosuke

Short flat nozzle for Makita blower DUB185

A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…

Pobrania
1671
Polubienia
201
Ocena
4,86
P
PrintablesMuddledRemarks

Super Stubby (SWEEPER) Nozzle for Milwaukee M18 Fuel Blower

Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…

Pobrania
1208
Polubienia
143
Ocena
5
P
PrintablesJPMakesStuff

Blower air intake cover for Ryobi P755TH

Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…

Pobrania
385
Polubienia
48
Ocena
5
P
PrintablesHermannSW

Shroud for AMD Instinct MI50 workstation GPU and BA10033B12H BBQ blower fan

Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…

Pobrania
263
Polubienia
14
Ocena
5
P
Printablesddpt

Blow gun nozzle. Embout pistolet de compresseur

Pas de support. Remplissage 100 %. 0.15 mm. Prusament PETG Clear.

Pobrania
185
Polubienia
22
Ocena
5
P
Printablessteve457

Rigid Blower Stubby Nozzle

This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…

Pobrania
175
Polubienia
16
Ocena
5
P
PrintablesAsus1357

Toro snowblower key

Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…

Pobrania
144
Polubienia
9
Ocena
0
P
Printablessteve457

Milwaukee M18 Gutter Cleaning nozzle adapter - FUEL Blower Model 3017-20

This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…

Pobrania
130
Polubienia
44
Ocena
5
P
PrintablesGTMan002

Snowblower Throttle Paddle

My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…

Pobrania
117
Polubienia
6
Ocena
0
P
PrintablesActualPepperoni

Big Bore .625 blowgun quiver guard

Lost my quiver guard for my big bore .625 blowgun, so I made a replacement that entirely covers the "razor blade" type dart. Printed in Petg, mine was quite snug. If fitment isn't sufficient, I recommend adjusting the size when slicing…

Pobrania
115
Polubienia
24
Ocena
0
P
Printablespatrickzell

Topeak JoeBlow Sport III Wallmount

Wandhalterung für eine Topeak JoeBlow Sport III Standpumpe. Damit kann die Luftpumpe an die Wand gehängt und der meist ohnehin schon begrenzte Platz in der Fahrradwerkstatt besser ausgenutzt werden. Außerdem hat sie ihren wohlverdienten…

Pobrania
101
Polubienia
19
Ocena
5
P
PrintablesGregE

Blow Torch Knob

The original knob cracked and would spin on the shaft. -Original Knob The replacement knob uses a M4 x 10mm bolt and nut to secure the knob to the flat part of the shaft. Also made larger grips on the side of the knob.

Pobrania
59
Polubienia
4
Ocena
5
P
PrintablesAndre Williams

Fan Blade for Ryobi Leaf Blower Model (RY404010VNM)

This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.

Pobrania
58
Polubienia
9
Ocena
0
P
PrintablesMasterKoopa

Blowhose mouthpiece.

Check your filament for Gcode. Or make from scratch with .STL

Pobrania
42
Polubienia
1
Ocena
0
P
PrintablesKatarn

FAT Prusa MINI+ - X Carriage - 5020 Blower

Enhance your Prusa MINI+ with this 5020 fan upgrade. Replace the MINI-x-carriage.stl part for improved layer cooling. 5020 fans mean more airflow thanks to their dual air income. This mod not only eliminates stringing but also handles…

Pobrania
41
Polubienia
13
Ocena
0
P
Printablesmattoute

BlowUp Shaky tower, pièce de rechange

Pièce de rechange pour le jeu BlowUp Shaky tower, c'est ma première mais ca fonctionne pas mal. Impression en 0.2 debout

Pobrania
27
Polubienia
0
Ocena
0
P
Printablesh2odragon

July 4 / Blow Stuff up signs

100x160mm sign, with art of a firecracker and text “Blow Stuff/Shit Up” Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesJeffCurless

Wingnut for Ariens Snow Blower

I needed two wingnuts for my snowblower. I created them, then printed with a pause to insert the nut (the thread is 5/16 x 24 (If I remember correctly). I inserted a pause just above the top of the nut. This pause is used to insert a nut,…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesNotatiation

ULTIMATE BIG BUBBLE BLOWER WITH TRAY

ULTIMATE BIG BUBBLE BLOWER Fill the Tray with dish soap, Dip the ring in the soap, and blow Extra large Bubbles! This model features a pouring spout to pour out the dish soap after you are done, and the ring doesent tip over. Print with…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesKaminoKGY

Creality K1, K1C, K1 SE & K1 Max PrusaSlicer & Cura (some profiles with Side Blower and Enclosure Fan)

Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…

Pobrania
11 901
Polubienia
294
Ocena
5
P
PrintablesUseless Ideas
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
8664
Polubienia
1859
Ocena
3,47
P
PrintablesTomek

Turbine blower (two planetary gears 36:1 - faster, stronger, louder)

My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…

Pobrania
5738
Polubienia
1712
Ocena
4,36

The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Pobrania
3737
Polubienia
378
Ocena
4,9
P
PrintablesLevi D

X-treme Blow (emergency whistle)

A perfect sized 3 gram whistle with a ring for taking it with you when your boating. You can also keep in on your backpack, keychain, in your pocket, or anywhere else! When you go boat fishing you can take it with you in case of…

Pobrania
3652
Polubienia
900
Ocena
4,53
P
Printablesl'Artilier

Colt 1911 with blowback

⚠ This replica was made for a video project and is not, in any way, meant to be prejudicial. I am not responsible for what you do with it. ⚠ Cette réplique a été faite pour un projet vidéo et n'est, en aucun cas, faites pour porter…

Pobrania
3517
Polubienia
488
Ocena
4,67
P
PrintablesWilko_SLO

Super Loud Cheer Horn (BloWer)

Printed with PLA, without support. Z=0,3 20% infill Add peace of plastic bag. The best one is tiny bag in which Prusa send parts. You can add endless multipart to the BloWer main and get deeper voice. You can remove and add parts and get…

Pobrania
3102
Polubienia
406
Ocena
4,6
P
Printablesjrmusan

Milwaukee string trimmer + Leaf blower mount

Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…

Pobrania
3000
Polubienia
418
Ocena
4,85
P
Printableslkrueg

Milwaukee M18 leaf blower nozzle

nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one

Pobrania
2782
Polubienia
292
Ocena
5
P
Printables3D-aniel

Turbine blower motor 775

Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…

Pobrania
2534
Polubienia
465
Ocena
5
P
Printablescimoalpacino

3D printed 5015 radial fan/blower

This is a 3D printed 5015 type blower/fan that is suitable for Prusa i3 or any other type of printer. I used a spare fan ( Multicomp MC36257 with sleeve as bearing) that I had laying aroung and modified it to use it with these 3D printed…

Pobrania
2306
Polubienia
214
Ocena
5
P
PrintablesLCSteve

DeWalt Leaf Blower Concentration Nozzle

I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…

Pobrania
2127
Polubienia
277
Ocena
4,7
P
PrintablesUseless Ideas

Sig P250 Toy blowback Shell ejecting kit

Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…

Pobrania
2066
Polubienia
705
Ocena
4,67
P
PrintablesUseless Ideas

Sig P250 Toy Blowback Pistol

Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…

Pobrania
1930
Polubienia
460
Ocena
4
P
PrintablesT3KMaker

Dual 5015 blower duct for Ender 3 V3 SE

Yes, A remix of a remix. TL;DR stock hotend printers use: Duct_Left_Stock.stl Duct_Right_Stock.stl ⠀ I really liked the shroud and my V3 SE was lacking in the cooling department. so after 4 test prints and a bunch of measuring I present…

Pobrania
1753
Polubienia
279
Ocena
4,88
P
PrintablesNicolas Bras

Side Blown Flute in A Major

I made a copy of one of my plastic pipe instruments to try the result, it works quite well so I share the result with you! I made a video about this project : The first version is a fully 3d printed 3 parts flute, you have to glue the…

Pobrania
1728
Polubienia
131
Ocena
4,57
P
PrintablesBM Design

Milwaukee Blower Wall Mount (M18 FBL)

Wall mount for the Milwaukee M18 MBL18 Blower Inspired by https://www.printables.com/model/580193-milwaukee-m18-blower-wall-mount-2724 but did not fit the Blower Model i had. Other mounts in photos M18 Hedge Trimmer…

Pobrania
1647
Polubienia
112
Ocena
5
P
Printableslocomoco

Ender 3 Sprite Extruder hot end fan replacement with 5015 blower

Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…

Pobrania
1513
Polubienia
230
Ocena
4,95
P
PrintablesExtrutim

Simple Dust Blower For Flex / TPU Filament

This is a really simple dust blower. Print it from TPU or a similar flexible filament. Make sure that especially the tip gets enough cooling. If the hole is not the right size, you can simply cut off the tip or heat a metal wire or…

Pobrania
1474
Polubienia
256
Ocena
4,88
P
Printablesfelipejfc

Ender 3 v3 SE 5015 blower fan ducts

I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :) I managed to print the left one without any supports and for the…

Pobrania
1325
Polubienia
195
Ocena
4,5
P
PrintablesAvel

Sovol SV06 5015 Blower Fan Duct

I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)

Pobrania
1289
Polubienia
155
Ocena
4,46
P
PrintablesJim

5015 Fan Blower Mount - Ender 3 V3 SE

This replaces the stock 4010 Fan with a 5015 Blower. Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts to mount the Fan and (2) M3x20 Pan Heads to mount the Shroud. Fans I used:…

Pobrania
1262
Polubienia
200
Ocena
4,67
P
Printableshebign

Blower fan 4020

Tout est dans le titre, blower 4020, pour modélisation de projet…

Pobrania
1257
Polubienia
34
Ocena
5

Suction Adapter for Wolfbox MF50 Mini-Blower

Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…

Pobrania
1232
Polubienia
294
Ocena
5
P
Printablesloadinglevelone

120 mm fan angle blower adapter

It's an fan adapter which takes a 120mm fan and directs the airflow 90 degrees. It's kinda a special model as I used it do direct air from the front cabin of my VW T6 back to the storage area, over the dividing wall. But the design is…

Pobrania
1222
Polubienia
228
Ocena
5
P
PrintablesTinkeringRocks

Milwaukee M18 Leaf Blower Wall Mount

I really like this style of leaf blower, but it does not store well. I built a simple wall bracket to keep it off the ground and out of the way. Print instructions Category: Outdoor & Garden

Pobrania
1212
Polubienia
161
Ocena
5
P
Printablessamwiseg0

Ego Blower Wall Mount Bracket 765CFM

The original model provided by blinkz did not work on a 765 CFM so I re-modeled it with the proper dimensions. Part is already oriented for optimal strength. Buy me a coffee If you like my work, you can buy me a coffee !

Pobrania
1206
Polubienia
119
Ocena
5
P
PrintablesStefano Rocca

Blowgun Plane Aereo

The idea is to create an easily printable object but with the characteristics of an airplane able to take flight at high speeds if fired from a blowgun. The blowgun can also be easily printed, or you can use an existing tool and print the…

Pobrania
1138
Polubienia
344
Ocena
3,75
P
Printablesrace85com

5015 Fan Blower Silencer - Snap-On

Measured dampening is 4dB on my 5015 S1 hotend mount, measured on bed. There is very small flow restriction after mounting. See my other model for the 5015 Ender 3 S1 & Sprite Extruder part cooling duct ____________________ Printing…

Pobrania
1110
Polubienia
232
Ocena
4,91
P
PrintablesAndrew

Two-Part Blow Gun with Darts

I couldn't find a cool blow-dart gun I liked, so I designed one. Could probably make a better one out of some spare PVC pipe, but this is cool too. The barrel of the blowgun is 13mm in diameter. The circular ends of the darts are also…

Pobrania
1101
Polubienia
66
Ocena
5
P
PrintablesTHE MOC CHANNEL
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1065
Polubienia
1310
Ocena
4,83
P
Printablesblinkz

Ego Blower Wall Mount Bracket 615CFM

I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…

Pobrania
1062
Polubienia
111
Ocena
4,75
P
PrintablesSonic_2_1

RC snow blower

This is the STP-file of my complete RC snow blower assembly. It was originally designed to fit with the Traxxas Summit RC car. However, I would recommend a larger RC car because the snow blower is too heavy for the Summit. Here are a few…

Pobrania
1062
Polubienia
133
Ocena
0
P
Printableskjt270000

Centrifugal Air Blower

Motors can be mounted to the blower using M3 screws or glue. The screw holes are designed for motors with a diameter of 24mm. The top part of the blower can be just clipped into place but i would recommend gluing it in to prevent any air…

Pobrania
1062
Polubienia
229
Ocena
4
P
PrintablesKiolia

Regenerative Compressor (Ring Blower, Side Channel Blower) for CPAP Cooling, etc.

Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…

Pobrania
1041
Polubienia
198
Ocena
5
P
PrintablesMattoDesign

Air Blower/Bellows Dust-Off

Made a tool for dusting off camera lenses and other equipment. There is a short and long version. Both are available with or without hole at the bottom, depending on your preferences. Without the hole at the bottom you need to take care…

Pobrania
1038
Polubienia
239
Ocena
4,82
P
PrintablesRaxius

Mk3s Blower Shorud

I've been working on an improved blower shroud based on another design on Pursa Printers. This is just a work in progress, but works fairly well. Join the discussion here:…

Pobrania
1035
Polubienia
92
Ocena
4,83
P
PrintablesOtty_Skipper

Makita blower Nozzle DUB186

Makita blower Nozzle DUB 185 Kurze nozzle um den druck zu erhöhen, ich nutze sie für die Arbeit, um meine Werkzeuge von Sägestaub zu befreien. Eignet sich aber auch, um ein Auto zu trocknen. Makita blower nozzle DUB 185 Short nozzle to…

Pobrania
1032
Polubienia
134
Ocena
4,88
P
Printablesredangel1984

Universal E3D Hemera Part Cooling Duct v2.0 for 5015 Blower

BOM (Book Of Materials): 2x M3 nuts (for the fan) 3x M3x25mm screw 1x M3x6mm screw 3x M3 Washers (for the M3x25 screws - optional) 1x 5015 Blower fan Instructions manual : https://www.thingiverse.com/download:7569024 If you dont know what…

Pobrania
1013
Polubienia
86
Ocena
5
P
Printablesuzer66

Ryobi Leaf Blower Mount

A wall mount bracket to hang the Ryobi 18V Leaf blower (Model # P2180).

Pobrania
1009
Polubienia
180
Ocena
5
P
PrintablesK2_Kevin

K2 Satsana Dual Stock Blower Fan Duct Shroud - Ender 3v2 with CRTouch

K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…

Pobrania
981
Polubienia
138
Ocena
4,9
P
Printables426HEMI

Blow Gun with Darts

This is a blowgun toy WARNING: THIS IS A TOY PLEASE DO NOT POINT AT ANY ANIMAL OR HUMAN

Pobrania
975
Polubienia
64
Ocena
0
P
PrintablesJames Chapman

Milwaukee Leaf Blower Gutter Cleaning Attachment

Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…

Pobrania
965
Polubienia
208
Ocena
5
P
PrintablesTomek

Turbine blower (with planetary gear crank)

Hi there. I'd like to present my latest project. Turbine hand cranked blower. it uses planetary gear with 1:6 ratio so for every crank turn the blades of turbine performs full six revolutions. It's great for barbecue and just for fan. All…

Pobrania
937
Polubienia
279
Ocena
4,6
P
PrintablesJoel Whitington

AD5X Recirculation Duct + Blower 5015

This AD5X recirculation duct and blower fan, A thank you to Jwidess for this design This is designed to be printed with PETG because of chamber heat, you won't need abs or asa because the chamber heat won't get that high. PETG can handle…

Pobrania
897
Polubienia
203
Ocena
4,5
P
Printables3docity

Milwaukee M18 Compact Blower Small Air Nozzle Jet

This is a nozzle that fits onto the Milwaukee m18 compact blower that I designed to be more of a jet. The original nozzle has a larger opening so I made this with a 10mm diameter opening to make it easier to blowing out my vacuum filters.…

Pobrania
877
Polubienia
113
Ocena
4,6
P
Printablesrogerquin

Back mounted cooling fan duct for SOVOL SV06 3d printer with 4010 blower fan

***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…

Pobrania
835
Polubienia
128
Ocena
4,71
P

Ender 3 V2 Neo blower fan duct

The stock blower fan was probably the most noisy part of my Ender 3 V2 Neo, so I had to order replacement on AliExpress. After the new fan arrived, I discovered that it doesn't fit the original fan duct. Initially I tried to model the…

Pobrania
834
Polubienia
130
Ocena
5
P
PrintablesRichard850

Dewalt 20V Blower Wall Hanger

A wall hanger for DCBL722

Pobrania
833
Polubienia
124
Ocena
5
P
PrintablesNickNothom

Milwaukee M18 Blower Nozzle

WARNING: Apparently this doesn't fit the newest version of the M18 Blower as they have reduced the size of the factory nozzle. A proper fit could be achieved by scaling the STL. This is a little focusing nozzle I made for my M18 Fuel Leaf…

Pobrania
819
Polubienia
168
Ocena
5
P
Printablesweberyap

EGO Blower Venturi Nozzle

I don't have an wind meter to measure specific numerical changes, but it does blow things farther. I want to say sorry to everyone who needs that clip. It was originally in my plan, but the finished product I printed shrunk a little bit…

Pobrania
814
Polubienia
104
Ocena
3
P
PrintablesPrusament

Prusa Air Blower

A nice usecase for Prusament TPU 95A. Read more in the announcement article and get your spool from our eshop .

Pobrania
804
Polubienia
260
Ocena
4,93
P
PrintablesJustForFun

Ender 3 v3 SE 5015 blower fan duct (Updated)

Hi, guys. I'm new to this forum and the whole 3D printing world, but I have upgraded my first fan duct for my Ender 3 v3 SE to dual 5015, and the performance is pretty good. The mounting hole and hook of the left-side duct are still hit…

Pobrania
804
Polubienia
122
Ocena
5

The Amonite - Sovol SV06 Fan Duct Dual 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Pobrania
803
Polubienia
112
Ocena
5

Sovol SV06 Fan Duct 5015 Blower Fan V3

New versions available: Single Fan: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v Dual Fan: https://www.printables.com/model/543502-the-amonite-sovol-sv06-fan-duct-dual-5015-blower-f Designed…

Pobrania
789
Polubienia
94
Ocena
5
P
PrintablesJLCURTIS

BiQu H2 Ender 5 Plus BlowThrough mount

Mounting is the Same as my other h2 mount https://www.printables.com/model/197289-biqu-h2-ender-5-plus-mount Nozzle to Probe -33,-11, Z should be same as stock mounts using 2 M3 x 8mm botls for the H2 and 2 M3x 8mm bolts (may want use a…

Pobrania
778
Polubienia
75
Ocena
5
P
PrintablesPHIL Sherwood

V8 Engine with Blower - 1/10 Scale

Took off transmission and added fly wheel. Scaled to 1/10 for back of RC truck.

Pobrania
770
Polubienia
141
Ocena
0
P
Printablesvajonam

ryobi workshop blower nozzle

ryobi workshop blower nozzle, remixed to bit more gradual. I use to for blowing grass off my golf cart during early and late season rounds. print upright with no supports, should print fine, needs at least 160mm z height.

Pobrania
719
Polubienia
84
Ocena
5

Oil drain guide honda snowblower

This is a extender for oil draining on a Honda snowblower with belts. -One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits…

Pobrania
708
Polubienia
32
Ocena
5
P

ELEGOO NEPTUNE 3 PRO/PLUS/MAX DUAL 5015 BLOWER FANS SHROUD W/ 8MM NOZZEL CAM CLAMP

version 2 of my dual 5015 fan upgrade for the elegoo neptune 3 pro plus and max. This model has increased air flow flow over v1. Helps keep the stepper cool by pulling air directly off uses much less support material, prints fater, and…

Pobrania
704
Polubienia
151
Ocena
5
P
PrintablesBrandon Raineri

EGO Leaf Blower Stubby Nozzle 70mm - Vase Mode - 0.8mm Nozzle

This a a stubby nozzle with a 70mm opening for EGO branded leaf blowers. This was specifically designed for the LB7650 blower but may fit other models as well (confirmed the fit works on a LB5300 as well). The design incorporates crush…

Pobrania
685
Polubienia
77
Ocena
4,67
P
Printablesirreverend

Ender 3 V3 SE 5015 Blower Duct mod

Credit to https://www.thingiverse.com/thing:6297778 for the blower mount. (EDIT found that on printables too so it's credited in the remix now, thanks T3Kmaker) Tested both versions extensively now. I'd recommend the curved version, I'm…

Pobrania
680
Polubienia
102
Ocena
4,33
P
PrintablesJim

5015 Fan Blower Mount - Left - Ender 3 V3 SE

I wanted a two-fan setup so I added this Left Side Mount to match what I had on the right. It attaches with the original M3 screw. You'll need two M3x30 machine Screws with Nuts for the Fan. If you Make this one… Be advised that you'll be…

Pobrania
675
Polubienia
121
Ocena
4,86
P
Printablescallen

Milwaukee M18 Blower Round Nozzle

A friend wanted a round nozzle to fit his Milwaukee blower. I based this design off Epicn8's design and modified it to have a round end. Since I don't own one of these blowers, I wasn't able to measure the part and fine-tune the fitment.…

Pobrania
669
Polubienia
109
Ocena
2
P
PrintablesSiggy101

Venturi PLUS nozzle for Einhell DG-10 air blowout gun

This nozzle is designed with a 3/8ths screw fitment that is compatible with the Einhell DG-10 air compressor blow out gun. All the nozzle stls I found online were for much bigger threads than the 3/8ths that the DG-10 has. It has a nice…

Pobrania
648
Polubienia
91
Ocena
4
P
PrintablesStigern

Leaf Blower Garden Gnome

Leaf Blower Garden Gnome – The Yard Enforcer! Tired of leaves messing up your garden vibe? Meet the grumpiest little lawn guardian you'll ever print – the Leaf Blower Gnome. With his serious scowl and industrial-grade blower, this guy…

Pobrania
615
Polubienia
106
Ocena
5
P
PrintablesSaxa

Blowgun Dart winged Cone caliber .625

The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…

Pobrania
608
Polubienia
62
Ocena
5
P
Printablesippe

Ryobi Workshop blower adaptor

The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all…

Pobrania
604
Polubienia
100
Ocena
5
P
Printablesasd913

Lightweight Cooler for Ender 3 / Voxelab Aquila - 5015 Blower

This is an improved version of a hotend cooler design I made a while ago. Its airflow is substantially better than the previous version. As well, you can now peek at the nozzle from the front of the machine so that you can see how the…

Pobrania
597
Polubienia
98
Ocena
5
P
PrintablesDarryl Kane

Ryobi blower nozzle

blower nozzle for the Ryobi 18v leaf blower so I can use it to blow snow off my driveway and vehicle.

Pobrania
590
Polubienia
86
Ocena
4
P
PrintablesYanno

Wall mount for Makita DUB362 Leaf Blower

Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery

Pobrania
579
Polubienia
62
Ocena
5
P
PrintablesHojoWorks.com

Nvidia Tesla P40/100 Fan Shroud For 120mm Blower (Full/Mid Tower)

A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA, etc. PWM controller makes the fan basically silent in a full tower case.…

Pobrania
571
Polubienia
29
Ocena
5
P
PrintablesCZREDER

Paw Patrol template for Blow Airbrush Pen Maker

I created simple template for Blow Pen Maker or Airbrush with Paw Patrol according to picture on internet, because original template is from carton or stronger paper and after a few used is damaged... Print Settings Printer: Home Rafts:…

Pobrania
560
Polubienia
100
Ocena
4,6
P
Printablesm00nd0gg

GTFO - Get The Fog Out! Antifog Goggle Blower

This is a strap mounted blower to keep the fog out of a pair of airsoft goggles. Dissatisfied with my ExFog unit, I decided to build a small run of an improved design. My main complaints with the ExFog unit I bought were it was too…

Pobrania
559
Polubienia
125
Ocena
5
P
Printableshebign

Blower fan 5015

Blower 5015, design homemade, pas parfait, mais plutôt correct dans l'ensemble !

Pobrania
549
Polubienia
33
Ocena
0
P
Printablescieldeb

Totoche - 3D printed Blow horn for scouting, hunting or fun

Français : J'ai créé cette totoche (jargon de scoutisme - corne de brume) pour permettre à chacun de faire la sienne soi-même, et pour avoir un style différent de la corne d'animal. Elle produit un son similaire aux modèles standards en…

Pobrania
542
Polubienia
90
Ocena
3
P
PrintablesFranckH

Mini blowtorch Skadis/Skådis holder

This is a holder for a mini blowtorch to fit on an Ikea Skådis board. The tool faces you so as to occupy the minimum board real-estate. You will probably need to print with supports for the hook part. The hook exists as a stand-alone part…

Pobrania
532
Polubienia
96
Ocena
4,56
P
PrintablesOtty_Skipper

Makita blower Nozzle DUB186

A completely revised version of my popular Makita nozzle attachment. The printing time has been reduced and the accuracy of fit has been adjusted. The new shape improves the airflow and the fan doesn't have as much back pressure. This…

Pobrania
524
Polubienia
59
Ocena
5
P
PrintablesKILLbabylon

Ender3 v3 SE/KE dual 4010 blower shroud for K1 hotend (blank/crtouch/eddy)

It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…

Pobrania
520
Polubienia
140
Ocena
3,8