Liczymy pasujące modele…
Piglet Ferdinand, familiarly called Ferda. A cute companion for every home. I also added models with three different possible butt tattoos. A heart, a four-leaf clover and a piggy. No support/no special settings.…
The case has four parts: main case top cover back cover led light carrier pieces To fully assemble the case you will need some self-tapping screws to secure the mainboard in place and also to secure and fix the rear cover to the main…
This 1U module is designed to support the Banana Pi R4 in a 10-inch rack. It is a remix of the original model found at https://www.printables.com/model/968222-banana-pi-bpi-r4-rack-mount-module. The original model was utilized to get the…
stiff Thumbick (1.8mm), printed in Prusament PetG, it works very well after some smoothening and sanding the surfaces which have Contact to the strings, with a Hairdryer it can be adapted to a perfect Fit.
Simple case for a Banana Pi BPI-P2 Zero with PoE add on I printed it in PETG, it gets a little warm with the PoE ad-on
This is mypersonal case for Banana R4 Pro. The idea comes since the initial case official released by Banana pi was way too big for me, since they want accomodate the new Wi-Fi 7 board, while my plan is to use with regular sized Wi-Fi 6E…
My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…
The Banana Pi BPI-R4 is an inexpensive, very powerfull 10G router. To mount it in my homelab server rack I designed this module for the DAP 2U Rack Mount Panel . It has a small hole to the left of the SFP+ ports, so you can see the SFP…
Design Both the Banana and the Raspberry Zero are great little devices but especially the Banana definitely needs cooling, active if possible. An antenna to improve WiFi connection is also an add on you might want to have. This design…
In the original version, I ran into a printing problem, as there are non-optimized fillets with a large overhang angle. I decided to recycle some of the parts and optimize them for more convenient printing. I also attach files in STP…
m2x10 304 stainless steel hexagonal socket screws x4 m1.6x16 304 stainless steel hexagonal socket screws x2 m1.6x10 304 stainless steel hexagonal socket screws x6 m3x8 304 stainless steel hexagonal socket screws x2 m3x10 grade 12.9…
I created my own version of a case for the Banana PI BPI-R3, designed specifically for 3D printing without supports. All parts are optimized for easy printing with minimal extra material. The front panel has snap locks for secure…
This is a remix of my two separate Rack Mount Modules: Mikrotik hEX PoE (RB960PGS) and Banana Pi BPI-R4 for the DAP 2U Rack Mount Panel . Both devices don't need 2U height, so i merged them together. Install the Mikrotik hEX PoE first.…
Thumb piece for Aergrind made by Knock https://www.madebyknock.com/ This print works have only tested with TPU
A cover to keep the temps down. Made for a 92mm Noctua fan. Two versions of the file. For different placement of the hole for wires to go through. I wired it up to the internal 12V port (CN19) Far right pin is 12V, middle two are ground,…
I was experiencing some high temps which likely caused my wan port to degrade due to me having to keep this in a closet. The model I have uploaded is slightly different than the one I printed, but it should all still fit. I increased the…
A case for Banana Pi BPI-R3-Mini and BPI-WiFi6 Mini (they are compatible), with space for internal antennas and a 37x37x24mm heatsink. Needs 4 M3 insets and screws.
// Banana Pi BPI-F3 NAS // https://github.com/landroo/OpenSCAD/tree/main/BPiNAS // Banana Pi BPI-F3 // https://www.aliexpress.com/item/1005006921744822.html // Mini PCI-E To SATA3.0 Expansion Card //…
This is a RX5808 Solderless Module Bay for RotorHazard BPill Board It is designed as a rig for testing RX5808 VRX modules, as used in RotorHazard and Delta5 race timers, as well as RX5808 diversity receivers. The rig holds little pogo…
Use this piece to prevent your metal thumbpick from being squeezed in your pocket or bag. Updated V2 2026-05
Hello, I am very new to uploading. this model is created by me. I hope it works. i printed it myself and it looks good to me :) I hope to upload more. Please if you do print, give me feedback on how I can improve. All feedback is good…
The official metal case for the Banana Pi BPi-R3 router board only provides small holes for the WPS and reset buttons, which are therefore impossible to press without tools. This small piece fits between the buttons and the case,…
A 2U rack mount that puts a Banana Pi BPI-R4 in its official black metal case into a 10 inch rack. It's built on the real EIA-310 hole pattern — 1U = 44.45 mm, 236.525 mm hole pitch, proper irregular vertical spacing — so it bolts into…
I was experiencing some high temps which likely caused my wan port to degrade due to me having to keep this in a closet. The model I have uploaded is slightly different than the one I printed, but it should all still fit. I increased the…
A case for Banana Pi BPI-R3-Mini and BPI-WiFi6 Mini (they are compatible), with space for internal antennas and a 37x37x24mm heatsink. Needs 4 M3 insets and screws.
3D printable topographic miniature of Jēkabpils - 🇱🇻 Latvia Capture the beauty of Jēkabpils 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 56.499, 25.870 (LatLng)…
