Wyniki wyszukiwania: braket

Sortowanie

Liczymy pasujące modele…

P
PrintablesMaxasRena

2020 alu profile 90° angle braket

Small angle bracket to connect to 2020 aluminium profiles (slot 6, but should work with slot 5 as well). Hole depth is 5mm, so M5x10 work fine with slot/hammerhead nuts. Printed on the side with 100% infill for max. stability.

Pobrania
256
Polubienia
28
Ocena
5
P
PrintablesChapsyl

IKEA Skadis - Tape braket

I've made a braket for my Lufkin shockforce 26' mesuring tape.

Pobrania
235
Polubienia
59
Ocena
4
P
PrintablesBennet Peters

DJI RC-Controller Lanyard Braket

To attach the braket to the controller you simply use two M4 x 8mm screws. I designed it so that the charging port is still accessible , but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And…

Pobrania
197
Polubienia
32
Ocena
5
P
PrintablesTAB

shelf braket pluggable in two parts

DOWNLOAD → ❤ I have designed a shelf holder that is very easy to assemble. it can be dismantled into two parts and can therefore be screwed together very easily. when the screws are mounted you can simply slide in the second part.

Pobrania
183
Polubienia
34
Ocena
4,67
P
PrintablesDNS

Solar Mount Braket For Heltec V4 + Battery Tray

CAD images as I didn't want to disassemble my Heltec V4 that is set up as my MQTT node. You can see photos examples here from my RAK version. The smallest size that this bracket combo will fit inside is a 5.9"x3.9"x2.8" Assembly Just…

Pobrania
147
Polubienia
17
Ocena
0
P
Printablesed

VW golf COLD AIr INTAKE BRAKET for Honda filter

VW golf COLD AIr INTAKE BRAKET abs maded for honda air filter

Pobrania
97
Polubienia
12
Ocena
0

mirror corner braket

10x10cm 12mm high

Pobrania
87
Polubienia
12
Ocena
0
P
Printablesrbelnienk182

GREATHTEK KVM Switch Mounting Braket

Print 2 Brackets, also you need 4 M3 Screws. My KVM Switch ist the 2 IN 2 OUT 4K@30HZ version from Amazon

Pobrania
87
Polubienia
8
Ocena
5
P
Printables93djen

LRS-150 Mounting braket

Designed it it mount a Meanwell LRS-150 power supply into the edge of 2 3030 Profiles. Good thing is that all Meanwell LRS-150 PSU have the same size and mounting holes, because I took the measurments at the wrong one and it still worked…

Pobrania
77
Polubienia
3
Ocena
5

servo braket

a REV servo braket

Pobrania
71
Polubienia
1
Ocena
0

Ender 3 V3 KE Sensor Support with braket

Eliminated the need for screws; the bracket now fits seamlessly on the bridge, allowing you to use your original spool support for other purposes.

Pobrania
68
Polubienia
10
Ocena
5
P
PrintablesDNS

Solar Mount Braket For RAK19003 & RAK19007 + Battery Tray

Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…

Pobrania
65
Polubienia
13
Ocena
5
P
PrintablesForgia_3D_lab

GOTHIC BRAKET for IKEA KALLAX

GOTHIC BRACKET for IKEA Kallax Transform your IKEA Kallax bookcase into a gothic work of art with these decorative brackets inspired by the stained glass windows and arches of medieval cathedrals. The intertwined lines and floral motifs…

Pobrania
57
Polubienia
38
Ocena
0

Bondtech Extruder and filament sensor braket for CR-10S

This is a remake of the CR-10S Bondech extruder part with the filament sensor housing adjusted to fit the current shipping PCB with the switch, - Original one does not line up with the filament path due to a change in the PCB design from…

Pobrania
54
Polubienia
1
Ocena
4
P
PrintablesAhmet Is

Köşe Braket 20MM

Sunta veya tahtanın kırılmasında bir köşe freni

Pobrania
53
Polubienia
7
Ocena
0
P
PrintablesTomket

40mm braket for Supermicro X10SLH-N6-ST031

I printed brackets with PETG (or use heat resistant filament), PLA was too soft after test (coolers have 66°C under heavy load). Don't forget to replace heat-conducting pasta. I designed brackets with some tolerance - space for the…

Pobrania
53
Polubienia
7
Ocena
0
P
Printablesstelikas

corner braket

test braket

Pobrania
48
Polubienia
4
Ocena
0

ZSA Navigator Brakets for Thumb Trackball Setup

These brackets let you customize how the Navigator trackball integrates with your Voyager keyboard . They reuse the magnet, screws, and back-plate from the original Navigator mount or buy 60x13.5x5mm magnets for example from Amazon and…

Pobrania
47
Polubienia
6
Ocena
5
P
PrintablesAhmet Is

Köşe Braket 40MM

Sunta veya tahta birleştirmede bir kullanılan bir köşe braket

Pobrania
45
Polubienia
10
Ocena
0
P
PrintablesAhmet Is

Köşe Braket 40MM

Sunta veya tahtanın kırılmasında bir köşe braketi

Pobrania
39
Polubienia
7
Ocena
0
P
PrintablesEmanuelTB

Rook MK1 SKR Mini E3 and Orange Pi zero 2 mounting braket

Mounting braket for your SKR Mini E3-V3 and Orange Pi zero 2. 9 M3 threaded inserts.

Pobrania
39
Polubienia
10
Ocena
0
P
PrintablesMagig_I3Prusa

A2Z Letter CLICK Chain Braket

This is a MUST have for every Kindergarden or School,Townmeeting,50Year party just click the name together prints in 0,2 layer 10% infill

Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesStenno23

BLV MGN CUBE Braket

Reinforcement and stiffening bracket for the front part. Connect the 2020 front profile to the 2040 side profile. Printed in ASA 3DO, 0.3mm layer height, 5 perimeters and 31% infill. Extra material: 4x M3x10 hex head screws 4x M3 T nuts

Pobrania
36
Polubienia
8
Ocena
0
P
PrintablesAhmet Is

Köşe Braket 20MM

Sunta veya tahta birleştirmede kullanılabilen bir köşe braket

Pobrania
35
Polubienia
8
Ocena
0
P
Printablesadamz01h

EVGA 2070 120mm Fan Adapter braket

use the original screws

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesBounet

half inch tube braket

Pretty self explanatory, just a bracket to hold 1/2"pipe or tube. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Parts

Pobrania
29
Polubienia
7
Ocena
0
P
PrintablesShanold

90 degreebraket Repaired

The origanal wouldn't 3d print so I fixed it in blender and now slices properly Category: Replacement Parts

Pobrania
25
Polubienia
8
Ocena
0
P
PrintablesSica

Soft corner braket for aluminium case

The front of a DIY flight case needed some corner brakets.

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesKyle

Zetlight Qmaven 2 6800 Hanger Braket

Zetlight Qmaven 2 6800 Hanger Braket, The end cap on the end farthest from the power input can pull of if you remove the two screws. Be careful of little leds they use for side lighting the fixture, slide two on, and reattach the end…

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesHodoodle

Shelf Braket

A simple shelf bracket I put together. It uses Command Strips.

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesNadir @ CN3D

mosfet braket modified to fit on my ender 6

I have slightly modified the design to fit under the speaker next to the motherboard

Pobrania
21
Polubienia
5
Ocena
0
P
PrintablesTorsten Brumm

Gridfinity - Braket for Rockseed Cross Line Laser

Gridfinity Halter für den Kreuzlinienlaser von Rockseed . Passend als 2x2 Box.

Pobrania
21
Polubienia
1
Ocena
0
P

Modified Psion 5 Display Braket

Display bracket for my project to upgrade Psion Series 5 with new internals and new 5" display. See more project details at MykolaKovalchuk/psion5arm: Psion Series 5 upgrade with ARM-based SBC

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesSid Miller

Vivitar 252 Flash Braket

The Vivitar 252 is a great compact flash which is popular with film photographers. It has an integrated PC sync cable which makes it easy to use with a variety of cameras. The biggest flaw I have found is that the hot shoe mount is…

Pobrania
20
Polubienia
2
Ocena
0
P
Printablesdbalcazar

Front Braket for Prusa Revo Roto kit 4 holes

The front braket is now compatible with the cable holder from Prusa I3 MK3s Hemera Upgrade Prusa I3 MK3s Hemera Upgrade by pilniczek | Download free STL model | Printables.com . Making the wires easier to organize and cover. Compatible…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesGabriel Soria

Sermoon D1 HGX lite mounting brakets

Print in any high temp filament you like, i used ASA (260c and no cooling) for the initial design prints and it's been perfect 4x M3 Heat Inserts, two for the extruder mount holes and two for the old extruder motor mount holes. Insert…

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesAndreas

Bearing support Braket for X-Motor-Mount

X-Motormount_Bearing_support_Braket for Prusa MK3/s X-Axis R4+ with full tensioner by Devilscave with this Part its posible to tension the X-Belt more , without bending the X-Motor Shaft and get less Ringing on Y . this Part fit only on…

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesMichał

Simple power strips brakets

Simple brakets to mount different types of power strips on walls and furniture. Uses tie wraps to acomodate different types of power strips. There is a flat version - quite concealed behind the power strips, and a angled version to mount…

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesGiampanos

Original Prusa MK2-MK2S-MK2.5-MK2.5S Light Brakets and spool holders

those are combo lights brackets and spool holders that i made

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesZerubota
Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesWillelmo

CoPrint CX-1 Extruder braket for Ender 3 V3 Plus with LED bar

These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesKowa

Snapmaker 2.0 dust cover braket

In Ermangelung von Ersatzteilen für den Snapmaker 2.0 habe ich selbst einen Staubschutzhalter konstruiert und ausgedruckt. Der Halter ist nach dem sich die Schraube gelockert hatte zerbrochen. Der Halter führt das Stahlband für den…

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesMEDELLIN 3D
Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesWillelmo

CoPrint CX-1 Extruder braket for Ender 3 V3 Plus with LED bar - Quick swap version

This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesSweetRide

Modified brakets

Original design is great, but wouldn't work with my lightbar Top bracket is updated design Bottom bracket is original

Pobrania
13
Polubienia
1
Ocena
0
P
Printablesdellbro real

gpu braket plate

i wanteed to expirement with multi color printing

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesWillelmo

CoPrint CX-1 Extruder braket for Ender 3 V3

Thanks to Joker from the CoPrint Discord server for providing the measurements to create this version of the braket for the Ender 3 V3. It wasn't easy, but even remotely, we managed to create this perfect STL for your Ender 3 V3. Material…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesSivuluisu

Snow brush/scraper wall mountingbraket

Mountingbraket for Kungs snow brushes: Kungs Mega-is Kungs Tele-is Kungs Star-is Ice scraper: Kungs Mid-is More info: https://kungs.fi/en/products/winter-accessories/snow-brushes/

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesoasissh

honda accord CG9 6th gen carplay braket

printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesBefernafardofo

50W/100W PSU braket

I needed a bracket to attach a PSU under my desk to power some led strips, so I made these models: Bracket for a 100W PSU, it supports units with these dimensions: 199*98*42 mm Bracket for a 50W PSU, it supports units with these…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesMr.B

Holding Braket for POSSO Storage System

This is a replica of the bracket for the POSSO Storage System. With this bracket, multiple boxes can be attached, preventing them from moving against each other. Dies ist eine Replik einer Klammer für das POSSO Aufbewahrungssystem. Damit…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesEng.Mohammad

Ikea melltrop table braket

Model can be printed with PLA or any other materials to reinforce your ikea melltorp table with extra table cover using these brackets to hold them in position. Note long brackets required to pause the print so you can insert M3 nuts then…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesTinkerBot

Tinkerbot Mini x axis braket

Mini V Gantry Plate Connector to 2020 bar profile for X axis

Pobrania
9
Polubienia
0
Ocena
0
P
Printableststoegi

Replacement part for a broken bike basket braket

This is a replacement part for a broken bike basket base braket/holder.

Pobrania
9
Polubienia
4
Ocena
0

filliment spool braket

fillament spool braket

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesJacquesHumule

BMW 5 Series E39 CD Changer braket

Replacement part for BMW 5 Series E39

Pobrania
8
Polubienia
4
Ocena
0
P
Printablesprintbär

Liebherr Bottle Retainer Braket

When swinging the fridge door open in a rush taller bottles might loose balance and fall out - don't ask why I know. This braket prevents this. To access a bottle you swing the braket up an pull it out. The connector is a snug fit on my…

Pobrania
7
Polubienia
4
Ocena
0
P
Printablesthat guy makes

under shelf lighting brakets

lights I used: https://a.co/d/g8HvWbW watch this video:

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesDOS 3D Printing
Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesErikM.

2 Ladder braket / 2 Stufige Leiter Tritt Haltewinkel

a solid braket for an 2 step ladder in two versions of distance from the wall Ein solider Haltewinkel eines 2 Stufen Tritts / Leiter. In zwei unterschiedlichen Ausführungen von der Wand.

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesKesasus

Letter box stacking brakets

These type letter boxes had no means to be stacked. Made this to make it possible.

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesAndrei

Simple magnetic corner brakets

I made these to store about 50 recipe cards seen in the photo on my fridge for easy access. Will print with no supports in about 30 minutes on a P1S. You can slot up to 3 1x10mm magnets in them, no glue required. Printed mine just fine in…

Pobrania
4
Polubienia
0
Ocena
0

Braketter Kattenetting Kolstadhaugen Borettslag

Braketter brukt til opphenging av kattenett i kolstadhaugen borettslag. Klemmes/klipses på uten teip, lim eller modifikasjon av rekkverk eller sidepaneler. De øvre brakettene vil ikke fungere i øverste etasje. For stor balkong har jeg…

Pobrania
4
Polubienia
0
Ocena
0
P
Printableslogisk

Festebrakett til Nor-Tec røykvarsler

This is a replacement mounting bracket for a Nor-Tec smoke detector. The original ears/tabs on the bracket broke off, so I designed a stronger version that can be 3D printed and used as a direct replacement. The model is designed to fit…

Pobrania
3
Polubienia
0
Ocena
0
P
Printableseloekset

Braketter for montering av Gardena kabelbeskytter til fot

Custom brackets for a custom four legs stand for Gardena cable protection box. The stand is make out of wooden poles, and it's probably hardly usable unless you also make the same kind of stand.

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesSGB

Alfa Spider P2 916 Charging Braket

I have created a charging bracket for the Phase 2 Alfa Romeo 916 Spider. The bracket can be mounted in the boot behind the trim. It can be used with the trim removed, or if you don't mind cutting the trim, you can reuse the same handle as…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesAli Doğan K.

Fiat ducato koltuk yan/alt bakaliti sabitleme braketi

Fiat ducato için Ön koltuk alt bakalit kapakların menteşe brakletidir. Aynı üründen var ancak baskı alırken hata veriyordu. Sıfırdan tekrar tasarladım. İhtiyacı olanlar için, yedek parçacılarda bulunmayan iyi bir ürün. Çifti avrupada 30…

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Braketter for montering av Gardena kabelbeskytter til fot

Custom brackets for a custom four legs stand for Gardena cable protection box. The stand is make out of wooden poles, and it's probably hardly usable unless you also make the same kind of stand.

P
Printables

Solar Mount Braket For RAK19003 & RAK19007 + Battery Tray

Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…

P
Printables

CoPrint CX-1 Extruder braket for Ender 3 V3 Plus with LED bar

These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…

P
Printables

50W/100W PSU braket

I needed a bracket to attach a PSU under my desk to power some led strips, so I made these models: Bracket for a 100W PSU, it supports units with these dimensions: 199*98*42 mm Bracket for a 50W PSU, it supports units with these…

P
Printables

CoPrint CX-1 Extruder braket for Ender 3 V3 Plus with LED bar - Quick swap version

This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…

P
Printables

honda accord CG9 6th gen carplay braket

printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).

P
Printables

USFF dual 2.5" drive braket

a bracket to hold a pair of 2.5 inch drives in a USFF dell computer. fits up to 15mm thick drives. It's a tight fit between the CPU fan and the drives 90 degree sata power and data connectors might be useful. or putting the drives…