1598 modeli
Looking for a fun holiday print this season? Be like the muffin man and bake up a tray of articulating gingered cookies! They're super easy to print! Print the base in brown and swap out filament on the last couple of layers to show the…
A wee Gingerbread House to sit on your desk or shelf, or loop a thread through the included holes in the roof to hang from a tree, or elsewhere! Designed to be printed with a pause-at-height colour swap! Though I'm sure you could just…
ButtPals are your best friends to keep bread fresh. Functional and fun, so be ready for them to spark conversation. I printed them in less than 35 minutes with these parameters: Material: PLA / PETG Layer height: 0,28 mm Nozzle diameter:…
I love the original ButtPals design by dgoalva but I like to twist my bread clip to put it on and off and the original design was to thick to give me that freedom. So I printed them at 2 mm height and noticed a weak point breaking the…
It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Gingerbread Man from Shrek, with flex joints. Hip joint locks into place so he will remain seated and not flop over. Can be printed normal and as an ornament version with a small loop to hang the little man in the christmas tree. Inspired…
Hi all! This is my first from scratch design in Fusion but really happy with the outcome, I've been using it for a couple months and it checks all the boxes of what I was looking for. My wants for this project Put the Uno at a 45 degree…
Gingerbread man 2 cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings:…
A delightful, miniature Gingerbread House decoration, printed in white PLA. This piece is designed to evoke a warm, festive feeling, reminiscent of classic Christmas holiday sweets and winter nights. The kids love it.
Merry Christmas and Happy Holidays! _____________________________________________________________________________________________________________________________ Version 2 is available now!…
Gingerbread Star Wars TIE Fighter Kit Card can also be used as a Christmas Tree ornament. Solid wings or one with a “bite” are available to suit your preference. Also contains a version with a ring for hanging and without the ring. The…
This is a remix of Arduino Case by 3DP . I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance…
A gingerbread man cookie cutter for the holiday season Print instructions PLA 10% infill .15 mm resolution
Merry Christmas everybody! Apologies for taking so long to bring this one out, it has been a slightly busier month than usual. Riding on a similar theme to my popular Gingerbread House kit I bring you Santa Claus' sleigh, which of course…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Assembly instructions My Gingerbread House Holiday Card Kit was designed in Fusion 360. Check out the video above to see how to assemble it and I'll be posting a few design tutorials on how I designed it. Here's the link to the video:…
Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Easter Cookie Biscuit Gingerbread Cutter (approx 50-60 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Christmass cookie cutter of gingerbread. 5cm/6cm version
Gingerbread man cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings: Line…
UPDATED (12-20-2023): Version 2 has slightly shorter “frosting”, an edge on the lightsaber to allow for easier MMU/AMS painting, softer edges and other minor tweaks. Flexi Gingerbread Darth Vader. Model is designed with different heights…
Only a cookie cutter Gingerbread Man Print Settings Printer: Own Build: ndl V2 Rafts: No Supports: No Resolution: 0.2 Infill: 60-80% Filament: Generic ABS Notes: Dont print it in PLA! Category: Kitchen & Dining
a gingerbread man printed with sunlu filament Coffee for the body and White for the rest .2 layers change to white on layer 26 5.2mm and have a look at my gingerbread woman https://www.printables.com/model/1084245-gingerbread-woman
Let's make Gingerbread village with your 3D printer! 4 kits are included. Level1 : Tree Level2 : Sleigh Level3 : House1 Level4 : House2 If the parts are tight, please use "loose_size" file.
Remix of bread cutting guide at https://www.thingiverse.com/thing:2794539 with 2mm notches/grooves added to prevent knife teeth from scraping plastic bits that would contaminate the bread. This is a bread slicer that can be disassembled…
I loved the original small gingerbread house, so I rebuilt it a bit different. Fits an LED Candle at 100% size.
This large and small articulated gingerbread men are print in place and have moving arms, legs, and a neck. Not a large bend, but still nice. The only recommendation I have printing-wise is make sure the joints are strong, so if you can…
Spread holiday cheers with the new Gingerbread Mug, a sugary and festive way to hold your soda cans! (we saved a few gummy bears from our Prusa Mini to decorate it with 🐻 ) Comes in an unthreaded and threaded version - screw on the lid if…
Shrek and the Gingerbread Man
FYI (2025-11-25): New and "improved" version here : https://www.printables.com/model/1498404-bread-lame Rectangular bread lame, using standard double edge razor blade and no extra hardware parts. This design allows the blade to be safely…
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
Meet the Cyber-Gingerbread Buddy, the ultimate holiday mascot for the 3D printing enthusiast! This isn't your grandma's cookie cutter—this 3D printable ornament features the cheerful silhouette of a traditional gingerbread man overlaid…
Perníková chaloupka
Just a simple bread clip shaped like a cat. Insert bread bag (into butt) and good to go. :)
Tool to cut and bend wires for use in a breadboard. To use the the tool: Count how many holes are between the two nodes you wish to connect (including the nodes themselves) Find the equivalent number on the tool. Cut the wire to that…
Cookie cutter of an all known character from the movie Shrek. For the most common cookie size scale it down in the slicer. Scale factors: X 50%, Y 50%, Z 100%
Gingerbread man, inspired by a cookie cutter I just got from China. The first image is from the shop
Inspired by ButtPals, here my personal Family Guy - Peter Griffin version. Start with white color, then after 3mm insert a pause and change to black EDIT: added color stls Hope you enjoy it! HOW PRINT IN MULTICOLOR WITHOUT MMU: Printer…
New flexi gingerbread Chewbacca with or without a “bite”. Ornament versions also available to spice up your holiday tree. Eyes, nose and bandolier pouches are now at a different height so they can be another color if desired. Scaled to…
8cm cookie cutter and Stamp of Gingerbread house, Can be printed together to save on space on your print bed or seperated.
I've printed these with 0.20 mm layer height and a 0.4 mm nozzle. Breadboards are attached to the holder by sliding them in. Remove any adhesive pads from them first. The breadboard should stay in place fairly tightly, but if not you can…
8cm cookie cutter and Stamp of Gingerbread Man / Person, Can be printed together to save on space on your print bed or seperated.
This is a simple tray for securely mounting a full sized breadboard and Arduino Uno. It includes screw holes for M3 or 4-40 machine screws to securely mount the Aurduino. The breadboard can be secured using the adhesive pad which is…
Simple bread lame, if you want one without a handle for standard DE razor blades. Printed with PETG, 0.2mm.
DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY
Breadboard for esp32 Since I have the ESP32 and try to build circuits I have problems because I only have one free space left to connect to the standard breadboard. So I decided to make a version so that it's in the first column and free…
These are digital files only. The following STL files are included: (1) Gingerbread House #1 (GBH #1) (2) Gingerbread House #2 (GBH #2) (3) Gingerbread House #3 (GBH #3) 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20%…
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32. You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs. Simply connect the two modules…
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
original by OogiMe https://www.thingiverse.com/oogime/
This is a set of dough scrapers and cutters. They are 1.5mm, 2mm and 3mm thick, giving you more flexible or stiffer dough tools. I use the 1.5mm thick one the most because it bends to conform to different mixing bowls that i use. I…
Just a bunch of gingerbread people. Color change at height once for frosting and again for pupils (for bitten and sinister). As pictured, the gingerbread lady was color swapped twice, first to white, then to pink. Color swap as you see…
Christmas Door Trim Corner - Gingerbread🍪 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 15 x 15 holes. Both designs are the same except one has clip holders if you use something with…
I LOVE this idea and the original model posted by PenolopyBulnick. I wanted a few extra features for my gingerbread children: -Jangly, loose, flexible joints with more range of motion (in the style of the flexi rex) -Rounded over edges to…
Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…
Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
The larger holds a Raspberry Pi 2/3/4 and a half-width breadboard. The smaller is made for a Raspberry Pi Zero. Nothing too complicated - just handy prototyping cases in solid and slotted bottoms. Both accept 4x M2.5x4 (or M2.5x5)…
Notes: Add a color change at specific height for different colored frosting in your slicer. Joints have 0.2mm tolerances and print well on Prusa Mini+. If your joints are fused, adjust printer settings to compensate - or break those…
Lame (/lɑːm, læm/) is a double-sided blade that is used to slash the tops of bread loaves in artisan baking. A lame is used to score (also called slashing or docking) bread just before the bread is placed in the oven. To assemble you will…
For the Gingerbread Mug comes a matching Dice Box to store your dice, USB sticks or other goodies in! This is a freebie from our Winter Collection: https://arsmoriendi3d.com/shop/category/winter-collection-2021/ Happy Holidays! Interested…
Another portable station for the Arduino Uno. I wanted a holder that put my Uno in a specific orientation and secured it with screws so it wasn't flying off every time I pulled out a lead. I used the negative space to place a big tray and…
Hi, here is first piece from my Krampus themed Christmas decoration take your Christmas tree to the next level :) pull a ribbon through the hole in the head and hang it print size is 12x8x1,6 cm tested with Prusa SL1 at 25um everything…
gingerbread man
This is a bread lame that accepts standard DE razor blades. The blade clip locks into place to securely hold the blade during use and there is a knurled thumb ramp on the clip to help you manipulate the it while keeping your fingers away…
gingerbread man cookie cutter and stamp infil 50%
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ The Gingerbread Skeleton is a holiday ornament for anyone who already miss Halloween or like us just can't get…
Tiny Gingerbread house cookie cutter including a stamp Printing instructions: use brim for better adhesion of small parts after printing use a superglue to glue in the handles on back side of stamps Baking instructions: roll the dough 2-3…
Remix of Perplixis' case on thingiverse. Updated the breadboard section to fit regardless of which side the tabs are on widened the arduino side and added mounting hole supports which will accept M3 heat-set inserts.
Small house cookie cutter for when you want a gingerbread house without building a whole gingerbread house. The cutter is 7.5cm x 6.5 cm / 3" x 2.5" and makes a 4 bite cookie, but can be scaled in the slicer if desired. Also great for…
Consider food safety: https://blog.prusa3d.com/how-to-make-food-grade-3d-printed-models_40666/ The ones in the photos are made with Franz Buttermilk bread. Recommend compressing the sandwich by hand before using the press.
This is a print in place model of a moving gingerbread man. No glue required, only some string ! 🍭🍪 You can also try a more difficult little Elf or maybe the Nut Cracker . This Gingerbread man is the easiest one to print :) You can do a…
This is a series of bases for Arduino UNO and similar expansion boards. I wanted a solid base to keep my boards along with a typical 830-pin breadboard for my projects. I was initially inspired by Dimiwit-Dave's designs but since those…
This 1x1 Gridfinity Holder will hold up to 3 Breadboards. Just print at least 2 Holders and space them to fit your Breadboards length. The regular sized Breadboards like BB830T from BusBoard Prototype Systems (or a cheaper clone) will fit…
A cute simple bread slice fidget clicker that uses a keyboard switch. Perfect for stress relief! Insert a keyboard switch and place the bread slice ontop to click away! ❤ Love This Design? [📸 Share Your Makes] Print one out? Upload a…
No Supports Print with 0.6mm nozzle for fastest quality prints.
Simple bread proofing basket. Can't buy them anywhere because everyone is an artisan baker now, so I designed this. About the right size for 750g of dough. Designed in Onshape, model is here:…
Small project box with both M2 and M3 mounting holes for your ElectroCookie ½ Sized breadboard. Includes 2 x 11mm holes on the end to fit barrel plugs or grommets. Has a little extra space against the wall with the holes to accommodate…
A weaved basket with some bread in it. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
Cookie Cutter! 2 models! 1 - Tree 2 - Ginger Bread Men Print: 2 perimeters at least!
Cute Christmas themed earrings. Can be printed on any printer - no multicolor needed! Just print the 3mf elements separately in the following order: brown base white ornaments green bow tie blue/red buttons Layer height should be 0.15mm.…
Hi! This is a little bread box model which functions exactly like the real deal. You can print a nozzle tray to store nozzles in it or design your own thing. I am sure some kid will also love it as a bread box for the dolls. Important!…
This is a pattern cutting tool for cutting patterns into traditional icelandic leaf bread/snowflake bread . Leaf bread is a very thin deep fried bread or cakes prepared as part of christmas preparation in Iceland. They are decorated with…
Meet the Flexi Print-in-Place Gingerbread Man , a holiday decoration that combines traditional charm with a playful vibe thanks to its articulation. Whether as a festive ornament, a keychain or a unique gift, this adorable gingerbread man…
What: Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone. Two different orientations depending on preference/need. Notes: For some reason the bottom…
This is a bread lame used to score bread before baking it. I made it as a gift my uncle who is a baker. I can’t guarantee that it will work, but at least it looks nice. It should fit most double edged razor blades. There are two pyramids…
Do you ever need to place an arduino nano on a breadboard? place this case on it to protect it while you still have access to GPIO Designed on Fusion360 Print in PETG or PLA - easy slot together
Gingerbread Christmas house! It's foldable, so it can be multicolor by a pause print! I printed it at 0.2 with a 15% infill and 3 perimeters. The house clicks into the base, and the roof lays on top. You might need to glue the roof down…
This Christmas ornament cutter is perfect for gingerbread or cookies. Print instructions Rafts: No Supports: No Resolution: 0,3 Infill: 25% Notes: Printet from ABS
cutter and marker christmas gingerbread man fondant cookies
Print in PetG with transparent filament for great light bulb covers that will withstand the heat this holiday season! Kit A: Merry Christmas Kit B: Happy Holidays
C-haloupka Create a Magical Gingerbread House for Christmas! 🎄🏠 Bring the holiday spirit to life with our gingerbread house cookie cutter set ! This easy-to-use set lets you cut and assemble all the pieces you need to create a charming…
Happy Holidays! To usher in the Christmas and holiday spirit, I present the Gingerbread House Kit Card! It features an easy to assemble model, with simple but great colors that print surprisingly well with the AMS or AMS Lite. Created by…
Gingerbread man for giant lego wreath. Print face down, no supports required. Buttons x3, just glue them in.
Gingerbread man Cookie Cutters in different sizes: 60mm, 80mm, 120mm and 160mm
Making the wreath a little more festive fun - a smiling gingerbread man
This tool helps bending wires for use on breadboard. Simple as that. Print instructions Category: Electronics Summary This tool helps bending wires for use on breadboard. Simple as that. Print Settings Printer Brand: Prusa Printer: I3…
