Chevrolet Camaro 1977 (Print-in-Place)
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
- Pobrania
- 491
- Polubienia
- 88
- Ocena
- 0
317 modeli
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
Español Percha para cama ikea stuva English Hanger for ikea stuva bed
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Con esta plantilla podrás interpretar el estado de la nivelación de la cama en tu impresora Ender 3v3 SE. Ten en cuenta que si el Offset z da malos resultados en la nivelación en tu maquina, tienes que buscar las razones por las cuales…
Summary This is a model of a Chevrolet Camaro RS/SS (1967) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned,…
KameraHalterung Kobra 3
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Found over at the 3D Warehouse good luck Dino93
1969 Camaro Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
Soporte para la Camara Anycubic kobra 3
can be printed together or separately in other colours can be printed without support the Camaro is very realistic Print in place kit card , Assembly required
Bring the power of American muscle to your shelf! This high-quality 3D model of the Chevrolet Camaro 1990 is a detailed STL file perfect for collectors, automotive fans, or scale model enthusiasts. Designed with clean geometry, this model…
Sencilla espátula con diseño agradable a la mano y funcional, en mi caso use filamento ABS para resistir mejor la temperatura pero se puede usar otros filamentos tranquilamente.
modelo echo para que la foto entre a presión capa .20 vel. 100mm/seg PLA
Hot bed spatula that does not scratch the surface. Espátula para cama caliente que no ralla la superficie.
1968 Camaro kitcard Its quite easy to assemble.. The front and rear wheels are different size. The rear is supposed to be the larger. Both wheels snapfit to their place easily. The camaro.stl has everything in a single file. I recommend…
This is a sweet 1970 Camaro for your Hot Wheels collection. It's an even simpler process to finish this car than my other Hot Wheels models are. My other vehicles have a chassis' that are printed separately and then glued onto the bodies.…
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
My original Moccamaster scoop broke so I designed a printable version. It requires support for the handle.
Camaro SS Gear Shift Knob German Soldier. Made in Blender for 2010-2015 Manual Camaros. May fit more Vehicles. Preferably use resin printer, i will make a new version soon for FDM.
1979 Chevrolet Camaro & 1979 Pontiac Firebird — two icons from the same era. Two closely related American muscle cars, reduced to small, clean objects that keep their distinctive shapes and character. The Mini Cars DUO series brings…
I wanted to organise all our office coffee equipment and accessories, but I couldn't find any good existing solution. So I made my own using gridfinity system! I will be adding new models as I finish printing them so I know they are ready…
Chevrolet Camaro - wall art, easy to print
1969 Camaro, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Print, take a photo, public on Instagram ad tag my page nani3d 3D PRINTING SETTINGS I have print it with 0.25mm nozzle, 0.10 layer haight, ironing activated, you have to put 3 pause to change filament.
Snap on attachment to have a working hinge on the coffee pot of a technivorm / moccamaster coffee machine. Attach to the existing handle when you break off the not-working hinge parts. Printed with PLA to test the workings, but printing…
Español: Modelo STL para verificar nivelación de cama de impresión de varios tamaños. Inglés: Multiple size STL model to check print bed leveling.
Fits virtually any 52mm (2 1/16") gauge that uses the traditional ‘U' bracket for retention. Gauges with threaded bodies (like Equuis) are not guaranteed to fit or be tightenable. Has a 14x15mm passthrough on the bottom side to allow…
Destapacaños for Dummy 13 Camara man
llavero camara de fotos original pon una foto , publicidad , cualquier imagen es valida. altura de capa 2.0 boquilla4.0 sin soportes y con dos paradas una en la capa 33 para poner el tope y la otra de cambio de color ala altura 55 .…
Just a badge for a z28 Camaro. MultiColor/MultiPart (3mf) and Single Color/Single Part (stl)
Chevrolet Camaro SS Wall Art Silhouette model. Adjustable size I accept model suggestions.
This is my best recreation of a Chevrolet Camaro. I suggest printing upright with normal supports. -also, could also be used as a finger skateboard :) Have fun printing!
This is a professionally modeled 3D printable version of the Chevrolet Camaro 2016 . The model is designed with clean geometry, smooth curves, and accurate body proportions to capture the aggressive and iconic look of the 2016 Camaro. All…
STL file with English descriptions. Untested atm.
Usalo para calibrar la cama de tu Ender 2 yo me canse de buscar.
Designed to have a higher inner space since the original lid would lie on the outlet arm and would therefore bend by bei
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Please follow me and down load all my things. I would really appreciate it if you did. Thank you.
The model has two main added features - this lid has ventilation holes on the sides and top which avoids condensation build up and has a hinged lid , as to not remove the whole lid each time water is being added. The hinge is modeled to…
The model can be printed in 4 parts and bolted together using the groves in the back of the parts. there are parts for doing so. The long rails have inserts for nuts. If you have larger printer, you can print it in two parts probably. the…
Just a simple filter holder to suit your moccamaster. .stp file included Print Settings Printer: Tevo Tarrantula Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: Kitchen & Dining
A remix from Thingiverse, scaled, cut and fixed for 1/10 scale
Might need support to print properly
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
Un adaptador para la camara Nebula para la impresora Kobra 3
Dummy 13 Titan Camara Man Upgrade Shield
This wheel center cap was designed for the factory wheels of a 2014 Chevy Camaro. The part was designed in two pieces so that you can easily sand, paint, clear the cap if desired and print the Chevy bowtie in a different color. Easy print
Moccamaster Switch Snap-Fit Replacement This is a replacement switch cap for the Moccamaster coffee maker. It’s modeled to match the original part and tested for a snug snap-fit —once installed, it stays securely in place and functions…
Chevrolet Camaro SS 2016 wide body key chain, .8 layer height, fenders have been extended to give it a widebody look.
Llavero en forma de rollo de camar, que almacena en su interior una tira de fotografias.
Diseñe esta visera para ampliar la protección que ofrecen las mascaras de paintball/airsoft de tipo Dye i4 o su clon FMA F1, ya que suelen dejar la frente descubierta. Son modelos muy básicos ya que no tengo conocimientos de diseño y los…
I thought my Moccamaster coffee maker missed a little something on the front so i made this little grill to spice it up a little. It has a friction fit and slides right in.
1967 & 2024 Chevrolet Camaro, two generations brought together as a Tiny Cars Duo — from the original first-generation Camaro to its modern counterpart. Part of the Mini Cars DUO collection, both models are simplified for reliable…
Mount is tested on ender 5 s1 and works great. I didn't even have to use the screws to mount it to the camara.
Pontiac Fiero, firebird, and camaro window switch replacement.
Questo camaleonte carino e coccolino :D Consiglio di stamparlo con un filamento Color Change per avere un effetto strabiliante!
I printed in ABS with 25% infill density and 6 layers of wall to ensure good resistance to the perpendicular force applied when we opening the box bed.
The Modern Muscle, Cast in Aggression. This is not a car. This is the reincarnation of American defiance, cast in sculpted steel. The Chevrolet Camaro SS immortalizes the visceral, unapologetic roar of a modern-day warrior. Every chiseled…
this is a race car I made. it does require you to glue the wheels on.
I decided to make grilles for my 1984 Camaro restoration because reproductions were expensive and a guy on ebay selling 3D printed ones was more expensive than reproductions. To be frank, I did this out of spite lol. I spent a good bit of…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Also fits the Douwe Egberts coffeemaker
This filter holder enables the use of a pour over set up with the moccamaster drip coffee machine. The holder centres the filter underneath the hot water dripper and is usable with different types of pour over holder. Ive used it…
Voilà de quoi s'imprimer un beau souvenir de Camargue, ou pour décorer une pièce, un gateau… Bref il manquait cela à printables ;)
Chevrolet Camaro SS 2016 widebody, fenders have been extended to give it a widebody look.
Chevrolet Camaro Z28 - John Lennon
This is a filter holder for Moccamaster coffee machine. My friend requested one. No screws are needed. Print tested with PLA, gyroid 10% infill (i tested it that way). Print it the way it is laid in STL, no suports are needed (brim might…
First replacement shift knob for my 2014 Chevy Camaro. Will work for years 2014-2015; I believe will also work as far back as 2010, but Haven't tried it. Have a look at the print settings and material.
Soporte para guardar la tapa de la cámara de fotos en la correa
zapata de flash o micro, etc para cámara. Print instructions Unassociated tags: flash adapter Category: Camera Summary zapata de flash o micro, etc para cámara. Print Settings Printer: ANYCUBIC I3 MEGA Rafts: Doesn't Matter Supports:…
Imprimir las dos primeras capas, pausar la impresión, colocar la tela y continuar.
This is a shower screen for the Technivorm Moccamaster Cup-One 1-cup coffee maker. It distributes the hot water for even wetting of the coffee in the filter. Simply place it on the top of the filter holder before brewing (it takes a…
1985 Camaro, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale Print tip: use a 0.2 mm nozzle for better detail.…
10 minute job for my moccamaster. Still fits on today ( 3 months ) but not really good fit. Print instructions Infill 100% Support No Material PLA
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Replacement hatch guides for the 85-90 Camaro and Firebird car lines. Should be printed using ABS due to internal car temperatures. Due to tight tolerances and differences in stepper motor calibration you might need to print one set then…
Summary Remix of wtrow"s Simplisafe Simplicam camera corner wall mount https://www.thingiverse.com/thing:5192178 Original Corner wall mount stl was giving me first layer issues so I fixed it. Also made a square version, a 10 degree right…
es un test para comprobar como esta la primera capa y nivelar la cama
Who doesn't love a low poly classic muscle car?
Adaptador de 3/8" a 1/4" Sirve para tripodes, camaras, niveles y mas Medidas: 26.5mm alto x 22mm diametro. Recomendacion de Impresion: Impresora en uso: Artillery X2 Filamento: Pteg o Abs recomendable( se puede usar PLA) Paredes…
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
Adapter is made to fit the Modular Mounting System which you can find on Thingiverse . https://www.thingiverse.com/thing:2194278 To bind the two pieces together you can use glue or (as I did) use a solderingiron to melt the pieces together.
Shifter plate for Camaro
A blank, matte-white model of Camazotz—the bat god of the underworld from ancient Maya mythology—ready for your creative expression. With sharp, minimal features, winged limbs, and a stylized, fearsome silhouette, this DIY collectible…
4th Gen Camaro Hood emblems. Decepticons and Pirate
Our ten year old Technivorm Moccamaster Clubline coffee maker is still working great but the drip-stop tab tends to drop down by itself causing overflow in the filter. This is a plug that will keep it in the open position. If you want to…
Cajón para guardar las camas de impresión de la Creality K1 y K1C y situarlo en la parte inferior de la impresora evitando vibraciones innecesarias de otros soportes que se adhieren a la impresora. El cajón superior tiene hueco para poder…
Calibrador de la cama Kingroon, se puede usar en cualquiera de los dos lados según comodidad del usuario una vez posicionada la cama en una esquina para calibrar, desplazamos mejor manualmente la cama a las siguientes esquinas debido a la…
Printing data : PETG 0.4 nozzle 0.2 layers 3 walls 25% cubic infill. Enjoy your print and coffee :-)
Camar/Forest 801 cabinet hanger covers modified to be longer and with wider skirt. I printed mine with PLA, standing on the skirt using tree support. Step file attached so everyone can tailor for own needs.