Wyniki wyszukiwania: cel

Parcel Opener – Safe, Durable & Blade-Free

Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…

Fast-Print Mobile/Cell Phone Stand (Vase Mode)

This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…

Travel Buddy - cell phone stand & shopping cart hijacker multitool - printed in place

This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…

Plant Cell Plant pot and Planter - Vase mode design

~ Design collaboration with Azurefilm ~ A biological plant pot design for all the nature science lovers out there! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…

Samsung Galaxy Watch 4 & Cell Phone Charging Station.

Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.

Friendship Bracelet Maker Braiding Loom

These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…

Robotic Cell Plant pot and Planter - Vase mode design

An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…

Belt Clip Accessory for Thermacell MR300/450

Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…

Plain bracelet

Just a simple bracelet I made for my wife. Nothing special. I printed it with a sparkly purple PLA as that's her favorite color and it gave it some pop. That's the one in the picture but note that I doubled the height in the slicer before…

Celtic Vase 2 - Spiral Vase

This is the Second Celtic vase out of a series of 3. The vase can be printed in any material, and with original scale it is recommended to have at least a 1:4 ratio between the layer height and the nozzle size. Please be creative with…

Paracord Bracelet Shackle

Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.

2025 Coin Cell Battery LED Light

I needed a reusable way to attach a coin-cell battery to a single 3v LED as well as something I could hand to just about anyone without any explanation and they could figure things out just by looking at it. Just enough of the battery…

Mini Animal Cell Combined Into One Model

Love the Mini Animal Cell by MosaicManufacturing. Here is a version with all the parts combined into one model, to print with a single color 3d printer. Category: Biology

Toyota Celica Supra MK2 Wall-mounted

Please click if you appreciate my work :) Retro soul in a modern shell. This 3D printable wall-mounted sculpture captures the sharp, unmistakable lines of the Toyota Celica Supra MK2 – a true JDM classic from the golden era of the '80s.…

Samsung Galaxy Watch 6 & Cell Phone Charging Station.

Bedside charging station for your phone, Samsung Galaxy Watch 6.

Print in Place Worry Bead Bracelet

This print in place design embeds spherical rotating beads in a customizable cuff bracelet. The model comes from Tinkercad Code Blocks https://www.tinkercad.com/codeblocks/fjyDH4QxsuJ and the size can be easily modified by changing the…

Barrier-Free Friendship Bracelet Maker with Braille (Kumihimo disk)

In the files you'll find a 16-thread and a 8-thread version of it. 80 mm in diameter 2,5 mm thick With haptic directional arrows, letters and braille. You can print it directly without supports. In the files you'll find also find the…

Ford Transit Cell Phone Holder

I designed this to fit the odd shaped hole between the speedometer and the air vent on a 2018 Ford Transit van. It should fit some other year models as well. The holder simply sits into the odd shaped hole making it secure. It will fit…

Messi Barcelona Penalty Kick

Messi Barcelona Penalty Kick

Chainmail Bracelet, Full Persian Chainmail Braid

A set of various sizes as well as the parametric model file. Sizes make a pleasing thick braid ~10" (25cm), 7.5" (19cm) and 5" (13cm) long. Print the test print beforehand to see if your settings are correct :). any issues please message.

Hinged Heart Print-in-Place Link Bracelet

These models print in place without supports and should flex easily straight off the print bed. A little wiggling may be required to loosen the joints. I printed mine at 0.1 mm layer height and 50% infill. You might be able to get away…

Stackable battery beer crate for C and D cells

I have create another beer crate battery holder from scratch. There are 2 bigger crates: 8x C cell 6x D cell

HSW 10x10 cells wall compatible with 210x250 mm print size printers

UPDATE 04.08.2023: Added print file for PLA, 0.3 mm layer. UPDATE 31.07.2023: Added print file for PETG, 0.3 mm layer. Print time decreased to about 5 hours. UPDATE 25.07.2023: New model printed and seems all is fine, check photos. On…

Maze 54x44 square cells, center start

I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…

Soporte Celular Homero Simpson

Soporte Celular diseñado sobre la imagen de Homero Simpson.

Battery Box for 4 cell 280 AH Lifepo4 Cells

Simple battery box 4 280ah lifepo4 cells. Bottom and sides but no top YET. Hope it eliminates the need for banding cells. Cells are 174mm by 72mm by 207mm tall. Printed on CR6 Max with pla+.

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Heltec V3 Case with 18650 cell and TP4056 charge controller

My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…

Webbing/Strap Clip Accessory for Thermacell MR300/450

While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…

Ford Puma Parcel Shelf Clip (UK Models)

A replacement clip for the Ford Puma parcel shelf in the UK

PAINT BRUSH - pincel 10 mm

este pincel lo diseñe para imprimir en una emergencia en plena pandemia y me dio muy buenos resultados este pincel esta hecho para imprimir con nozzle 0,4 preferentemente en pet-g ,siempre con ventilador encendido durante la impresión de…

Anycubic Kobra 2 Neo ADXL345 accelerometer mount

I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…

Soporte celular Virgen María

Porta celular inspirado en la silueta de la Virgen María. Se imprime en 2 capas de los colores Blanco, Azul claro. Puede personalizarse imprimiendo un nombre y pegándolo en la parte frontal. Por su diseño puede soportar una Tablet.

Soporte Celular Mafalda

Porta celular inspirado en la imagen de MAFALDA personaje de humor creado por ‎el argentino Joaquín Salvador Lavado. Se imprime en 6 capas de los colores Blanco, Rosado, Rojo, Blanco, Negro y Blanco. Puede personalizarse imprimiendo un…

Celtic Tablet Weaving

Tablet weaving (youtube.com) TABLET WEAVING (weaversguildnorthshore.org) Jak tkát na karetkách? (youtube.com)

Apollo Justice Bracelet - Apollo Justice: Ace Attorney - FDM

“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…

FC Barcelona Jerseys Keyring - Nike eras 2004 - 2025

🟦🟥🟦🟥🟦🟥🟦🟥🟦 ⚽ Visca Barça! 🏟 🟨🟥🟨🟥🟨🟥🟨🟥🟨 Nike is the current partner of FC Barcelona for kits and apparel, creating some of the most iconic jerseys for decades now! Here are some of the most memorable ones since 2004, when a golden age of FC…

Bracelets making support - Supporto per braccialetti

ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…

Willow Leaf Bracelet

Intro It all started with an innocent enough question from my friend, “Can you make 3D printed jewelry?”, and I said “What do you have in mind?”. Three months later I attended a wedding where all the bridesmaids were wearing my Willow…

Cancelation Plant pot and Planter - Vase mode design

A simple modeli showing wave cancelation. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…

Button cells in disguise

When storing your button cells in these containers you can treat them as if they were a C, AA or AAA battery. This means you don't need battery storage solutions which contain a separate section for storing button cells nor the need for…

Cat ears for Bose 700 Noise Cancelling (700NC) headphones

Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…

Renault Modus trunk parcel shelf clip replacement

This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…

Beads bracelet plate/ pomůcka na výrobu náramků

This plate can you helps with preparation on beads bracelet Pomůcka na výrobu korálkových náramků

Celtic Knot Coaster - Triquetra

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a touch of timeless elegance with the Celtic Knot Coaster! With a diameter of 100 mm and a thickness of 4 mm, this intricately designed coaster…

Primary mirror cell for Hadley w/ slide-in hardware (M4 & #10 supported)

Print settings 0.6mm nozzle 0.32mm layer height 20% infill (but it probably doesn't matter too much) A test model is included so you can test that your hardware fits and that your printer settings are working, but this worked fine on my…

LED Ring Celling Lamp

16 Parts to print, diameter 140cm, where is space for the controller in my case paired with Arduino and LED Strips.

3d Map Sagrada Familia (Barcelona) Spain

3d map of the Sagrada Familia and its environs In a 3d map with the reliefs of the city and the surroundings of the monument (it is a similar representation by copyright).

Simple Battery Holder for CR2032 Coin Cells

Simple battery holder for storage of twenty (20) CR2032 coin cell batteries, commonly used as PC BIOS/RTC batteries, Apple AirTags, remote controls, and other electronics. Also can hold thinner CR2016 batteries in a pinch, which is why I…

GlowBit 8x8 LED Matrix Cellular Diffuser

I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au

Solar Filter - Celestron 8SE

This project has been on my list for a while and this contest motivated me to get it done. This is a solar filter for a Celestron NexStar 8SE for viewing and taking pictures of the sun. The glass can be picked up through Amazon for $10 at…

Plant Cell Model For Desperate Biology Students

I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…

Boston Celtics Logo Xmas Ornaments (Clover Logo + Single Color Lucky Leprechaun)

Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).

Celtic Weaving – Set of Cards for Belts and Bracelets

This set of cards for Celtic weaving is designed for creating decorative belts, straps, bands, or bracelets. The cards can be used with finer materials such as wool, cotton, or yarn, as well as thicker cords and strings. The result is…

soporte para pinceles

soporte pinceles para usar un vaso con agua como recipiente. velocidad impresión 45 mm/s altura capa 0.15 mm

Cellphone holder

Ideally to be printed in ABS to resist heat and wear, you can also add some self adhesive small bumpers to the bottom so that it doesn't slide.

AA Battery holder for 16 cells

This is a simple 16-cell AA battery holder, created with TinkerCAD (search for “AA-Battery-Holder-16-Upright”). I needed something to organize my rechargeable NiMH batteries while topping them off in the recharger 8 cells at a time. It's…

Lightning necklace/bracelet

Lightning model to use as a necklace or bracelet. Quick and easy to print.

Celtic Trinity Knot Button

This is a small Celtic knot with a 2mm hole on the back for sewing it onto a knitted hat. Printing I printed it face down, single color, no support, with PLA. The layer height should be a small as your printer can handle for the fine…

Cable Management for Celestron C8 SCT

A small cable management attachment to tie cables to. This utilizes the screws where the fork normally connects to. The ribs are printed separately, and fit snuggly into the square pegs. I do recommend a small dab of super glue to prevent…

Valentine Bracelet Heart Neclace

Valentine around and a nice Print for your Loveones can also be used for other Festivity

Bracelet holder

Jewelry Stand with T-Bars – Elegant and Practical Storage 3D Printable Model Keep your jewelry organized in style with this minimalist and functional jewelry stand. The design combines aesthetics and practicality in a compact layout. It…

Celestron Nexstar 6SE Finder scope rail

This part seems to be easy to break especially if you carry it around without a protective hard case. I did it based on original measures but simplified compared to the original. So there is no weight reductive cutoffs etc. Made in…

Cell Phone Holder in the CD Player slot

Holds cell phone while charging, securely in CD slot. Tested in Ford cars and Trucks. Print in PETG or ABS - as the summer sun will melt PLA. Default settings but turn on thick bridges. Pictures show .3 layer height draft mode print. Note…

Celtic festival of Samhain

Celtic festival of Samhain Wall Mount Art. Samhain: A Glimpse into the Celtic Precursor of Halloween The Celtic festival of Samhain, pronounced "sow-in," stands as a significant and ancient observance that marked the end of the harvest…

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Heart Bracelet

This Heart Bracelet makes the perfect home-made gift for your special Valentine! Choose from one of the 9 provided lengths and print the bracelet in two colors through a simple filament color change during printing. The clasp attaches and…

10x 13400 tray for making battery from cells

little bit of hot glue is nessesary for good hold in tray , ideal for making a battery from cells , its made for my mini 10w solar system in garage if printed please add a make thanks

1° LAYER CALIBRATION-Circuit de Barcelona-Catalunya F1 GRAND PRIX

Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun

Celestron C8 Dust Cap with Dew Ring Wire Space

I needed a new lens dust cap for my 2000s Celestron 8. I added a ring dew heater and the cap no longer fit. This was not surprising due to the ring being designed for a different version of the C8. I added a small inlay in the cap for…

Celtic Tablet Weaving - thin card

Print in place 16340 battery case (4 cells)

Print with no support

Skådis / Skadis C Cells (26500) Battery Dispenser

This is a simple Skadis holder for C cells (26500) inspired by popular AA / AAA dispenser type. The “holding bar” may not be necessary, but it helps with stability and better cell distribution. Small bed support are needed for the hooks.…

Cell for ERF filter / Cellule pour filtre ERF

Some ERF (Energy Rejection Filter) pre-filters intended for observing the sun in H-Alpha are sold without a mounting cell. Combined with an appropriate alpha hydrogen filter, it is therefore possible to observe solar flares. This cell,…

Fermilab Wilson Building model (USA Particle Accelerator)

A model made as a gift for a researcher. Printed using PLA, the translucent atrium was Atomic Filament Translucent Smoke Black https://amzn.to/4aeFIej Use an CA glue with an accelerator for best results when gluing PLA! These are the…

Suunto 9 bracelet pinlock

The small plastic piece holding the floppy part of my Suunto watch broke. In order to keep it from moving around, I designed this small bit that you insert in a hole of your watch strap and it keeps things attached together.

CR2032 and LR44 Button Cell Battery Box (4x6mm Magnet)

Didn't have any 4x1.5mm magnets on hand (and didn't want to buy more magnets every time there's a design to print, so I modified it to fit the magnet sizes that I had (4.6mm cylindrical magnet).

Celtic tablet weaving

60x60x1,5mm print it with pla by two colors - you do not need MMU for this model, you just change filament between layers make sure that printing plate is clean beginner friendly

Celtic Knot Coin

Coin with a celtic knot engraved in it. Uses art from PublicDomainVectors.org .

The Censer of Celestial Auspice

The Censer of Celestial Auspice Origins in the Ming Dynasty (1368–1644) The "Censer of Celestial Auspice" (天祥爐, Tiānxiáng Lú ), is believed to be a rare example of a bronze ritual censer commissioned during the opulent mid- Ming Dynasty .…

Velký organizér do kanceláře - Great organizer for the office

Kresleno v PTC

18650 Cell Grid x9

Designed to connect in series to make 48v x 10Ah battery module. REVISION 1: r1 - Revised with extended connection routing to side holes 18650 cells used - LG MJI 3.7V x 3500mA 9 cells in 3S 3P configuration (11.1Vx10500mA). 4 modules…

FC Barcelona-keychain

Barcelona keychain for your keys

PRUSA Accelerometer Gridfinity box

A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…

Soporte Celular - Cara Feliz - Happy.

Tomando como referencia el emoji de Cara Feliz lo dibujé y luego le di volumen. Una vez impresos, se adiciona con pegamento el mensaje “Happy” al portacelular. Se imprime en 4 capas para cambio de cada uno de los colores; no requiere…

Replacement body supports for Harley Benton HBCE 990 Electric Cello

The provided knee supports for the HBCE 990 cello don't make it feel like a real cello. I was unable to keep a good posture while making this cello rest on my knees, maybe due to my legs which are smaller than average. This replacement,…

Soporte Celular Vilma Picapiedra

Portacelular inspirado en la imagen de Vilma Picapiedra (Wilma Flintstone). Se imprime en 5 capas de los colores : Rosado, Blanco, Rojo, Negro y Naranja. Por su diseño puede soportar una Tablet. Vea también a Pedro Picapiedra.

Viking Bracelet

Dimensions

Kancelářské sponky (Paper clips)

Kancelářské sponky hranatého tvaru. Square shaped paper clips.

Chancellor Coin (Secret Hitler Board Game)

Enhance your Secret Hitler board game with this 37mm Chancellor coin. It's a nice tactile addition that replaces the usual wooden plaque or the printed paper placard, adding a bit of DIY style to the game. The design is inspired by a…

HomeBrew WiFi/BT/GPS for Celestron AUX (OLD)

EDIT: there is a newer and improved box version here: https://www.prusaprinters.org/prints/113538-box-for-the-homebrew-pcb-wifibluetoothgps-accessor Enclosure for the SMD PCB created by ni2o…

Cellphone + bottle holder wheelchair

A friend of mine sits in a wheelchair. She had a mount to hold her waterbottle but couldn't find anything on the market that was holding both her waterbottle and cellphone. That's why I've printed it. This is already version 6 due to…

Jelly 2 Horizontal Cellphone Holder

Designed to be mount-taped onto my car dash so I can drop my Jelly 2 cellphone in and go. If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…

Heart Bracelet

Bracelet for Valentines day, Prints in place and snaps together. This is a redesign similar to a model available in my store, but I completely remade it which is why I have designated it as a new model and not a remix.

Celestron NexStar 4SE Tripod 1,25" Eyepiece Adapter

This is a adapter fitting the tripod 2" eyepiece holes of a Celestron NexStar 4SE. With this it is possible to use the two 2" holes also for 1,25" eyepieces. I highly recommend to print this with PETG as it is more flexible and durable.…

Prusa CORE One Heatbed Cable Entry Cover with Input Shaper Accelerometer Cable Support

This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…

Sujeta pinceles/cepillos de dientes/palillos chinos estilo japones Japan style

Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.

Box, cell for RC car, cart 1:10,1:12 (130x130)

Hello, I have for you a Booth, a cell for an RC car, a cart 1:10, 1:12 (130x130x130mm ). It is detachable and you can choose which parts to put where, or which ones to print. Suitable for a cart for an RC car. Or as a booth 1:12, 1:10. I…

Garmin Fenix 3 HR bracelet/strap ring

This model cans save you a watch bracelet !!! (And costs nothing…) I printed it without supports (there is a good side to do this) out of PLA, and it lasted 9 months (I removed it because I wanted a PETG one, but the PLA one was really…

Celebration Drink Coasters

You can apply cork to the underside of the coaster to help keep it from slipping on the table.