Wyniki wyszukiwania: cem

CORE One (L) Nozzle Replacement Tool

Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…

MK4S Nozzle Replacement Tool

Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…

MK4 Nozzle Replacement Tool

With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Elegoo Neptune 3 and 4 replacement filament spool holder

A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…

Automotive Clip Replacement

Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…

Replacement Foot for Lasko Box Fan

This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…

CORE One Nozzle Replacement Tool for E3D Nozzles (e.g. ObXidian HF)

tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…

Replacement Nintendo switch grip

Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…

Glasses Broken Frame Replacement

Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…

Replacement Furniture Cam Lock

I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…

MK3S Replacement Parts

I didn't see any replacement parts for the MK3S on here so I decided to upload them for easy access. I didn't like having to go to the Main Prusa page to get these files individually so I put them all into their respective folders for…

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Black Diamond Storm 400 LED Headlamp Latch Replacement (now includes lever too)

My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…

Toothpick Replacement for Small Swiss Army Knife

Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…

Diaper Genie Complete Replacement Lid - For Older Models

One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

Holder for CORE One Nozzle Replacement Tool and Nozzle Wrench (Skadis/Magnets)

A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…

Broom thread replacement ø23mm handle - filettatura standard per manico scopa

Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…

Sony WH-H910N, MDR1000X, WH-1000XM2 Replacement

Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.

PS2 Replacement Bracket for Noctua 60mm Fan SCPH-50004

Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…

Air Vent Outlet Blade Replacement Part for Toyota Corolla

Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…

Replacement Battery Cap for Ryobi 4V Lithium Tools

My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…

sun visor replacement clip VW, Audi, Skoda, Seat

The clip on my Skoda Fabia has broken for the second time. I drive on a route where the sun often hits from the side/front. The cover, metal clip, and screws are reused from the original. The model requires a support structure and should…

Prusa MK4 PSU Replacement

Replacementpart for PSU from Prusa MK4. If you want to place your PSU not on the foreseen place you can use these replacementpart. For example if you want to place your PSU outside of an enclosure. Recommend to Print in temperature…

Monkey Skull Chalice AI Mesh Generation + Blender Displacement How to Video

Monkey Skull Chalice. HOW TO VID.

War of the Ring Army Token Repacement

War of the Ring Army Token Repacement. Orginal tokens are boring and easy to overlook.

Ergonomic SpaceMouse Wrist Rest w/ Flexible 'Exoskeleton' (V2)

Original wrist rest design for the 3DConnexion SpaceMouse®. The ‘scales’ are printed as seperate parts and friction fitted to the main skeleton part. I also included a g-code version for the skeleton and scales on one plate. I included…

zipper head replacement

Two zippers where broken from my loved backpack. So it was not usable anymore. After plenty of testing i managed to get a working design. I the design only make sense on large zippers… The zipper pull is from here:…

Fleischmann Kupplung (coupling) replacement H0

Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…

IKEA toy train (Lillabo / Brio) replacement crossing barriers

A replacement for IKEA Brio / Lillabo train toy crossing gate. As the gates / barriers easily break off, this print can be used as a replacement. It was modeled from the original, with a few minor modifications to simplify printing.…

Comical and Edgy Bad Parking Job Award/Handout - Business Card/Wallet Size For Easy Placement (zip tie holes for fun)

Playstation 2 front disc tray plate replacement

Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…

Walmart Hart 20V Stick Vacuum Replacement Wheel

Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…

Mastermind replacement scoring peg

These little pegs are always getting lost or sucked up into the vacuum cleaner! I made a replacement peg as close as possible to the existing design. Just choose your color (white & black are standard) and print as many as you need.…

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Replacement hinges for charging flap (Renault Twizy)

[EN] It is a common problem for the Twizy that the hinges break, because the material is not very thick. If the charging flap is not closed properly the vehicle will not move. Normally you have to replace the whole flap that might break…

Replacement Safety Gate Plugs (Munchkin Pressure Fit Gates)

Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.

Door Slider SPACEMAKER A67 X6 replacement

Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…

3Dconnexion SpaceMouse USB Dongle Holder Remix

Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…

Godzilla Displacement Example

A side-by-side comparison of the low poly version of a model that you can download from Models-Resource and the resulting model after Displacement Magic in Blender and some basic sculpting. Video Coming Soon. Very similar to. FYI you can…

Mannlicher-Łucznik 7x64 Replacement Magazine Body

IKEA PRESSA CLOTHESPIN REMPLACEMENT

To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…

TipToi Replacement Tip for Gen 4 perfect fit

Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.

Makita Makpac Hinge Pin Replacement

Printed in ABS with 100% infill

Replacement Clip for Black Diamond Cosmo-R 350 Headlamp

This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…

Koss KPH30i replacement headband

The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…

SodaStream replacement button

The injection molded plastic push button on the top of my SodaStream broke in half. I made this simple replacement (V2) as a temporary fix until I could buy a replacement button. I printed it with Translucent Blue PETG so it would be…

Mitutoyo Micrometer Replacement Battery Cover

This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…

Breville Tamper Replacement (54mm portafilter)

Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…

Mammotion Luba AWD 1000/3000/5000 Replacement Turf Tires

My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…

Tineco A10/A11 Hero Latch Replacement (Accessory attachment)

This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…

Clipper Comb / Guard Replacement 3mm (Wahl)

Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…

Replacement Ikea Shower Curtain Ring

A replacement Ikea HASSJÖN compatible shower curtain ring to help complete your set in case you lose or damage one of your own. In the images with 2 rings mine is the one on the left and the one on the right is the Ikea ring. I printed on…

IKEA Tisken Replacement Suction Cup

3D file of the original IKEA Tisken support to replace the original suction cup with custom hooks, wallmount etc. Example here: https://www.printables.com/model/319150-ikea-tisken-hook Support is needed. See gcode.

Wildone 4L replacement cap for drybox

My first creation and upload, hopefully someone finds it useful. I found these Wildone cereal storage containers sets (4L version) on Amazon and I wanted to see if they would work as dry boxes. I did not want to drill through them so I…

BakFlip Mx4 Corner Replacement

This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts

Replacement propeller for Schleich Animal rescue helicopter (42476)

Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)

Game Spinner (Die Replacement)

While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…

Calvin&Hobbes replacement for my rotten Ford emblem

Different colors are all in different z-levels. For my Prusa printer I just set M600 command after 4 layers. Started with grey, then white, blue, again grey, and black. Also I printed it in two parts because in the back there are some…

Replacement Holder for SKÅDIS "Container with Lid"

This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…

Tinkertoy Construction Set - Replacement Parts

These models are replacement parts for the Tinkertoy Construction Set . I've designed them using an existing set as a reference. I may be missing a few parts that weren't in my set. Parts included: Rods in 5 sizes. The filename has a…

Skullcandy Crusher Evo headphone replacement arms

This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…

PARKSIDE 150mm Clamp Jaw Replacement

PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…

Reinforcement part for Jabra EVOLVE 40 Corded Headset

My Jabra EVOLVE 40 headset breaks on the right "arm", so I created this reinforcement part. It can be used both to reinforce an intact headset or to repair (making it usable) a broken one. To have more stability between the printed part…

Tamiya Square Bottle Stand (extra thin cement or panel liner)

This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅

Nano garden aka "Prêt à pousser" replacement pod / capsule

The plastic pods tend to break ; and if you are buying seeds instead of the plant capsules you might need this ! My daughter has 2 modulo nano gardens - that's 8 pods total ! This is not an exact replica of the original pods but it's the…

Yakima JetStream Roof Rack End Cap Replacements

Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…

Customizable zip pull replacement

Customizable backpack replacement part, can be personalized with your name using Fusion, easy to print. Note: Make sure the selection filter is set to ‘All’ 20% infill or more PLA or ABS.

Replacement Lawn Light Stake

This stake has a 18mm diameter cylinder to allow outdoor lighting to fit over the top. There is a slot in the cylinder where a low power wire can pass through. This model was printed using supports from build plate only. The notch should…

3Dconnexion SpaceMouse USB Holder

I've only had my 3Dconnexion Wireless SpaceMouse for a few days and I'm already super worried about losing the USB adaptor. This little handy gadget is a 3Dconnexion SpaceMouse USB Holder. It fits perfectly around the SpaceMouse and the…

Replacement cones for juicer

I had to replace broken cones for juicer that I can't find anymore on the market (too old). As I didn't wanted to throw them in the trash, I design them using Fusion360 from original model getting inspiration from this video → Printed in…

Playmobil replacement prison sink tap and toilet seat

Print these with a fine layer height. I've printed them in ecoPLA by 3DJake using a .4 mm nozzle. I've added the Fusion 360 models so they can be customized.

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Lawn Mower Robot Replacement Wheel

The rubber part got brittle, so I decided to make a whole new wheel, even a bit more grip added with the spikes… no supports .3 mm layer hight 4 top and 4 bottom layers 3 perimeters PETG pretty easy print

IKEA Lillabo Turntable Enhancement

Streamlined Lillabo Turntable for Wood Playsets Explore a fresh take on the Lillabo turntable enhancement, tailored for the IKEA Lillabo series. While reminiscent of previous designs, this rendition prioritizes simplicity and efficiency.…

Universal Eyeglass Temple Arms – Replacement Side Frames for Optical Use

Durable side frames (temples) for mounting above the ears 03.12.25 - Model Uptaded and Replaced. No Supports needed anymore. Holes diameter 1.5mm Distance from Glass Frame 2.5mm

Lillabo (IKEA version of BRIO) level crossing barrier replacement

It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…

Bankers Lamp Shade Replacement

Replacement shade for ‘Bankers Lamp’ type of lamp. Original glass shade broke during transport and original replacement ones are bit expensive ($20-50), so why not to make better one :-) Fits and works perfectly, printed in PLA which is…

Grimm's Blocks and Puzzles (Spiel und Holz) Stepped Pyramid Wooden Building Block Replacements

These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…

Ticket to Ride Score Marker Replacement

A simple replacement for the wooden score marker for the boardgame Ticket to Ride. As shown on the photo in black.

Textured RSL Screw Hole Door Plug Replacements (18 ct.)

These plugs are designed to fill the screw holes of an RSL brand glass entry door. Many glass doors have screw holes for securing the inner and outer trim/frame around the glass pane. Here's the website for the door frame:…

Snapline (Hobbycreek) replacement element

This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands. Once, I broke one element by twisting the arm too much so maybe you did it too or will ;p Version Description Date A.1 Initial…

Snap on replacement hitch BRUDER - Fendt Favorit 926 Vario 01169 - Anhängerkupplung Ersatz

Because it broke and would break again, I designed this hitch raplacement eliminating further frustration. Trailer part in PLA surprisingly rigid even with the openings. more beefy grips firmly easy to use for the kids much freedom when…

Reef mini expansion replacement

Replacement for Reef boardgame mini expansion, in case you lose one fish. https://boardgamegeek.com/boardgame/253274/reef-kings-coral Print instructions Category: Toy & Game Accessories Summary Replacement for Reef boardgame mini…

Magic Bullet (Blender) Replacement Gear

The model has been designed to be printed on the gear teeth (i.e. upside down) without any supports. The circle in the middle only exists to make the overhangs possible without supports and can be removed if you wish. While the friction…

Xiaomi 1S Rear Reflector Replacement

Reflectors are a safety feature. Consider replacing them with a genuine part. Use this model at your own risk. Dimensions match the original part mostly. The clip is the weakest point in this print therefore it's made as a separate piece.…

Pressure key (25,6x29,6 mm) replacement part for RITTO door bell

Pressure key is printed with ASA and need partial supports. After printing, the part was grinded and smoothed with aceton by spraying.

Female Buckle Replacement for 15mm Strap

This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…

Baratza Encore Coffee Grinder Knob Replacement

Print settings: 0.20mm layer PETG 100% infill (may be overkill, but it was a small part and wanted it to be strong) No need for supports. Fits like a glove. Step file included if for some reason a newer model is a different size (bought…

Replacement closure for a SAVIC pet carrier

Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…

Reinforcement Glass Stand / Verstärkter Brillenständer

I include the Fusion source, so that one can adjust it to personal needs.

Makita Vacuum Head Reinforcement (2mm version)

I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part). This redesign features a uniform 2mm…

PAW Patrol Rescue wheels replacement projectile

I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…

Policeman cookie cutter

Print instructions Printer: Creality Model: Ender 6 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Any PLA

opel corsa 2006 5d rear door strings replacement.

Design is at the end of video

Ikea LÄTT (Latt) chair seat replacement

I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…

Replacement Axle for Playmobil® Off-Road SUV (6889)

A replacement axle for the Playmobil® Off-Road SUV (6889). Rotate by 90° to print in horizontal orientation, use support! Use sandpaper to grind down if it does not fit 100%. When wheel is sitting in place rotate it a bit until it runs…

Anycubic Photon Mono X spacer replacement

The VAT of this printer has four friction fit plastic spacers. One fell out of my vat and was lost. This project prints a replacement spacer. Included files is for ABS. Should work just as well with any other filament. I had a roll of ABS…