Wyniki wyszukiwania: coleman

Sortowanie

137 modeli

P
PrintablesGenCab

1:10 - Scale Coleman Cooler

1/10th scale model of a Coleman cooler for use as a prop or accessory. Because reasons! This is a remix of OMW2FYB's work whom remixed from Schlauncha and I believe that is a remix of someone else work. I simply prepared this for a single…

Pobrania
1191
Polubienia
240
Ocena
5
P
PrintablesBarry Willick

Coleman Cooler Hinge

This is a print-in-place hinge for Coleman coolers. The “PIN” version is designed to have the same opening stops that the original hinge and the “CONE” version stops at 90 degrees to reduce the stress on the screws holding the hinges on.…

Pobrania
821
Polubienia
78
Ocena
5
P
PrintablesSchmidt

Hinge for Coleman Cooler

I made this for my friends cooler which had busted hinges (very common) before I borrowed it. It works. The version I installed was printed in the orientation designed, with 5 external, 25% infill. Requires support because of the holes, I…

Pobrania
625
Polubienia
374
Ocena
0
P
Printableszeroprints

Coleman Butane Adapter

I bought a Coleman butane bottle but the nozzle didn't fit anything I owned. This nozzle fits a TOPKAY torch lighter, but is also fit a different Lotus butane lighter I had as well.

Pobrania
537
Polubienia
20
Ocena
3,67
P
Printablesmpatl

Coleman Drain Plug Replacement

Complete drain plug assembly for a Coleman Xtreme cooler. The original Coleman design is just a push fit plug but the drain body exposes a bit of thread which could support a threaded plug. This is what I decided to make. This particular…

Pobrania
466
Polubienia
21
Ocena
0

1:8 scale camp stove like coleman

nozzle: 0.4 parts: M2 x 4mm ( visual gas cap) M2 x 8mm M2 x 25mm

Pobrania
376
Polubienia
114
Ocena
4,89
P
PrintablesEnoch

Coleman LED Lantern Knob

If you have this lantern, the knob will break. Pay close attention to orientation of the "double" switch design of the lantern. I believe this is a better design, and an example of what would be a challenge for injection molding.

Pobrania
268
Polubienia
10
Ocena
5
P
Printablesthall72

Lego Compatible (13197.dat) Minifig Head Modified SW Coleman Trebor

This model is compatible with the lego system.

Pobrania
220
Polubienia
47
Ocena
0
P
PrintablesDarbooka

Propane tank heater stand for Coleman 1lb tanks

Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…

Pobrania
210
Polubienia
17
Ocena
5
P
Printablesmuddymaker

Coleman Powerhouse Dual Fuel Lantern Travel Case

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Powerhouse Dual Fuel Lantern Travel Case. Hardware…

Pobrania
207
Polubienia
41
Ocena
5
P
PrintablesDDDavid

Coleman drain hole plug (Screw)

This kit is to replace all the part from the original cooler Coleman drain plug. I made the design to used the original gasket to prevent leak. You can print the gasket in TPU or maybe use a gardenhose gasket. Personnally, I printed it in…

Pobrania
201
Polubienia
24
Ocena
5
P
Printablesrebeltaz

Intex Pool Skimmer Adapter for Coleman Pool

I bought this pool skimmer from Amazon for my pool. This particular model is designed for use with Intex pools that have a through-the-wall, screw type pump port. Coleman pools, unfortunately, do not. This adapter is inserted into the…

Pobrania
198
Polubienia
26
Ocena
5
P
PrintablesDDDavid

Simple Coleman plug for cooler. TPU

To replace my broken plug on my coleman. Printed in TPU

Pobrania
197
Polubienia
26
Ocena
5
P
PrintablesNerdMomma

1lb Coleman Propane Base

Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden

Pobrania
184
Polubienia
20
Ocena
4
P
Printablesmltriebe

Retro Coleman Ice Chest

This is a remix of a file I got from Thingiverse, I sized it up 300% and added the Coleman logo. I used Hatchbox white PLA, Silk Silver, Bambu Lab Metal Green PLA, and Bambu Lab Basic red PLA. The logo was printed with a .2 nozzle to get…

Pobrania
173
Polubienia
88
Ocena
0
P
PrintablesKevin Claypool

Coleman Mach centrifugal blower wheel 1472a1191

This is a blower that I dimensioned as a direct replacement for the Coleman Mach 8 1472a1191 centrifugal blower fan. These fans are prone to drying out, becoming brittle and throwing shrapnel into your A/C unit. Good to have one on hand…

Pobrania
163
Polubienia
56
Ocena
0
P
PrintablesWayne

Coleman/Fleetwod Bed Slide end caps

Bed slide wedge and rail cap for Coleman popup campers. Remixed file to fit a flat head bolt as I feel it would have more strength over the factory tapered one. I also modified it to fit the end rail as well. I've included the flat and…

Pobrania
148
Polubienia
8
Ocena
0
P
PrintablesPrinterPatrick

Benji Coleman Schedule 1

This is Benji Coleman, he is not a cop and will not snitch on you. --Created with Meshy

Pobrania
140
Polubienia
3
Ocena
0
P
Printablesrebeltaz

Larger Hose Holder For Coleman Above Ground Pools

When I saw m99's pool hose holder , I was struck by the genius of that design. Why Intex (and other pool manufacturers) thought it was a good idea to have the pump hoses coming of the sidewall of a vinyl pool with no support whatsoever,…

Pobrania
132
Polubienia
18
Ocena
0
P
Printablesmuddymaker

Coleman Dual Fuel 533 Stove Travel Case

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coleman Dual Fuel 533 Stove Travel Case. Hardware required;…

Pobrania
131
Polubienia
26
Ocena
0
P
PrintablesScubaSteve

Coleman drain to Intex Pump fitting

Adapted so it would connect to the drain fitting on a Coleman (year 2020) pool so it could be connected to the backwash line. How used: Disconnect Intex discharge (backwash) line Connect adapter to pool Connect discharge (backwash) line…

Pobrania
120
Polubienia
16
Ocena
0
P
Printablesmlerley

Towel hook for Coleman/Bestway above ground pool

This is a simple towel hook that hangs off the top steel rail of a Coleman Power Steel pool. I designed it for my 22' pool but I imagine it would fit other sizes as well assuming the top steel rail is the same shape and size. Printed in…

Pobrania
118
Polubienia
18
Ocena
5
P
PrintablesHulsten

Coleman Cooler Hinge

Are you guys in for a treat… My team has been in the lab cooking up some of the most cutting edge innovation, sadly we cannot show you those until next quarter (pending). However, what we can show you today is another quality of life…

Pobrania
113
Polubienia
30
Ocena
4
P
PrintablesRichards Makes

Tarp Awning hook for Coleman popup

We bought a used pop-up camper that didn't come with an awning. After watching this video We made some adjustable PVC legs and printed these hooks to make a cheap tarp awning. Printed with Orange Hatchbox PETG Sliced with Prusa Slicer…

Pobrania
112
Polubienia
17
Ocena
0
P
PrintablesAndrew

Coleman Cooler Plug with Strap

Print in a flexible filament like TPU. https://cad.onshape.com/documents/c4b0301bb931b140648883c3/w/3a9e5ce6a0f532bb646d12ec/e/061bd83916be84db296c48cb?renderMode=0&uiState=68232b27aa2cdf3d6ef3f73e

Pobrania
108
Polubienia
3
Ocena
0
P
PrintablesSuspect

Coleman Xtreme5 Cooler Handle

Lent the cooler out and it came back with a broken handle. This model re-uses the “nubs” that hold on the original handle. It functions the same as the original - can be rotated around etc. Printed in PETG. I have lifted the cooler up…

Pobrania
108
Polubienia
9
Ocena
5
P
PrintablesRed Haniwa

Coleman pump adapter

Simple adapter for my battery operated Coleman pump. There are 3 test models: top test: The top is small and require adequate cooling. try printing this to see if your fan speed % is good enough. 24.8 and 25.2 base test: Print these out…

Pobrania
107
Polubienia
9
Ocena
0
P
PrintablesMupshot

6inch wheel collection coleman cooler

Lost the wheel and axle assembly on a fishing trip. this not only made it cumbersome to move the cooler, the wheels act to stabilize the unit. Its a decent cooler and I couldnt toss it in the dumpster just because I lost the wheels.…

Pobrania
105
Polubienia
6
Ocena
0
P
Printablesjrsone

Coleman Camp Stove Leveling Feet

These prints fit over the stamped feet ‘humps’ on the bottom sheet metal of the Coleman Triton 2-burner stove, so that it can be leveled when placed on a campsite picnic table. As you may know, campsite picnic tables are never level to…

Pobrania
95
Polubienia
25
Ocena
0
P
Printablesperson001

Coleman triton series 5461 control knob

A control knob for Coleman Triton series 5461 camping stove. I printed it with a 20% infill and used some epoxy to help hold it on. It has a gap but it functions.

Pobrania
86
Polubienia
4
Ocena
4
P
PrintablesCraig Robinson

LCD Screen Shade for Kandi and Coleman Golf Carts

Introducing the LCD Screen Shade for Kandi and Coleman Golf Carts 3D Model: Elevate your golf cart experience with our meticulously designed LCD Screen Shade, tailored specifically for Kandi and Coleman models. This innovative 3D model…

Pobrania
84
Polubienia
5
Ocena
0
P
PrintablesStele

Coleman Event Shelter Foot

We lost a foot of our Coleman event shelter, so I remodeled one. It's almost a one to one replica, apart from thicker walls for additional strength.

Pobrania
79
Polubienia
11
Ocena
0
P
Printablesmstejska

Coleman Event Shelter Centre Bracket

gcode 10 hours is without brim gcode 12 hours is with brim

Pobrania
76
Polubienia
11
Ocena
0

Mini Coleman Chiller Koozie without the Lid - Coke and Diet Coke Theme

This is my version of the Mini Coleman Can Koozies, this one is done without a lid, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a…

Pobrania
73
Polubienia
13
Ocena
5
P
PrintablesMaksym

Parametric nozzle for high-volume inflators (Ryobi, Bauer, Coleman, Makita etc)

This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesSoloTSi97

Coleman Cooler Lid Prop

I got tired of our scout troop's coolers getting put away wet/damp and getting moldy. So, I designed a prop to hold the lid open partway to allow air to move through and prevent this. The prop was designed to fit onto the front lip of the…

Pobrania
70
Polubienia
7
Ocena
5
P
Printables3D-ARC@Riaan

Large Coleman Cooler Box Hinges

Fusion 360 file provided, if you need to make changes. I printed this with SBS material on my Creality K1. If you find your bending section cracks, then thin it more. currently it is 1,5mm thick where it bends.

Pobrania
69
Polubienia
9
Ocena
5
P
PrintablesIllusionistPM

Coleman Propane Stove 5400A700 Replacement Knob

This print replaces the plastic intensity knobs on the old Coleman two burner propane camping stove. Unscrew the screw from the metal stalk, remove it and the thin circular metal "Off" plate if you still have it. Put the plate into the…

Pobrania
68
Polubienia
5
Ocena
5
P
PrintablesNahuel

Coleman LowBoy Camping Fridge Lock Replacement

A neighbor left in the curb this camping fridge because the lock was broken... Looks like he doesn't have a 3d printer! I designed and printed this Coleman LowBow lock replacement to bring this almost new fridge back to life. Here you can…

Pobrania
66
Polubienia
12
Ocena
0

Mini Coleman Chiller Koozie - Dr Pepper and Diet Dr Pepper Theme

This is my version of the Mini Coleman Can Koozies, done in the Dr Pepper and Diet Dr Pepper Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in…

Pobrania
66
Polubienia
12
Ocena
0
P
Printablesgubutek

Coleman tent clip replacement

This is the replacement for my Coleman tent clip. I used cable tie to hook it into the tent strap. The instruction is here https://gubutek.wordpress.com/2022/06/25/fix-coleman-broken-tent-clip/ I hope you can fix your tent for the next…

Pobrania
65
Polubienia
19
Ocena
0
P
PrintablesRaphhorn
Pobrania
64
Polubienia
8
Ocena
0
P
PrintablesBrad W

Coleman Knob Large

Replacement knob for a coleman stove. This version is made to match the size of original coleman knob.

Pobrania
64
Polubienia
1
Ocena
0
P
PrintablesFunkybuild

Coleman Cooler Two-Way Handle

Here is a replacement handle for all of us who have lost or broken one for our Coleman coolers. It should fit any Coleman cooler that uses their two-way handle (flips and hinges on two pegs). No additional parts needed if you still have…

Pobrania
63
Polubienia
7
Ocena
0
P
PrintablesFreddy-six

Coleman Xtreme 100QT Cooler Lid Prop

I can't found the right one for my Coleman Xtreme 100QT cooler so I create my own. Just a simple part, to keep the lid open, when you don't use the cooler. Printed with Extrudr PLA NX2 hellfire red with a 0,4mm nozzle and 0,2mm layer…

Pobrania
61
Polubienia
5
Ocena
0
P
PrintablesRflewelling

Coleman/Fleetwood Redwood Camper Thermostat Box

I needed a replacement box for my popup camper renovation. This was measured after the dimensions of the original. which is about 149mm x 149mm. This can be a 1:1 replacement for the original box that is damaged. I left it solid and will…

Pobrania
59
Polubienia
16
Ocena
5
P
Printablesrebeltaz

Coleman Above Ground Pool Angled Return Diverter

The return hose on our Coleman 14' x 42" above ground pool shoots the stream straight out into the center of the pool. Any pool this large (or larger) really should have the return flow diverted to the side, away from the inlet so that…

Pobrania
58
Polubienia
5
Ocena
0
P
Printablesjeremy cobert

coleman lantern fount bumper

I got tired of scuffs on the bottom of the fount for my 1971 Coleman 228F lantern so I designed a simple solution. This should fit most older Coleman lanterns, if not just adjust the size of your print +- % and you should be good. Printed…

Pobrania
55
Polubienia
5
Ocena
0
P
PrintablesAki

Lantern(coleman 295)protective ring

A protective ring cover for Coleman Lanterns or Stoves. It is for 295. Tank outer diameter is 154mm. It has a structure that gets caught on the inner processed part and does not come off easily. It should fit a Coleman one of similar…

Pobrania
55
Polubienia
9
Ocena
0
P
Printablesccc888

Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug

Bottom face down, print with support to get the best result.

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesAki

Lantern(coleman 282) protective ring

A protective ring cover for Coleman lanterns. It is for 282. Tank outer diameter is 134.8mm. It has a structure that gets caught on the inner processed part and does not come off easily. It should fit a Coleman one of similar size.

Pobrania
52
Polubienia
9
Ocena
5
P
PrintablesDan Rogers

Coleman 150 quart Cooler latch

Print as saved in .3mf file - prints well at .1mm layer height, supports on build plate only, 5 vertical shells This is a replacement latch handle (the outer part) for a Coleman 150 quart cooler. That's the 5 day model - it is huge. My…

Pobrania
51
Polubienia
3
Ocena
0

Lantern protective ring - coleman 226

A protective ring cover for Coleman lantern model 226. Tank outer diameter is 98.5mm. I printed with TPU 95 - 0.2mm , that gets caught on the inner processed part and does not come off easily. Infill: 20% Temp: 220 C Bed: 60 C Good Luck.…

Pobrania
51
Polubienia
12
Ocena
5
P
PrintablesJoe

Avenli/Bestway/SaluSpa/Coleman Inflatable Hot Tub — Type VI Filter Adapter

The Problem The Avenli Vermont inflatable hot tub ships with a filter cartridge (marked "Type 2") that doesn't quite fit standard sizing, it has a smaller bore and different ring placement. Replacements are harder to source, more…

Pobrania
50
Polubienia
7
Ocena
0
P
Printablesschreiber884

1/10 scale coleman voltmeter cooler

1/10 scale coleman voltmeter cooler. voltmeter slot is 25.5x15.5mm holes are 33.5mm apart. Slot in the back is big enough for a standard JST plug. link to waterproof voltmeter :…

Pobrania
50
Polubienia
21
Ocena
0
P
Printablesshaktimaan

Coleman Cooling Box Spare Part Handle Knob 52 QT | 52QT Extreme

Print with 0.2 or 0.15mm layer height. Orientation lying with Supports should increase strength as printing lines are perpetual to force vector. Use PETG or ABS for extra strength.

Pobrania
49
Polubienia
2
Ocena
0
P
PrintablesRflewelling

Coleman RoadTrip 285 Replacement foot

Original on the left, replacement on the right. One of the feet on my Coleman RoadTrip 285 broke. I wasn't able to source a replacement so I quickly designed and printed a replacement. Printed at 40% cubic infill with Elegoo ASA for…

Pobrania
48
Polubienia
2
Ocena
0
P
PrintablesNick

1 inch Intex or Coleman filter connector plug

I have plumbed my pool with PVC pipe going to and from an upgraded filter and no longer could use the 1 inch lines that came with the pool. Needed a plug for the hose hook up ports. Designed this to be able to slide in with a tight fit,…

Pobrania
48
Polubienia
2
Ocena
5
P
PrintablesDave Bernhardt

Anova Sous Vide Adapters for Coleman Stacker Cooler

I created an adapter set for my Anova Sous Vide Bluetooth/Wifi cooker to use with my Coleman Stacker cooler. This is a three piece kit that has a screw on mechanism for the inside of the cooler, and two variations of the top - an open one…

Pobrania
47
Polubienia
6
Ocena
0
P
PrintablesAdam Jonkers

Coleman shade tent foot

It was designed for the Coleman Event 14 Shelter but should also fit the Coleman Event 12, Party Shade and Oasis

Pobrania
47
Polubienia
3
Ocena
0
P
PrintablesKrishGup

Coleman Water Bottle/Thermos Handle Replacement

Replacement handle for this style of Coleman water bottle/thermos Designed to use either the original metal ‘rivets’ the bottle already uses or a 2.5/3mm screw with a small washer. Amazon.com : Coleman FreeFlow Vacuum-Insulated Stainless…

Pobrania
46
Polubienia
5
Ocena
5

Mini Coleman Chiller Koozie - Harley Davidson Theme

This is my version of the Mini Coleman Can Koozies, done in the Harley-Davidson Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…

Pobrania
46
Polubienia
9
Ocena
0
P
PrintablesAndrewY

Natural Gas/Propane Adaptor for Coleman Powermate Pulse Plus 1750

Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesLee

Coleman Mach Rooftop AC

This air ramp thingy makes the air conditioner considerably quieter and improves airflow. Fits both 15k & 13K BTU units.

Pobrania
44
Polubienia
12
Ocena
0
P
PrintablesInnovations 3d

Propane Cylinder Stand for Coleman – Modern and Stable Design

This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…

Pobrania
42
Polubienia
7
Ocena
0
P
PrintablesAtomicmoped

Coleman lantern and stove leather pump mold

This is the 15th (and final) version after a LOT of tweaks. I got sick of paying way too much for the Coleman leather pump cups for my lanterns and stoves (if I was even able to find them). The neoprene ones are horrible and always fail…

Pobrania
42
Polubienia
10
Ocena
0
P
Printablesjgentry

Coleman 17FQ Camper Kitchen Cubby

I designed this for my 2017 Coleman 17FQ Travel Trailer. There is a nook in front of the kitchen sink that we wanted to use for toothbrushes and other toiletries but were worried about water damage to the wood. I designed this to fit in…

Pobrania
42
Polubienia
14
Ocena
0
P
Printablesmfetting

Coleman Directional louver fin

A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…

Pobrania
40
Polubienia
4
Ocena
0
P
Printablescharlescho

Coleman Triton Propane Stove Adapter Holder

This thing will hold the propane adapter in place in storage mode.

Pobrania
38
Polubienia
8
Ocena
0
P
PrintablesProjectsupra

Cooler hinge icebox coleman cruzin cooler scooter

Super simple hinge I made to replace the broken one on my Cruzin Cooler scooter, same hinge as most Coleman and other coolers also. Print from TPU or other very flexible material.

Pobrania
37
Polubienia
8
Ocena
0
P
PrintablesNoel Swede

Coleman 533 cover

cover for the stove, use some 1/8 bungies to keep it on.

Pobrania
33
Polubienia
3
Ocena
0
P
Printablespennyfarmer

RV fridge lock Coleman 17b / 17R may work for other camp trailers

I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesDan Rogers

Captive furnace door handle and seal - Coleman Furnace

Summary - Replacement for the captive door handle and seal on a Coleman high-efficiency furnace. Story - while opening the door on the top of my furnace, the original captive doorknob popped out and rolled into a hole in the floor. I used…

Pobrania
33
Polubienia
0
Ocena
0
P
PrintablesFingWizard

Coleman 100qt 5 Day cooler Lid Prop

A wedge I made to keep the cooler lid open while filling the cooler. It was made for a Coleman 100qt, 5-day cooler, but it's pretty universal and should fit many different styles, printed with 20% infill, no supports, standard settings. I…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesUnhinged 3D

Coleman Camper door handle

My camper handle broke so I made this up and has held up over a year so far. I suggest printing in ASA but PETG will also work.

Pobrania
31
Polubienia
6
Ocena
0
P
Printablesjgentry

Coleman 17FQ Camper Kitchen Cubby

I designed this for my 2017 Coleman 17FQ Travel Trailer. There is a nook in front of the kitchen sink that we wanted to use for toothbrushes and other toiletries but were worried about water damage to the wood. I designed this to fit in…

Pobrania
31
Polubienia
9
Ocena
0
P
Printablesywabiko

Coleman Cooler Keep-It-Open

A small thing to keep your (cheap) cooler open:) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Filament: Hatchbox PLA Category: Outdoor & Garden

Pobrania
31
Polubienia
8
Ocena
0
P
Printablesjeremy cobert

coleman lantern fount bumper

This is a fount bumper to place on the bottom of a Coleman lantern, printed in TPU. This is a work in progress and there will be many more changes. Dont shrink this to fit a smaller fount, it wont line up properly Wait for a small fount…

Pobrania
30
Polubienia
4
Ocena
5
P
Printablesbykim

Anova Pro Sous Vide to Coleman Party Stacker Collar Adapter

Collar adapter for an Anova Pro Sous Vide stick on a Coleman Party Stacker 48 can. Sized to fit a 2.5" hole cut with a hole saw. Anova Pro is 2.37" dia. The collar makes up for the gap between the two and has a lip to hold the Anova in…

Pobrania
29
Polubienia
5
Ocena
0
P
PrintablesJK

Coleman Outdoor Gas Stove Knob/Dial

I created a 3D model of a replacement knob for a Coleman gas stove. The original knob, when turned, would slide instead of opening the valve, rendering the stove dysfunctional. The opening for attaching it to the spindle is slightly…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesKyle88

Coleman Air Mattress Plug

Replacement Air Mattress Plug

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesBen Hague

Coleman Petrol Stove Pump seal

Remember to check if your filament is Petrol safe

Pobrania
27
Polubienia
6
Ocena
0
P
PrintablesAndy F

Coleman CT200U or CT200 Minibike Front Rack Mount

Adding the front suspension kit from Coleman to a CT200U removes the place to mount your front rack. These arms give tha

Pobrania
27
Polubienia
3
Ocena
0

Carry box for a liquid fuel Coleman camping stove

Storage box meant to carry camping stove in a camper trailer in a more organized fashion. This is using mixed materials: bottom, front and back - plywood sides - 3d print 3d printed pegs to secure sides to plywood.

Pobrania
27
Polubienia
11
Ocena
0
P
PrintablesHumeco

Adjustable Foot for Coleman Eventemp Stove

Replacement foot for Coleman Eventemp to allow leveling of the stove on an uneven or sloping surface

Pobrania
26
Polubienia
2
Ocena
5
P
Printablesherrb

feet coleman peak 550B (multi fuel stove)

Feet for the coleman peak 550B multi fuel stove. Made to fit them to the stove with an m3 bolt.

Pobrania
26
Polubienia
3
Ocena
0

Mini Coleman Chiller Koozie - Milwaukee Theme

This is my version of the Mini Coleman Can Koozies, done in the Milwaukee Theme. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I included…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesCarson0001

Coleman Lantern Box

A simple box for a white gas Coleman lantern. It's basically impossible to find a case that fits these lanterns as they use glass and are thus susceptible to breakage during transport. This model uses piano hinges on the top and a normal…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesAki

COLEMAN 550 STOVE KNOB

Coleman 550 stove knob. Made from heat-resistant materials such as polycarbonate.

Pobrania
24
Polubienia
3
Ocena
5

Mini Coleman Chiller Koozie - Coka Cola Theme

This is my version of the Mini Coleman Can Koozies, done in the Coke and Diet Coke Themes. More to come. I did not do the handle because I have printed some of these with handles and they only seem to be a nuisance and get in the way. I…

Pobrania
23
Polubienia
6
Ocena
0
P
Printablesbykim

Coleman Onesource Battery Cap

Embossed arrow on the side of the model to help align the battery. Print settings: 0.6mm nozzle 0.3m layer height Supports everywhere Organic support 3 perimeters 6/23/2023: Added additional model for multiple batteries. Import the bodies…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesGeoff

Coleman (and similar) portable 2.4m gazebo repair clips

There are a bunch of different brands for very similar light weight aluminium fold-up 2.4m gazebos. They are prone to the thin sections snapping where they cross each other when subjected to high winds. The one we were specifically…

Pobrania
22
Polubienia
2
Ocena
0
P
Printables3dbplug

Coleman/Bestway spa panel cover

Panel too bright to see stars? This will help with that 5 bottom lays

Pobrania
22
Polubienia
7
Ocena
0
P
PrintablesDonny

Coleman 424 Stove - Valve Wheel Knob

we needed a new knob for my local boy scout troop camp stove, i forgot to take a picture of the finished product. i printed it out of ASA

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesSpittyman

Pin holder for tent poles - Coleman McKenzie Cabin 4 (IKEA Ivar Pins or screws)

I printed this pin holder for our Coleman McKenzie Cabin 4 in order to fix the tent poles to their genuine attachement (holes). You might have to change diameters according to your poles or screws you use. For this, I included step- as…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesMessyExtrude

Coleman Shelter Tab Release Tool

Coleman Event Shelters can be tricky to take down because the sprung release tab is often too narrow and hard to push down especially especially if doing it by yourself. This tab release tools saves you time and your hands from the pain…

Pobrania
20
Polubienia
6
Ocena
0

Coleman 1/2 Gallon Compatible Handle

Coleman 1/2 Gallon Compatible Handle Designed for the Coleman 5690 / 5590

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesAndy F

Predator 224 Air Intake Cover - Coleman Minibike

Replace your air intake cover with your own printed model, adding color or intake options as you please! This fits the Predator 224 non-hemi. I don't know if this fits the 212 or other 224 hemi versions, but if you have one or know,…

Pobrania
18
Polubienia
3
Ocena
0
P
Printablesspamy666

Flextail to Coleman Supercomfort Self-Inflating Sleeping Mat

This is printed in TPU to match the soft seal the original bag uses; however, if it works in anything else, please feel free to share in the comments. The sleeping mat I have is the Coleman Supercomfort Self-Inflating Sleeping Mat 12cm…

Pobrania
18
Polubienia
2
Ocena
0
P
Printableslanguer

Coleman QuickPump Adapter

Additional adapter/nozzle for Coleman's QuickPump. Needed a finer (smaller diameter) nozzle (adapter) to fit into some smallish inflatable kiddie pool for a water day at school. Got one designed and printed in about two hours, and in one…

Pobrania
18
Polubienia
0
Ocena
0