378 modeli
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
It actually needs work for top performance.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
These cubes continuously rotate around each other, while staying parallel to the x,y axes. No hardware is required. This project is the result of my study of non circular gears. PDF download:…
MacOS Ventura and iOS 16 introduce Facetime being able to use the iPhone's camera as a webcam. For this, the iPhone needs to be attached to something. I chose the screen, this is for an LG 38" display. The holder fits over the front and…
I got asked if I had a model for the spill guards for a Dacor Gas range. Since I had previously published the file for the Dacor Gas range knob set, I decided to make a model so you can print your own spill guards. Dacor no longer makes…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament. Printing Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging. Assembly…
It seems as if this does not work flawlessly for everyone anymore. At the moment, I do not own a Bambu Lab Printer - therefore this project is no longer continued/updated and has not been updated for quite some time. For safety measures,…
I started out with the world map from toddsplod67 and ripped out just the continents. https://www.thingiverse.com/thing:116228 My son then printed them for his grade geography project. No guarantees on actual geographic content. Island…
Gridfinity 5x4 (standard size 42mm) container/holder/kitchen organizer for 10 ikea 365+ plastic lids. Slot is long enough to fit biggest 365+ rectangular plastic lid so it easily holds other (round and square) lids as well. I don't have…
Can be used to start growing basil and chili and other plants which need a lot of water at the start. When reloading a bottle make sure you are quick - it will be sealed quickly (a solution will be added soon - check out Update 1) Print…
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
If you like my work please support me. :-) Buy me coffee at ko-fi.
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
No mag-safe needed! 100% printed is so much cheaper. Support paint-on already in 3mf. Check ‘enforce supports only’ Try using your iPhone as a webcam. It works amazing! Also great for recording your face while recording your screen. This…
The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…
This holder will fit an iPhone 14 Pro and a MacBook Pro (14", 2021). It will attach the iPhone to the display/lid of the MacBook to use the iPhone's camera instead of the built-in camera by using the feature “Continuity Camera” introduced…
An iPhone continuity camera mount designed to fit the iPhone 12 to 14 while in its protective case. This mount can be easily hung on a MacBook 13", 14", or 16", however, it fits best on Apple Silicone MacBook 14 or 16 inch. The mount has…
Update 2022-04-09: Additional countries now available as an add-on: https://www.thingiverse.com/thing:5341945 This is a topographic puzzle of continental Europe. Scale is 1:5'000'000 and vertical exaggeration is 10x. Small states…
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Long missed Anykey is here! I printed mine with 0.4mm nozzle, but smaller diameter is adviseable. With superdetail 0.08mm layerheight it turned fine anyway, tried PLA and PETG and both worked fine. Works with HP Pavilion Gaming 500 HSA -…
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Perfect bookmark for the books that lie on your nightstand... It makes nice shadows and reminds you every time that it's time to continue reading that amazing book you've been reading for half a year... The two parts should hold firmly,…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Map of the continental states of the USA. Printing: I did not use any support. Printed solid. PLA+ at 215C. Bed 66C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: eSun…
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
A mount to use your iOS 16 (Beta) MagSafe equipped iPhone as a Continuity Camera to replace your Apple Studio Display See https://www.theverge.com/2022/6/7/23158510 for more information. *Important* : This is designed to be used with an…
Have you ever wanted to attach your iPhone 6/6S/7/8/SE2020/SE2022 to a laptop or Macbook? Then this is the right 3D model for you. For Continuity Camera, Camo app and other webcam phone utilities. No MagSafe needed and compatible with…
I had tried the continuity cam holder from llang https://www.printables.com/model/277366-continuity-camera-holder but noticed that its too tight for my iPhone including the Apple silicon case I'm using. So I redesigned the model in…
Continuity Camera is a great new feature for the iPhone, allowing you to use your phone as a webcam with super picture quality. Here's a universal phone mount to use your iPhone and Continuity Camera with any external monitor. The monitor…
Check out everything else I've 3D printed here https://www.samhillier.co/3d-print/ Lots of stuff I've not uploaded on here yet.
This 3D globe model features raised continent outlines to give a tactile, visual sense of Earth's geography. Designed for both educational and decorative use, it's perfect for classrooms, desks, or space-themed projects. The raised relief…
Summary This is a model of a 1965 Lincoln Continental Convertible Limousine in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels…
This is a REMIX of the original for a solid and larger shelf, while still allowing flexibility in combining multiple prints into one large continuous shelf. I also added the ability to add a bracket to any part of the shelf for additional…
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to fork .shapr source file:…
Holder to attach iPhone to LG monitor (27UN880), the iPhone works as Continuity Camera during video calls.
Playmobil discontinued castle battlements based on Playmobil 3666 compatible with original Playmobil parts. Raft can help for castle battlements connector Support is not necessary but i have used it for my samples.
Drawer Slide Inserts for Double Strung Continuous Rigging Lifts This part was designed to provide a double pulley (v-bearing) insert for FTC robot telescoping lifts using aluminum drawer slides. A two-pulley design provides the capability…
Replacement for the original clip that can be lost or broken. Expensive (costs around USD1 per piece) and frequent not in stock. Can be damaged when removing during front brake maintenance. Takes 7 minutes to print one part. Use 100%…
This all in on print of the continental USA is not only a fun puzzle but also aims to teach kids about the geography of the United States
A flat snap fit shelf for skadis rack. Used with SkadisContinuousShelf-Bracket.STL 0.3 layer height pla+ 15% infill
A simple monitor clip/stand to hold you iPhone when using Continuity Camera. This fits my LG 27MD5KL (5K LG) perfectly, and even allows you to still use the monitors builtin camera
Jojo's "To Be Continued" Arrow redesigned as the one available I had issues slicing. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: 3DOn ABS Atlantis Blue Notes: May need a brim…
This model does not work and is currently not in development. I made this some time ago, because i wanted make my own cheap red dot sight. https://www.tinkercad.com/things/jTnmEr25lEZ-airsoft-reflex-sighteotech-512-prot TLDR: bad idea If…
Orignal Model with lots of size options. https://www.printables.com/model/1218292-mini-pocket-slide-box-5cm-7cm-9cm-h15cm I made this for pill holding for a family member with the size in mind to slip in jeans watch pocket and to make it…
This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.
iPhone mount to use Apple's continuity camera feature on a Dell monitor. This was designed for the classic 24 inch Dell monitor every workplace seems to have, with the horizonal line across the back. Mount is designed to hang over the…
I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.
This is an add-on for the "Continental Europe Topographic Relief Puzzle" https://www.thingiverse.com/thing:5331772 . It includes the Nordic countries Finland (FI), Sweden (SE), Norway (NO) and Iceland (IS). These countries were not…
This holder was designed to attach iPhone to LG monitor (34WN80C-B UltraWide Curved), to use the iPhone as Continuity Camera during video calls. Even though it was designed specifically for my LG monitor, users in the comments confirmed…
Basic magnetic cupholder I used when I drove haul truck. Stayed on the doors and cab through large bumps without issue. I recommend ABS if you want a tough one but PLA works just fine. I found PETG to be too brittle in cold weather.…
Easily use our iPhone with MacOS Ventura as a webcam. This holder hangs on the screen and holds your iPhone. It was designed to be printed with a .6 mm nozzle and a .3 mm layer height. It fits my iPhone 13 with an original Apple Silicone…
Remix of https://www.printables.com/model/273343-car-cup-holder-bottle-adapter-nalgene-yeti-rambler/comments with slightly larger ID to hold large Contigo rambler. Closed at the bottom to capture any spillage. With Jaguar XF logo or…
After designing and posting a magnetic continuity camera mount. I realized a lot of people might not have or want to purchase a magnet array, so I created this basket-style continuity camera mount.
iPhone Continuity Camera Mount for Samsung Q70 TV. Used in conjunction with an Apple TV with the new FaceTime feature in 2023 release of tvOS 17 so that you can mount your iPhone above your TV. I designed it with a Samsung Q70 TV and…
Seedlings Pot - Continuous Self Watering System (PET Water Bottle)
bently continental gt4 scale to ur own liking :D I AM THE CAR MAN al made in in blender
iPhone Continuity Camera Mount for MacBook Pro. (No MagSafe Required) Print Recommendations: Print the mount on its side vertically so that the printer doesn't need to travel across open space and produce saggy lines. Post Print…
Halter für das Kamera-Übergabe Feature in macOS Ventura. Mit diesem Halter kann ein von der Kamera-Übergabe Funktion unterstütztes iPhone an einen iMac oder iMac Pro befestigt werden. Bisher konnte ich nur Halterungen für die M1 Mac-Reihe…
Contiguous United States Topographic Map Wall Art This is a ~50"x20" wall art map of the contiguous United States, modeled from self-processed real elevation data (original sourced from Viewfinder Panoramas ). I couldn't find an already…
I remix this great model to suit my HP EliteDisplay E243 monitor. I also increased the length a little bit.
the bookmark is 0.6 mm thick, so 0.2 mm layer height is prefered
Made to fit an iPhone 14 Pro or smaller. Most curved monitors should work, this was designed for a curve of 1500R but it has some wiggle room built in. Print with the flat side down, supports are optional - if your printer can't handle…
I found a couple prints floating around for sale on Amazon but they were meant for cans, I wanted to be able to take my Contigo go cup full of coffee on the trail with me. Fits two styles of the Contigo cup, they are both a few years old…
This is an old design I no longer recommend. Instead I suggest this design . Why is it discontinued? Here are the main problems with rewinders of any kind: Very difficult to tune to keep working A new spool is heavier and requires more…
This is a remix of the existing model that fits for the thicker MacBook Pro (2023 model) and the iPhone 14 Pro with leather case. Hook is 5mm wide and slot for iPhone is 11mm wide. On the last image is the comparison with another model…
Simply clip it on your page and mark your last read page.
I did a poorly job in sizing them so I included the .f3d, if someone wants to remix it. I haven't testet them yet, but I'll upload pictures when I do.
Use MagSafe compatible iPhone as webcam on MacBook Pro and air. Used magnets from aliexpress .
A mount to use your iOS 16 (Beta) MagSafe equipped iPhone as a Continuity Camera to replace your Apple XDR Display. Note this model has not been tested but is based on submitted measurements:…
This is a quick Remix of the Continuity Camera Holder for my old Thunderbolt Display. I couldn't find a holder which fits onto the old Thunderbolt Display so i made my own.
This is a mount to attach your iPhone to the top of an LG Ultrafine 5K 27" display for use with Continuity Camera
Bentley Continental GT 2026, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
This is my version of a Continuity Camera. It has a wider slot for the phone to sit, ensuring it won’t fall out. Also the slot for the phone will fit all phones and most phones with cases. If there is a huge gap, I designed 1mm, 2mm, 3mm,…
The perfect book mark
Be Extremely Careful when removing from build plate. I highly suggest letting it cool before removing from the plate. I printed in .15 mm layer height but you can probably do .2 as well. ENJOY!
I no longer use this, now running TAP . ---------------------------------------------------------------------------------------------------------------- My own Voron gantry mount for the Euclid Probe . - Docking is near min X and max Y…
With Mac OS Ventura and iOS 16 now released, one can now use your iPhone as a far superior web cam for your MacBook. I challenged myself to design and print an iPhone adapter instead of ordering the Belkin adapter. Did some research,…
Print all parts flat on the build plate, then assemble as per the image. You can choose to use either the triangle or kite shaped pieces depending on your personal preference. Try different colors for different shapes!
Adapter für IBC Contianer 60x2,3 Feingewinde auf 60x 6 Grobgewinde
Make sure to orient the shelf correctly on the print bed to avoid overhangs in the mounting points.
This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon
Inspired by https://www.printables.com/model/223040-magsafe-iphone-holder-for-continuity-camera-in-mac, but since I only have an iPhone 11, I can't use a magsafe-holder, therefore I decided to create this little gadget, which allows any…
A drill bit is easy to turn once by hand, then you have to regrip and do it again. This design allows for continuous turning. Use one hand to hold and push the drill in, while your other hand cranks the drill bit around and around. Easy!…
The continuous shelf designed by Ivan has been as handy as the Skadis pegboard. One thing I wanted to be able to do was have a safe place for my Lego VW T2. The continuous shelf fits perfectly, but I was worried that the VW would roll…
Update: now available as a .f3d file with almost everything set via user parameters. Adjust as necessary to your specific monitor! This model requires an Apple MagSafe charger to hold the iPhone (and keeps your phone charged while you're…
a quick print to mount your iPhone to your Macbook to use it as a webcam https://support.apple.com/en-us/HT213244 Print with side orientation with supports.
Continuity cam mount for iphone 12 with cover, designed for Dell P2418D. The part that clings to the top of the screen measures 15mm. Printed mine with 3 perimeters and 20% infill at 0.2mm layer height
You like the IKEA Skådis continuous shelf but you want that top shelf stuff. This bracket reaches a little higher and can grab the top edge of the pegboard. I had to move both hooks - in case you're worried about shelf height it will…
Continuity Camera: Use iPhone as a webcam for Mac iPhone holder of various sizes/by model. [Apple Manual]
This is a three-part MagSafe mount for any display that is up to 22mm thick. You can either use the rear camera (for example as Continuity Camera) or flip the holder over and use the front camera the additional screen. Materials 1 M3*40…
This mount allows you to dock your iPhone to your Mac or an external monitor and use your smartphone as a webcam on your Mac with Apple's Continuity Camera. The iPhone requires iOS 16 or higher and the Mac requires macOS Ventura or…
If you wish to upgrade your AB motor, you might encounter the same situation as I did. The original motor of the Ender 3 cannot be properly mounted on the Z-axis motor bracket. Therefore, I designed this new motor bracket to allow the…
Print in ASA for durability and UV resistance. 100% infill for best mechanical strength.
A continuity camera mount for using your iPhone as your webcam on a MacBook Pro. Requires a MagSafe charger that wedge fits into the mount. Triangle adapter is for adjusting angle of phone if so desired. Category: Mobile Phone
This is a remix of Ivan Urbánek's fantastic Continuous Shelves bracket, the peg is slightly reduced in thickness
This is a 3 slot MLok Handguard with a continuous picatinny rail. You can now install things like this comically large M16 carry handle or move your scopes anywhere. Longest inner barrel this version can cover is 173mm. No supports…
