733 modeli
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is a remix of agepbiz 's Pull Copter Finger Ring . No assembly required! (Although you do need to remove some support material.) I merged the ring and frame parts together, removed the no-longer-necessary screw holes, and changed…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've made a kit card model of the helicopter I really like. This model can be displayed everywhere and can be great gift. Printing instructions: Layer height: ≤ 0.15 mm Infill: 100% Material: PLA (PETG might work too, but I have not tried…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
An ode to the cereal box whirly copter toy. This 4 piece, snap together assembly is easy to print and easy to use. Notes: Keep print orientation as is. Use supports on the cabin and bottom files. To assemble, snap cabin into bottom…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Aerodynamic twist copter. Powered by friction. You'll have lots of fun with this flying toy. How to fly the Twist Copter Hold the Twist Copter with the stick sandwiched between you hands and the propeller facing up. Now, rub your hands…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two colour simple design, 120mm diameter, printed using 0.15mm layer height, Prusament Galaxy Black PETG and eSun Yellow PETG. Apply the colour change at layer 14. Enjoy!
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leonardo AW139 Helicoper Angle Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
This is a very overcomplicated helicopter to protect an egg from cracking upon being dropped from a high height. It requires a few extra parts. PARTS 6 1ft Skewers - About 3 mm or so, you can drill out the holes more if needed. 2 Bearings…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Airbus Helicopters H130 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
100x160mm sign, advertising the ACME Helicopter Hat, yet another impossibly unwise ACME product. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Projectvideo: https://youtube.com/shorts/1tkvioQbD9o v2: https://youtube.com/shorts/hchjgssc5oo The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Prints with no supports, slow down for best results. Rear door does not open. Also available: Original PIP Helicopter:…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
Update: See Pullcopter V4 on Thingiverse , currently entered into a contest there. I thought it would be fun to design a pullcopter toy with over-engineered features, that is, interesting improvements that aren't necessary for the…
Benchy as a helicopter with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. Check out my other models here 👀 Check out my other Benchy remixes here 👀 Checkout my other Benchy…
Introducing the print-in-place helicopter! Note: This is a very challenging print! Your temperature settings have to be fine tuned as well as your flow rate, and your bridging and overhangs need to be mastered before attempting this. The…
Print in place helicopter kit card. Assembly required. Printsettings: 0.16mm layer height No raft No support
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Inspired by samaras/helicopter seeds, I designed a projectile and launcher. Don't expect it to shoot really far, but in my testing it usually gets 10 to 20 feet before fluttering down. Your mileage may vary, but so far, it seems very…
This is a remix of an original Balloon Helicopter, but without a need of straws. The wings have adjustable mechanism to enable rotation There are 2 parts: helicopter balloon connector - inserted into helicopter part How to use: Print both…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Print your very own FPV Drone (kind of)! It is just a model of a FPV Drone, not really for playing. It was designed as a giveaway for Maker Faire in GermanY Printing: Layer height: < 0.2 Supports: No Brim: No First Layer Speed: <25mm/s
Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…
NEW VERSION HERE - https://www.thingiverse.com/thing:4090005 Print Settings Notes: Print blades with no supports and gear upward. Front and back print with supports on their sides (so that the teeth face upward). Print only with support…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
the propeller should spin the model needs to be glued together the helicopter very realistic need to use a support
No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits. Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to…
Assembly Instructions (also available as PDF) About the EC 135 The Eurocopter EC135 (now Airbus Helicopters H135) is a twin-engine civil light utility helicopter produced by Airbus Helicopters (formerly known as Eurocopter). It is capable…
Helicopter rotor assembly with turning rotor blades and adjustable pitch / collective. A great model (thanks to the original designer) which, after considerable time and tinkering, is now easier to print and fit together. Printing :…
No Supports!!
This toy is easily printable and is articulated. He flies !! I imported it here because this way everyone can put their g codes and share their opinion :)
This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…
2× and 3× longer copter key for better fly ;-) Remix of https://www.prusaprinters.org/cs/prints/35410-pull-copter-finger-ring Enjoy it!
Improved version that prints in-place and the ring is attached later. I recommend to sand the surface that connects to the base. I have not changed the blade from the original model. The key is also offset for easier hold.
Rubber Band Copter , available as kit card and as individual parts. Easy to print and easy to assemble. No additional components required except: - a robust rubber band, - a drop of oil. How to print: Line width 0.4 mm, layer height 0.16…
These Hand Helicopters are the bomb-diggity. Perfect gift for children. Print Settings Printer: Anet A8 Rafts: Yes Supports: Yes Resolution: 0.3mm Infill: 100% Notes: -- It's very important to do 100% infil for this model because of how…
kit card of the EC 135 (Airbus H135) helicopter model. you can choose any color you want, it's up to you. the composition of the model is very simple and you can do it according to the photos. Enjoy printing and sending your creations.…
This project creates a fun toy/craft to help illustrate the forces of lift, and principles/physics of flight. To 3D print the parts it is recommended to have your Z height down fairly low. This should result in the first layer fully…
I had the idea to make this model after seeing the extremely popular Pull Copter Finger Ring by agepbiz, sadly I soon realized it contained 5 parts and needed screws so I set to work redesigning the pull copter and optimizing all aspects…
Easy to print and nice locking helicopter.
I create a Toroidal Rotor with the interface of the Pocket Copter by agepbiz. Print with .15 to .16 layer height for smooth blades. Happy printing and launching.
İt is printable.
🚁 A 3D model of the Minicopter from Rust, showcasing its scrappy, survivalist design. Recreate this iconic vehicle as a physical model.
Model: Airbus Eurocopter EC-135T2 helicopter !!!MODEL BUDE OPRAVEN DO 30.9.2024 MOMENTÁLNĚ NA TOM PRACUJI!! !!!THE MODEL WILL BE REPAIRED BY 9/30/2024 I AM WORKING ON IT CURRENTLY!!! English: Czech: Print Settings Printer brand: Elegoo…
Helicopter kit ideal as a gift. looks beautiful as a decoration. after printing, use pliers to cut out the objects and clean them up as needed. Follow the steps below to fold. Of course you can build without instructions, it's more of a…
This is an even larger propeller for the Pull Copter (https://www.printables.com/model/227852-strong-flying-propeller-pull-copter-no-supports). I made it 225mm, which fits nicely on the X1C print bed without needing to remove the…
This is a modification of Meister Edel design “strong flying propeller / pullcopter (No Suppoerts)” which sets off already quite fast and the flying propeller goes really high. Thank you for your nice design! But … I asked myself what to…
About the Mil Mi-8 The Mil Mi-8 is a medium twin-turbine helicopter, designed in the 1960s and introduced into the Soviet Air Force in 1968. Russian production of the aircraft model still continues. In addition to its most common role as…
Inspired from a real maple seed that blew on my patio one evening. Exactly the same size as the original seed. I tried different versions of the wing thickness and the more layers it got, the less it would spin requiring more height to…
This is a remix of this helicopter toy with corrected part orientations and the scale of each part fixed. I'm still trying to figure out a sensible modification to the ripcord because it's difficult to print as-is. Every print must…
Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…
Vlastní návrh inspirovaný dopravním prostředkem ze hry Fortnite. Printable Fortnite choppa is finally here. Print instructions Vytisknout, slepit, rotor přichytit 3mm šroubkem, nabarvit, roztočit a hrát si. Držte se přiložených obrázků…
Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…
Fits on a Prusa Mini, no supports needed, print 2 propellers and assemble as in the photo, at 90 degrees to each other and with the raised centre facing down. I used PETG for its flexability. Does not hover only slows the decent down. in…
I had to actually redesign the adapter so it would not fall off while launching the propeller. Normally this adapter is designed to come loose and fall down when using the beyblade launcher in order for the whole beyblade to fall and…
My family loves Bluey and wanted something that wasn't made yet. This is a stump, done in the Bluey art style, sized for the official toys to fit onto for pretend play. Prints in one piece, no supports needed. I specifically thickened the…
You can put it on your desk or ad a stand for your wall so you can display it.
As promised, here is the Bell 407. A bit of a random thing, but I really like designing helicopters, and this one looked challenging. It's color-separated so you can print the windows in a different color. I hate painting stuff, so I'll…
Wallart of EC135 helicopter, scaled to fit MK3s bed, also included original STL (1m long)
My version, no assembly, no supports, smaller body, prints cleaner, puller has a stop. After printing just snap off ring on bottom and good to go. Gaps for moving parts 0.2 mm 0.3 mm.
These are optional parts for the Pull-O-Copter by Toastify. https://www.thingiverse.com/thing:2428046 (Thank you Toastify!) Parts: 3-bladed 150mm diameter propeller 5-bladed 150mm diameter propeller Blade sections: NACA 2416 @ the blade…
I gifted the original version to a 6 year old boy. He had a lot of fun with it but also a hard time to get it to start. He mostly struggled with getting a good grip on the ring, as it is way to big for his hands. So I modeled a new grip.…
A helicopter model inspired by the Chinook. However, the fuselage of the helicopter is shortened due to printing on a smaller printer. The helicopter is designed to transport Hot Wheels cars. The model kits are divided into fuselage and…
a very fun model that will keep you and your children busy for a long time. I myself had a hard time getting away from it. Very simple print. you take it out of the printer and you can fly immediately. no extra needs. IMPORTANT! after…
After printing the model you have to join the two parts (you can add glue if you want). And to make it fly you have to turn it by joining your palms and sliding them.
Hi everyone! This is my 3D printed Tricopter test platform for Ardupilot FPV setup. More about this project in my video: https://youtu.be/Mi7w18WuLz8 Parts used in this project: 1x Mateksys F405-SE Flight Controller 3x Emax RS2205 2300KV…
Joining the Whomp Rocket and Whomp Glider, this Whomp Copter adds a new twist to your cubical warfare arsenal. Use 0.4mm line width for optimal printing. Prints nicely without supports, rafts or brims. Make sure to sand off any printing…
I haven't printed this last version of the part with all the switches, yet. Please share your results if you print it. Don't forget to like and comment. This collective grip has: 3x axis 1x 4-way hat switch 4x press-buttons Print: Printed…
This toy really flies out of your hands! Just give it a brisk twist and watch it rise. Printing's simple. Choose one of the five versions (solid, hollow, longer handle solid, longer handle hollow, or the variation) and print two instances…
I had one too many close calls with my quadcopter props, so I decided to design a prop guard. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Notes: Updated the design to limit the weight,…
Ingenuity , nicknamed Ginny , is an autonomous NASA helicopter that operated on Mars from 2021 to 2024 as part of the Mars 2020 mission. Ingenuity made its first flight on 19 April 2021, demonstrating that flight is possible in the…
This is my 3D-printable hexacopter (drone) frame, designed to sit in roughly the same size niche as the old DJI Flame Wheel F550 kits, but with the ability to easily print and replace anything you break if (when!) a crash happens. If you…
Wall Art Silhouette model of the AS 350 B3 helicopter. Adjustable size. I accept model suggestions or ideas you have.
Blade for an RC helicopter print instructions: - check first if needed to be mirrored - straight edge on the bed - brim 2-5mm - nozzle 0.4 or smaller
This Pull copter is especially designed for using inside the House to play with your cat. It is made out of 9 printed parts and a standard aluminium rail with a diameter of 16,3 mm and a height of 69 mm and a M3 Screw with 30 mm length.…
A simple print you can start having fun with only seconds after it comes off the printer, just insert the stick into the hole in the propeller, spin it counterclockwise as hard as you can, and watch it fly. Recommended to be used outside.
Set of rotors for (and compatible with) funny 3D printed toy Pull Copter Finger Ring . Basically it's two sets of remixed rotors: First set is a remix of original rotor from Pull Copter Finger Ring model from Agepbiz into two sizes…
A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…
Large version of my EC135 wallart , precut and scaled to fit on MK3s, also inluded is original sized file (1m long). Prints easily, glue with superglue and display (I am using poster gum to mount on the wall)
IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…
To fly it, put the stick in between your hands and spin it as fast as you can to the right.
Small printable helicopter. The two halfes can be glued together, the window can be glued on and the rest should just fit snugly. Pootje = landing gear Body links = left body Body rechts = right body propellor = propellor raam = window
Benchy as an Avatar style helicopter with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. .stl & .3mf files available. Assembly: Firstly, fit prop blades using the screws to…
