171 modeli
History/Story of the Naquadah Generator: https://www.gateworld.net/wiki/Naquadah_generator Prop utilizes Magnets to activate lights ( when Control Interface Handle is in the on position it activates a magnet activated switch turning it on…
Idaho, USA (ID) Topographic Relief Map with Rivers and Coastal Waters Idaho, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic collection…
The Greatsword of Radahn aka the Starscourge Greatsword, scaled to be a Dummy 13 weapon. Curved greatswords of black steel wielded by General Radahn. A pair of weapons decorated with a lion mane motif. Radahn earned considerable renown as…
Naquadah Generator used in the TV series Stargate SG-1, Atlantis, and Universe. Please note that there is a print list that specifies quantities and colors of parts. There is a drawing to help you associate the part names with their…
https://www.thingiverse.com/thing:4524495. - Original Used PLA Prusament .4mm Nozzle @ .2mm layer height. 15% Infill and 3 walls. Worked incredibly well for me! Make sure to like and subscribe!
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
replacement part to mount your imou ipcamera upside down
For F1 fans here is the 2021/2 Jeddah Street Circuit layout for you all to enjoy. The model was created from an SVG found at Wikimedia and my thanks to the original creator GabrielStella I also wish to extend my sincere gratitude to Arkay…
A inspiration of azhdaha tree from genhsin impact ! completely handmade ! I cut it in several pieces to print it :) Use for decoration of Pogona terrarium :)
Pole mount for dahua cctv cameras, it is designed to hold the cameras with the rounded base by inserting a nut and an M5 screw. To mount it to a pole you will also need a U shaped bracket, as the one used to hold antennas. I hope it's…
This is a faithful reproduction of the Jeddah Corniche Circuit. Its dimensions are 20cm long, 3cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it looks…
Recorded in full timelapse at https://vimeo.com/514169876 Su is known by many as the one for negotiating peace with Orc Chief Nakhbruh for all inhabitants of the plains and the mighty forests that surround. A quiet and unassuming soul,…
Needed to be done, even added a slight smile. No supports needed on Kobra Max, results may vary...
Covered under CC Share Alike only because OG model is. I prefer Public Domain Dedication. The Buddah Model was added to thingiverse by user https://www.thingiverse.com/geoffro/designs
Jeddah Street Circuit, Jeddah, Saudi Arabia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
From my personal photograph, I have transformed a Dahlia via HueForge! Try different colour combinations. INSTRUCTIONS: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Dark…
some people have asked why the trays for explorers, towns, cities, dahan and blight are the only ones that don't come in pairs. This remix adds these trays as duplicates as well. this will be especially useful if you are playing with more…
Elephant Howdah and Mahout The history of the Elephant Howdah dates back to ancient India, where it was used by warriors for transportation during battles or hunting expeditions. It provided them with an elevated vantage point and a means…
Bu projede, piyasadaki zayıf şarjlı el süpürgelerinden ilham alarak 10 kat daha güçlü bir versiyon tasarladık. 3D baskı gövdesiyle tamamen yeniden tasarlanan bu mini süpürge, atölyede veya arabada kullanmak için mükemmel. 👉 Tüm yapım…
This is my model of the STARGATE Naquadah-Generator / Naquadah Reactor. I designed it form pictures online, so it is not super exact. I designed this for fun and it´s my first project like this, so don’t be to hard on me. I only printed…
I made this mount a 8 PoE - Dahua - NVR4108HS-8P-4KS2/L in a standard network rack. You will need to remove the screws from the side of the NVR and replace them with slightly longer ones.
Two Surface mount designs for Dahua VTO2202F-P and VTO2202F-P-S2. The OEM part is VTM115. I designed this because Aliexpress delivered my doorbell but cancelled my order for the case, so it was designed based on the doorbell and not the…
Dahua PFA135 junction box Dahua PFA135 junction box - 38° Category: Camera
Box to dimensions of Dahua PFA136 to fit for example Dahua IPC-HDBW2441E-S. This box has no cable entry points, they are easily drilled afterards if required. Or added yourself, step file included. I used the little notch in the camera…
Prop of an advanced power generation unit reverse-engineered from alien technology, and widely used by the Stargate Atlantis expedition. The generator is powered by a small amount of the mineral naquadah, and runs cleanly with a…
DAHI es una empresa argentina que hace yogurth. El yogurth es muy bueno y todos los que lo hemos comprado guardamos los frascos. Estos soportes permiten colgar los frascos, por ejemplo en la puerta de una alacena. La distancia entre…
Saudi Arabia Jeddah The first place is Max Verstappen number 1 You can build a racing circuit in Saudi Arabia using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 3× A2CLRC…
This is a 3d Scan which a made with the App KIRI Engine. I hope u enjoy this big smiling buddah!! For a multicolorprint there is the 3mf file included aswell as the stl file for one color prints. Have a nice time printing it!! :)
Formula 1 Jeddah Corniche Circuit Saudi Arabia - with elevation and DRS detection zones. Can be printed as it is with 0.4 nuzzle.
Size: 180 x 179 x 174 mm Scale: 1:210 This is not an MMU-style multi-color print. It’s a series of single-material prints that, assembled, form a full-color replica of the Meridian temple. I printed the building in gray, spray-painted it…
„Dead flesh. Unbroken vow. The stars once bowed to him. Now he rises again – to really annoy you and make you want to throw your controller against the wall!“ This print requires some 3D printing experience. You should be familiar with…
4" x 6" plaque can fit in a picture frame. Print instructions You can pause print and switch colors at layer 1.1
You can get better results if you set your top and bottom layer infill to something like hilbert curve in order to get more radially aligned printlines.
OBJ from sketchfab converted to stl and fixed with meshmixer and tinkercad. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: any PLA, ABS & PETG - Category: People
While this looks a lot like the first one - this one is twice as hard… On my original puzzle, the pieces had essentialy two possible orientations for each piece. of course with no easily identifiable design (the top looks all alike). At…
Most updated version: https://www.printables.com/model/1132162-burley-temple-hollow-wupdated-steeple
foldable Dahon bikes have the seat tube that touch the ground when folded. this cap help to prevent scratching interior diameter 28.5cm exterior diameter 33.9cm
Take a look at this Scout woggle featuring Dahinda, the Jungle's frog/toad. It's a perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's 'The Jungle Book.' According to tales by Rudyard Kipling, Dahinda…
IP_cam_mounting_on_pitched_roof_16_degree
This was an ornament I made for my extended family and close friends. I live in Idaho so this was one of those “someone from Idaho loves you” ornaments. And you can probably tell by the placement of the heart the approximate area where I…
El arma característica de Black Dahlia de skullgirls
This is a highly detailed model of Kootenai County and the surrounding lakes, spanning North to the Canadian border and South to the tip of Lake Coeur D'Alene. This model encompasses lake Coeur D'Alene, Hayden Lake, Lake Pend Oreille, and…
Pole mount/universal mount for dome policetech, dahua IP cameras
2 story dvr case for the dahua XVR5104HS-I2. i used: 6 m2x4 inserts 6 m2x6 screws
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
My design of a cctv dahua security camera support. Print instructions Unassociated tags: security camera Category: Camera Summary My design of a cctv dahua security camera support. Print Settings Printer Brand: Any Printer: Any Rafts: No…
STEP-Modell leider nicht mehr gefunden
This is a multiboard-mountable holder for a single bottle of Dahler Rowner FW Ink. It mounts via a bolt locked snap, so you will need to also print one of each of these: Multiboard snap Multipoint small thread
Parametric Safety Latch (for Dahon Folding Bike) Replacement Part Prevents accidental opening of steering tube lever Easy print in two parts, no supports, no glue Requires M3 screw to screw into the fitting on the bike. OpenSCAD source…
A spacer box for my Dahua IPC-HDW4631C-A for wallmounting. The scewholes are 5mm. The diameter of the housing is 106mm, the mounting holes are 35mm apart. There is no cable entry point. If you need one, just drill a whole or add it…
ENG : Short Oil Adapter This compact and practical adapter is designed to help you avoid wasting precious drops of oil during your oil change or maintenance. It’s perfectly tailored for use with Bardahl oil bottles, providing a secure fit…
This custom-designed rain visor is specifically crafted for Dahua outdoor IP surveillance cameras. It provides reliable protection against rain, ensuring your camera lens stays clear and operational in various weather conditions. The…
Dahan — Spirit Island tribal hut token Replacement tokens for the dahan (Pacific-Islander villagers) in Spirit Island . Stylised as miniature tribal huts so each one reads at a glance as a village, not a wooden cube. The hut is split into…
Loved the original design! But most of the water would go through the gaps, so I modified it to give it a bottom. Was my first try with a CAD tool, but I'm really satisfied whith how it turned out!
Dahua camera 110/122mm 90-degree corner mount
Small mountain range decor that works great on any unused shelf or dresser space. I also included a small tree so you can add them where you like.(The tree might need a like scaling to fit the model)
This is a case for the Dahua miniature eight-channel NVR N41C2P Series. It doesn't have a place for the harddrive, but it does for the fan. It requires nine threaded heat inserts for M3 bolts, as well as 4x m3x8 bolts. You can use the…
This is a hollow version of the other Burley temple I designed.
Table stand, for DAHUA VTH1510CH video intercom monitor. Designed for video monitor installation using an original metal mounting frame.
Recently, I purchased a Dahua video doorbell, but it didn't come with a mounting box. Not wanting to spend over $20 for one, I decided to design and create one myself. The box I designed has M4 screw holes on the back, which are spaced…
This is a very specific use case, but I had a Dahua camera designed for a Dahua PFA136 adapter that I needed to fit to a Dahua PFA134 junction box as we didn't want to buy and install a new junction box. The Dahua PFA136 has a larger…
Added a golf driver to the Gopher Buddah to use as a surprise trophy for a family golf tournament.
Same bracket that comes out of the box.
Simple adapter to attach industrial cameras (Daheng or Allied Vision) to a 20x20 aluminium extrusion. BOM : 4x M3x6 screews 2x M3x4 screews 2x M3 t-nuts You will need 4x M3x6 screews to mount the 2 plastic pieces together. Then the 2x…
a sculpture depicting the meditating Buddha
Base para colocar la cámara de seguridad dahua en un tripié utilizando una tuerca de 1/4 estándar para enroscar al tripi
Hello, this is an outline of the state of Idaho simplified and split into three parts . When all three parts are assembled it should measure about 14 inches long (355.6 mm -ish) and about 9.3 inches wide (237.31 mm -ish). Secures easily…
A keychain of the state of Idaho, complete with hole.
My trimmer has a rubber washer that had perished - Dahle only supply a complete new head and I couldn't find a washer that fitted readily. Printed this in TPU and it works well. My Timmer is model 507 but it should fit any that use the…
I made this model for IMOU Cue 2 camera. I wanted to create a hood covering SD card slot and the reset button. Made this model in FreeCad after a few trials. Printed in Pure White Numakers PLA+ 1.75mm filament on 0.4mm nozzle Anycubic…
Transition from @DaHouzKats "Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure" to 50mm PVC pipe outside of the enclosure. That way you can lead the exhaust through a window or something. Mount with…
This is a multi-color remix of the Jeddah track and name. They are now attached and the track portion has a color change.
Easy to print. I've printed with 0,2mm resolution for beauty but I think 0,3mm is also fine. Horizontal one is 2 part print. Camera in this case is:…
3D model of the Jeddah race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Take a look at this Scout patch badge (two versions) featuring Dahinda, the Jungle's frog/toad, ready to be stitched on. It's a perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's 'The Jungle Book.'…
Use Tree-like supports. Enjoy!!!!!!
The model consists of the base, the sign and the track. The models are printed in black for the base, black and white for the sign and gold for the track.
Screw cover cap for Dahua bullet cam (tested for mod. IPC-HFW3841E-S-S2), in order to have a “clean look” of the cam base or, as in my case, to protect the screw head from dirt since I installed the camera horizontally on the top of a…
This is the first state capitol building I modeled. It looked like a typical capitol building and didn't look too hard to model. Category: Buildings & Structures
Was not available as a spare part. I Rebuilt this.....thanks to Fusion360 Dahon Falding Bike handlebar clamp or clamping plate. Handlepost Upper Section Cap (Lenkerklemmplatte) for 28.6mm For a 25.4mm Handlebar. Should be milled from…
Took inspiration from the genuine junction box (PFA121) for my Dahua Bullet IP Camera - https://www.dahuasecurity.com/products/All-Products/Accessories/Camera-Accessories/Camera-Mounts/Junction-Boxes/PFA121 Compatible with IPC-HFW…
Framed with colorchange suitable for wall mounting. Based on OT prophesy aobut Jesus beind the “Lion of Judah.” This allegory is used in “The Chronicles of Narina.” The Lion Head is from https://www.thingiverse.com/thing:2429239
Circuit de Jeddah formula 1 2025
Nice state keychains.
Use tree-like supports. Doesn't Include Miquella. Enjoy!!!!
Komplette Anleitung unter complete documentation at https://cool-web.de/3d-druck/ersatzteil-selbst-gedruckt-dahle-507-papierschneider-repariert-cut-cat-rolling-trimmer-gummiring-ersatz.htm Category: Office
Noticed a disturbing lack of cool death-metal logo signs. At the 3mm Z-height the model is at now, add a color change at Layer #8(1.60mm) Can be scaled to whatever dimension you'd like.
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection. Make them any color you wish.
Designed this to organize my food cupboard a bit more. This organizer holds 6 packs of the Idahoana Instant Mashed Potato Packs. Print with 3 walls if using a .4 nozzle. walls are 1.2mm Dimensions: Width 6" Depth 6" Height 4.5" 3MF STL…
Use Tree-like supports. Enjoy!!!!!
Saint Absadah statue is a saint absadah statue devotional sculpture designed for respectful display and 3d printing. This devotional sculpture is ideal for display on a shelf, tabletop, altar vignette, or as part of a religious art…
This is a replacement part for the DAHLE 558 (1. generation) paper cutter. This is the left side. When you need the right side, simply mirror it in the slicer. I hope it helps
Alor Setar Kedah Rukun Negara Fountain https://maps.app.goo.gl/bRYehKB72G4vCRDR9
I needed a insert for my spicecontainers so I made this.
I had the bike seat of my Dahon folding bike fall off while riding. It turned out that the thread of a custom made nut out of aluminium / aluminum had failed causing the whole clamp to come apart. This model replaces this custom nut. All…
