67 modeli
I ended up needing the Yellow adapter when the original file was the Blue adapter. Old deadbolt had the Green adapter, so I mocked it up as well.
Made this for a coworker that did not have the right adapter for his new lock to fit his deadbolt. I don't have exact dimensions of his lock but he says this size worked perfectly. This is likely the RED adapter listed in the $10 adapter…
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
Y Link for the SCX24 Deadbolt. Works great on both of mine after some trimming to round the edges. It has clearance for the driveshaft. Prints to stock size. I'm not experienced enough to figure out how to bevel/fillet all the edges to…
I made this flip lock for deadbolts to be used in apartments, hotels, etc. It renders the key useless from the outside of the room as the deadbolt latch inside can no longer turn. This is great for keeping out unwanted guests,…
Print with supports. Designed for locks with a 64mm cover, scale as needed. To install, loosen the two screws on the interior plate of the deadbolt. Slide the cover under the interior plate from the bottom. Tighten screws to secure in…
I used this with a zip-tie to cover the deadbolt lock hole in the utility door that I don't particularly need a lock on, but I wanted to keep the cold breeze out.
Adapter for August locks and Medeco deadbolts. 100% infill, brim and supports recommended
After being disappointed the original model didn't fit my Deadbolts big tyres I decided to try and shrink them a little and stop them rubbing on the front wheels I'm still a beginner at CAD & 3D printing but I think these came out alright…
Might have to fix some issues but easy and cheap to print.
A simple deadbolt lock I designed to replace a worn out latch on a sliding door. The model prints in place using the provided orientation with .2mm layer height and 4 walls. Tree supports work best. I also recommend using a brim for…
I initially printed the SCX24 chassis design by Harley Designs from Thingiverse, but found it did not perform optimally for my specific build. As a result, every component of the original model has been either modified or completely…
I found out the hard way that the e1 chassis doesn't jive with the asymmetric linkage setup on the Deadbolt. So instead of finding alternate linkages and driveshafts, I just remade the e1 piece with the motor subframe screw holes moved…
I have modified several parts from the original design to make this more robust for my use case. This now uses a countersunk M3x16 screw to attach. The bolt is threaded and the knob is countersunk. There is an optional version with a…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
With this widening, the vehicle looks much beefier. No modification to the original vehicle necessary. For assembly, it requires: 4x M3x8mm screw 4x Magnet 10x4.5mm with female thread M3 Print Settings Notes: Print with Support.…
Locking mechanism The Knob can be pushed down to lock and pulled up to unlock. Locked — Knob pushed down ↦ 4× deadbolts engaged Unlocked - knob pulled - lid free to open Assembly To clip the lock cross on the pin in the lid - fold the 4…
just drilling no extra mount have fun! No top version is coming out soon!
created mounts to get deadbolt body on the ax24 gave it enough lift that it wouldn't rub
This is a simple storage box to hold an Axial SCX24 (Deadbolt wheelbase). It is based around another SCX24 stand that I designed (see my other models). It also incorporates a storage area below the crawler for storing small objects such…
Fits 64mm standard USA deadbolts just like the parent model, so scale it as needed to fit your deadbolt. Print with supports and go really slow on those overhangs. To install, loosen the two screws on the interior plate of the deadbolt,…
requires your own drilling easy to print hope you like it Thanks, and have fun!
requires the same JUL bracket as the top version requires drilling for mounts if not upgraded have fun enjoy the three version of scout.
This is my beginning attempts at making a battery compartment for the Kevo series of Kwikset locks. My lock is Bluetooth and model 925 but it may fit others. (note, the black one in the pictures is the OEM compartment, the white one is…
I'm now selling these on my website! https://www.3dlocksport.com/products.php#!/Double-Deadbolt-Holder/p/158655713/category=39551008 This is a holder that you can insert 2 Kwikset deadbolts into. In mine, I actually changed the key pins…
Landlord won't change the locks? Disable your deadbolt. Fits multiple styles. Makes all keys and lock picks absolutely useless. Keep out your EX, play a joke on your room mate. Prevent the maid from opening the door EVEN IF YOU HAVE THE…
Temporary fix for a door that should NOT have a deadbolt hole
The exact same model except a little bit deeper. The deadbolt is a Weiser lock if that makes a difference.
This cover was designed to replace the battery section of a Schlage Camelot Deadbolt. It isn't a perfect match, but close enough to not stand out terribly. Category: Replacement Parts
this is a model that will print and come out good. ENJOY! MRC.
My blue adapter snapped so I printed off a few but struggled to get the adapters to fit well - either the hole was a bit too big and the fit was a bit loose or it was too small and the turnpiece would not fit even when I had measured the…
mounts directly to the frame, no bumper support required. lines up with original scout body - only works with deadbolts with original body hardware needed: 4x original screws or 2x M2 screws
The deadbolt guide (door side) on my door fell out and made it really difficult to lock since it wasn't aligning with the the deadbolt slot (frame side). Whipped together a quick OnShape model and it worked wonderfully. It prints without…
I created the model after arriving home one day and finding that the deadbolt had been partially/unsuccessfully picked, needless to say something had to be done. this device prevents the deadbolt from being unlocked while in use by…
This is an emergancy key replacement for a Schlage indicator deadbolt. Print it in a strong filament. It take only a few minutes to print so your child or coworker won't be locked in the toilet for long.
Background story: We live in a neighborhood where locking the door at night is a must :( Our main door is down a flight of stairs and it was hard to see from a distance if the door was locked. My wife asked for a solution to this. Simple…
Simple model to add a little dimension to the front of the Axial SCX10 ii Deadbolt. It is a work in progress, currently no specific mounting system so that will be up to you for now. Also needs some fit and finish before I will be happy…
I like the convenience of my Kwikset Halo smart lock, but I hate replacing batteries all the time in it. I've tried every brand of alkaline and disposable lithium AA batteries with some lasting a little longer than others, but none of…
A simple shim to increase the thickness of your door by ¼ or ½ inch for the standard ANSI 2 1/8" deadbolt borehole. Perfect for fitting deadbolts that requires a thicker door than what you have. e.g. The Level smart locks…
Adapter for SwitchBot Lock Pro deadbolt design.
Bigger hands and heavier primes need more robust knobs. DMF has you covered with Dead Fred's giant head!! Nice shape and wider grip surface it's the perfect upgrade for your SMILEY blaster.
I didn't like the look of the stock deadbolt lightbar, or without the light bar, so I designed this. This simply bolts into the original cage, and fills the space where the lightbar used to go. Category: Mechanical Toys
The Switchbot Lock Pro Adaptor is designed to seamlessly integrate with a single deadbolt mechanism, allowing users to enhance their current locking system. The Switchbot Lock Pro does not provide single deadbolt adaptor in certain…
Simple rear bumper for the Axial SCX24 Deadbolt. mounts straight to the rear of the frame without need for a bumper mount. lines up with the stock scout body. the loops are for aesthetics, i wouldn't recommend putting tow hooks on it…
No adapters for the Kwikset Convert Smart Deadbolt I got so I made my own in Tinkercad. Not bad for a first attempt I think. Printed in PETG and it has held up for a whole year. I printed at .08 but you could probably print normally at…
Fusion360 source file is included, Remixes are welcome as long as they are correctly attributed This model turns a normal Weiser deadbolt into a smart lock. I wanted to keep the actual lock and be able to use the normal key, while being…
I'm getting a deck on my house replaced later this week, and I don't want anyone to accidentally walk out the door when there's no deck there, so I designed and printed this little thing to keep the deadbolt in a locked position. If your…
This is a 5mm spacer for the U-Tec U-Bolt Pro smart lock. It fits perfectly between it and the door, matching its shape. You can easily adjust the scaling to make it wider/thinner, or even to fit a different lock of similar shape. When…
The door in my new home has a latch and a silly wire threaded through the mesh so you can pull it closed as you turn the deadbolt. Pulling the door shut was a two-handed process and usually my other hand was either carrying a deadly melee…
This is used for at least a US deadbolt. It can be placed behind the deadbolt to give the user a knub to hold on to in order to close and lock a door without a handle.
So the deadbolt for my door broke (makes you question the general quality of the whole lock), don't know why, how or when. Thought about going to the hardware store but it's a bit far so I decided to make my own replacement. This is a…
Deadbolt plate. Simple, but it works. Used PLA. Size is 80mm ⌀, Inner hole is 60mm ⌀. Object is 2.5mm thick. Model has parts to reconfigure size to your door.
Remixed a tubular design bumper to fit on SCX10 chassis. Uses 4 M3x6mm screws to attach to the chassis rail. You can attach Axial buckets (from light set AX80045) to the sides of the bumper to have rear lights. The led mount is glued to…
Do you have an ancient mortise lock doorhandle somewhere in your house, workshop, or dungeon? Did the spring for the deadbolt break, and now it keeps sliding out when you close the door? Well it's your lucky day, because now you can take…
There are three sizes depending on the hallow space of the deadbolt lock that can be used on certain doors with a mortise lockset. V1 being 0.40H x 0.20W x 0.25L, V2 being 0.20H x 0.20W x 0.25L V3 being 0.30H x 0.20W x 0.25L This is my…
I created this model to prevent someone from unlatching the deadbolt from the outside. The LiftMaster 841LM Deadbolt can be installed on the left or right of your garage door track, but this placement makes the manual unlatch on the…
I made this to be printed in glow in the dark PLA so that at night, I can quickly tell if the door is locked.
Designed a modern looking rock sliders for Axial SCX10ii Deadbolt model. It uses standard M3x6mm to attach the mount to chassis and M3x3mm to attach sliders to mounts. I printed mine with PETG material.
Replaced a smart lock and got left with a paint ghost on your door? This slim escutcheon plate covers the old Nest × Yale footprint and installs in two minutes: remove the two interior mounting bolts, slip the plate over the cylinder, and…
The Schlage Connect BE469ZP smart lock includes a deadbolt that supports 1-3/8" and 2-3/4" sizes. If you have a 3-7/8" deadbolt on your door, you are out of luck: this lock will not fit your door, and it's impossible to find a deadbolt…
Designed a battery case for powering led lightbar on my SCX10II Deadbolt. I used standard 10mm wide micro switch ( https://ie.rs-online.com/web/p/slide-switches/7856469 ) glued to the front side. Lid is friction fitted to the case. On the…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
mounts directly to the frame, no bumper support required. lines up with original scout body - only works with deadbolts with original body hardware needed: 4x original screws or 2x M2 screws
Simple rear bumper for the Axial SCX24 Deadbolt. mounts straight to the rear of the frame without need for a bumper mount. lines up with the stock scout body. the loops are for aesthetics, i wouldn't recommend putting tow hooks on it…
