595 modeli
necessities 1x o-ring (11mm diameter and 2,5mm thickness) o-ring can be taken from an old hose coupler. Assembly After you have printed the nozzle file, insert the o-ring on the nozzle like in the photo's. the caps can be easily screwed…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use a couple of screws to mount this anywhere you want your vacuum at hand. You'll need a little force to pop it into place and remove it. Make sure your screws are flush! I also made a similar one for pegboard that doesn't have the…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need a place to mount my HT and speaker mic and had a ram mount system I could use.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This fan runs on dual 18650 batteries. The necked down nozzle design increases air velocity for optimal cooling. Bill of materials: Bottom cap contact spring: https://a.co/d/hnrPVWE Sliding Switch: https://a.co/d/9z3JiiK Spring contacts:…
Wydruk około 4,53 €–5,54 € nettoWstępna wycena jednego wariantu
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transmitter console The transmitter console consists of several 3D printed parts that are glued together with epoxy resin. It is made to be used with a variety of handheld transmitters. With an optional extension, the console can be…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a flush mounted holder for your average handheld air duster. it includes a holder for each additional part as well. it has a locking mechanism for the duster to ensure it is oriented in only one direction. I included a back tap…
Wydruk około 4,17 €–5,10 € nettoWstępna wycena jednego wariantu
This is a simple massage tool I designed based on the classic physiotherapy scraper that's commonly made out of metal. It works really well before a workout to loosen up tight areas, or afterwards to massage sore muscles. You can also…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
The belt is flexible and small to fit into medium to large holes. Also conforms well to both external and internal fillets I suggest using 200-600 grit, and printing with PETG. Model is slicer scalable, although provided scale gives the…
About Over the course of the last several months, I've been adding to my handheld collection, and needed a simple but universal way to nicely display them. This is what prompted me to make my own set of these! I have attempted to make it…
A lovely candle holder for emergencies or aesthetics. Print instructions This is an easy print. Please note: supports are suggested. The supplied gcode should work well. It is a standard Prusa slicer profile. Always remember to take care…
UPDATE: 1.51 -reduced amount wifi card sticks out (11/25/24) UPDATE: 1.5 Has been released! -The case has been reduced in size and enforced in key areas. -Added external screen controls. -New power button, still goes missing but it's new!…
Deutsch: Ich habe einen schnell und einfach zu druckenden Helmaufhänger designed. Einfach auf der Seite drucken. Wenn euch das Design gefällt postet doch ein make oder lasst mir ein like da. Gerne durft ihr auch remixen. English: I…
A hard case for the R36S retro gaming device. The case was designed to allow the buttons, joysticks and screen ample room inside the case. There is room to glue in a thin piece of felt above the screen for added protection. There are two…
Changes from Original: Nintendo GameBoy/GameBoy Color/GameBoy Advance: - Thicker Bottom: ~1.4mm Nintendo Entertainment System: - Thicker Bottom: ~1.4mm Super Nintendo Entertainment System (NTSC): - Thicker Bottom: ~1.4mm Super Nintendo…
Halloween Lamp Even if it's looks a little complicated. Very easy to assemble. See third picture. All parts snap together tight, no need for glue. For printing use Clasic mode, not Arachne. I used Generic PLA profile, no calibration and…
The hook is also ideal for hanging a backpack. Ich habe es in PLA gedruckt.
An universal stand for handheld consoles PSP, Vita, DS, DSi, WonderSwan, CD, DVD, Famicom disks... I balanced it to be very stable and most handhelds consoles should fit, and many other things…
Remake of BigRedButton 's holder for a cordless drill fitted to be a supplement to the Skadis Universal hook collection by CSD Salzburg .
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
Why buying a hand-held fan when you can spend an entire day designing, printing and soldering your own? What do you need 130 type motor 8x8mm DPDT Mini Push Button 2 AA batteries 2 Springs (for the batteries) Some wires Soldering kit…
A collection of various mounting display stands for Retroid, Anbernic, and Miyoo, etc. handhelds. All models print well with the base of the stand down and standard supports under the pegs only.
**please click download all! ** This is a super fun glider with a satisfying launcher mechanism that I made on fusion! This is the best thing I have designed on fusion yet, and I will focus more on this kind of thing if it “takes off.” I…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
The official WLAN Pi Handheld case! This case bundles up a WLAN Pi into a nice, handheld formfactor that makes it feel more like a handheld tool than a kit that you have to assemble whenever you arrive onsite to do Wi-Fi work. If you have…
Designed to be printed without supports. My printing settings: Material: Overture Rock PLA (I don't recommend this specific brand personally, for the first layer likes to warp, but YMMV. The looks are dope NGL.) Temp: 220/70 Layer height:…
UPDATE Jan 21: I've just uploaded a file built in Blender 4 (free software) with all options built parametrically so you can easily customize your own stand. If you're new to blender, check out the photo for how to open the Modifiers Tab…
Display your favourite handhelds! I was horrified by big chunky stands so I've made one myself! I have tested it with Steamdeck, PSP, PSVITA, New 2ds XL and DS. It could not work for other handhelds Share your pictures if it worked for…
Here it is! If you seen my previous video you have probably been waiting for this. I will have to warn you guys though, this is not an easy project. I cannot provide technical support if you try to make this and have issues. This is a…
Mimics the sounds of a mouse using squeaky wheels and a print-in-place scratcher. This toy is meant to be used under covers/bedsheets to simulate a “hunt”. Interactive play with cats is important! In your slicer, stand the scratcher up so…
I designed this for a vacuum that was not made to stand up straight or lay down flat, yet remarkably didn't come with a stand or wall mount. The holder provides a good comfortable fit without very little wobble. The screw keyholes fit #8…
Adapter base for full size cordless Dyson vacuums V8 and up. Can be used to design your own adapter for whatever you need it. Designed to print upright in 1 peace with no support. Designed with PETG flexibility in mind. Can't guarantee…
Dreiteiliger Ständer für Barcode Scanner. Zum Unterschied von meinem geschraubten zweiteiligen Modell ist dieses dreiteilig und wird zusammengesteckt und mit Klebstoff gesichert. Gedruckt mit PLA 15% Infill und 2 Perimeter. ……………………………..…
A protective cover for the R36S handheld gaming device. It's designed to be printed in TPU. Maybe it would kinda work in PLA, but haven't tested it.
Handheld bit holder, with a drill bit on it's very useful for cleaning up small holes, can be used to make pilot holes in particle boards. Also great for holding other bits for quick tightening (works really well as an allen wrench).
Better Buttons for the R36s Handheld with tabs, so they don't rotate anymore in the case. Made in 4 Styles: blank Nintendo stlye ABXY Playstation Playstation bold I printed them in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic…
Lock Holder for Euro Cylinder locks - both for handheld- and vise-picking! Can be used with full-, half- and cut cylinders. There's room for the cam (on either sides) in the back. The lock stays in place with a snug friction fit. OpenSCAD…
Simple model to demonstrate interaction between Sun, Earth and Moon. Here is the short assembly video Print Sun in Orange color, Earth in Blue color and Moon in white color. 2mm and 3mm metal rod is used as an axle. Support is required…
Zweiteiliger Ständer für Barcode Scanner. Man benötigt noch einen M6 Gewindeeinsatz zum Einschmelzen und eine M6 x 20 Senkkopfschraube mit Inbus um das Oberteil zu montieren. Gedruckt mit PLA 15% Infill und 4 Perimeter. ……………………. Two-part…
Der Helm wurde 1:1 Konstruiert. Man kann die Datei auf die gewünschte Größe skalieren, die man benötigt (z.B. für Lego Figuren …….) Ich habe ihn mal sehr klein gedruckt. Die *.stl Datei muss gegeben falls repariert werden. The helmet was…
Bosch GAS 18V-1 – Vacuum Cleaner Nozzle A 3D-printable nozzle attachment for the Bosch GAS 18V-1 cordless handheld vacuum cleaner. Available in two variants with different opening sizes to suit your cleaning needs. Variants 5 × 100 mm –…
Convert your Rode Wireless Go II or DJI Mic into a handheld. Yes, it fits both. You can even use the base to make it a tabletop mic for interviews and podcasting! The base has two holders for an angled and vertical option. Let me know…
Requires 8mm threaded rod, length of 25 mm.
Hey, everyone! What's up? Today, I'm excited to take you through the journey of creating this awesome handheld game. Watch Full Video Here:
Overview This is V2 of the original model. A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place , requires no supports , and finishes in about…
Die *.stl Datein müssen repariert werden, dann lassen sie sich problemlos drucken..... The *.stl files need to be repaired so that they can be printed without any problems...
Cheap means to mount an expensive light on your airsoft toy. Suggested to use minimum PLA +/pro, heat warp due to extended use of flashlight is plausible. Parts List: amazon links 1x 40mm M4 screw 2x 30mm M4 screw 3x M4 Nylock Nuts 3x M4…
An RNode is an open, free and unrestricted digital radio transceiver. It enables anyone to send and receive any kind of data over both short and very long distances. RNodes can be used with many different kinds of programs and systems,…
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
This will replace the screw-in cap that holds the brush bar on the motorhead of the vaccum cleaner. I have an old DC44 model, this fits the larger head, but the smaller head uses a similar system and this could be remixed to fit that. Not…
Dyson handheld vacuum nozzle. Who doesn't want this year to suck even more? Works with many Dyson vacuum models (Ive used with handheld and upright vacuums) Print Settings Raft/Brim: Brim ( I recommend using a brim, but have printed…
UPDATE!! Just added 3 new wheels, I can add more if there's interest. Please drop a like if you enjoyed it! Would be fun to see some makes. The threads are meant to be snug, use a little force when screwing the wheels on. Print…
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
https://github.com/geaz/simplyRetro-Z5 This repository contains everything to rebuild the simplyRetro Z5 . The Z5 is my first attempt to build a custom emulation handheld from scratch. It runs a custom linux image for emulation to…
Handy when your busy with house remodeling. Handheld paint and paintbrush holder. Can also be used with small roller (10cm). Be sure to print it with enough walls to make it liquideproof. For paints based on solvants must be printed with…
A fun handheld nerf crossbow. Requires an elastic band. Can be printed entirely in one go on an A1 Mini. The Puller part sometimes needs to be run up and down the crossbow a few times to ensure it releases nicely.
Handheld Heart-shaped Love Cat And Dog wall art
A TPU case for the Datafrog R36S Retro Handheld. There are two designs attached, one that uses the included foam padding found in the box that shipped with the device, and another that is fully TPU with allowances for the screen, buttons…
It's a stand for the cheap Emulation Handheld Data Frog SF2000
My First Cyberdeck! I love experimenting with different electronic components and learning how they work, that’s why I included breadboards in the build. It’s very easy to make: all you need are four VESA screws and some super glue. You…
Be prepared for the future and protect your R36S from the apocalypse with this original Vault-Tec safebox. Now with added pockets for iodine pills (or charging cables). Original case model from here:…
My cyberdeck journey started because I wanted to build a portable computer where I can connect electronic sensors and parts directly to the computer. The first 2 versions had issues that made them unpleasant to use, so I designed the…
A handheld game stand that is fast and cheap to print. Tested with these devices: Gameboy Color, Gameboy Advance, Gameboy Advance SP, gameboy micro, DS, DS lite, 3DS, PSP, and PS Vita consoles. By default it will not fit the original…
This design is a further development of my model 646358. Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a…
In was in need of a stand for my new Ayn Odin gaming handheld, and really liked the look of the design made by “Xomm". I wanted a basic charging stand that would sit on my bedside table, so I have changed the base to remove the cavity…
Stand for displaying your handheld emulation consoles
This adapter for the hollyland lark m1 lets you use one of the lavs as handheld instead. It is designed to be printable in vase mode.I made it with a 0.8 mm nozzle, smaller nozzles are untested. As it is hollow I recommend filling the…
Please use the new version of This Model Overview A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place , requires no supports , and finishes in…
The stl files contain only the shell and circuit inlay, if you also want the inside coloring and text, use the .3mf (text can also easily be changed there, or more colors added). There's a line on the back inside where the base color will…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
I editet the original D-Pad to give it a more nintendo style and smotthed the edges a little bit. Also made two versions inspired by PlayStation D-Pads. I printed it in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic Photon S at…
Bu projede, piyasadaki zayıf şarjlı el süpürgelerinden ilham alarak 10 kat daha güçlü bir versiyon tasarladık. 3D baskı gövdesiyle tamamen yeniden tasarlanan bu mini süpürge, atölyede veya arabada kullanmak için mükemmel. 👉 Tüm yapım…
Created for my DS, 3DS, PSP, and retro emulator handhelds which are all ~20-22mm thick (not including buttons). Holds 7
Clip to hold Hose to Milwaukee M18 Handheld Vacuum. Allows hose to remain attached to vacuum while in use and during storage, without it hanging like an elephants nose when not needed.
Made by Jeroen Pattyn
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
With this dispenser, the tape reel spins freely on the holder. Press your thumb down on the cutter to hold the reel in place and tear. A little tab of tape remains, which makes it easy to start the next piece. This was designed to make it…
Have you ever dreamt of shooting in 720x576 ? Probably not. But here it is anyway. This project fits an Analog FPV Camera and a DVR board in a 3d printed enclosure based 1:1 on a Gopro Session, allowing for handheld, retro style Analog…
This is a 3D printed handle for the 3DMakerpro Moose 3D Scanner. *For this print you will additionally need: 1x O-Ring 10mm Outer Diameter 4mm Inner Diameter 3mm Height 3x Ruber feet 10mm Diameter 2mm Height When using the Moose scanner…
I designed this stand for the jisulife life7 fan, it allows the fan to be used at more angles for example when sitting at a desk. Also ideal for storage as it takes up less horizontal space. Print without supports at 0.2mm. Printed in…
My Blackberry Pi retro-style handheld design introduced by Tom Nardi on Hackaday . I have included more information in my Blackberry Pi project post for this project. Feel free to let me know if you need more information.
I made a ppt microphone for my portable (tr)uSDX ham radio station. It has a compliant mechanism for the ppt button. The microphone is printed in two halves. Print the back and front side of the microphone facing flat side down. The cable…
(Please excuse the stringy photos, should've cleaned it better) A stand for gaming handhelds such as Ayn Odin and Aya Neo. Should work with Steam Deck too, but I don't have mine yet. Should fit fine with a long enough cable and not…
This is a small handheld vacuum that works off of the venturi principal with my compressor air as the source. It just takes an old sock as the bag secured with a string or rubber band. All the parts print upright with support only needed…
The handheld vacuum cleaner WHJC battery handheld vacuum cleaner was the basis for this model. The construction is constructed in such a way that the vacuum cleaner is always at hand. With two screws with a diameter of 4 mm, the holder…
These are two versions of a hard case for the R36H. You can glue 8x3 mm magnets inside. You can modify the original Blender file for a better fit or a different design. The hinge can be fixed in place with a 1.75 mm filament piece. As a…
A bookmark based on the Skyrim Windhelm map marker.
This is a Gaming Stand for almost all handheld devices, be it from nintendo, playstation or other. I've used for both my psp and nintendo ds collection and it hasn't failed me once. It doesn't need any kind of support or platform for…
Battery cover for Tiger Star Trek Next Generation LCD Handheld. May fit other Tiger handhelds. Some (like Sonic 2) are very close in design but slightly smaller so slight modification would be needed. Raft prevents warping and supports…
A simple vacuum holder, mounted with 5mm dry wall screws with conical head. Printed in PLA, but PETG or ABS would work fine as well. The gcode file includes an infill modifier for the mount part.
Additional heads for the Styr-01 handheld robot! This includes: An angry face that can be turned upside down to make a sad/scared faces, A happy face that can be turned upside down to make a tired face, A heart eyed face because…
LUMIERO is a small handheld 35mm projector I designed for a university course on "expanded cinema". It can handle up to 20m of film and uses a camera flash as lightsource(will be changed in future versions). With LUMIERO you as an artist…
This is a stick on tab to fix Zebra printer batteries that have had the tabs broken off, and are now taped in or held in with sticky labels. They will need double sided tape to adhere to the battery, I use and recommend the T-Rex double…
Display your R36S retro handheld on your honeycomb storage wall for easy access. Printed in PETG
*** Work In Progress *** "Inspired" by the Revopoint MIRACO, use your Revopoint Inspire 3D scanner handheld. Allows you to attach your Revopoint Inspire 3D scanner and phone into a single handheld housing to use it handheld. The scanner…
As I lost the original joystick from my BSP-D8 controller, I designed and 3d printed a new one. It has a curved profile for comfort Recommended print settings: Lowest layer height your printer is capable of Print in the provided STL…
I wanted something that can hold a tool like this model , but I wanted to keep the battery installed in the tool. The Craftsman V20 handheld vacuum comes with a crevice tool attachment (7) that stows in the Onboard storage (8) This design…
Bu projede, güçlü hava üfleyebilen kompakt bir şarjlı mini blower yapıyoruz. 3D baskı ile ürettiğimiz parçalar sayesinde hem hafif hem de kolay monte edilebilen bir tasarım ortaya çıkıyor. Elektronik kart temizliği, RC araç bakımı, toz…
Introducing GRIZZLY! I designed this handheld game console to look the way I wish consoles did. I also wrote a step-by-step guide to make it straightforward for anyone to build. This project is completely free to build under the Creative…
![Generic handheld stand [PSP, PSVITA, STEAMDECK, 3DS]](https://media.printables.com/media/prints/581583/images/4642614_437abe6c-c39c-4b2f-b2ba-bd2898c4f4e0/photo_2023-09-13_17-43-21-2.jpg)
